| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Generic FB driver for TFT LCD displays |
| * |
| * Copyright (C) 2013 Noralf Tronnes |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/vmalloc.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/spi/spi.h> |
| #include <linux/delay.h> |
| |
| #include "fbtft.h" |
| |
| #define DRVNAME "flexfb" |
| |
| static char *chip; |
| module_param(chip, charp, 0000); |
| MODULE_PARM_DESC(chip, "LCD controller"); |
| |
| static unsigned int width; |
| module_param(width, uint, 0000); |
| MODULE_PARM_DESC(width, "Display width"); |
| |
| static unsigned int height; |
| module_param(height, uint, 0000); |
| MODULE_PARM_DESC(height, "Display height"); |
| |
| static s16 init[512]; |
| static int init_num; |
| module_param_array(init, short, &init_num, 0000); |
| MODULE_PARM_DESC(init, "Init sequence"); |
| |
| static unsigned int setaddrwin; |
| module_param(setaddrwin, uint, 0000); |
| MODULE_PARM_DESC(setaddrwin, "Which set_addr_win() implementation to use"); |
| |
| static unsigned int buswidth = 8; |
| module_param(buswidth, uint, 0000); |
| MODULE_PARM_DESC(buswidth, "Width of databus (default: 8)"); |
| |
| static unsigned int regwidth = 8; |
| module_param(regwidth, uint, 0000); |
| MODULE_PARM_DESC(regwidth, "Width of controller register (default: 8)"); |
| |
| static bool nobacklight; |
| module_param(nobacklight, bool, 0000); |
| MODULE_PARM_DESC(nobacklight, "Turn off backlight functionality."); |
| |
| static bool latched; |
| module_param(latched, bool, 0000); |
| MODULE_PARM_DESC(latched, "Use with latched 16-bit databus"); |
| |
| static const s16 *initp; |
| static int initp_num; |
| |
| /* default init sequences */ |
| static const s16 st7735r_init[] = { |
| -1, 0x01, |
| -2, 150, |
| -1, 0x11, |
| -2, 500, |
| -1, 0xB1, 0x01, 0x2C, 0x2D, |
| -1, 0xB2, 0x01, 0x2C, 0x2D, |
| -1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D, |
| -1, 0xB4, 0x07, |
| -1, 0xC0, 0xA2, 0x02, 0x84, |
| -1, 0xC1, 0xC5, |
| -1, 0xC2, 0x0A, 0x00, |
| -1, 0xC3, 0x8A, 0x2A, |
| -1, 0xC4, 0x8A, 0xEE, |
| -1, 0xC5, 0x0E, |
| -1, 0x20, |
| -1, 0x36, 0xC0, |
| -1, 0x3A, 0x05, |
| -1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22, |
| 0x1f, 0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10, |
| -1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e, |
| 0x30, 0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10, |
| -1, 0x29, |
| -2, 100, |
| -1, 0x13, |
| -2, 10, |
| -3 |
| }; |
| |
| static const s16 ssd1289_init[] = { |
| -1, 0x00, 0x0001, |
| -1, 0x03, 0xA8A4, |
| -1, 0x0C, 0x0000, |
| -1, 0x0D, 0x080C, |
| -1, 0x0E, 0x2B00, |
| -1, 0x1E, 0x00B7, |
| -1, 0x01, 0x2B3F, |
| -1, 0x02, 0x0600, |
| -1, 0x10, 0x0000, |
| -1, 0x11, 0x6070, |
| -1, 0x05, 0x0000, |
| -1, 0x06, 0x0000, |
| -1, 0x16, 0xEF1C, |
| -1, 0x17, 0x0003, |
| -1, 0x07, 0x0233, |
| -1, 0x0B, 0x0000, |
| -1, 0x0F, 0x0000, |
| -1, 0x41, 0x0000, |
| -1, 0x42, 0x0000, |
| -1, 0x48, 0x0000, |
| -1, 0x49, 0x013F, |
| -1, 0x4A, 0x0000, |
| -1, 0x4B, 0x0000, |
| -1, 0x44, 0xEF00, |
| -1, 0x45, 0x0000, |
| -1, 0x46, 0x013F, |
| -1, 0x30, 0x0707, |
| -1, 0x31, 0x0204, |
| -1, 0x32, 0x0204, |
| -1, 0x33, 0x0502, |
| -1, 0x34, 0x0507, |
| -1, 0x35, 0x0204, |
| -1, 0x36, 0x0204, |
| -1, 0x37, 0x0502, |
| -1, 0x3A, 0x0302, |
| -1, 0x3B, 0x0302, |
| -1, 0x23, 0x0000, |
| -1, 0x24, 0x0000, |
| -1, 0x25, 0x8000, |
| -1, 0x4f, 0x0000, |
| -1, 0x4e, 0x0000, |
| -1, 0x22, |
| -3 |
| }; |
| |
| static const s16 hx8340bn_init[] = { |
| -1, 0xC1, 0xFF, 0x83, 0x40, |
| -1, 0x11, |
| -2, 150, |
| -1, 0xCA, 0x70, 0x00, 0xD9, |
| -1, 0xB0, 0x01, 0x11, |
| -1, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06, |
| -2, 20, |
| -1, 0xC2, 0x60, 0x71, 0x01, 0x0E, 0x05, 0x02, 0x09, 0x31, 0x0A, |
| -1, 0xC3, 0x67, 0x30, 0x61, 0x17, 0x48, 0x07, 0x05, 0x33, |
| -2, 10, |
| -1, 0xB5, 0x35, 0x20, 0x45, |
| -1, 0xB4, 0x33, 0x25, 0x4C, |
| -2, 10, |
| -1, 0x3A, 0x05, |
| -1, 0x29, |
| -2, 10, |
| -3 |
| }; |
| |
| static const s16 ili9225_init[] = { |
| -1, 0x0001, 0x011C, |
| -1, 0x0002, 0x0100, |
| -1, 0x0003, 0x1030, |
| -1, 0x0008, 0x0808, |
| -1, 0x000C, 0x0000, |
| -1, 0x000F, 0x0A01, |
| -1, 0x0020, 0x0000, |
| -1, 0x0021, 0x0000, |
| -2, 50, |
| -1, 0x0010, 0x0A00, |
| -1, 0x0011, 0x1038, |
| -2, 50, |
| -1, 0x0012, 0x1121, |
| -1, 0x0013, 0x004E, |
| -1, 0x0014, 0x676F, |
| -1, 0x0030, 0x0000, |
| -1, 0x0031, 0x00DB, |
| -1, 0x0032, 0x0000, |
| -1, 0x0033, 0x0000, |
| -1, 0x0034, 0x00DB, |
| -1, 0x0035, 0x0000, |
| -1, 0x0036, 0x00AF, |
| -1, 0x0037, 0x0000, |
| -1, 0x0038, 0x00DB, |
| -1, 0x0039, 0x0000, |
| -1, 0x0050, 0x0000, |
| -1, 0x0051, 0x060A, |
| -1, 0x0052, 0x0D0A, |
| -1, 0x0053, 0x0303, |
| -1, 0x0054, 0x0A0D, |
| -1, 0x0055, 0x0A06, |
| -1, 0x0056, 0x0000, |
| -1, 0x0057, 0x0303, |
| -1, 0x0058, 0x0000, |
| -1, 0x0059, 0x0000, |
| -2, 50, |
| -1, 0x0007, 0x1017, |
| -2, 50, |
| -3 |
| }; |
| |
| static const s16 ili9320_init[] = { |
| -1, 0x00E5, 0x8000, |
| -1, 0x0000, 0x0001, |
| -1, 0x0001, 0x0100, |
| -1, 0x0002, 0x0700, |
| -1, 0x0003, 0x1030, |
| -1, 0x0004, 0x0000, |
| -1, 0x0008, 0x0202, |
| -1, 0x0009, 0x0000, |
| -1, 0x000A, 0x0000, |
| -1, 0x000C, 0x0000, |
| -1, 0x000D, 0x0000, |
| -1, 0x000F, 0x0000, |
| -1, 0x0010, 0x0000, |
| -1, 0x0011, 0x0007, |
| -1, 0x0012, 0x0000, |
| -1, 0x0013, 0x0000, |
| -2, 200, |
| -1, 0x0010, 0x17B0, |
| -1, 0x0011, 0x0031, |
| -2, 50, |
| -1, 0x0012, 0x0138, |
| -2, 50, |
| -1, 0x0013, 0x1800, |
| -1, 0x0029, 0x0008, |
| -2, 50, |
| -1, 0x0020, 0x0000, |
| -1, 0x0021, 0x0000, |
| -1, 0x0030, 0x0000, |
| -1, 0x0031, 0x0505, |
| -1, 0x0032, 0x0004, |
| -1, 0x0035, 0x0006, |
| -1, 0x0036, 0x0707, |
| -1, 0x0037, 0x0105, |
| -1, 0x0038, 0x0002, |
| -1, 0x0039, 0x0707, |
| -1, 0x003C, 0x0704, |
| -1, 0x003D, 0x0807, |
| -1, 0x0050, 0x0000, |
| -1, 0x0051, 0x00EF, |
| -1, 0x0052, 0x0000, |
| -1, 0x0053, 0x013F, |
| -1, 0x0060, 0x2700, |
| -1, 0x0061, 0x0001, |
| -1, 0x006A, 0x0000, |
| -1, 0x0080, 0x0000, |
| -1, 0x0081, 0x0000, |
| -1, 0x0082, 0x0000, |
| -1, 0x0083, 0x0000, |
| -1, 0x0084, 0x0000, |
| -1, 0x0085, 0x0000, |
| -1, 0x0090, 0x0010, |
| -1, 0x0092, 0x0000, |
| -1, 0x0093, 0x0003, |
| -1, 0x0095, 0x0110, |
| -1, 0x0097, 0x0000, |
| -1, 0x0098, 0x0000, |
| -1, 0x0007, 0x0173, |
| -3 |
| }; |
| |
| static const s16 ili9325_init[] = { |
| -1, 0x00E3, 0x3008, |
| -1, 0x00E7, 0x0012, |
| -1, 0x00EF, 0x1231, |
| -1, 0x0001, 0x0100, |
| -1, 0x0002, 0x0700, |
| -1, 0x0003, 0x1030, |
| -1, 0x0004, 0x0000, |
| -1, 0x0008, 0x0207, |
| -1, 0x0009, 0x0000, |
| -1, 0x000A, 0x0000, |
| -1, 0x000C, 0x0000, |
| -1, 0x000D, 0x0000, |
| -1, 0x000F, 0x0000, |
| -1, 0x0010, 0x0000, |
| -1, 0x0011, 0x0007, |
| -1, 0x0012, 0x0000, |
| -1, 0x0013, 0x0000, |
| -2, 200, |
| -1, 0x0010, 0x1690, |
| -1, 0x0011, 0x0223, |
| -2, 50, |
| -1, 0x0012, 0x000D, |
| -2, 50, |
| -1, 0x0013, 0x1200, |
| -1, 0x0029, 0x000A, |
| -1, 0x002B, 0x000C, |
| -2, 50, |
| -1, 0x0020, 0x0000, |
| -1, 0x0021, 0x0000, |
| -1, 0x0030, 0x0000, |
| -1, 0x0031, 0x0506, |
| -1, 0x0032, 0x0104, |
| -1, 0x0035, 0x0207, |
| -1, 0x0036, 0x000F, |
| -1, 0x0037, 0x0306, |
| -1, 0x0038, 0x0102, |
| -1, 0x0039, 0x0707, |
| -1, 0x003C, 0x0702, |
| -1, 0x003D, 0x1604, |
| -1, 0x0050, 0x0000, |
| -1, 0x0051, 0x00EF, |
| -1, 0x0052, 0x0000, |
| -1, 0x0053, 0x013F, |
| -1, 0x0060, 0xA700, |
| -1, 0x0061, 0x0001, |
| -1, 0x006A, 0x0000, |
| -1, 0x0080, 0x0000, |
| -1, 0x0081, 0x0000, |
| -1, 0x0082, 0x0000, |
| -1, 0x0083, 0x0000, |
| -1, 0x0084, 0x0000, |
| -1, 0x0085, 0x0000, |
| -1, 0x0090, 0x0010, |
| -1, 0x0092, 0x0600, |
| -1, 0x0007, 0x0133, |
| -3 |
| }; |
| |
| static const s16 ili9341_init[] = { |
| -1, 0x28, |
| -2, 20, |
| -1, 0xCF, 0x00, 0x83, 0x30, |
| -1, 0xED, 0x64, 0x03, 0x12, 0x81, |
| -1, 0xE8, 0x85, 0x01, 0x79, |
| -1, 0xCB, 0x39, 0x2c, 0x00, 0x34, 0x02, |
| -1, 0xF7, 0x20, |
| -1, 0xEA, 0x00, 0x00, |
| -1, 0xC0, 0x26, |
| -1, 0xC1, 0x11, |
| -1, 0xC5, 0x35, 0x3E, |
| -1, 0xC7, 0xBE, |
| -1, 0xB1, 0x00, 0x1B, |
| -1, 0xB6, 0x0a, 0x82, 0x27, 0x00, |
| -1, 0xB7, 0x07, |
| -1, 0x3A, 0x55, |
| -1, 0x36, 0x48, |
| -1, 0x11, |
| -2, 120, |
| -1, 0x29, |
| -2, 20, |
| -3 |
| }; |
| |
| static const s16 ssd1351_init[] = { |
| -1, 0xfd, 0x12, |
| -1, 0xfd, 0xb1, |
| -1, 0xae, |
| -1, 0xb3, 0xf1, |
| -1, 0xca, 0x7f, |
| -1, 0xa0, 0x74, |
| -1, 0x15, 0x00, 0x7f, |
| -1, 0x75, 0x00, 0x7f, |
| -1, 0xa1, 0x00, |
| -1, 0xa2, 0x00, |
| -1, 0xb5, 0x00, |
| -1, 0xab, 0x01, |
| -1, 0xb1, 0x32, |
| -1, 0xb4, 0xa0, 0xb5, 0x55, |
| -1, 0xbb, 0x17, |
| -1, 0xbe, 0x05, |
| -1, 0xc1, 0xc8, 0x80, 0xc8, |
| -1, 0xc7, 0x0f, |
| -1, 0xb6, 0x01, |
| -1, 0xa6, |
| -1, 0xaf, |
| -3 |
| }; |
| |
| /** |
| * struct flexfb_lcd_controller - Describes the LCD controller properties |
| * @name: Model name of the chip |
| * @width: Width of display in pixels |
| * @height: Height of display in pixels |
| * @setaddrwin: Which set_addr_win() implementation to use |
| * @regwidth: LCD Controller Register width in bits |
| * @init_seq: LCD initialization sequence |
| * @init_seq_sz: Size of LCD initialization sequence |
| */ |
| struct flexfb_lcd_controller { |
| const char *name; |
| unsigned int width; |
| unsigned int height; |
| unsigned int setaddrwin; |
| unsigned int regwidth; |
| const s16 *init_seq; |
| int init_seq_sz; |
| }; |
| |
| static const struct flexfb_lcd_controller flexfb_chip_table[] = { |
| { |
| .name = "st7735r", |
| .width = 120, |
| .height = 160, |
| .init_seq = st7735r_init, |
| .init_seq_sz = ARRAY_SIZE(st7735r_init), |
| }, |
| { |
| .name = "hx8340bn", |
| .width = 176, |
| .height = 220, |
| .init_seq = hx8340bn_init, |
| .init_seq_sz = ARRAY_SIZE(hx8340bn_init), |
| }, |
| { |
| .name = "ili9225", |
| .width = 176, |
| .height = 220, |
| .regwidth = 16, |
| .init_seq = ili9225_init, |
| .init_seq_sz = ARRAY_SIZE(ili9225_init), |
| }, |
| { |
| .name = "ili9320", |
| .width = 240, |
| .height = 320, |
| .setaddrwin = 1, |
| .regwidth = 16, |
| .init_seq = ili9320_init, |
| .init_seq_sz = ARRAY_SIZE(ili9320_init), |
| }, |
| { |
| .name = "ili9325", |
| .width = 240, |
| .height = 320, |
| .setaddrwin = 1, |
| .regwidth = 16, |
| .init_seq = ili9325_init, |
| .init_seq_sz = ARRAY_SIZE(ili9325_init), |
| }, |
| { |
| .name = "ili9341", |
| .width = 240, |
| .height = 320, |
| .init_seq = ili9341_init, |
| .init_seq_sz = ARRAY_SIZE(ili9341_init), |
| }, |
| { |
| .name = "ssd1289", |
| .width = 240, |
| .height = 320, |
| .setaddrwin = 2, |
| .regwidth = 16, |
| .init_seq = ssd1289_init, |
| .init_seq_sz = ARRAY_SIZE(ssd1289_init), |
| }, |
| { |
| .name = "ssd1351", |
| .width = 128, |
| .height = 128, |
| .setaddrwin = 3, |
| .init_seq = ssd1351_init, |
| .init_seq_sz = ARRAY_SIZE(ssd1351_init), |
| }, |
| }; |
| |
| /* ili9320, ili9325 */ |
| static void flexfb_set_addr_win_1(struct fbtft_par *par, |
| int xs, int ys, int xe, int ye) |
| { |
| switch (par->info->var.rotate) { |
| /* R20h = Horizontal GRAM Start Address */ |
| /* R21h = Vertical GRAM Start Address */ |
| case 0: |
| write_reg(par, 0x0020, xs); |
| write_reg(par, 0x0021, ys); |
| break; |
| case 180: |
| write_reg(par, 0x0020, width - 1 - xs); |
| write_reg(par, 0x0021, height - 1 - ys); |
| break; |
| case 270: |
| write_reg(par, 0x0020, width - 1 - ys); |
| write_reg(par, 0x0021, xs); |
| break; |
| case 90: |
| write_reg(par, 0x0020, ys); |
| write_reg(par, 0x0021, height - 1 - xs); |
| break; |
| } |
| write_reg(par, 0x0022); /* Write Data to GRAM */ |
| } |
| |
| /* ssd1289 */ |
| static void flexfb_set_addr_win_2(struct fbtft_par *par, |
| int xs, int ys, int xe, int ye) |
| { |
| switch (par->info->var.rotate) { |
| /* R4Eh - Set GDDRAM X address counter */ |
| /* R4Fh - Set GDDRAM Y address counter */ |
| case 0: |
| write_reg(par, 0x4e, xs); |
| write_reg(par, 0x4f, ys); |
| break; |
| case 180: |
| write_reg(par, 0x4e, par->info->var.xres - 1 - xs); |
| write_reg(par, 0x4f, par->info->var.yres - 1 - ys); |
| break; |
| case 270: |
| write_reg(par, 0x4e, par->info->var.yres - 1 - ys); |
| write_reg(par, 0x4f, xs); |
| break; |
| case 90: |
| write_reg(par, 0x4e, ys); |
| write_reg(par, 0x4f, par->info->var.xres - 1 - xs); |
| break; |
| } |
| |
| /* R22h - RAM data write */ |
| write_reg(par, 0x22, 0); |
| } |
| |
| /* ssd1351 */ |
| static void set_addr_win_3(struct fbtft_par *par, |
| int xs, int ys, int xe, int ye) |
| { |
| write_reg(par, 0x15, xs, xe); |
| write_reg(par, 0x75, ys, ye); |
| write_reg(par, 0x5C); |
| } |
| |
| static int flexfb_verify_gpios_dc(struct fbtft_par *par) |
| { |
| fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__); |
| |
| if (!par->gpio.dc) { |
| dev_err(par->info->device, |
| "Missing info about 'dc' gpio. Aborting.\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int flexfb_verify_gpios_db(struct fbtft_par *par) |
| { |
| int i; |
| int num_db = buswidth; |
| |
| fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__); |
| |
| if (!par->gpio.dc) { |
| dev_err(par->info->device, "Missing info about 'dc' gpio. Aborting.\n"); |
| return -EINVAL; |
| } |
| if (!par->gpio.wr) { |
| dev_err(par->info->device, "Missing info about 'wr' gpio. Aborting.\n"); |
| return -EINVAL; |
| } |
| if (latched && !par->gpio.latch) { |
| dev_err(par->info->device, "Missing info about 'latch' gpio. Aborting.\n"); |
| return -EINVAL; |
| } |
| if (latched) |
| num_db = buswidth / 2; |
| for (i = 0; i < num_db; i++) { |
| if (!par->gpio.db[i]) { |
| dev_err(par->info->device, |
| "Missing info about 'db%02d' gpio. Aborting.\n", |
| i); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void flexfb_chip_load_param(const struct flexfb_lcd_controller *chip) |
| { |
| if (!width) |
| width = chip->width; |
| if (!height) |
| height = chip->height; |
| setaddrwin = chip->setaddrwin; |
| if (chip->regwidth) |
| regwidth = chip->regwidth; |
| if (!init_num) { |
| initp = chip->init_seq; |
| initp_num = chip->init_seq_sz; |
| } |
| } |
| |
| static struct fbtft_display flex_display = { }; |
| |
| static int flexfb_chip_init(const struct device *dev) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(flexfb_chip_table); i++) |
| if (!strcmp(chip, flexfb_chip_table[i].name)) { |
| flexfb_chip_load_param(&flexfb_chip_table[i]); |
| return 0; |
| } |
| |
| dev_err(dev, "chip=%s is not supported\n", chip); |
| |
| return -EINVAL; |
| } |
| |
| static int flexfb_probe_common(struct spi_device *sdev, |
| struct platform_device *pdev) |
| { |
| struct device *dev; |
| struct fb_info *info; |
| struct fbtft_par *par; |
| int ret; |
| |
| initp = init; |
| initp_num = init_num; |
| |
| if (sdev) |
| dev = &sdev->dev; |
| else |
| dev = &pdev->dev; |
| |
| fbtft_init_dbg(dev, "%s(%s)\n", __func__, |
| sdev ? "'SPI device'" : "'Platform device'"); |
| |
| if (chip) { |
| ret = flexfb_chip_init(dev); |
| if (ret) |
| return ret; |
| } |
| |
| if (width == 0 || height == 0) { |
| dev_err(dev, "argument(s) missing: width and height has to be set.\n"); |
| return -EINVAL; |
| } |
| flex_display.width = width; |
| flex_display.height = height; |
| fbtft_init_dbg(dev, "Display resolution: %dx%d\n", width, height); |
| fbtft_init_dbg(dev, "chip = %s\n", chip ? chip : "not set"); |
| fbtft_init_dbg(dev, "setaddrwin = %d\n", setaddrwin); |
| fbtft_init_dbg(dev, "regwidth = %d\n", regwidth); |
| fbtft_init_dbg(dev, "buswidth = %d\n", buswidth); |
| |
| info = fbtft_framebuffer_alloc(&flex_display, dev, dev->platform_data); |
| if (!info) |
| return -ENOMEM; |
| |
| par = info->par; |
| if (sdev) |
| par->spi = sdev; |
| else |
| par->pdev = pdev; |
| if (!par->init_sequence) |
| par->init_sequence = initp; |
| par->fbtftops.init_display = fbtft_init_display; |
| |
| /* registerwrite functions */ |
| switch (regwidth) { |
| case 8: |
| par->fbtftops.write_register = fbtft_write_reg8_bus8; |
| break; |
| case 16: |
| par->fbtftops.write_register = fbtft_write_reg16_bus8; |
| break; |
| default: |
| dev_err(dev, |
| "argument 'regwidth': %d is not supported.\n", |
| regwidth); |
| return -EINVAL; |
| } |
| |
| /* bus functions */ |
| if (sdev) { |
| par->fbtftops.write = fbtft_write_spi; |
| switch (buswidth) { |
| case 8: |
| par->fbtftops.write_vmem = fbtft_write_vmem16_bus8; |
| if (!par->startbyte) |
| par->fbtftops.verify_gpios = flexfb_verify_gpios_dc; |
| break; |
| case 9: |
| if (regwidth == 16) { |
| dev_err(dev, "argument 'regwidth': %d is not supported with buswidth=%d and SPI.\n", |
| regwidth, buswidth); |
| return -EINVAL; |
| } |
| par->fbtftops.write_register = fbtft_write_reg8_bus9; |
| par->fbtftops.write_vmem = fbtft_write_vmem16_bus9; |
| if (par->spi->master->bits_per_word_mask |
| & SPI_BPW_MASK(9)) { |
| par->spi->bits_per_word = 9; |
| break; |
| } |
| |
| dev_warn(dev, |
| "9-bit SPI not available, emulating using 8-bit.\n"); |
| /* allocate buffer with room for dc bits */ |
| par->extra = devm_kzalloc(par->info->device, |
| par->txbuf.len |
| + (par->txbuf.len / 8) + 8, |
| GFP_KERNEL); |
| if (!par->extra) { |
| ret = -ENOMEM; |
| goto out_release; |
| } |
| par->fbtftops.write = fbtft_write_spi_emulate_9; |
| |
| break; |
| default: |
| dev_err(dev, |
| "argument 'buswidth': %d is not supported with SPI.\n", |
| buswidth); |
| return -EINVAL; |
| } |
| } else { |
| par->fbtftops.verify_gpios = flexfb_verify_gpios_db; |
| switch (buswidth) { |
| case 8: |
| par->fbtftops.write = fbtft_write_gpio8_wr; |
| par->fbtftops.write_vmem = fbtft_write_vmem16_bus8; |
| break; |
| case 16: |
| par->fbtftops.write_register = fbtft_write_reg16_bus16; |
| if (latched) |
| par->fbtftops.write = fbtft_write_gpio16_wr_latched; |
| else |
| par->fbtftops.write = fbtft_write_gpio16_wr; |
| par->fbtftops.write_vmem = fbtft_write_vmem16_bus16; |
| break; |
| default: |
| dev_err(dev, |
| "argument 'buswidth': %d is not supported with parallel.\n", |
| buswidth); |
| return -EINVAL; |
| } |
| } |
| |
| /* set_addr_win function */ |
| switch (setaddrwin) { |
| case 0: |
| /* use default */ |
| break; |
| case 1: |
| par->fbtftops.set_addr_win = flexfb_set_addr_win_1; |
| break; |
| case 2: |
| par->fbtftops.set_addr_win = flexfb_set_addr_win_2; |
| break; |
| case 3: |
| par->fbtftops.set_addr_win = set_addr_win_3; |
| break; |
| default: |
| dev_err(dev, "argument 'setaddrwin': unknown value %d.\n", |
| setaddrwin); |
| return -EINVAL; |
| } |
| |
| if (!nobacklight) |
| par->fbtftops.register_backlight = fbtft_register_backlight; |
| |
| ret = fbtft_register_framebuffer(info); |
| if (ret < 0) |
| goto out_release; |
| |
| return 0; |
| |
| out_release: |
| fbtft_framebuffer_release(info); |
| |
| return ret; |
| } |
| |
| static int flexfb_remove_common(struct device *dev, struct fb_info *info) |
| { |
| struct fbtft_par *par; |
| |
| if (!info) |
| return -EINVAL; |
| par = info->par; |
| if (par) |
| fbtft_par_dbg(DEBUG_DRIVER_INIT_FUNCTIONS, par, "%s()\n", |
| __func__); |
| fbtft_unregister_framebuffer(info); |
| fbtft_framebuffer_release(info); |
| |
| return 0; |
| } |
| |
| static int flexfb_probe_spi(struct spi_device *spi) |
| { |
| return flexfb_probe_common(spi, NULL); |
| } |
| |
| static int flexfb_remove_spi(struct spi_device *spi) |
| { |
| struct fb_info *info = spi_get_drvdata(spi); |
| |
| return flexfb_remove_common(&spi->dev, info); |
| } |
| |
| static int flexfb_probe_pdev(struct platform_device *pdev) |
| { |
| return flexfb_probe_common(NULL, pdev); |
| } |
| |
| static int flexfb_remove_pdev(struct platform_device *pdev) |
| { |
| struct fb_info *info = platform_get_drvdata(pdev); |
| |
| return flexfb_remove_common(&pdev->dev, info); |
| } |
| |
| static struct spi_driver flexfb_spi_driver = { |
| .driver = { |
| .name = DRVNAME, |
| }, |
| .probe = flexfb_probe_spi, |
| .remove = flexfb_remove_spi, |
| }; |
| |
| static const struct platform_device_id flexfb_platform_ids[] = { |
| { "flexpfb", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, flexfb_platform_ids); |
| |
| static struct platform_driver flexfb_platform_driver = { |
| .driver = { |
| .name = DRVNAME, |
| }, |
| .id_table = flexfb_platform_ids, |
| .probe = flexfb_probe_pdev, |
| .remove = flexfb_remove_pdev, |
| }; |
| |
| static int __init flexfb_init(void) |
| { |
| int ret, ret2; |
| |
| ret = spi_register_driver(&flexfb_spi_driver); |
| ret2 = platform_driver_register(&flexfb_platform_driver); |
| if (ret < 0) |
| return ret; |
| return ret2; |
| } |
| |
| static void __exit flexfb_exit(void) |
| { |
| spi_unregister_driver(&flexfb_spi_driver); |
| platform_driver_unregister(&flexfb_platform_driver); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| module_init(flexfb_init); |
| module_exit(flexfb_exit); |
| |
| MODULE_DESCRIPTION("Generic FB driver for TFT LCD displays"); |
| MODULE_AUTHOR("Noralf Tronnes"); |
| MODULE_LICENSE("GPL"); |