| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Xilinx Spartan6 and 7 Series Slave Serial SPI Driver |
| * |
| * Copyright (C) 2017 DENX Software Engineering |
| * |
| * Anatolij Gustschin <agust@denx.de> |
| * |
| * Manage Xilinx FPGA firmware that is loaded over SPI using |
| * the slave serial configuration interface. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/fpga/fpga-mgr.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/of.h> |
| #include <linux/spi/spi.h> |
| #include <linux/sizes.h> |
| |
| struct xilinx_spi_conf { |
| struct spi_device *spi; |
| struct gpio_desc *prog_b; |
| struct gpio_desc *init_b; |
| struct gpio_desc *done; |
| }; |
| |
| static int get_done_gpio(struct fpga_manager *mgr) |
| { |
| struct xilinx_spi_conf *conf = mgr->priv; |
| int ret; |
| |
| ret = gpiod_get_value(conf->done); |
| |
| if (ret < 0) |
| dev_err(&mgr->dev, "Error reading DONE (%d)\n", ret); |
| |
| return ret; |
| } |
| |
| static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr) |
| { |
| if (!get_done_gpio(mgr)) |
| return FPGA_MGR_STATE_RESET; |
| |
| return FPGA_MGR_STATE_UNKNOWN; |
| } |
| |
| /** |
| * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait |
| * a given delay if the pin is unavailable |
| * |
| * @mgr: The FPGA manager object |
| * @value: Value INIT_B to wait for (1 = asserted = low) |
| * @alt_udelay: Delay to wait if the INIT_B GPIO is not available |
| * |
| * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if |
| * too much time passed waiting for that. If no INIT_B GPIO is available |
| * then always return 0. |
| */ |
| static int wait_for_init_b(struct fpga_manager *mgr, int value, |
| unsigned long alt_udelay) |
| { |
| struct xilinx_spi_conf *conf = mgr->priv; |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); |
| |
| if (conf->init_b) { |
| while (time_before(jiffies, timeout)) { |
| int ret = gpiod_get_value(conf->init_b); |
| |
| if (ret == value) |
| return 0; |
| |
| if (ret < 0) { |
| dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret); |
| return ret; |
| } |
| |
| usleep_range(100, 400); |
| } |
| |
| dev_err(&mgr->dev, "Timeout waiting for INIT_B to %s\n", |
| value ? "assert" : "deassert"); |
| return -ETIMEDOUT; |
| } |
| |
| udelay(alt_udelay); |
| |
| return 0; |
| } |
| |
| static int xilinx_spi_write_init(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| const char *buf, size_t count) |
| { |
| struct xilinx_spi_conf *conf = mgr->priv; |
| int err; |
| |
| if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { |
| dev_err(&mgr->dev, "Partial reconfiguration not supported\n"); |
| return -EINVAL; |
| } |
| |
| gpiod_set_value(conf->prog_b, 1); |
| |
| err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */ |
| if (err) { |
| gpiod_set_value(conf->prog_b, 0); |
| return err; |
| } |
| |
| gpiod_set_value(conf->prog_b, 0); |
| |
| err = wait_for_init_b(mgr, 0, 0); |
| if (err) |
| return err; |
| |
| if (get_done_gpio(mgr)) { |
| dev_err(&mgr->dev, "Unexpected DONE pin state...\n"); |
| return -EIO; |
| } |
| |
| /* program latency */ |
| usleep_range(7500, 7600); |
| return 0; |
| } |
| |
| static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf, |
| size_t count) |
| { |
| struct xilinx_spi_conf *conf = mgr->priv; |
| const char *fw_data = buf; |
| const char *fw_data_end = fw_data + count; |
| |
| while (fw_data < fw_data_end) { |
| size_t remaining, stride; |
| int ret; |
| |
| remaining = fw_data_end - fw_data; |
| stride = min_t(size_t, remaining, SZ_4K); |
| |
| ret = spi_write(conf->spi, fw_data, stride); |
| if (ret) { |
| dev_err(&mgr->dev, "SPI error in firmware write: %d\n", |
| ret); |
| return ret; |
| } |
| fw_data += stride; |
| } |
| |
| return 0; |
| } |
| |
| static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf) |
| { |
| struct spi_device *spi = conf->spi; |
| const u8 din_data[1] = { 0xff }; |
| int ret; |
| |
| ret = spi_write(conf->spi, din_data, sizeof(din_data)); |
| if (ret) |
| dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int xilinx_spi_write_complete(struct fpga_manager *mgr, |
| struct fpga_image_info *info) |
| { |
| struct xilinx_spi_conf *conf = mgr->priv; |
| unsigned long timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us); |
| bool expired = false; |
| int done; |
| int ret; |
| |
| /* |
| * This loop is carefully written such that if the driver is |
| * scheduled out for more than 'timeout', we still check for DONE |
| * before giving up and we apply 8 extra CCLK cycles in all cases. |
| */ |
| while (!expired) { |
| expired = time_after(jiffies, timeout); |
| |
| done = get_done_gpio(mgr); |
| if (done < 0) |
| return done; |
| |
| ret = xilinx_spi_apply_cclk_cycles(conf); |
| if (ret) |
| return ret; |
| |
| if (done) |
| return 0; |
| } |
| |
| if (conf->init_b) { |
| ret = gpiod_get_value(conf->init_b); |
| |
| if (ret < 0) { |
| dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret); |
| return ret; |
| } |
| |
| dev_err(&mgr->dev, |
| ret ? "CRC error or invalid device\n" |
| : "Missing sync word or incomplete bitstream\n"); |
| } else { |
| dev_err(&mgr->dev, "Timeout after config data transfer\n"); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static const struct fpga_manager_ops xilinx_spi_ops = { |
| .state = xilinx_spi_state, |
| .write_init = xilinx_spi_write_init, |
| .write = xilinx_spi_write, |
| .write_complete = xilinx_spi_write_complete, |
| }; |
| |
| static int xilinx_spi_probe(struct spi_device *spi) |
| { |
| struct xilinx_spi_conf *conf; |
| struct fpga_manager *mgr; |
| |
| conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL); |
| if (!conf) |
| return -ENOMEM; |
| |
| conf->spi = spi; |
| |
| /* PROGRAM_B is active low */ |
| conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW); |
| if (IS_ERR(conf->prog_b)) { |
| dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n", |
| PTR_ERR(conf->prog_b)); |
| return PTR_ERR(conf->prog_b); |
| } |
| |
| conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN); |
| if (IS_ERR(conf->init_b)) { |
| dev_err(&spi->dev, "Failed to get INIT_B gpio: %ld\n", |
| PTR_ERR(conf->init_b)); |
| return PTR_ERR(conf->init_b); |
| } |
| |
| conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN); |
| if (IS_ERR(conf->done)) { |
| dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n", |
| PTR_ERR(conf->done)); |
| return PTR_ERR(conf->done); |
| } |
| |
| mgr = devm_fpga_mgr_create(&spi->dev, |
| "Xilinx Slave Serial FPGA Manager", |
| &xilinx_spi_ops, conf); |
| if (!mgr) |
| return -ENOMEM; |
| |
| return devm_fpga_mgr_register(&spi->dev, mgr); |
| } |
| |
| static const struct of_device_id xlnx_spi_of_match[] = { |
| { .compatible = "xlnx,fpga-slave-serial", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, xlnx_spi_of_match); |
| |
| static struct spi_driver xilinx_slave_spi_driver = { |
| .driver = { |
| .name = "xlnx-slave-spi", |
| .of_match_table = of_match_ptr(xlnx_spi_of_match), |
| }, |
| .probe = xilinx_spi_probe, |
| }; |
| |
| module_spi_driver(xilinx_slave_spi_driver) |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); |
| MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI"); |