| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * sufile.c - NILFS segment usage file. |
| * |
| * Copyright (C) 2006-2008 Nippon Telegraph and Telephone Corporation. |
| * |
| * Written by Koji Sato. |
| * Revised by Ryusuke Konishi. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/string.h> |
| #include <linux/buffer_head.h> |
| #include <linux/errno.h> |
| #include "mdt.h" |
| #include "sufile.h" |
| |
| #include <trace/events/nilfs2.h> |
| |
| /** |
| * struct nilfs_sufile_info - on-memory private data of sufile |
| * @mi: on-memory private data of metadata file |
| * @ncleansegs: number of clean segments |
| * @allocmin: lower limit of allocatable segment range |
| * @allocmax: upper limit of allocatable segment range |
| */ |
| struct nilfs_sufile_info { |
| struct nilfs_mdt_info mi; |
| unsigned long ncleansegs;/* number of clean segments */ |
| __u64 allocmin; /* lower limit of allocatable segment range */ |
| __u64 allocmax; /* upper limit of allocatable segment range */ |
| }; |
| |
| static inline struct nilfs_sufile_info *NILFS_SUI(struct inode *sufile) |
| { |
| return (struct nilfs_sufile_info *)NILFS_MDT(sufile); |
| } |
| |
| static inline unsigned long |
| nilfs_sufile_segment_usages_per_block(const struct inode *sufile) |
| { |
| return NILFS_MDT(sufile)->mi_entries_per_block; |
| } |
| |
| static unsigned long |
| nilfs_sufile_get_blkoff(const struct inode *sufile, __u64 segnum) |
| { |
| __u64 t = segnum + NILFS_MDT(sufile)->mi_first_entry_offset; |
| |
| do_div(t, nilfs_sufile_segment_usages_per_block(sufile)); |
| return (unsigned long)t; |
| } |
| |
| static unsigned long |
| nilfs_sufile_get_offset(const struct inode *sufile, __u64 segnum) |
| { |
| __u64 t = segnum + NILFS_MDT(sufile)->mi_first_entry_offset; |
| |
| return do_div(t, nilfs_sufile_segment_usages_per_block(sufile)); |
| } |
| |
| static unsigned long |
| nilfs_sufile_segment_usages_in_block(const struct inode *sufile, __u64 curr, |
| __u64 max) |
| { |
| return min_t(unsigned long, |
| nilfs_sufile_segment_usages_per_block(sufile) - |
| nilfs_sufile_get_offset(sufile, curr), |
| max - curr + 1); |
| } |
| |
| static struct nilfs_segment_usage * |
| nilfs_sufile_block_get_segment_usage(const struct inode *sufile, __u64 segnum, |
| struct buffer_head *bh, void *kaddr) |
| { |
| return kaddr + bh_offset(bh) + |
| nilfs_sufile_get_offset(sufile, segnum) * |
| NILFS_MDT(sufile)->mi_entry_size; |
| } |
| |
| static inline int nilfs_sufile_get_header_block(struct inode *sufile, |
| struct buffer_head **bhp) |
| { |
| return nilfs_mdt_get_block(sufile, 0, 0, NULL, bhp); |
| } |
| |
| static inline int |
| nilfs_sufile_get_segment_usage_block(struct inode *sufile, __u64 segnum, |
| int create, struct buffer_head **bhp) |
| { |
| return nilfs_mdt_get_block(sufile, |
| nilfs_sufile_get_blkoff(sufile, segnum), |
| create, NULL, bhp); |
| } |
| |
| static int nilfs_sufile_delete_segment_usage_block(struct inode *sufile, |
| __u64 segnum) |
| { |
| return nilfs_mdt_delete_block(sufile, |
| nilfs_sufile_get_blkoff(sufile, segnum)); |
| } |
| |
| static void nilfs_sufile_mod_counter(struct buffer_head *header_bh, |
| u64 ncleanadd, u64 ndirtyadd) |
| { |
| struct nilfs_sufile_header *header; |
| void *kaddr; |
| |
| kaddr = kmap_atomic(header_bh->b_page); |
| header = kaddr + bh_offset(header_bh); |
| le64_add_cpu(&header->sh_ncleansegs, ncleanadd); |
| le64_add_cpu(&header->sh_ndirtysegs, ndirtyadd); |
| kunmap_atomic(kaddr); |
| |
| mark_buffer_dirty(header_bh); |
| } |
| |
| /** |
| * nilfs_sufile_get_ncleansegs - return the number of clean segments |
| * @sufile: inode of segment usage file |
| */ |
| unsigned long nilfs_sufile_get_ncleansegs(struct inode *sufile) |
| { |
| return NILFS_SUI(sufile)->ncleansegs; |
| } |
| |
| /** |
| * nilfs_sufile_updatev - modify multiple segment usages at a time |
| * @sufile: inode of segment usage file |
| * @segnumv: array of segment numbers |
| * @nsegs: size of @segnumv array |
| * @create: creation flag |
| * @ndone: place to store number of modified segments on @segnumv |
| * @dofunc: primitive operation for the update |
| * |
| * Description: nilfs_sufile_updatev() repeatedly calls @dofunc |
| * against the given array of segments. The @dofunc is called with |
| * buffers of a header block and the sufile block in which the target |
| * segment usage entry is contained. If @ndone is given, the number |
| * of successfully modified segments from the head is stored in the |
| * place @ndone points to. |
| * |
| * Return Value: On success, zero is returned. On error, one of the |
| * following negative error codes is returned. |
| * |
| * %-EIO - I/O error. |
| * |
| * %-ENOMEM - Insufficient amount of memory available. |
| * |
| * %-ENOENT - Given segment usage is in hole block (may be returned if |
| * @create is zero) |
| * |
| * %-EINVAL - Invalid segment usage number |
| */ |
| int nilfs_sufile_updatev(struct inode *sufile, __u64 *segnumv, size_t nsegs, |
| int create, size_t *ndone, |
| void (*dofunc)(struct inode *, __u64, |
| struct buffer_head *, |
| struct buffer_head *)) |
| { |
| struct buffer_head *header_bh, *bh; |
| unsigned long blkoff, prev_blkoff; |
| __u64 *seg; |
| size_t nerr = 0, n = 0; |
| int ret = 0; |
| |
| if (unlikely(nsegs == 0)) |
| goto out; |
| |
| down_write(&NILFS_MDT(sufile)->mi_sem); |
| for (seg = segnumv; seg < segnumv + nsegs; seg++) { |
| if (unlikely(*seg >= nilfs_sufile_get_nsegments(sufile))) { |
| nilfs_warn(sufile->i_sb, |
| "%s: invalid segment number: %llu", |
| __func__, (unsigned long long)*seg); |
| nerr++; |
| } |
| } |
| if (nerr > 0) { |
| ret = -EINVAL; |
| goto out_sem; |
| } |
| |
| ret = nilfs_sufile_get_header_block(sufile, &header_bh); |
| if (ret < 0) |
| goto out_sem; |
| |
| seg = segnumv; |
| blkoff = nilfs_sufile_get_blkoff(sufile, *seg); |
| ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh); |
| if (ret < 0) |
| goto out_header; |
| |
| for (;;) { |
| dofunc(sufile, *seg, header_bh, bh); |
| |
| if (++seg >= segnumv + nsegs) |
| break; |
| prev_blkoff = blkoff; |
| blkoff = nilfs_sufile_get_blkoff(sufile, *seg); |
| if (blkoff == prev_blkoff) |
| continue; |
| |
| /* get different block */ |
| brelse(bh); |
| ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh); |
| if (unlikely(ret < 0)) |
| goto out_header; |
| } |
| brelse(bh); |
| |
| out_header: |
| n = seg - segnumv; |
| brelse(header_bh); |
| out_sem: |
| up_write(&NILFS_MDT(sufile)->mi_sem); |
| out: |
| if (ndone) |
| *ndone = n; |
| return ret; |
| } |
| |
| int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create, |
| void (*dofunc)(struct inode *, __u64, |
| struct buffer_head *, |
| struct buffer_head *)) |
| { |
| struct buffer_head *header_bh, *bh; |
| int ret; |
| |
| if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) { |
| nilfs_warn(sufile->i_sb, "%s: invalid segment number: %llu", |
| __func__, (unsigned long long)segnum); |
| return -EINVAL; |
| } |
| down_write(&NILFS_MDT(sufile)->mi_sem); |
| |
| ret = nilfs_sufile_get_header_block(sufile, &header_bh); |
| if (ret < 0) |
| goto out_sem; |
| |
| ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, create, &bh); |
| if (!ret) { |
| dofunc(sufile, segnum, header_bh, bh); |
| brelse(bh); |
| } |
| brelse(header_bh); |
| |
| out_sem: |
| up_write(&NILFS_MDT(sufile)->mi_sem); |
| return ret; |
| } |
| |
| /** |
| * nilfs_sufile_set_alloc_range - limit range of segment to be allocated |
| * @sufile: inode of segment usage file |
| * @start: minimum segment number of allocatable region (inclusive) |
| * @end: maximum segment number of allocatable region (inclusive) |
| * |
| * Return Value: On success, 0 is returned. On error, one of the |
| * following negative error codes is returned. |
| * |
| * %-ERANGE - invalid segment region |
| */ |
| int nilfs_sufile_set_alloc_range(struct inode *sufile, __u64 start, __u64 end) |
| { |
| struct nilfs_sufile_info *sui = NILFS_SUI(sufile); |
| __u64 nsegs; |
| int ret = -ERANGE; |
| |
| down_write(&NILFS_MDT(sufile)->mi_sem); |
| nsegs = nilfs_sufile_get_nsegments(sufile); |
| |
| if (start <= end && end < nsegs) { |
| sui->allocmin = start; |
| sui->allocmax = end; |
| ret = 0; |
| } |
| up_write(&NILFS_MDT(sufile)->mi_sem); |
| return ret; |
| } |
| |
| /** |
| * nilfs_sufile_alloc - allocate a segment |
| * @sufile: inode of segment usage file |
| * @segnump: pointer to segment number |
| * |
| * Description: nilfs_sufile_alloc() allocates a clean segment. |
| * |
| * Return Value: On success, 0 is returned and the segment number of the |
| * allocated segment is stored in the place pointed by @segnump. On error, one |
| * of the following negative error codes is returned. |
| * |
| * %-EIO - I/O error. |
| * |
| * %-ENOMEM - Insufficient amount of memory available. |
| * |
| * %-ENOSPC - No clean segment left. |
| */ |
| int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump) |
| { |
| struct buffer_head *header_bh, *su_bh; |
| struct nilfs_sufile_header *header; |
| struct nilfs_segment_usage *su; |
| struct nilfs_sufile_info *sui = NILFS_SUI(sufile); |
| size_t susz = NILFS_MDT(sufile)->mi_entry_size; |
| __u64 segnum, maxsegnum, last_alloc; |
| void *kaddr; |
| unsigned long nsegments, nsus, cnt; |
| int ret, j; |
| |
| down_write(&NILFS_MDT(sufile)->mi_sem); |
| |
| ret = nilfs_sufile_get_header_block(sufile, &header_bh); |
| if (ret < 0) |
| goto out_sem; |
| kaddr = kmap_atomic(header_bh->b_page); |
| header = kaddr + bh_offset(header_bh); |
| last_alloc = le64_to_cpu(header->sh_last_alloc); |
| kunmap_atomic(kaddr); |
| |
| nsegments = nilfs_sufile_get_nsegments(sufile); |
| maxsegnum = sui->allocmax; |
| segnum = last_alloc + 1; |
| if (segnum < sui->allocmin || segnum > sui->allocmax) |
| segnum = sui->allocmin; |
| |
| for (cnt = 0; cnt < nsegments; cnt += nsus) { |
| if (segnum > maxsegnum) { |
| if (cnt < sui->allocmax - sui->allocmin + 1) { |
| /* |
| * wrap around in the limited region. |
| * if allocation started from |
| * sui->allocmin, this never happens. |
| */ |
| segnum = sui->allocmin; |
| maxsegnum = last_alloc; |
| } else if (segnum > sui->allocmin && |
| sui->allocmax + 1 < nsegments) { |
| segnum = sui->allocmax + 1; |
| maxsegnum = nsegments - 1; |
| } else if (sui->allocmin > 0) { |
| segnum = 0; |
| maxsegnum = sui->allocmin - 1; |
| } else { |
| break; /* never happens */ |
| } |
| } |
| trace_nilfs2_segment_usage_check(sufile, segnum, cnt); |
| ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 1, |
| &su_bh); |
| if (ret < 0) |
| goto out_header; |
| kaddr = kmap_atomic(su_bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage( |
| sufile, segnum, su_bh, kaddr); |
| |
| nsus = nilfs_sufile_segment_usages_in_block( |
| sufile, segnum, maxsegnum); |
| for (j = 0; j < nsus; j++, su = (void *)su + susz, segnum++) { |
| if (!nilfs_segment_usage_clean(su)) |
| continue; |
| /* found a clean segment */ |
| nilfs_segment_usage_set_dirty(su); |
| kunmap_atomic(kaddr); |
| |
| kaddr = kmap_atomic(header_bh->b_page); |
| header = kaddr + bh_offset(header_bh); |
| le64_add_cpu(&header->sh_ncleansegs, -1); |
| le64_add_cpu(&header->sh_ndirtysegs, 1); |
| header->sh_last_alloc = cpu_to_le64(segnum); |
| kunmap_atomic(kaddr); |
| |
| sui->ncleansegs--; |
| mark_buffer_dirty(header_bh); |
| mark_buffer_dirty(su_bh); |
| nilfs_mdt_mark_dirty(sufile); |
| brelse(su_bh); |
| *segnump = segnum; |
| |
| trace_nilfs2_segment_usage_allocated(sufile, segnum); |
| |
| goto out_header; |
| } |
| |
| kunmap_atomic(kaddr); |
| brelse(su_bh); |
| } |
| |
| /* no segments left */ |
| ret = -ENOSPC; |
| |
| out_header: |
| brelse(header_bh); |
| |
| out_sem: |
| up_write(&NILFS_MDT(sufile)->mi_sem); |
| return ret; |
| } |
| |
| void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum, |
| struct buffer_head *header_bh, |
| struct buffer_head *su_bh) |
| { |
| struct nilfs_segment_usage *su; |
| void *kaddr; |
| |
| kaddr = kmap_atomic(su_bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr); |
| if (unlikely(!nilfs_segment_usage_clean(su))) { |
| nilfs_warn(sufile->i_sb, "%s: segment %llu must be clean", |
| __func__, (unsigned long long)segnum); |
| kunmap_atomic(kaddr); |
| return; |
| } |
| nilfs_segment_usage_set_dirty(su); |
| kunmap_atomic(kaddr); |
| |
| nilfs_sufile_mod_counter(header_bh, -1, 1); |
| NILFS_SUI(sufile)->ncleansegs--; |
| |
| mark_buffer_dirty(su_bh); |
| nilfs_mdt_mark_dirty(sufile); |
| } |
| |
| void nilfs_sufile_do_scrap(struct inode *sufile, __u64 segnum, |
| struct buffer_head *header_bh, |
| struct buffer_head *su_bh) |
| { |
| struct nilfs_segment_usage *su; |
| void *kaddr; |
| int clean, dirty; |
| |
| kaddr = kmap_atomic(su_bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr); |
| if (su->su_flags == cpu_to_le32(BIT(NILFS_SEGMENT_USAGE_DIRTY)) && |
| su->su_nblocks == cpu_to_le32(0)) { |
| kunmap_atomic(kaddr); |
| return; |
| } |
| clean = nilfs_segment_usage_clean(su); |
| dirty = nilfs_segment_usage_dirty(su); |
| |
| /* make the segment garbage */ |
| su->su_lastmod = cpu_to_le64(0); |
| su->su_nblocks = cpu_to_le32(0); |
| su->su_flags = cpu_to_le32(BIT(NILFS_SEGMENT_USAGE_DIRTY)); |
| kunmap_atomic(kaddr); |
| |
| nilfs_sufile_mod_counter(header_bh, clean ? (u64)-1 : 0, dirty ? 0 : 1); |
| NILFS_SUI(sufile)->ncleansegs -= clean; |
| |
| mark_buffer_dirty(su_bh); |
| nilfs_mdt_mark_dirty(sufile); |
| } |
| |
| void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum, |
| struct buffer_head *header_bh, |
| struct buffer_head *su_bh) |
| { |
| struct nilfs_segment_usage *su; |
| void *kaddr; |
| int sudirty; |
| |
| kaddr = kmap_atomic(su_bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr); |
| if (nilfs_segment_usage_clean(su)) { |
| nilfs_warn(sufile->i_sb, "%s: segment %llu is already clean", |
| __func__, (unsigned long long)segnum); |
| kunmap_atomic(kaddr); |
| return; |
| } |
| WARN_ON(nilfs_segment_usage_error(su)); |
| WARN_ON(!nilfs_segment_usage_dirty(su)); |
| |
| sudirty = nilfs_segment_usage_dirty(su); |
| nilfs_segment_usage_set_clean(su); |
| kunmap_atomic(kaddr); |
| mark_buffer_dirty(su_bh); |
| |
| nilfs_sufile_mod_counter(header_bh, 1, sudirty ? (u64)-1 : 0); |
| NILFS_SUI(sufile)->ncleansegs++; |
| |
| nilfs_mdt_mark_dirty(sufile); |
| |
| trace_nilfs2_segment_usage_freed(sufile, segnum); |
| } |
| |
| /** |
| * nilfs_sufile_mark_dirty - mark the buffer having a segment usage dirty |
| * @sufile: inode of segment usage file |
| * @segnum: segment number |
| */ |
| int nilfs_sufile_mark_dirty(struct inode *sufile, __u64 segnum) |
| { |
| struct buffer_head *bh; |
| int ret; |
| |
| ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &bh); |
| if (!ret) { |
| mark_buffer_dirty(bh); |
| nilfs_mdt_mark_dirty(sufile); |
| brelse(bh); |
| } |
| return ret; |
| } |
| |
| /** |
| * nilfs_sufile_set_segment_usage - set usage of a segment |
| * @sufile: inode of segment usage file |
| * @segnum: segment number |
| * @nblocks: number of live blocks in the segment |
| * @modtime: modification time (option) |
| */ |
| int nilfs_sufile_set_segment_usage(struct inode *sufile, __u64 segnum, |
| unsigned long nblocks, time64_t modtime) |
| { |
| struct buffer_head *bh; |
| struct nilfs_segment_usage *su; |
| void *kaddr; |
| int ret; |
| |
| down_write(&NILFS_MDT(sufile)->mi_sem); |
| ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &bh); |
| if (ret < 0) |
| goto out_sem; |
| |
| kaddr = kmap_atomic(bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr); |
| WARN_ON(nilfs_segment_usage_error(su)); |
| if (modtime) |
| su->su_lastmod = cpu_to_le64(modtime); |
| su->su_nblocks = cpu_to_le32(nblocks); |
| kunmap_atomic(kaddr); |
| |
| mark_buffer_dirty(bh); |
| nilfs_mdt_mark_dirty(sufile); |
| brelse(bh); |
| |
| out_sem: |
| up_write(&NILFS_MDT(sufile)->mi_sem); |
| return ret; |
| } |
| |
| /** |
| * nilfs_sufile_get_stat - get segment usage statistics |
| * @sufile: inode of segment usage file |
| * @sustat: pointer to a structure of segment usage statistics |
| * |
| * Description: nilfs_sufile_get_stat() returns information about segment |
| * usage. |
| * |
| * Return Value: On success, 0 is returned, and segment usage information is |
| * stored in the place pointed by @sustat. On error, one of the following |
| * negative error codes is returned. |
| * |
| * %-EIO - I/O error. |
| * |
| * %-ENOMEM - Insufficient amount of memory available. |
| */ |
| int nilfs_sufile_get_stat(struct inode *sufile, struct nilfs_sustat *sustat) |
| { |
| struct buffer_head *header_bh; |
| struct nilfs_sufile_header *header; |
| struct the_nilfs *nilfs = sufile->i_sb->s_fs_info; |
| void *kaddr; |
| int ret; |
| |
| down_read(&NILFS_MDT(sufile)->mi_sem); |
| |
| ret = nilfs_sufile_get_header_block(sufile, &header_bh); |
| if (ret < 0) |
| goto out_sem; |
| |
| kaddr = kmap_atomic(header_bh->b_page); |
| header = kaddr + bh_offset(header_bh); |
| sustat->ss_nsegs = nilfs_sufile_get_nsegments(sufile); |
| sustat->ss_ncleansegs = le64_to_cpu(header->sh_ncleansegs); |
| sustat->ss_ndirtysegs = le64_to_cpu(header->sh_ndirtysegs); |
| sustat->ss_ctime = nilfs->ns_ctime; |
| sustat->ss_nongc_ctime = nilfs->ns_nongc_ctime; |
| spin_lock(&nilfs->ns_last_segment_lock); |
| sustat->ss_prot_seq = nilfs->ns_prot_seq; |
| spin_unlock(&nilfs->ns_last_segment_lock); |
| kunmap_atomic(kaddr); |
| brelse(header_bh); |
| |
| out_sem: |
| up_read(&NILFS_MDT(sufile)->mi_sem); |
| return ret; |
| } |
| |
| void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum, |
| struct buffer_head *header_bh, |
| struct buffer_head *su_bh) |
| { |
| struct nilfs_segment_usage *su; |
| void *kaddr; |
| int suclean; |
| |
| kaddr = kmap_atomic(su_bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr); |
| if (nilfs_segment_usage_error(su)) { |
| kunmap_atomic(kaddr); |
| return; |
| } |
| suclean = nilfs_segment_usage_clean(su); |
| nilfs_segment_usage_set_error(su); |
| kunmap_atomic(kaddr); |
| |
| if (suclean) { |
| nilfs_sufile_mod_counter(header_bh, -1, 0); |
| NILFS_SUI(sufile)->ncleansegs--; |
| } |
| mark_buffer_dirty(su_bh); |
| nilfs_mdt_mark_dirty(sufile); |
| } |
| |
| /** |
| * nilfs_sufile_truncate_range - truncate range of segment array |
| * @sufile: inode of segment usage file |
| * @start: start segment number (inclusive) |
| * @end: end segment number (inclusive) |
| * |
| * Return Value: On success, 0 is returned. On error, one of the |
| * following negative error codes is returned. |
| * |
| * %-EIO - I/O error. |
| * |
| * %-ENOMEM - Insufficient amount of memory available. |
| * |
| * %-EINVAL - Invalid number of segments specified |
| * |
| * %-EBUSY - Dirty or active segments are present in the range |
| */ |
| static int nilfs_sufile_truncate_range(struct inode *sufile, |
| __u64 start, __u64 end) |
| { |
| struct the_nilfs *nilfs = sufile->i_sb->s_fs_info; |
| struct buffer_head *header_bh; |
| struct buffer_head *su_bh; |
| struct nilfs_segment_usage *su, *su2; |
| size_t susz = NILFS_MDT(sufile)->mi_entry_size; |
| unsigned long segusages_per_block; |
| unsigned long nsegs, ncleaned; |
| __u64 segnum; |
| void *kaddr; |
| ssize_t n, nc; |
| int ret; |
| int j; |
| |
| nsegs = nilfs_sufile_get_nsegments(sufile); |
| |
| ret = -EINVAL; |
| if (start > end || start >= nsegs) |
| goto out; |
| |
| ret = nilfs_sufile_get_header_block(sufile, &header_bh); |
| if (ret < 0) |
| goto out; |
| |
| segusages_per_block = nilfs_sufile_segment_usages_per_block(sufile); |
| ncleaned = 0; |
| |
| for (segnum = start; segnum <= end; segnum += n) { |
| n = min_t(unsigned long, |
| segusages_per_block - |
| nilfs_sufile_get_offset(sufile, segnum), |
| end - segnum + 1); |
| ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, |
| &su_bh); |
| if (ret < 0) { |
| if (ret != -ENOENT) |
| goto out_header; |
| /* hole */ |
| continue; |
| } |
| kaddr = kmap_atomic(su_bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage( |
| sufile, segnum, su_bh, kaddr); |
| su2 = su; |
| for (j = 0; j < n; j++, su = (void *)su + susz) { |
| if ((le32_to_cpu(su->su_flags) & |
| ~BIT(NILFS_SEGMENT_USAGE_ERROR)) || |
| nilfs_segment_is_active(nilfs, segnum + j)) { |
| ret = -EBUSY; |
| kunmap_atomic(kaddr); |
| brelse(su_bh); |
| goto out_header; |
| } |
| } |
| nc = 0; |
| for (su = su2, j = 0; j < n; j++, su = (void *)su + susz) { |
| if (nilfs_segment_usage_error(su)) { |
| nilfs_segment_usage_set_clean(su); |
| nc++; |
| } |
| } |
| kunmap_atomic(kaddr); |
| if (nc > 0) { |
| mark_buffer_dirty(su_bh); |
| ncleaned += nc; |
| } |
| brelse(su_bh); |
| |
| if (n == segusages_per_block) { |
| /* make hole */ |
| nilfs_sufile_delete_segment_usage_block(sufile, segnum); |
| } |
| } |
| ret = 0; |
| |
| out_header: |
| if (ncleaned > 0) { |
| NILFS_SUI(sufile)->ncleansegs += ncleaned; |
| nilfs_sufile_mod_counter(header_bh, ncleaned, 0); |
| nilfs_mdt_mark_dirty(sufile); |
| } |
| brelse(header_bh); |
| out: |
| return ret; |
| } |
| |
| /** |
| * nilfs_sufile_resize - resize segment array |
| * @sufile: inode of segment usage file |
| * @newnsegs: new number of segments |
| * |
| * Return Value: On success, 0 is returned. On error, one of the |
| * following negative error codes is returned. |
| * |
| * %-EIO - I/O error. |
| * |
| * %-ENOMEM - Insufficient amount of memory available. |
| * |
| * %-ENOSPC - Enough free space is not left for shrinking |
| * |
| * %-EBUSY - Dirty or active segments exist in the region to be truncated |
| */ |
| int nilfs_sufile_resize(struct inode *sufile, __u64 newnsegs) |
| { |
| struct the_nilfs *nilfs = sufile->i_sb->s_fs_info; |
| struct buffer_head *header_bh; |
| struct nilfs_sufile_header *header; |
| struct nilfs_sufile_info *sui = NILFS_SUI(sufile); |
| void *kaddr; |
| unsigned long nsegs, nrsvsegs; |
| int ret = 0; |
| |
| down_write(&NILFS_MDT(sufile)->mi_sem); |
| |
| nsegs = nilfs_sufile_get_nsegments(sufile); |
| if (nsegs == newnsegs) |
| goto out; |
| |
| ret = -ENOSPC; |
| nrsvsegs = nilfs_nrsvsegs(nilfs, newnsegs); |
| if (newnsegs < nsegs && nsegs - newnsegs + nrsvsegs > sui->ncleansegs) |
| goto out; |
| |
| ret = nilfs_sufile_get_header_block(sufile, &header_bh); |
| if (ret < 0) |
| goto out; |
| |
| if (newnsegs > nsegs) { |
| sui->ncleansegs += newnsegs - nsegs; |
| } else /* newnsegs < nsegs */ { |
| ret = nilfs_sufile_truncate_range(sufile, newnsegs, nsegs - 1); |
| if (ret < 0) |
| goto out_header; |
| |
| sui->ncleansegs -= nsegs - newnsegs; |
| } |
| |
| kaddr = kmap_atomic(header_bh->b_page); |
| header = kaddr + bh_offset(header_bh); |
| header->sh_ncleansegs = cpu_to_le64(sui->ncleansegs); |
| kunmap_atomic(kaddr); |
| |
| mark_buffer_dirty(header_bh); |
| nilfs_mdt_mark_dirty(sufile); |
| nilfs_set_nsegments(nilfs, newnsegs); |
| |
| out_header: |
| brelse(header_bh); |
| out: |
| up_write(&NILFS_MDT(sufile)->mi_sem); |
| return ret; |
| } |
| |
| /** |
| * nilfs_sufile_get_suinfo - |
| * @sufile: inode of segment usage file |
| * @segnum: segment number to start looking |
| * @buf: array of suinfo |
| * @sisz: byte size of suinfo |
| * @nsi: size of suinfo array |
| * |
| * Description: |
| * |
| * Return Value: On success, 0 is returned and .... On error, one of the |
| * following negative error codes is returned. |
| * |
| * %-EIO - I/O error. |
| * |
| * %-ENOMEM - Insufficient amount of memory available. |
| */ |
| ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum, void *buf, |
| unsigned int sisz, size_t nsi) |
| { |
| struct buffer_head *su_bh; |
| struct nilfs_segment_usage *su; |
| struct nilfs_suinfo *si = buf; |
| size_t susz = NILFS_MDT(sufile)->mi_entry_size; |
| struct the_nilfs *nilfs = sufile->i_sb->s_fs_info; |
| void *kaddr; |
| unsigned long nsegs, segusages_per_block; |
| ssize_t n; |
| int ret, i, j; |
| |
| down_read(&NILFS_MDT(sufile)->mi_sem); |
| |
| segusages_per_block = nilfs_sufile_segment_usages_per_block(sufile); |
| nsegs = min_t(unsigned long, |
| nilfs_sufile_get_nsegments(sufile) - segnum, |
| nsi); |
| for (i = 0; i < nsegs; i += n, segnum += n) { |
| n = min_t(unsigned long, |
| segusages_per_block - |
| nilfs_sufile_get_offset(sufile, segnum), |
| nsegs - i); |
| ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, |
| &su_bh); |
| if (ret < 0) { |
| if (ret != -ENOENT) |
| goto out; |
| /* hole */ |
| memset(si, 0, sisz * n); |
| si = (void *)si + sisz * n; |
| continue; |
| } |
| |
| kaddr = kmap_atomic(su_bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage( |
| sufile, segnum, su_bh, kaddr); |
| for (j = 0; j < n; |
| j++, su = (void *)su + susz, si = (void *)si + sisz) { |
| si->sui_lastmod = le64_to_cpu(su->su_lastmod); |
| si->sui_nblocks = le32_to_cpu(su->su_nblocks); |
| si->sui_flags = le32_to_cpu(su->su_flags) & |
| ~BIT(NILFS_SEGMENT_USAGE_ACTIVE); |
| if (nilfs_segment_is_active(nilfs, segnum + j)) |
| si->sui_flags |= |
| BIT(NILFS_SEGMENT_USAGE_ACTIVE); |
| } |
| kunmap_atomic(kaddr); |
| brelse(su_bh); |
| } |
| ret = nsegs; |
| |
| out: |
| up_read(&NILFS_MDT(sufile)->mi_sem); |
| return ret; |
| } |
| |
| /** |
| * nilfs_sufile_set_suinfo - sets segment usage info |
| * @sufile: inode of segment usage file |
| * @buf: array of suinfo_update |
| * @supsz: byte size of suinfo_update |
| * @nsup: size of suinfo_update array |
| * |
| * Description: Takes an array of nilfs_suinfo_update structs and updates |
| * segment usage accordingly. Only the fields indicated by the sup_flags |
| * are updated. |
| * |
| * Return Value: On success, 0 is returned. On error, one of the |
| * following negative error codes is returned. |
| * |
| * %-EIO - I/O error. |
| * |
| * %-ENOMEM - Insufficient amount of memory available. |
| * |
| * %-EINVAL - Invalid values in input (segment number, flags or nblocks) |
| */ |
| ssize_t nilfs_sufile_set_suinfo(struct inode *sufile, void *buf, |
| unsigned int supsz, size_t nsup) |
| { |
| struct the_nilfs *nilfs = sufile->i_sb->s_fs_info; |
| struct buffer_head *header_bh, *bh; |
| struct nilfs_suinfo_update *sup, *supend = buf + supsz * nsup; |
| struct nilfs_segment_usage *su; |
| void *kaddr; |
| unsigned long blkoff, prev_blkoff; |
| int cleansi, cleansu, dirtysi, dirtysu; |
| long ncleaned = 0, ndirtied = 0; |
| int ret = 0; |
| |
| if (unlikely(nsup == 0)) |
| return ret; |
| |
| for (sup = buf; sup < supend; sup = (void *)sup + supsz) { |
| if (sup->sup_segnum >= nilfs->ns_nsegments |
| || (sup->sup_flags & |
| (~0UL << __NR_NILFS_SUINFO_UPDATE_FIELDS)) |
| || (nilfs_suinfo_update_nblocks(sup) && |
| sup->sup_sui.sui_nblocks > |
| nilfs->ns_blocks_per_segment)) |
| return -EINVAL; |
| } |
| |
| down_write(&NILFS_MDT(sufile)->mi_sem); |
| |
| ret = nilfs_sufile_get_header_block(sufile, &header_bh); |
| if (ret < 0) |
| goto out_sem; |
| |
| sup = buf; |
| blkoff = nilfs_sufile_get_blkoff(sufile, sup->sup_segnum); |
| ret = nilfs_mdt_get_block(sufile, blkoff, 1, NULL, &bh); |
| if (ret < 0) |
| goto out_header; |
| |
| for (;;) { |
| kaddr = kmap_atomic(bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage( |
| sufile, sup->sup_segnum, bh, kaddr); |
| |
| if (nilfs_suinfo_update_lastmod(sup)) |
| su->su_lastmod = cpu_to_le64(sup->sup_sui.sui_lastmod); |
| |
| if (nilfs_suinfo_update_nblocks(sup)) |
| su->su_nblocks = cpu_to_le32(sup->sup_sui.sui_nblocks); |
| |
| if (nilfs_suinfo_update_flags(sup)) { |
| /* |
| * Active flag is a virtual flag projected by running |
| * nilfs kernel code - drop it not to write it to |
| * disk. |
| */ |
| sup->sup_sui.sui_flags &= |
| ~BIT(NILFS_SEGMENT_USAGE_ACTIVE); |
| |
| cleansi = nilfs_suinfo_clean(&sup->sup_sui); |
| cleansu = nilfs_segment_usage_clean(su); |
| dirtysi = nilfs_suinfo_dirty(&sup->sup_sui); |
| dirtysu = nilfs_segment_usage_dirty(su); |
| |
| if (cleansi && !cleansu) |
| ++ncleaned; |
| else if (!cleansi && cleansu) |
| --ncleaned; |
| |
| if (dirtysi && !dirtysu) |
| ++ndirtied; |
| else if (!dirtysi && dirtysu) |
| --ndirtied; |
| |
| su->su_flags = cpu_to_le32(sup->sup_sui.sui_flags); |
| } |
| |
| kunmap_atomic(kaddr); |
| |
| sup = (void *)sup + supsz; |
| if (sup >= supend) |
| break; |
| |
| prev_blkoff = blkoff; |
| blkoff = nilfs_sufile_get_blkoff(sufile, sup->sup_segnum); |
| if (blkoff == prev_blkoff) |
| continue; |
| |
| /* get different block */ |
| mark_buffer_dirty(bh); |
| put_bh(bh); |
| ret = nilfs_mdt_get_block(sufile, blkoff, 1, NULL, &bh); |
| if (unlikely(ret < 0)) |
| goto out_mark; |
| } |
| mark_buffer_dirty(bh); |
| put_bh(bh); |
| |
| out_mark: |
| if (ncleaned || ndirtied) { |
| nilfs_sufile_mod_counter(header_bh, (u64)ncleaned, |
| (u64)ndirtied); |
| NILFS_SUI(sufile)->ncleansegs += ncleaned; |
| } |
| nilfs_mdt_mark_dirty(sufile); |
| out_header: |
| put_bh(header_bh); |
| out_sem: |
| up_write(&NILFS_MDT(sufile)->mi_sem); |
| return ret; |
| } |
| |
| /** |
| * nilfs_sufile_trim_fs() - trim ioctl handle function |
| * @sufile: inode of segment usage file |
| * @range: fstrim_range structure |
| * |
| * start: First Byte to trim |
| * len: number of Bytes to trim from start |
| * minlen: minimum extent length in Bytes |
| * |
| * Decription: nilfs_sufile_trim_fs goes through all segments containing bytes |
| * from start to start+len. start is rounded up to the next block boundary |
| * and start+len is rounded down. For each clean segment blkdev_issue_discard |
| * function is invoked. |
| * |
| * Return Value: On success, 0 is returned or negative error code, otherwise. |
| */ |
| int nilfs_sufile_trim_fs(struct inode *sufile, struct fstrim_range *range) |
| { |
| struct the_nilfs *nilfs = sufile->i_sb->s_fs_info; |
| struct buffer_head *su_bh; |
| struct nilfs_segment_usage *su; |
| void *kaddr; |
| size_t n, i, susz = NILFS_MDT(sufile)->mi_entry_size; |
| sector_t seg_start, seg_end, start_block, end_block; |
| sector_t start = 0, nblocks = 0; |
| u64 segnum, segnum_end, minlen, len, max_blocks, ndiscarded = 0; |
| int ret = 0; |
| unsigned int sects_per_block; |
| |
| sects_per_block = (1 << nilfs->ns_blocksize_bits) / |
| bdev_logical_block_size(nilfs->ns_bdev); |
| len = range->len >> nilfs->ns_blocksize_bits; |
| minlen = range->minlen >> nilfs->ns_blocksize_bits; |
| max_blocks = ((u64)nilfs->ns_nsegments * nilfs->ns_blocks_per_segment); |
| |
| if (!len || range->start >= max_blocks << nilfs->ns_blocksize_bits) |
| return -EINVAL; |
| |
| start_block = (range->start + nilfs->ns_blocksize - 1) >> |
| nilfs->ns_blocksize_bits; |
| |
| /* |
| * range->len can be very large (actually, it is set to |
| * ULLONG_MAX by default) - truncate upper end of the range |
| * carefully so as not to overflow. |
| */ |
| if (max_blocks - start_block < len) |
| end_block = max_blocks - 1; |
| else |
| end_block = start_block + len - 1; |
| |
| segnum = nilfs_get_segnum_of_block(nilfs, start_block); |
| segnum_end = nilfs_get_segnum_of_block(nilfs, end_block); |
| |
| down_read(&NILFS_MDT(sufile)->mi_sem); |
| |
| while (segnum <= segnum_end) { |
| n = nilfs_sufile_segment_usages_in_block(sufile, segnum, |
| segnum_end); |
| |
| ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, |
| &su_bh); |
| if (ret < 0) { |
| if (ret != -ENOENT) |
| goto out_sem; |
| /* hole */ |
| segnum += n; |
| continue; |
| } |
| |
| kaddr = kmap_atomic(su_bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage(sufile, segnum, |
| su_bh, kaddr); |
| for (i = 0; i < n; ++i, ++segnum, su = (void *)su + susz) { |
| if (!nilfs_segment_usage_clean(su)) |
| continue; |
| |
| nilfs_get_segment_range(nilfs, segnum, &seg_start, |
| &seg_end); |
| |
| if (!nblocks) { |
| /* start new extent */ |
| start = seg_start; |
| nblocks = seg_end - seg_start + 1; |
| continue; |
| } |
| |
| if (start + nblocks == seg_start) { |
| /* add to previous extent */ |
| nblocks += seg_end - seg_start + 1; |
| continue; |
| } |
| |
| /* discard previous extent */ |
| if (start < start_block) { |
| nblocks -= start_block - start; |
| start = start_block; |
| } |
| |
| if (nblocks >= minlen) { |
| kunmap_atomic(kaddr); |
| |
| ret = blkdev_issue_discard(nilfs->ns_bdev, |
| start * sects_per_block, |
| nblocks * sects_per_block, |
| GFP_NOFS, 0); |
| if (ret < 0) { |
| put_bh(su_bh); |
| goto out_sem; |
| } |
| |
| ndiscarded += nblocks; |
| kaddr = kmap_atomic(su_bh->b_page); |
| su = nilfs_sufile_block_get_segment_usage( |
| sufile, segnum, su_bh, kaddr); |
| } |
| |
| /* start new extent */ |
| start = seg_start; |
| nblocks = seg_end - seg_start + 1; |
| } |
| kunmap_atomic(kaddr); |
| put_bh(su_bh); |
| } |
| |
| |
| if (nblocks) { |
| /* discard last extent */ |
| if (start < start_block) { |
| nblocks -= start_block - start; |
| start = start_block; |
| } |
| if (start + nblocks > end_block + 1) |
| nblocks = end_block - start + 1; |
| |
| if (nblocks >= minlen) { |
| ret = blkdev_issue_discard(nilfs->ns_bdev, |
| start * sects_per_block, |
| nblocks * sects_per_block, |
| GFP_NOFS, 0); |
| if (!ret) |
| ndiscarded += nblocks; |
| } |
| } |
| |
| out_sem: |
| up_read(&NILFS_MDT(sufile)->mi_sem); |
| |
| range->len = ndiscarded << nilfs->ns_blocksize_bits; |
| return ret; |
| } |
| |
| /** |
| * nilfs_sufile_read - read or get sufile inode |
| * @sb: super block instance |
| * @susize: size of a segment usage entry |
| * @raw_inode: on-disk sufile inode |
| * @inodep: buffer to store the inode |
| */ |
| int nilfs_sufile_read(struct super_block *sb, size_t susize, |
| struct nilfs_inode *raw_inode, struct inode **inodep) |
| { |
| struct inode *sufile; |
| struct nilfs_sufile_info *sui; |
| struct buffer_head *header_bh; |
| struct nilfs_sufile_header *header; |
| void *kaddr; |
| int err; |
| |
| if (susize > sb->s_blocksize) { |
| nilfs_err(sb, "too large segment usage size: %zu bytes", |
| susize); |
| return -EINVAL; |
| } else if (susize < NILFS_MIN_SEGMENT_USAGE_SIZE) { |
| nilfs_err(sb, "too small segment usage size: %zu bytes", |
| susize); |
| return -EINVAL; |
| } |
| |
| sufile = nilfs_iget_locked(sb, NULL, NILFS_SUFILE_INO); |
| if (unlikely(!sufile)) |
| return -ENOMEM; |
| if (!(sufile->i_state & I_NEW)) |
| goto out; |
| |
| err = nilfs_mdt_init(sufile, NILFS_MDT_GFP, sizeof(*sui)); |
| if (err) |
| goto failed; |
| |
| nilfs_mdt_set_entry_size(sufile, susize, |
| sizeof(struct nilfs_sufile_header)); |
| |
| err = nilfs_read_inode_common(sufile, raw_inode); |
| if (err) |
| goto failed; |
| |
| err = nilfs_sufile_get_header_block(sufile, &header_bh); |
| if (err) |
| goto failed; |
| |
| sui = NILFS_SUI(sufile); |
| kaddr = kmap_atomic(header_bh->b_page); |
| header = kaddr + bh_offset(header_bh); |
| sui->ncleansegs = le64_to_cpu(header->sh_ncleansegs); |
| kunmap_atomic(kaddr); |
| brelse(header_bh); |
| |
| sui->allocmax = nilfs_sufile_get_nsegments(sufile) - 1; |
| sui->allocmin = 0; |
| |
| unlock_new_inode(sufile); |
| out: |
| *inodep = sufile; |
| return 0; |
| failed: |
| iget_failed(sufile); |
| return err; |
| } |