| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> |
| */ |
| #include <linux/if_vlan.h> |
| #include <linux/dsa/sja1105.h> |
| #include <linux/dsa/8021q.h> |
| #include <linux/packing.h> |
| #include "dsa_priv.h" |
| |
| /* Similar to is_link_local_ether_addr(hdr->h_dest) but also covers PTP */ |
| static inline bool sja1105_is_link_local(const struct sk_buff *skb) |
| { |
| const struct ethhdr *hdr = eth_hdr(skb); |
| u64 dmac = ether_addr_to_u64(hdr->h_dest); |
| |
| if (ntohs(hdr->h_proto) == ETH_P_SJA1105_META) |
| return false; |
| if ((dmac & SJA1105_LINKLOCAL_FILTER_A_MASK) == |
| SJA1105_LINKLOCAL_FILTER_A) |
| return true; |
| if ((dmac & SJA1105_LINKLOCAL_FILTER_B_MASK) == |
| SJA1105_LINKLOCAL_FILTER_B) |
| return true; |
| return false; |
| } |
| |
| struct sja1105_meta { |
| u64 tstamp; |
| u64 dmac_byte_4; |
| u64 dmac_byte_3; |
| u64 source_port; |
| u64 switch_id; |
| }; |
| |
| static void sja1105_meta_unpack(const struct sk_buff *skb, |
| struct sja1105_meta *meta) |
| { |
| u8 *buf = skb_mac_header(skb) + ETH_HLEN; |
| |
| /* UM10944.pdf section 4.2.17 AVB Parameters: |
| * Structure of the meta-data follow-up frame. |
| * It is in network byte order, so there are no quirks |
| * while unpacking the meta frame. |
| * |
| * Also SJA1105 E/T only populates bits 23:0 of the timestamp |
| * whereas P/Q/R/S does 32 bits. Since the structure is the |
| * same and the E/T puts zeroes in the high-order byte, use |
| * a unified unpacking command for both device series. |
| */ |
| packing(buf, &meta->tstamp, 31, 0, 4, UNPACK, 0); |
| packing(buf + 4, &meta->dmac_byte_4, 7, 0, 1, UNPACK, 0); |
| packing(buf + 5, &meta->dmac_byte_3, 7, 0, 1, UNPACK, 0); |
| packing(buf + 6, &meta->source_port, 7, 0, 1, UNPACK, 0); |
| packing(buf + 7, &meta->switch_id, 7, 0, 1, UNPACK, 0); |
| } |
| |
| static inline bool sja1105_is_meta_frame(const struct sk_buff *skb) |
| { |
| const struct ethhdr *hdr = eth_hdr(skb); |
| u64 smac = ether_addr_to_u64(hdr->h_source); |
| u64 dmac = ether_addr_to_u64(hdr->h_dest); |
| |
| if (smac != SJA1105_META_SMAC) |
| return false; |
| if (dmac != SJA1105_META_DMAC) |
| return false; |
| if (ntohs(hdr->h_proto) != ETH_P_SJA1105_META) |
| return false; |
| return true; |
| } |
| |
| /* This is the first time the tagger sees the frame on RX. |
| * Figure out if we can decode it. |
| */ |
| static bool sja1105_filter(const struct sk_buff *skb, struct net_device *dev) |
| { |
| if (!dsa_port_is_vlan_filtering(dev->dsa_ptr)) |
| return true; |
| if (sja1105_is_link_local(skb)) |
| return true; |
| if (sja1105_is_meta_frame(skb)) |
| return true; |
| return false; |
| } |
| |
| static struct sk_buff *sja1105_xmit(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct dsa_port *dp = dsa_slave_to_port(netdev); |
| struct dsa_switch *ds = dp->ds; |
| u16 tx_vid = dsa_8021q_tx_vid(ds, dp->index); |
| u16 queue_mapping = skb_get_queue_mapping(skb); |
| u8 pcp = netdev_txq_to_tc(netdev, queue_mapping); |
| |
| /* Transmitting management traffic does not rely upon switch tagging, |
| * but instead SPI-installed management routes. Part 2 of this |
| * is the .port_deferred_xmit driver callback. |
| */ |
| if (unlikely(sja1105_is_link_local(skb))) |
| return dsa_defer_xmit(skb, netdev); |
| |
| /* If we are under a vlan_filtering bridge, IP termination on |
| * switch ports based on 802.1Q tags is simply too brittle to |
| * be passable. So just defer to the dsa_slave_notag_xmit |
| * implementation. |
| */ |
| if (dsa_port_is_vlan_filtering(dp)) |
| return skb; |
| |
| return dsa_8021q_xmit(skb, netdev, ETH_P_SJA1105, |
| ((pcp << VLAN_PRIO_SHIFT) | tx_vid)); |
| } |
| |
| static void sja1105_transfer_meta(struct sk_buff *skb, |
| const struct sja1105_meta *meta) |
| { |
| struct ethhdr *hdr = eth_hdr(skb); |
| |
| hdr->h_dest[3] = meta->dmac_byte_3; |
| hdr->h_dest[4] = meta->dmac_byte_4; |
| SJA1105_SKB_CB(skb)->meta_tstamp = meta->tstamp; |
| } |
| |
| /* This is a simple state machine which follows the hardware mechanism of |
| * generating RX timestamps: |
| * |
| * After each timestampable skb (all traffic for which send_meta1 and |
| * send_meta0 is true, aka all MAC-filtered link-local traffic) a meta frame |
| * containing a partial timestamp is immediately generated by the switch and |
| * sent as a follow-up to the link-local frame on the CPU port. |
| * |
| * The meta frames have no unique identifier (such as sequence number) by which |
| * one may pair them to the correct timestampable frame. |
| * Instead, the switch has internal logic that ensures no frames are sent on |
| * the CPU port between a link-local timestampable frame and its corresponding |
| * meta follow-up. It also ensures strict ordering between ports (lower ports |
| * have higher priority towards the CPU port). For this reason, a per-port |
| * data structure is not needed/desirable. |
| * |
| * This function pairs the link-local frame with its partial timestamp from the |
| * meta follow-up frame. The full timestamp will be reconstructed later in a |
| * work queue. |
| */ |
| static struct sk_buff |
| *sja1105_rcv_meta_state_machine(struct sk_buff *skb, |
| struct sja1105_meta *meta, |
| bool is_link_local, |
| bool is_meta) |
| { |
| struct sja1105_port *sp; |
| struct dsa_port *dp; |
| |
| dp = dsa_slave_to_port(skb->dev); |
| sp = dp->priv; |
| |
| /* Step 1: A timestampable frame was received. |
| * Buffer it until we get its meta frame. |
| */ |
| if (is_link_local && sp->data->hwts_rx_en) { |
| spin_lock(&sp->data->meta_lock); |
| /* Was this a link-local frame instead of the meta |
| * that we were expecting? |
| */ |
| if (sp->data->stampable_skb) { |
| dev_err_ratelimited(dp->ds->dev, |
| "Expected meta frame, is %12llx " |
| "in the DSA master multicast filter?\n", |
| SJA1105_META_DMAC); |
| kfree_skb(sp->data->stampable_skb); |
| } |
| |
| /* Hold a reference to avoid dsa_switch_rcv |
| * from freeing the skb. |
| */ |
| sp->data->stampable_skb = skb_get(skb); |
| spin_unlock(&sp->data->meta_lock); |
| |
| /* Tell DSA we got nothing */ |
| return NULL; |
| |
| /* Step 2: The meta frame arrived. |
| * Time to take the stampable skb out of the closet, annotate it |
| * with the partial timestamp, and pretend that we received it |
| * just now (basically masquerade the buffered frame as the meta |
| * frame, which serves no further purpose). |
| */ |
| } else if (is_meta) { |
| struct sk_buff *stampable_skb; |
| |
| spin_lock(&sp->data->meta_lock); |
| |
| stampable_skb = sp->data->stampable_skb; |
| sp->data->stampable_skb = NULL; |
| |
| /* Was this a meta frame instead of the link-local |
| * that we were expecting? |
| */ |
| if (!stampable_skb) { |
| dev_err_ratelimited(dp->ds->dev, |
| "Unexpected meta frame\n"); |
| spin_unlock(&sp->data->meta_lock); |
| return NULL; |
| } |
| |
| if (stampable_skb->dev != skb->dev) { |
| dev_err_ratelimited(dp->ds->dev, |
| "Meta frame on wrong port\n"); |
| spin_unlock(&sp->data->meta_lock); |
| return NULL; |
| } |
| |
| /* Free the meta frame and give DSA the buffered stampable_skb |
| * for further processing up the network stack. |
| */ |
| kfree_skb(skb); |
| skb = stampable_skb; |
| sja1105_transfer_meta(skb, meta); |
| |
| spin_unlock(&sp->data->meta_lock); |
| } |
| |
| return skb; |
| } |
| |
| static struct sk_buff *sja1105_rcv(struct sk_buff *skb, |
| struct net_device *netdev, |
| struct packet_type *pt) |
| { |
| struct sja1105_meta meta = {0}; |
| int source_port, switch_id; |
| struct vlan_ethhdr *hdr; |
| u16 tpid, vid, tci; |
| bool is_link_local; |
| bool is_tagged; |
| bool is_meta; |
| |
| hdr = vlan_eth_hdr(skb); |
| tpid = ntohs(hdr->h_vlan_proto); |
| is_tagged = (tpid == ETH_P_SJA1105); |
| is_link_local = sja1105_is_link_local(skb); |
| is_meta = sja1105_is_meta_frame(skb); |
| |
| skb->offload_fwd_mark = 1; |
| |
| if (is_tagged) { |
| /* Normal traffic path. */ |
| tci = ntohs(hdr->h_vlan_TCI); |
| vid = tci & VLAN_VID_MASK; |
| source_port = dsa_8021q_rx_source_port(vid); |
| switch_id = dsa_8021q_rx_switch_id(vid); |
| skb->priority = (tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT; |
| } else if (is_link_local) { |
| /* Management traffic path. Switch embeds the switch ID and |
| * port ID into bytes of the destination MAC, courtesy of |
| * the incl_srcpt options. |
| */ |
| source_port = hdr->h_dest[3]; |
| switch_id = hdr->h_dest[4]; |
| /* Clear the DMAC bytes that were mangled by the switch */ |
| hdr->h_dest[3] = 0; |
| hdr->h_dest[4] = 0; |
| } else if (is_meta) { |
| sja1105_meta_unpack(skb, &meta); |
| source_port = meta.source_port; |
| switch_id = meta.switch_id; |
| } else { |
| return NULL; |
| } |
| |
| skb->dev = dsa_master_find_slave(netdev, switch_id, source_port); |
| if (!skb->dev) { |
| netdev_warn(netdev, "Couldn't decode source port\n"); |
| return NULL; |
| } |
| |
| /* Delete/overwrite fake VLAN header, DSA expects to not find |
| * it there, see dsa_switch_rcv: skb_push(skb, ETH_HLEN). |
| */ |
| if (is_tagged) |
| skb = dsa_8021q_remove_header(skb); |
| |
| return sja1105_rcv_meta_state_machine(skb, &meta, is_link_local, |
| is_meta); |
| } |
| |
| static struct dsa_device_ops sja1105_netdev_ops = { |
| .name = "sja1105", |
| .proto = DSA_TAG_PROTO_SJA1105, |
| .xmit = sja1105_xmit, |
| .rcv = sja1105_rcv, |
| .filter = sja1105_filter, |
| .overhead = VLAN_HLEN, |
| }; |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_SJA1105); |
| |
| module_dsa_tag_driver(sja1105_netdev_ops); |