| /* |
| * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION |
| * |
| * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include "am335x-igep0033.dtsi" |
| |
| / { |
| model = "IGEP COM AM335x on AQUILA Expansion"; |
| compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; |
| |
| hdmi { |
| compatible = "ti,tilcdc,slave"; |
| i2c = <&i2c0>; |
| pinctrl-names = "default", "off"; |
| pinctrl-0 = <&nxp_hdmi_pins>; |
| pinctrl-1 = <&nxp_hdmi_off_pins>; |
| status = "okay"; |
| }; |
| |
| leds_base { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&leds_base_pins>; |
| |
| compatible = "gpio-leds"; |
| |
| led@0 { |
| label = "base:red:user"; |
| gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ |
| default-state = "off"; |
| }; |
| |
| led@1 { |
| label = "base:green:user"; |
| gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ |
| default-state = "off"; |
| }; |
| }; |
| }; |
| |
| &am33xx_pinmux { |
| nxp_hdmi_pins: pinmux_nxp_hdmi_pins { |
| pinctrl-single,pins = < |
| 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ |
| 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ |
| 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ |
| 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ |
| 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ |
| 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ |
| 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ |
| 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ |
| 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ |
| 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ |
| 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ |
| 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ |
| 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ |
| 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ |
| 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ |
| 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ |
| 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ |
| 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ |
| 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ |
| 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ |
| 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ |
| >; |
| }; |
| nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { |
| pinctrl-single,pins = < |
| 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ |
| >; |
| }; |
| |
| leds_base_pins: pinmux_leds_base_pins { |
| pinctrl-single,pins = < |
| 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ |
| 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ |
| >; |
| }; |
| }; |
| |
| &lcdc { |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| eeprom: eeprom@50 { |
| compatible = "at,24c256"; |
| reg = <0x50>; |
| }; |
| }; |