| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd |
| */ |
| |
| /dts-v1/; |
| #include "rk3308.dtsi" |
| |
| / { |
| model = "Firefly ROC-RK3308-CC board"; |
| compatible = "firefly,roc-rk3308-cc", "rockchip,rk3308"; |
| chosen { |
| stdout-path = "serial2:1500000n8"; |
| }; |
| |
| ir_rx { |
| compatible = "gpio-ir-receiver"; |
| gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ir_recv_pin>; |
| }; |
| |
| ir_tx { |
| compatible = "pwm-ir-tx"; |
| pwms = <&pwm5 0 25000 0>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| power_led: led-0 { |
| label = "firefly:red:power"; |
| linux,default-trigger = "ir-power-click"; |
| default-state = "on"; |
| gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| user_led: led-1 { |
| label = "firefly:blue:user"; |
| linux,default-trigger = "ir-user-click"; |
| default-state = "off"; |
| gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| typec_vcc5v: typec-vcc5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "typec_vcc5v"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vcc5v0_sys: vcc5v0-sys { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc5v0_sys"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| vin-supply = <&typec_vcc5v>; |
| }; |
| |
| vcc_io: vcc-io { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_io"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| vin-supply = <&vcc5v0_sys>; |
| }; |
| |
| vcc_sdmmc: vcc-sdmmc { |
| compatible = "regulator-gpio"; |
| regulator-name = "vcc_sdmmc"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>; |
| states = <1800000 0x0 |
| 3300000 0x1>; |
| vin-supply = <&vcc5v0_sys>; |
| }; |
| |
| vcc_sd: vcc-sd { |
| compatible = "regulator-fixed"; |
| gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>; |
| regulator-name = "vcc_sd"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| vim-supply = <&vcc_io>; |
| }; |
| |
| vdd_core: vdd-core { |
| compatible = "pwm-regulator"; |
| pwms = <&pwm0 0 5000 1>; |
| regulator-name = "vdd_core"; |
| regulator-min-microvolt = <827000>; |
| regulator-max-microvolt = <1340000>; |
| regulator-init-microvolt = <1015000>; |
| regulator-settling-time-up-us = <250>; |
| regulator-always-on; |
| regulator-boot-on; |
| pwm-supply = <&vcc5v0_sys>; |
| }; |
| |
| vdd_log: vdd-log { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_log"; |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| regulator-always-on; |
| regulator-boot-on; |
| vin-supply = <&vcc5v0_sys>; |
| }; |
| }; |
| |
| &cpu0 { |
| cpu-supply = <&vdd_core>; |
| }; |
| |
| &emmc { |
| cap-mmc-highspeed; |
| mmc-hs200-1_8v; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| rtc: rtc@51 { |
| compatible = "nxp,pcf8563"; |
| reg = <0x51>; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| &pwm5 { |
| status = "okay"; |
| pinctrl-names = "active"; |
| pinctrl-0 = <&pwm5_pin_pull_down>; |
| }; |
| |
| &pinctrl { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rtc_32k>; |
| |
| ir-receiver { |
| ir_recv_pin: ir-recv-pin { |
| rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| buttons { |
| pwr_key: pwr-key { |
| rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| }; |
| }; |
| |
| &pwm0 { |
| status = "okay"; |
| pinctrl-0 = <&pwm0_pin_pull_down>; |
| }; |
| |
| &sdmmc { |
| cap-mmc-highspeed; |
| cap-sd-highspeed; |
| card-detect-delay = <300>; |
| sd-uhs-sdr25; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| vmmc-supply = <&vcc_sd>; |
| vqmmc-supply = <&vcc_sdmmc>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| status = "okay"; |
| }; |