| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * |
| * Bluetooth support for Intel devices |
| * |
| * Copyright (C) 2015 Intel Corporation |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <linux/regmap.h> |
| #include <asm/unaligned.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "btintel.h" |
| |
| #define VERSION "0.1" |
| |
| #define BDADDR_INTEL (&(bdaddr_t){{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}}) |
| #define RSA_HEADER_LEN 644 |
| #define CSS_HEADER_OFFSET 8 |
| #define ECDSA_OFFSET 644 |
| #define ECDSA_HEADER_LEN 320 |
| |
| int btintel_check_bdaddr(struct hci_dev *hdev) |
| { |
| struct hci_rp_read_bd_addr *bda; |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| int err = PTR_ERR(skb); |
| bt_dev_err(hdev, "Reading Intel device address failed (%d)", |
| err); |
| return err; |
| } |
| |
| if (skb->len != sizeof(*bda)) { |
| bt_dev_err(hdev, "Intel device address length mismatch"); |
| kfree_skb(skb); |
| return -EIO; |
| } |
| |
| bda = (struct hci_rp_read_bd_addr *)skb->data; |
| |
| /* For some Intel based controllers, the default Bluetooth device |
| * address 00:03:19:9E:8B:00 can be found. These controllers are |
| * fully operational, but have the danger of duplicate addresses |
| * and that in turn can cause problems with Bluetooth operation. |
| */ |
| if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) { |
| bt_dev_err(hdev, "Found Intel default device address (%pMR)", |
| &bda->bdaddr); |
| set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); |
| } |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_check_bdaddr); |
| |
| int btintel_enter_mfg(struct hci_dev *hdev) |
| { |
| static const u8 param[] = { 0x01, 0x00 }; |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Entering manufacturer mode failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_enter_mfg); |
| |
| int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched) |
| { |
| u8 param[] = { 0x00, 0x00 }; |
| struct sk_buff *skb; |
| |
| /* The 2nd command parameter specifies the manufacturing exit method: |
| * 0x00: Just disable the manufacturing mode (0x00). |
| * 0x01: Disable manufacturing mode and reset with patches deactivated. |
| * 0x02: Disable manufacturing mode and reset with patches activated. |
| */ |
| if (reset) |
| param[1] |= patched ? 0x02 : 0x01; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Exiting manufacturer mode failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_exit_mfg); |
| |
| int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) |
| { |
| struct sk_buff *skb; |
| int err; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(hdev, "Changing Intel device address failed (%d)", |
| err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_bdaddr); |
| |
| int btintel_set_diag(struct hci_dev *hdev, bool enable) |
| { |
| struct sk_buff *skb; |
| u8 param[3]; |
| int err; |
| |
| if (enable) { |
| param[0] = 0x03; |
| param[1] = 0x03; |
| param[2] = 0x03; |
| } else { |
| param[0] = 0x00; |
| param[1] = 0x00; |
| param[2] = 0x00; |
| } |
| |
| skb = __hci_cmd_sync(hdev, 0xfc43, 3, param, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| if (err == -ENODATA) |
| goto done; |
| bt_dev_err(hdev, "Changing Intel diagnostic mode failed (%d)", |
| err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| done: |
| btintel_set_event_mask(hdev, enable); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_diag); |
| |
| int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable) |
| { |
| int err, ret; |
| |
| err = btintel_enter_mfg(hdev); |
| if (err) |
| return err; |
| |
| ret = btintel_set_diag(hdev, enable); |
| |
| err = btintel_exit_mfg(hdev, false, false); |
| if (err) |
| return err; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_diag_mfg); |
| |
| void btintel_hw_error(struct hci_dev *hdev, u8 code) |
| { |
| struct sk_buff *skb; |
| u8 type = 0x00; |
| |
| bt_dev_err(hdev, "Hardware error 0x%2.2x", code); |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Reset after hardware error failed (%ld)", |
| PTR_ERR(skb)); |
| return; |
| } |
| kfree_skb(skb); |
| |
| skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Retrieving Intel exception info failed (%ld)", |
| PTR_ERR(skb)); |
| return; |
| } |
| |
| if (skb->len != 13) { |
| bt_dev_err(hdev, "Exception info size mismatch"); |
| kfree_skb(skb); |
| return; |
| } |
| |
| bt_dev_err(hdev, "Exception info %s", (char *)(skb->data + 1)); |
| |
| kfree_skb(skb); |
| } |
| EXPORT_SYMBOL_GPL(btintel_hw_error); |
| |
| void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver) |
| { |
| const char *variant; |
| |
| switch (ver->fw_variant) { |
| case 0x06: |
| variant = "Bootloader"; |
| break; |
| case 0x23: |
| variant = "Firmware"; |
| break; |
| default: |
| return; |
| } |
| |
| bt_dev_info(hdev, "%s revision %u.%u build %u week %u %u", |
| variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f, |
| ver->fw_build_num, ver->fw_build_ww, |
| 2000 + ver->fw_build_yy); |
| } |
| EXPORT_SYMBOL_GPL(btintel_version_info); |
| |
| int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen, |
| const void *param) |
| { |
| while (plen > 0) { |
| struct sk_buff *skb; |
| u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen; |
| |
| cmd_param[0] = fragment_type; |
| memcpy(cmd_param + 1, param, fragment_len); |
| |
| skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1, |
| cmd_param, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| kfree_skb(skb); |
| |
| plen -= fragment_len; |
| param += fragment_len; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_secure_send); |
| |
| int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name) |
| { |
| const struct firmware *fw; |
| struct sk_buff *skb; |
| const u8 *fw_ptr; |
| int err; |
| |
| err = request_firmware_direct(&fw, ddc_name, &hdev->dev); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to load Intel DDC file %s (%d)", |
| ddc_name, err); |
| return err; |
| } |
| |
| bt_dev_info(hdev, "Found Intel DDC parameters: %s", ddc_name); |
| |
| fw_ptr = fw->data; |
| |
| /* DDC file contains one or more DDC structure which has |
| * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2). |
| */ |
| while (fw->size > fw_ptr - fw->data) { |
| u8 cmd_plen = fw_ptr[0] + sizeof(u8); |
| |
| skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Failed to send Intel_Write_DDC (%ld)", |
| PTR_ERR(skb)); |
| release_firmware(fw); |
| return PTR_ERR(skb); |
| } |
| |
| fw_ptr += cmd_plen; |
| kfree_skb(skb); |
| } |
| |
| release_firmware(fw); |
| |
| bt_dev_info(hdev, "Applying Intel DDC parameters completed"); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_load_ddc_config); |
| |
| int btintel_set_event_mask(struct hci_dev *hdev, bool debug) |
| { |
| u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| struct sk_buff *skb; |
| int err; |
| |
| if (debug) |
| mask[1] |= 0x62; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_event_mask); |
| |
| int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug) |
| { |
| int err, ret; |
| |
| err = btintel_enter_mfg(hdev); |
| if (err) |
| return err; |
| |
| ret = btintel_set_event_mask(hdev, debug); |
| |
| err = btintel_exit_mfg(hdev, false, false); |
| if (err) |
| return err; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_event_mask_mfg); |
| |
| int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Reading Intel version information failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| |
| if (skb->len != sizeof(*ver)) { |
| bt_dev_err(hdev, "Intel version event size mismatch"); |
| kfree_skb(skb); |
| return -EILSEQ; |
| } |
| |
| memcpy(ver, skb->data, sizeof(*ver)); |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_read_version); |
| |
| void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version) |
| { |
| const char *variant; |
| |
| switch (version->img_type) { |
| case 0x01: |
| variant = "Bootloader"; |
| bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id); |
| bt_dev_info(hdev, "Secure boot is %s", |
| version->secure_boot ? "enabled" : "disabled"); |
| bt_dev_info(hdev, "OTP lock is %s", |
| version->otp_lock ? "enabled" : "disabled"); |
| bt_dev_info(hdev, "API lock is %s", |
| version->api_lock ? "enabled" : "disabled"); |
| bt_dev_info(hdev, "Debug lock is %s", |
| version->debug_lock ? "enabled" : "disabled"); |
| bt_dev_info(hdev, "Minimum firmware build %u week %u %u", |
| version->min_fw_build_nn, version->min_fw_build_cw, |
| 2000 + version->min_fw_build_yy); |
| break; |
| case 0x03: |
| variant = "Firmware"; |
| break; |
| default: |
| bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type); |
| goto done; |
| } |
| |
| bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant, |
| 2000 + (version->timestamp >> 8), version->timestamp & 0xff, |
| version->build_type, version->build_num); |
| |
| done: |
| return; |
| } |
| EXPORT_SYMBOL_GPL(btintel_version_info_tlv); |
| |
| int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version) |
| { |
| struct sk_buff *skb; |
| const u8 param[1] = { 0xFF }; |
| |
| if (!version) |
| return -EINVAL; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Reading Intel version information failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| |
| if (skb->data[0]) { |
| bt_dev_err(hdev, "Intel Read Version command failed (%02x)", |
| skb->data[0]); |
| kfree_skb(skb); |
| return -EIO; |
| } |
| |
| /* Consume Command Complete Status field */ |
| skb_pull(skb, 1); |
| |
| /* Event parameters contatin multiple TLVs. Read each of them |
| * and only keep the required data. Also, it use existing legacy |
| * version field like hw_platform, hw_variant, and fw_variant |
| * to keep the existing setup flow |
| */ |
| while (skb->len) { |
| struct intel_tlv *tlv; |
| |
| tlv = (struct intel_tlv *)skb->data; |
| switch (tlv->type) { |
| case INTEL_TLV_CNVI_TOP: |
| version->cnvi_top = |
| __le32_to_cpu(get_unaligned_le32(tlv->val)); |
| break; |
| case INTEL_TLV_CNVR_TOP: |
| version->cnvr_top = |
| __le32_to_cpu(get_unaligned_le32(tlv->val)); |
| break; |
| case INTEL_TLV_CNVI_BT: |
| version->cnvi_bt = |
| __le32_to_cpu(get_unaligned_le32(tlv->val)); |
| break; |
| case INTEL_TLV_CNVR_BT: |
| version->cnvr_bt = |
| __le32_to_cpu(get_unaligned_le32(tlv->val)); |
| break; |
| case INTEL_TLV_DEV_REV_ID: |
| version->dev_rev_id = |
| __le16_to_cpu(get_unaligned_le16(tlv->val)); |
| break; |
| case INTEL_TLV_IMAGE_TYPE: |
| version->img_type = tlv->val[0]; |
| break; |
| case INTEL_TLV_TIME_STAMP: |
| version->timestamp = |
| __le16_to_cpu(get_unaligned_le16(tlv->val)); |
| break; |
| case INTEL_TLV_BUILD_TYPE: |
| version->build_type = tlv->val[0]; |
| break; |
| case INTEL_TLV_BUILD_NUM: |
| version->build_num = |
| __le32_to_cpu(get_unaligned_le32(tlv->val)); |
| break; |
| case INTEL_TLV_SECURE_BOOT: |
| version->secure_boot = tlv->val[0]; |
| break; |
| case INTEL_TLV_OTP_LOCK: |
| version->otp_lock = tlv->val[0]; |
| break; |
| case INTEL_TLV_API_LOCK: |
| version->api_lock = tlv->val[0]; |
| break; |
| case INTEL_TLV_DEBUG_LOCK: |
| version->debug_lock = tlv->val[0]; |
| break; |
| case INTEL_TLV_MIN_FW: |
| version->min_fw_build_nn = tlv->val[0]; |
| version->min_fw_build_cw = tlv->val[1]; |
| version->min_fw_build_yy = tlv->val[2]; |
| break; |
| case INTEL_TLV_LIMITED_CCE: |
| version->limited_cce = tlv->val[0]; |
| break; |
| case INTEL_TLV_SBE_TYPE: |
| version->sbe_type = tlv->val[0]; |
| break; |
| case INTEL_TLV_OTP_BDADDR: |
| memcpy(&version->otp_bd_addr, tlv->val, tlv->len); |
| break; |
| default: |
| /* Ignore rest of information */ |
| break; |
| } |
| /* consume the current tlv and move to next*/ |
| skb_pull(skb, tlv->len + sizeof(*tlv)); |
| } |
| |
| kfree_skb(skb); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_read_version_tlv); |
| |
| /* ------- REGMAP IBT SUPPORT ------- */ |
| |
| #define IBT_REG_MODE_8BIT 0x00 |
| #define IBT_REG_MODE_16BIT 0x01 |
| #define IBT_REG_MODE_32BIT 0x02 |
| |
| struct regmap_ibt_context { |
| struct hci_dev *hdev; |
| __u16 op_write; |
| __u16 op_read; |
| }; |
| |
| struct ibt_cp_reg_access { |
| __le32 addr; |
| __u8 mode; |
| __u8 len; |
| __u8 data[]; |
| } __packed; |
| |
| struct ibt_rp_reg_access { |
| __u8 status; |
| __le32 addr; |
| __u8 data[]; |
| } __packed; |
| |
| static int regmap_ibt_read(void *context, const void *addr, size_t reg_size, |
| void *val, size_t val_size) |
| { |
| struct regmap_ibt_context *ctx = context; |
| struct ibt_cp_reg_access cp; |
| struct ibt_rp_reg_access *rp; |
| struct sk_buff *skb; |
| int err = 0; |
| |
| if (reg_size != sizeof(__le32)) |
| return -EINVAL; |
| |
| switch (val_size) { |
| case 1: |
| cp.mode = IBT_REG_MODE_8BIT; |
| break; |
| case 2: |
| cp.mode = IBT_REG_MODE_16BIT; |
| break; |
| case 4: |
| cp.mode = IBT_REG_MODE_32BIT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* regmap provides a little-endian formatted addr */ |
| cp.addr = *(__le32 *)addr; |
| cp.len = val_size; |
| |
| bt_dev_dbg(ctx->hdev, "Register (0x%x) read", le32_to_cpu(cp.addr)); |
| |
| skb = hci_cmd_sync(ctx->hdev, ctx->op_read, sizeof(cp), &cp, |
| HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error (%d)", |
| le32_to_cpu(cp.addr), err); |
| return err; |
| } |
| |
| if (skb->len != sizeof(*rp) + val_size) { |
| bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad len", |
| le32_to_cpu(cp.addr)); |
| err = -EINVAL; |
| goto done; |
| } |
| |
| rp = (struct ibt_rp_reg_access *)skb->data; |
| |
| if (rp->addr != cp.addr) { |
| bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad addr", |
| le32_to_cpu(rp->addr)); |
| err = -EINVAL; |
| goto done; |
| } |
| |
| memcpy(val, rp->data, val_size); |
| |
| done: |
| kfree_skb(skb); |
| return err; |
| } |
| |
| static int regmap_ibt_gather_write(void *context, |
| const void *addr, size_t reg_size, |
| const void *val, size_t val_size) |
| { |
| struct regmap_ibt_context *ctx = context; |
| struct ibt_cp_reg_access *cp; |
| struct sk_buff *skb; |
| int plen = sizeof(*cp) + val_size; |
| u8 mode; |
| int err = 0; |
| |
| if (reg_size != sizeof(__le32)) |
| return -EINVAL; |
| |
| switch (val_size) { |
| case 1: |
| mode = IBT_REG_MODE_8BIT; |
| break; |
| case 2: |
| mode = IBT_REG_MODE_16BIT; |
| break; |
| case 4: |
| mode = IBT_REG_MODE_32BIT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| cp = kmalloc(plen, GFP_KERNEL); |
| if (!cp) |
| return -ENOMEM; |
| |
| /* regmap provides a little-endian formatted addr/value */ |
| cp->addr = *(__le32 *)addr; |
| cp->mode = mode; |
| cp->len = val_size; |
| memcpy(&cp->data, val, val_size); |
| |
| bt_dev_dbg(ctx->hdev, "Register (0x%x) write", le32_to_cpu(cp->addr)); |
| |
| skb = hci_cmd_sync(ctx->hdev, ctx->op_write, plen, cp, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(ctx->hdev, "regmap: Register (0x%x) write error (%d)", |
| le32_to_cpu(cp->addr), err); |
| goto done; |
| } |
| kfree_skb(skb); |
| |
| done: |
| kfree(cp); |
| return err; |
| } |
| |
| static int regmap_ibt_write(void *context, const void *data, size_t count) |
| { |
| /* data contains register+value, since we only support 32bit addr, |
| * minimum data size is 4 bytes. |
| */ |
| if (WARN_ONCE(count < 4, "Invalid register access")) |
| return -EINVAL; |
| |
| return regmap_ibt_gather_write(context, data, 4, data + 4, count - 4); |
| } |
| |
| static void regmap_ibt_free_context(void *context) |
| { |
| kfree(context); |
| } |
| |
| static struct regmap_bus regmap_ibt = { |
| .read = regmap_ibt_read, |
| .write = regmap_ibt_write, |
| .gather_write = regmap_ibt_gather_write, |
| .free_context = regmap_ibt_free_context, |
| .reg_format_endian_default = REGMAP_ENDIAN_LITTLE, |
| .val_format_endian_default = REGMAP_ENDIAN_LITTLE, |
| }; |
| |
| /* Config is the same for all register regions */ |
| static const struct regmap_config regmap_ibt_cfg = { |
| .name = "btintel_regmap", |
| .reg_bits = 32, |
| .val_bits = 32, |
| }; |
| |
| struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read, |
| u16 opcode_write) |
| { |
| struct regmap_ibt_context *ctx; |
| |
| bt_dev_info(hdev, "regmap: Init R%x-W%x region", opcode_read, |
| opcode_write); |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return ERR_PTR(-ENOMEM); |
| |
| ctx->op_read = opcode_read; |
| ctx->op_write = opcode_write; |
| ctx->hdev = hdev; |
| |
| return regmap_init(&hdev->dev, ®map_ibt, ctx, ®map_ibt_cfg); |
| } |
| EXPORT_SYMBOL_GPL(btintel_regmap_init); |
| |
| int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param) |
| { |
| struct intel_reset params = { 0x00, 0x01, 0x00, 0x01, 0x00000000 }; |
| struct sk_buff *skb; |
| |
| params.boot_param = cpu_to_le32(boot_param); |
| |
| skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), ¶ms, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Failed to send Intel Reset command"); |
| return PTR_ERR(skb); |
| } |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_send_intel_reset); |
| |
| int btintel_read_boot_params(struct hci_dev *hdev, |
| struct intel_boot_params *params) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| |
| if (skb->len != sizeof(*params)) { |
| bt_dev_err(hdev, "Intel boot parameters size mismatch"); |
| kfree_skb(skb); |
| return -EILSEQ; |
| } |
| |
| memcpy(params, skb->data, sizeof(*params)); |
| |
| kfree_skb(skb); |
| |
| if (params->status) { |
| bt_dev_err(hdev, "Intel boot parameters command failed (%02x)", |
| params->status); |
| return -bt_to_errno(params->status); |
| } |
| |
| bt_dev_info(hdev, "Device revision is %u", |
| le16_to_cpu(params->dev_revid)); |
| |
| bt_dev_info(hdev, "Secure boot is %s", |
| params->secure_boot ? "enabled" : "disabled"); |
| |
| bt_dev_info(hdev, "OTP lock is %s", |
| params->otp_lock ? "enabled" : "disabled"); |
| |
| bt_dev_info(hdev, "API lock is %s", |
| params->api_lock ? "enabled" : "disabled"); |
| |
| bt_dev_info(hdev, "Debug lock is %s", |
| params->debug_lock ? "enabled" : "disabled"); |
| |
| bt_dev_info(hdev, "Minimum firmware build %u week %u %u", |
| params->min_fw_build_nn, params->min_fw_build_cw, |
| 2000 + params->min_fw_build_yy); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_read_boot_params); |
| |
| static int btintel_sfi_rsa_header_secure_send(struct hci_dev *hdev, |
| const struct firmware *fw) |
| { |
| int err; |
| |
| /* Start the firmware download transaction with the Init fragment |
| * represented by the 128 bytes of CSS header. |
| */ |
| err = btintel_secure_send(hdev, 0x00, 128, fw->data); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send firmware header (%d)", err); |
| goto done; |
| } |
| |
| /* Send the 256 bytes of public key information from the firmware |
| * as the PKey fragment. |
| */ |
| err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err); |
| goto done; |
| } |
| |
| /* Send the 256 bytes of signature information from the firmware |
| * as the Sign fragment. |
| */ |
| err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send firmware signature (%d)", err); |
| goto done; |
| } |
| |
| done: |
| return err; |
| } |
| |
| static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev, |
| const struct firmware *fw) |
| { |
| int err; |
| |
| /* Start the firmware download transaction with the Init fragment |
| * represented by the 128 bytes of CSS header. |
| */ |
| err = btintel_secure_send(hdev, 0x00, 128, fw->data + 644); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send firmware header (%d)", err); |
| return err; |
| } |
| |
| /* Send the 96 bytes of public key information from the firmware |
| * as the PKey fragment. |
| */ |
| err = btintel_secure_send(hdev, 0x03, 96, fw->data + 644 + 128); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err); |
| return err; |
| } |
| |
| /* Send the 96 bytes of signature information from the firmware |
| * as the Sign fragment |
| */ |
| err = btintel_secure_send(hdev, 0x02, 96, fw->data + 644 + 224); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send firmware signature (%d)", |
| err); |
| return err; |
| } |
| return 0; |
| } |
| |
| static int btintel_download_firmware_payload(struct hci_dev *hdev, |
| const struct firmware *fw, |
| u32 *boot_param, size_t offset) |
| { |
| int err; |
| const u8 *fw_ptr; |
| u32 frag_len; |
| |
| fw_ptr = fw->data + offset; |
| frag_len = 0; |
| err = -EINVAL; |
| |
| while (fw_ptr - fw->data < fw->size) { |
| struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len); |
| |
| /* Each SKU has a different reset parameter to use in the |
| * HCI_Intel_Reset command and it is embedded in the firmware |
| * data. So, instead of using static value per SKU, check |
| * the firmware data and save it for later use. |
| */ |
| if (le16_to_cpu(cmd->opcode) == 0xfc0e) { |
| /* The boot parameter is the first 32-bit value |
| * and rest of 3 octets are reserved. |
| */ |
| *boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd)); |
| |
| bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param); |
| } |
| |
| frag_len += sizeof(*cmd) + cmd->plen; |
| |
| /* The parameter length of the secure send command requires |
| * a 4 byte alignment. It happens so that the firmware file |
| * contains proper Intel_NOP commands to align the fragments |
| * as needed. |
| * |
| * Send set of commands with 4 byte alignment from the |
| * firmware data buffer as a single Data fragement. |
| */ |
| if (!(frag_len % 4)) { |
| err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr); |
| if (err < 0) { |
| bt_dev_err(hdev, |
| "Failed to send firmware data (%d)", |
| err); |
| goto done; |
| } |
| |
| fw_ptr += frag_len; |
| frag_len = 0; |
| } |
| } |
| |
| done: |
| return err; |
| } |
| |
| int btintel_download_firmware(struct hci_dev *hdev, |
| const struct firmware *fw, |
| u32 *boot_param) |
| { |
| int err; |
| |
| err = btintel_sfi_rsa_header_secure_send(hdev, fw); |
| if (err) |
| return err; |
| |
| return btintel_download_firmware_payload(hdev, fw, boot_param, |
| RSA_HEADER_LEN); |
| } |
| EXPORT_SYMBOL_GPL(btintel_download_firmware); |
| |
| int btintel_download_firmware_newgen(struct hci_dev *hdev, |
| const struct firmware *fw, u32 *boot_param, |
| u8 hw_variant, u8 sbe_type) |
| { |
| int err; |
| u32 css_header_ver; |
| |
| /* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support |
| * only RSA secure boot engine. Hence, the corresponding sfi file will |
| * have RSA header of 644 bytes followed by Command Buffer. |
| * |
| * iBT hardware variants 0x17, 0x18 onwards support both RSA and ECDSA |
| * secure boot engine. As a result, the corresponding sfi file will |
| * have RSA header of 644, ECDSA header of 320 bytes followed by |
| * Command Buffer. |
| * |
| * CSS Header byte positions 0x08 to 0x0B represent the CSS Header |
| * version: RSA(0x00010000) , ECDSA (0x00020000) |
| */ |
| css_header_ver = get_unaligned_le32(fw->data + CSS_HEADER_OFFSET); |
| if (css_header_ver != 0x00010000) { |
| bt_dev_err(hdev, "Invalid CSS Header version"); |
| return -EINVAL; |
| } |
| |
| if (hw_variant <= 0x14) { |
| if (sbe_type != 0x00) { |
| bt_dev_err(hdev, "Invalid SBE type for hardware variant (%d)", |
| hw_variant); |
| return -EINVAL; |
| } |
| |
| err = btintel_sfi_rsa_header_secure_send(hdev, fw); |
| if (err) |
| return err; |
| |
| err = btintel_download_firmware_payload(hdev, fw, boot_param, RSA_HEADER_LEN); |
| if (err) |
| return err; |
| } else if (hw_variant >= 0x17) { |
| /* Check if CSS header for ECDSA follows the RSA header */ |
| if (fw->data[ECDSA_OFFSET] != 0x06) |
| return -EINVAL; |
| |
| /* Check if the CSS Header version is ECDSA(0x00020000) */ |
| css_header_ver = get_unaligned_le32(fw->data + ECDSA_OFFSET + CSS_HEADER_OFFSET); |
| if (css_header_ver != 0x00020000) { |
| bt_dev_err(hdev, "Invalid CSS Header version"); |
| return -EINVAL; |
| } |
| |
| if (sbe_type == 0x00) { |
| err = btintel_sfi_rsa_header_secure_send(hdev, fw); |
| if (err) |
| return err; |
| |
| err = btintel_download_firmware_payload(hdev, fw, |
| boot_param, |
| RSA_HEADER_LEN + ECDSA_HEADER_LEN); |
| if (err) |
| return err; |
| } else if (sbe_type == 0x01) { |
| err = btintel_sfi_ecdsa_header_secure_send(hdev, fw); |
| if (err) |
| return err; |
| |
| err = btintel_download_firmware_payload(hdev, fw, |
| boot_param, |
| RSA_HEADER_LEN + ECDSA_HEADER_LEN); |
| if (err) |
| return err; |
| } |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_download_firmware_newgen); |
| |
| void btintel_reset_to_bootloader(struct hci_dev *hdev) |
| { |
| struct intel_reset params; |
| struct sk_buff *skb; |
| |
| /* Send Intel Reset command. This will result in |
| * re-enumeration of BT controller. |
| * |
| * Intel Reset parameter description: |
| * reset_type : 0x00 (Soft reset), |
| * 0x01 (Hard reset) |
| * patch_enable : 0x00 (Do not enable), |
| * 0x01 (Enable) |
| * ddc_reload : 0x00 (Do not reload), |
| * 0x01 (Reload) |
| * boot_option: 0x00 (Current image), |
| * 0x01 (Specified boot address) |
| * boot_param: Boot address |
| * |
| */ |
| params.reset_type = 0x01; |
| params.patch_enable = 0x01; |
| params.ddc_reload = 0x01; |
| params.boot_option = 0x00; |
| params.boot_param = cpu_to_le32(0x00000000); |
| |
| skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), |
| ¶ms, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "FW download error recovery failed (%ld)", |
| PTR_ERR(skb)); |
| return; |
| } |
| bt_dev_info(hdev, "Intel reset sent to retry FW download"); |
| kfree_skb(skb); |
| |
| /* Current Intel BT controllers(ThP/JfP) hold the USB reset |
| * lines for 2ms when it receives Intel Reset in bootloader mode. |
| * Whereas, the upcoming Intel BT controllers will hold USB reset |
| * for 150ms. To keep the delay generic, 150ms is chosen here. |
| */ |
| msleep(150); |
| } |
| EXPORT_SYMBOL_GPL(btintel_reset_to_bootloader); |
| |
| int btintel_read_debug_features(struct hci_dev *hdev, |
| struct intel_debug_features *features) |
| { |
| struct sk_buff *skb; |
| u8 page_no = 1; |
| |
| /* Intel controller supports two pages, each page is of 128-bit |
| * feature bit mask. And each bit defines specific feature support |
| */ |
| skb = __hci_cmd_sync(hdev, 0xfca6, sizeof(page_no), &page_no, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Reading supported features failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| |
| if (skb->len != (sizeof(features->page1) + 3)) { |
| bt_dev_err(hdev, "Supported features event size mismatch"); |
| kfree_skb(skb); |
| return -EILSEQ; |
| } |
| |
| memcpy(features->page1, skb->data + 3, sizeof(features->page1)); |
| |
| /* Read the supported features page2 if required in future. |
| */ |
| kfree_skb(skb); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_read_debug_features); |
| |
| int btintel_set_debug_features(struct hci_dev *hdev, |
| const struct intel_debug_features *features) |
| { |
| u8 mask[11] = { 0x0a, 0x92, 0x02, 0x07, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00 }; |
| struct sk_buff *skb; |
| |
| if (!features) |
| return -EINVAL; |
| |
| if (!(features->page1[0] & 0x3f)) { |
| bt_dev_info(hdev, "Telemetry exception format not supported"); |
| return 0; |
| } |
| |
| skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| |
| kfree_skb(skb); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_debug_features); |
| |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); |
| MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE("intel/ibt-11-5.sfi"); |
| MODULE_FIRMWARE("intel/ibt-11-5.ddc"); |
| MODULE_FIRMWARE("intel/ibt-12-16.sfi"); |
| MODULE_FIRMWARE("intel/ibt-12-16.ddc"); |