| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * machine_kexec.c - handle transition of Linux booting another kernel |
| * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> |
| * |
| * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz |
| * LANDISK/sh4 supported by kogiidena |
| */ |
| #include <linux/mm.h> |
| #include <linux/kexec.h> |
| #include <linux/delay.h> |
| #include <linux/reboot.h> |
| #include <linux/numa.h> |
| #include <linux/ftrace.h> |
| #include <linux/suspend.h> |
| #include <linux/memblock.h> |
| #include <asm/mmu_context.h> |
| #include <asm/io.h> |
| #include <asm/cacheflush.h> |
| #include <asm/sh_bios.h> |
| #include <asm/reboot.h> |
| |
| typedef void (*relocate_new_kernel_t)(unsigned long indirection_page, |
| unsigned long reboot_code_buffer, |
| unsigned long start_address); |
| |
| extern const unsigned char relocate_new_kernel[]; |
| extern const unsigned int relocate_new_kernel_size; |
| extern void *vbr_base; |
| |
| void native_machine_crash_shutdown(struct pt_regs *regs) |
| { |
| /* Nothing to do for UP, but definitely broken for SMP.. */ |
| } |
| |
| /* |
| * Do what every setup is needed on image and the |
| * reboot code buffer to allow us to avoid allocations |
| * later. |
| */ |
| int machine_kexec_prepare(struct kimage *image) |
| { |
| return 0; |
| } |
| |
| void machine_kexec_cleanup(struct kimage *image) |
| { |
| } |
| |
| static void kexec_info(struct kimage *image) |
| { |
| int i; |
| printk("kexec information\n"); |
| for (i = 0; i < image->nr_segments; i++) { |
| printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n", |
| i, |
| (unsigned int)image->segment[i].mem, |
| (unsigned int)image->segment[i].mem + |
| image->segment[i].memsz, |
| (unsigned int)image->segment[i].memsz); |
| } |
| printk(" start : 0x%08x\n\n", (unsigned int)image->start); |
| } |
| |
| /* |
| * Do not allocate memory (or fail in any way) in machine_kexec(). |
| * We are past the point of no return, committed to rebooting now. |
| */ |
| void machine_kexec(struct kimage *image) |
| { |
| unsigned long page_list; |
| unsigned long reboot_code_buffer; |
| relocate_new_kernel_t rnk; |
| unsigned long entry; |
| unsigned long *ptr; |
| int save_ftrace_enabled; |
| |
| /* |
| * Nicked from the mips version of machine_kexec(): |
| * The generic kexec code builds a page list with physical |
| * addresses. Use phys_to_virt() to convert them to virtual. |
| */ |
| for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE); |
| ptr = (entry & IND_INDIRECTION) ? |
| phys_to_virt(entry & PAGE_MASK) : ptr + 1) { |
| if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION || |
| *ptr & IND_DESTINATION) |
| *ptr = (unsigned long) phys_to_virt(*ptr); |
| } |
| |
| #ifdef CONFIG_KEXEC_JUMP |
| if (image->preserve_context) |
| save_processor_state(); |
| #endif |
| |
| save_ftrace_enabled = __ftrace_enabled_save(); |
| |
| /* Interrupts aren't acceptable while we reboot */ |
| local_irq_disable(); |
| |
| page_list = image->head; |
| |
| /* we need both effective and real address here */ |
| reboot_code_buffer = |
| (unsigned long)page_address(image->control_code_page); |
| |
| /* copy our kernel relocation code to the control code page */ |
| memcpy((void *)reboot_code_buffer, relocate_new_kernel, |
| relocate_new_kernel_size); |
| |
| kexec_info(image); |
| flush_cache_all(); |
| |
| sh_bios_vbr_reload(); |
| |
| /* now call it */ |
| rnk = (relocate_new_kernel_t) reboot_code_buffer; |
| (*rnk)(page_list, reboot_code_buffer, |
| (unsigned long)phys_to_virt(image->start)); |
| |
| #ifdef CONFIG_KEXEC_JUMP |
| asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory"); |
| |
| if (image->preserve_context) |
| restore_processor_state(); |
| |
| /* Convert page list back to physical addresses, what a mess. */ |
| for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE); |
| ptr = (*ptr & IND_INDIRECTION) ? |
| phys_to_virt(*ptr & PAGE_MASK) : ptr + 1) { |
| if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION || |
| *ptr & IND_DESTINATION) |
| *ptr = virt_to_phys(*ptr); |
| } |
| #endif |
| |
| __ftrace_enabled_restore(save_ftrace_enabled); |
| } |
| |
| void __init reserve_crashkernel(void) |
| { |
| unsigned long long crash_size, crash_base; |
| int ret; |
| |
| if (!IS_ENABLED(CONFIG_CRASH_RESERVE)) |
| return; |
| |
| ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(), |
| &crash_size, &crash_base, NULL, NULL); |
| if (ret == 0 && crash_size > 0) { |
| crashk_res.start = crash_base; |
| crashk_res.end = crash_base + crash_size - 1; |
| } |
| |
| if (crashk_res.end == crashk_res.start) |
| goto disable; |
| |
| crash_size = PAGE_ALIGN(resource_size(&crashk_res)); |
| if (!crashk_res.start) { |
| unsigned long max = memblock_end_of_DRAM() - memory_limit; |
| crashk_res.start = memblock_phys_alloc_range(crash_size, |
| PAGE_SIZE, 0, max); |
| if (!crashk_res.start) { |
| pr_err("crashkernel allocation failed\n"); |
| goto disable; |
| } |
| } else { |
| ret = memblock_reserve(crashk_res.start, crash_size); |
| if (unlikely(ret < 0)) { |
| pr_err("crashkernel reservation failed - " |
| "memory is in use\n"); |
| goto disable; |
| } |
| } |
| |
| crashk_res.end = crashk_res.start + crash_size - 1; |
| |
| /* |
| * Crash kernel trumps memory limit |
| */ |
| if ((memblock_end_of_DRAM() - memory_limit) <= crashk_res.end) { |
| memory_limit = 0; |
| pr_info("Disabled memory limit for crashkernel\n"); |
| } |
| |
| pr_info("Reserving %ldMB of memory at 0x%08lx " |
| "for crashkernel (System RAM: %ldMB)\n", |
| (unsigned long)(crash_size >> 20), |
| (unsigned long)(crashk_res.start), |
| (unsigned long)(memblock_phys_mem_size() >> 20)); |
| |
| return; |
| |
| disable: |
| crashk_res.start = crashk_res.end = 0; |
| } |