| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ip27-irq.c: Highlevel interrupt handling for IP27 architecture. |
| * |
| * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org) |
| * Copyright (C) 1999, 2000 Silicon Graphics, Inc. |
| * Copyright (C) 1999 - 2001 Kanoj Sarcar |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/bitops.h> |
| #include <linux/sched.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq_cpu.h> |
| #include <asm/sn/addrs.h> |
| #include <asm/sn/agent.h> |
| #include <asm/sn/arch.h> |
| #include <asm/sn/intr.h> |
| #include <asm/sn/irq_alloc.h> |
| |
| struct hub_irq_data { |
| u64 *irq_mask[2]; |
| cpuid_t cpu; |
| }; |
| |
| static DECLARE_BITMAP(hub_irq_map, IP27_HUB_IRQ_COUNT); |
| |
| static DEFINE_PER_CPU(unsigned long [2], irq_enable_mask); |
| |
| static inline int alloc_level(void) |
| { |
| int level; |
| |
| again: |
| level = find_first_zero_bit(hub_irq_map, IP27_HUB_IRQ_COUNT); |
| if (level >= IP27_HUB_IRQ_COUNT) |
| return -ENOSPC; |
| |
| if (test_and_set_bit(level, hub_irq_map)) |
| goto again; |
| |
| return level; |
| } |
| |
| static void enable_hub_irq(struct irq_data *d) |
| { |
| struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); |
| unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu); |
| |
| set_bit(d->hwirq, mask); |
| __raw_writeq(mask[0], hd->irq_mask[0]); |
| __raw_writeq(mask[1], hd->irq_mask[1]); |
| } |
| |
| static void disable_hub_irq(struct irq_data *d) |
| { |
| struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); |
| unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu); |
| |
| clear_bit(d->hwirq, mask); |
| __raw_writeq(mask[0], hd->irq_mask[0]); |
| __raw_writeq(mask[1], hd->irq_mask[1]); |
| } |
| |
| static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask) |
| { |
| nasid_t nasid; |
| int cpu; |
| |
| cpu = cpumask_first_and(mask, cpu_online_mask); |
| if (cpu >= nr_cpu_ids) |
| cpu = cpumask_any(cpu_online_mask); |
| |
| nasid = cpu_to_node(cpu); |
| hd->cpu = cpu; |
| if (!cputoslice(cpu)) { |
| hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_A); |
| hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_A); |
| } else { |
| hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_B); |
| hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_B); |
| } |
| } |
| |
| static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask, |
| bool force) |
| { |
| struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); |
| |
| if (!hd) |
| return -EINVAL; |
| |
| if (irqd_is_started(d)) |
| disable_hub_irq(d); |
| |
| setup_hub_mask(hd, mask); |
| |
| if (irqd_is_started(d)) |
| enable_hub_irq(d); |
| |
| irq_data_update_effective_affinity(d, cpumask_of(hd->cpu)); |
| |
| return 0; |
| } |
| |
| static struct irq_chip hub_irq_type = { |
| .name = "HUB", |
| .irq_mask = disable_hub_irq, |
| .irq_unmask = enable_hub_irq, |
| .irq_set_affinity = set_affinity_hub_irq, |
| }; |
| |
| static int hub_domain_alloc(struct irq_domain *domain, unsigned int virq, |
| unsigned int nr_irqs, void *arg) |
| { |
| struct irq_alloc_info *info = arg; |
| struct hub_irq_data *hd; |
| struct hub_data *hub; |
| struct irq_desc *desc; |
| int swlevel; |
| |
| if (nr_irqs > 1 || !info) |
| return -EINVAL; |
| |
| hd = kzalloc(sizeof(*hd), GFP_KERNEL); |
| if (!hd) |
| return -ENOMEM; |
| |
| swlevel = alloc_level(); |
| if (unlikely(swlevel < 0)) { |
| kfree(hd); |
| return -EAGAIN; |
| } |
| irq_domain_set_info(domain, virq, swlevel, &hub_irq_type, hd, |
| handle_level_irq, NULL, NULL); |
| |
| /* use CPU connected to nearest hub */ |
| hub = hub_data(info->nasid); |
| setup_hub_mask(hd, &hub->h_cpus); |
| info->nasid = cpu_to_node(hd->cpu); |
| |
| /* Make sure it's not already pending when we connect it. */ |
| REMOTE_HUB_CLR_INTR(info->nasid, swlevel); |
| |
| desc = irq_to_desc(virq); |
| desc->irq_common_data.node = info->nasid; |
| cpumask_copy(desc->irq_common_data.affinity, &hub->h_cpus); |
| |
| return 0; |
| } |
| |
| static void hub_domain_free(struct irq_domain *domain, |
| unsigned int virq, unsigned int nr_irqs) |
| { |
| struct irq_data *irqd; |
| |
| if (nr_irqs > 1) |
| return; |
| |
| irqd = irq_domain_get_irq_data(domain, virq); |
| if (irqd && irqd->chip_data) |
| kfree(irqd->chip_data); |
| } |
| |
| static const struct irq_domain_ops hub_domain_ops = { |
| .alloc = hub_domain_alloc, |
| .free = hub_domain_free, |
| }; |
| |
| /* |
| * This code is unnecessarily complex, because we do |
| * intr enabling. Basically, once we grab the set of intrs we need |
| * to service, we must mask _all_ these interrupts; firstly, to make |
| * sure the same intr does not intr again, causing recursion that |
| * can lead to stack overflow. Secondly, we can not just mask the |
| * one intr we are do_IRQing, because the non-masked intrs in the |
| * first set might intr again, causing multiple servicings of the |
| * same intr. This effect is mostly seen for intercpu intrs. |
| * Kanoj 05.13.00 |
| */ |
| |
| static void ip27_do_irq_mask0(struct irq_desc *desc) |
| { |
| cpuid_t cpu = smp_processor_id(); |
| unsigned long *mask = per_cpu(irq_enable_mask, cpu); |
| struct irq_domain *domain; |
| u64 pend0; |
| int irq; |
| |
| /* copied from Irix intpend0() */ |
| pend0 = LOCAL_HUB_L(PI_INT_PEND0); |
| |
| pend0 &= mask[0]; /* Pick intrs we should look at */ |
| if (!pend0) |
| return; |
| |
| #ifdef CONFIG_SMP |
| if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) { |
| LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ); |
| scheduler_ipi(); |
| } else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) { |
| LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ); |
| scheduler_ipi(); |
| } else if (pend0 & (1UL << CPU_CALL_A_IRQ)) { |
| LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ); |
| generic_smp_call_function_interrupt(); |
| } else if (pend0 & (1UL << CPU_CALL_B_IRQ)) { |
| LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ); |
| generic_smp_call_function_interrupt(); |
| } else |
| #endif |
| { |
| domain = irq_desc_get_handler_data(desc); |
| irq = irq_linear_revmap(domain, __ffs(pend0)); |
| if (irq) |
| generic_handle_irq(irq); |
| else |
| spurious_interrupt(); |
| } |
| |
| LOCAL_HUB_L(PI_INT_PEND0); |
| } |
| |
| static void ip27_do_irq_mask1(struct irq_desc *desc) |
| { |
| cpuid_t cpu = smp_processor_id(); |
| unsigned long *mask = per_cpu(irq_enable_mask, cpu); |
| struct irq_domain *domain; |
| u64 pend1; |
| int irq; |
| |
| /* copied from Irix intpend0() */ |
| pend1 = LOCAL_HUB_L(PI_INT_PEND1); |
| |
| pend1 &= mask[1]; /* Pick intrs we should look at */ |
| if (!pend1) |
| return; |
| |
| domain = irq_desc_get_handler_data(desc); |
| irq = irq_linear_revmap(domain, __ffs(pend1) + 64); |
| if (irq) |
| generic_handle_irq(irq); |
| else |
| spurious_interrupt(); |
| |
| LOCAL_HUB_L(PI_INT_PEND1); |
| } |
| |
| void install_ipi(void) |
| { |
| int cpu = smp_processor_id(); |
| unsigned long *mask = per_cpu(irq_enable_mask, cpu); |
| int slice = LOCAL_HUB_L(PI_CPU_NUM); |
| int resched, call; |
| |
| resched = CPU_RESCHED_A_IRQ + slice; |
| set_bit(resched, mask); |
| LOCAL_HUB_CLR_INTR(resched); |
| |
| call = CPU_CALL_A_IRQ + slice; |
| set_bit(call, mask); |
| LOCAL_HUB_CLR_INTR(call); |
| |
| if (slice == 0) { |
| LOCAL_HUB_S(PI_INT_MASK0_A, mask[0]); |
| LOCAL_HUB_S(PI_INT_MASK1_A, mask[1]); |
| } else { |
| LOCAL_HUB_S(PI_INT_MASK0_B, mask[0]); |
| LOCAL_HUB_S(PI_INT_MASK1_B, mask[1]); |
| } |
| } |
| |
| void __init arch_init_irq(void) |
| { |
| struct irq_domain *domain; |
| struct fwnode_handle *fn; |
| int i; |
| |
| mips_cpu_irq_init(); |
| |
| /* |
| * Some interrupts are reserved by hardware or by software convention. |
| * Mark these as reserved right away so they won't be used accidentally |
| * later. |
| */ |
| for (i = 0; i <= CPU_CALL_B_IRQ; i++) |
| set_bit(i, hub_irq_map); |
| |
| for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) |
| set_bit(i, hub_irq_map); |
| |
| fn = irq_domain_alloc_named_fwnode("HUB"); |
| WARN_ON(fn == NULL); |
| if (!fn) |
| return; |
| domain = irq_domain_create_linear(fn, IP27_HUB_IRQ_COUNT, |
| &hub_domain_ops, NULL); |
| WARN_ON(domain == NULL); |
| if (!domain) |
| return; |
| |
| irq_set_default_host(domain); |
| |
| irq_set_percpu_devid(IP27_HUB_PEND0_IRQ); |
| irq_set_chained_handler_and_data(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0, |
| domain); |
| irq_set_percpu_devid(IP27_HUB_PEND1_IRQ); |
| irq_set_chained_handler_and_data(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1, |
| domain); |
| } |