| /* | 
 |  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III | 
 |  * flexcop.c - main module part | 
 |  * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de> | 
 |  * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc | 
 |  * | 
 |  * Acknowledgements: | 
 |  *   John Jurrius from BBTI, Inc. for extensive support | 
 |  *                    with code examples and data books | 
 |  *   Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting) | 
 |  * | 
 |  * Contributions to the skystar2-driver have been done by | 
 |  *   Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes) | 
 |  *   Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code) | 
 |  *   Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu) | 
 |  *   Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac | 
 |  *               filtering) | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU Lesser General Public License | 
 |  * as published by the Free Software Foundation; either version 2.1 | 
 |  * of the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU Lesser General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
 |  */ | 
 |  | 
 | #include "flexcop.h" | 
 |  | 
 | #define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip" | 
 | #define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de" | 
 |  | 
 | #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG | 
 | #define DEBSTATUS "" | 
 | #else | 
 | #define DEBSTATUS " (debugging is not enabled)" | 
 | #endif | 
 |  | 
 | int b2c2_flexcop_debug; | 
 | module_param_named(debug, b2c2_flexcop_debug,  int, 0644); | 
 | MODULE_PARM_DESC(debug, | 
 | 		"set debug level (1=info,2=tuner,4=i2c,8=ts," | 
 | 		"16=sram,32=reg (|-able))." | 
 | 		DEBSTATUS); | 
 | #undef DEBSTATUS | 
 |  | 
 | DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); | 
 |  | 
 | /* global zero for ibi values */ | 
 | flexcop_ibi_value ibi_zero; | 
 |  | 
 | static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) | 
 | { | 
 | 	struct flexcop_device *fc = dvbdmxfeed->demux->priv; | 
 | 	return flexcop_pid_feed_control(fc, dvbdmxfeed, 1); | 
 | } | 
 |  | 
 | static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) | 
 | { | 
 | 	struct flexcop_device *fc = dvbdmxfeed->demux->priv; | 
 | 	return flexcop_pid_feed_control(fc, dvbdmxfeed, 0); | 
 | } | 
 |  | 
 | static int flexcop_dvb_init(struct flexcop_device *fc) | 
 | { | 
 | 	int ret = dvb_register_adapter(&fc->dvb_adapter, | 
 | 			"FlexCop Digital TV device", fc->owner, | 
 | 			fc->dev, adapter_nr); | 
 | 	if (ret < 0) { | 
 | 		err("error registering DVB adapter"); | 
 | 		return ret; | 
 | 	} | 
 | 	fc->dvb_adapter.priv = fc; | 
 |  | 
 | 	fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | 
 | 			| DMX_MEMORY_BASED_FILTERING); | 
 | 	fc->demux.priv = fc; | 
 | 	fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED; | 
 | 	fc->demux.start_feed = flexcop_dvb_start_feed; | 
 | 	fc->demux.stop_feed = flexcop_dvb_stop_feed; | 
 | 	fc->demux.write_to_decoder = NULL; | 
 |  | 
 | 	if ((ret = dvb_dmx_init(&fc->demux)) < 0) { | 
 | 		err("dvb_dmx failed: error %d", ret); | 
 | 		goto err_dmx; | 
 | 	} | 
 |  | 
 | 	fc->hw_frontend.source = DMX_FRONTEND_0; | 
 |  | 
 | 	fc->dmxdev.filternum = fc->demux.feednum; | 
 | 	fc->dmxdev.demux = &fc->demux.dmx; | 
 | 	fc->dmxdev.capabilities = 0; | 
 | 	if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) { | 
 | 		err("dvb_dmxdev_init failed: error %d", ret); | 
 | 		goto err_dmx_dev; | 
 | 	} | 
 |  | 
 | 	if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { | 
 | 		err("adding hw_frontend to dmx failed: error %d", ret); | 
 | 		goto err_dmx_add_hw_frontend; | 
 | 	} | 
 |  | 
 | 	fc->mem_frontend.source = DMX_MEMORY_FE; | 
 | 	if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) { | 
 | 		err("adding mem_frontend to dmx failed: error %d", ret); | 
 | 		goto err_dmx_add_mem_frontend; | 
 | 	} | 
 |  | 
 | 	if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { | 
 | 		err("connect frontend failed: error %d", ret); | 
 | 		goto err_connect_frontend; | 
 | 	} | 
 |  | 
 | 	dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx); | 
 |  | 
 | 	fc->init_state |= FC_STATE_DVB_INIT; | 
 | 	return 0; | 
 |  | 
 | err_connect_frontend: | 
 | 	fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend); | 
 | err_dmx_add_mem_frontend: | 
 | 	fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend); | 
 | err_dmx_add_hw_frontend: | 
 | 	dvb_dmxdev_release(&fc->dmxdev); | 
 | err_dmx_dev: | 
 | 	dvb_dmx_release(&fc->demux); | 
 | err_dmx: | 
 | 	dvb_unregister_adapter(&fc->dvb_adapter); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void flexcop_dvb_exit(struct flexcop_device *fc) | 
 | { | 
 | 	if (fc->init_state & FC_STATE_DVB_INIT) { | 
 | 		dvb_net_release(&fc->dvbnet); | 
 |  | 
 | 		fc->demux.dmx.close(&fc->demux.dmx); | 
 | 		fc->demux.dmx.remove_frontend(&fc->demux.dmx, | 
 | 			&fc->mem_frontend); | 
 | 		fc->demux.dmx.remove_frontend(&fc->demux.dmx, | 
 | 			&fc->hw_frontend); | 
 | 		dvb_dmxdev_release(&fc->dmxdev); | 
 | 		dvb_dmx_release(&fc->demux); | 
 | 		dvb_unregister_adapter(&fc->dvb_adapter); | 
 | 		deb_info("deinitialized dvb stuff\n"); | 
 | 	} | 
 | 	fc->init_state &= ~FC_STATE_DVB_INIT; | 
 | } | 
 |  | 
 | /* these methods are necessary to achieve the long-term-goal of hiding the | 
 |  * struct flexcop_device from the bus-parts */ | 
 | void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len) | 
 | { | 
 | 	dvb_dmx_swfilter(&fc->demux, buf, len); | 
 | } | 
 | EXPORT_SYMBOL(flexcop_pass_dmx_data); | 
 |  | 
 | void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no) | 
 | { | 
 | 	dvb_dmx_swfilter_packets(&fc->demux, buf, no); | 
 | } | 
 | EXPORT_SYMBOL(flexcop_pass_dmx_packets); | 
 |  | 
 | static void flexcop_reset(struct flexcop_device *fc) | 
 | { | 
 | 	flexcop_ibi_value v210, v204; | 
 |  | 
 | 	/* reset the flexcop itself */ | 
 | 	fc->write_ibi_reg(fc,ctrl_208,ibi_zero); | 
 |  | 
 | 	v210.raw = 0; | 
 | 	v210.sw_reset_210.reset_block_000 = 1; | 
 | 	v210.sw_reset_210.reset_block_100 = 1; | 
 | 	v210.sw_reset_210.reset_block_200 = 1; | 
 | 	v210.sw_reset_210.reset_block_300 = 1; | 
 | 	v210.sw_reset_210.reset_block_400 = 1; | 
 | 	v210.sw_reset_210.reset_block_500 = 1; | 
 | 	v210.sw_reset_210.reset_block_600 = 1; | 
 | 	v210.sw_reset_210.reset_block_700 = 1; | 
 | 	v210.sw_reset_210.Block_reset_enable = 0xb2; | 
 | 	v210.sw_reset_210.Special_controls = 0xc259; | 
 | 	fc->write_ibi_reg(fc,sw_reset_210,v210); | 
 | 	msleep(1); | 
 |  | 
 | 	/* reset the periphical devices */ | 
 |  | 
 | 	v204 = fc->read_ibi_reg(fc,misc_204); | 
 | 	v204.misc_204.Per_reset_sig = 0; | 
 | 	fc->write_ibi_reg(fc,misc_204,v204); | 
 | 	msleep(1); | 
 | 	v204.misc_204.Per_reset_sig = 1; | 
 | 	fc->write_ibi_reg(fc,misc_204,v204); | 
 | } | 
 |  | 
 | void flexcop_reset_block_300(struct flexcop_device *fc) | 
 | { | 
 | 	flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208), | 
 | 			  v210 = fc->read_ibi_reg(fc, sw_reset_210); | 
 |  | 
 | 	deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw); | 
 | 	fc->write_ibi_reg(fc,ctrl_208,ibi_zero); | 
 |  | 
 | 	v210.sw_reset_210.reset_block_300 = 1; | 
 | 	v210.sw_reset_210.Block_reset_enable = 0xb2; | 
 |  | 
 | 	fc->write_ibi_reg(fc,sw_reset_210,v210); | 
 | 	fc->write_ibi_reg(fc,ctrl_208,v208_save); | 
 | } | 
 |  | 
 | struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) | 
 | { | 
 | 	void *bus; | 
 | 	struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), | 
 | 				GFP_KERNEL); | 
 | 	if (!fc) { | 
 | 		err("no memory"); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	bus = kzalloc(bus_specific_len, GFP_KERNEL); | 
 | 	if (!bus) { | 
 | 		err("no memory"); | 
 | 		kfree(fc); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	fc->bus_specific = bus; | 
 |  | 
 | 	return fc; | 
 | } | 
 | EXPORT_SYMBOL(flexcop_device_kmalloc); | 
 |  | 
 | void flexcop_device_kfree(struct flexcop_device *fc) | 
 | { | 
 | 	kfree(fc->bus_specific); | 
 | 	kfree(fc); | 
 | } | 
 | EXPORT_SYMBOL(flexcop_device_kfree); | 
 |  | 
 | int flexcop_device_initialize(struct flexcop_device *fc) | 
 | { | 
 | 	int ret; | 
 | 	ibi_zero.raw = 0; | 
 |  | 
 | 	flexcop_reset(fc); | 
 | 	flexcop_determine_revision(fc); | 
 | 	flexcop_sram_init(fc); | 
 | 	flexcop_hw_filter_init(fc); | 
 | 	flexcop_smc_ctrl(fc, 0); | 
 |  | 
 | 	if ((ret = flexcop_dvb_init(fc))) | 
 | 		goto error; | 
 |  | 
 | 	/* i2c has to be done before doing EEProm stuff - | 
 | 	 * because the EEProm is accessed via i2c */ | 
 | 	ret = flexcop_i2c_init(fc); | 
 | 	if (ret) | 
 | 		goto error; | 
 |  | 
 | 	/* do the MAC address reading after initializing the dvb_adapter */ | 
 | 	if (fc->get_mac_addr(fc, 0) == 0) { | 
 | 		u8 *b = fc->dvb_adapter.proposed_mac; | 
 | 		info("MAC address = %pM", b); | 
 | 		flexcop_set_mac_filter(fc,b); | 
 | 		flexcop_mac_filter_ctrl(fc,1); | 
 | 	} else | 
 | 		warn("reading of MAC address failed.\n"); | 
 |  | 
 | 	if ((ret = flexcop_frontend_init(fc))) | 
 | 		goto error; | 
 |  | 
 | 	flexcop_device_name(fc,"initialization of","complete"); | 
 | 	return 0; | 
 |  | 
 | error: | 
 | 	flexcop_device_exit(fc); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(flexcop_device_initialize); | 
 |  | 
 | void flexcop_device_exit(struct flexcop_device *fc) | 
 | { | 
 | 	flexcop_frontend_exit(fc); | 
 | 	flexcop_i2c_exit(fc); | 
 | 	flexcop_dvb_exit(fc); | 
 | } | 
 | EXPORT_SYMBOL(flexcop_device_exit); | 
 |  | 
 | static int flexcop_module_init(void) | 
 | { | 
 | 	info(DRIVER_NAME " loaded successfully"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void flexcop_module_cleanup(void) | 
 | { | 
 | 	info(DRIVER_NAME " unloaded successfully"); | 
 | } | 
 |  | 
 | module_init(flexcop_module_init); | 
 | module_exit(flexcop_module_cleanup); | 
 |  | 
 | MODULE_AUTHOR(DRIVER_AUTHOR); | 
 | MODULE_DESCRIPTION(DRIVER_NAME); | 
 | MODULE_LICENSE("GPL"); |