| /* |
| * drivers/net/ethernet/mellanox/mlxsw/pci.h |
| * Copyright (c) 2015 Mellanox Technologies. All rights reserved. |
| * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _MLXSW_PCI_H |
| #define _MLXSW_PCI_H |
| |
| #include <linux/bitops.h> |
| |
| #include "item.h" |
| |
| #define PCI_DEVICE_ID_MELLANOX_SWITCHX2 0xc738 |
| #define PCI_DEVICE_ID_MELLANOX_SPECTRUM 0xcb84 |
| #define MLXSW_PCI_BAR0_SIZE (1024 * 1024) /* 1MB */ |
| #define MLXSW_PCI_PAGE_SIZE 4096 |
| |
| #define MLXSW_PCI_CIR_BASE 0x71000 |
| #define MLXSW_PCI_CIR_IN_PARAM_HI MLXSW_PCI_CIR_BASE |
| #define MLXSW_PCI_CIR_IN_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x04) |
| #define MLXSW_PCI_CIR_IN_MODIFIER (MLXSW_PCI_CIR_BASE + 0x08) |
| #define MLXSW_PCI_CIR_OUT_PARAM_HI (MLXSW_PCI_CIR_BASE + 0x0C) |
| #define MLXSW_PCI_CIR_OUT_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x10) |
| #define MLXSW_PCI_CIR_TOKEN (MLXSW_PCI_CIR_BASE + 0x14) |
| #define MLXSW_PCI_CIR_CTRL (MLXSW_PCI_CIR_BASE + 0x18) |
| #define MLXSW_PCI_CIR_CTRL_GO_BIT BIT(23) |
| #define MLXSW_PCI_CIR_CTRL_EVREQ_BIT BIT(22) |
| #define MLXSW_PCI_CIR_CTRL_OPCODE_MOD_SHIFT 12 |
| #define MLXSW_PCI_CIR_CTRL_STATUS_SHIFT 24 |
| #define MLXSW_PCI_CIR_TIMEOUT_MSECS 1000 |
| |
| #define MLXSW_PCI_SW_RESET 0xF0010 |
| #define MLXSW_PCI_SW_RESET_RST_BIT BIT(0) |
| #define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000 |
| |
| #define MLXSW_PCI_DOORBELL_SDQ_OFFSET 0x000 |
| #define MLXSW_PCI_DOORBELL_RDQ_OFFSET 0x200 |
| #define MLXSW_PCI_DOORBELL_CQ_OFFSET 0x400 |
| #define MLXSW_PCI_DOORBELL_EQ_OFFSET 0x600 |
| #define MLXSW_PCI_DOORBELL_ARM_CQ_OFFSET 0x800 |
| #define MLXSW_PCI_DOORBELL_ARM_EQ_OFFSET 0xA00 |
| |
| #define MLXSW_PCI_DOORBELL(offset, type_offset, num) \ |
| ((offset) + (type_offset) + (num) * 4) |
| |
| #define MLXSW_PCI_CQS_MAX 96 |
| #define MLXSW_PCI_EQS_COUNT 2 |
| #define MLXSW_PCI_EQ_ASYNC_NUM 0 |
| #define MLXSW_PCI_EQ_COMP_NUM 1 |
| |
| #define MLXSW_PCI_AQ_PAGES 8 |
| #define MLXSW_PCI_AQ_SIZE (MLXSW_PCI_PAGE_SIZE * MLXSW_PCI_AQ_PAGES) |
| #define MLXSW_PCI_WQE_SIZE 32 /* 32 bytes per element */ |
| #define MLXSW_PCI_CQE_SIZE 16 /* 16 bytes per element */ |
| #define MLXSW_PCI_EQE_SIZE 16 /* 16 bytes per element */ |
| #define MLXSW_PCI_WQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_WQE_SIZE) |
| #define MLXSW_PCI_CQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE_SIZE) |
| #define MLXSW_PCI_EQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_EQE_SIZE) |
| #define MLXSW_PCI_EQE_UPDATE_COUNT 0x80 |
| |
| #define MLXSW_PCI_WQE_SG_ENTRIES 3 |
| #define MLXSW_PCI_WQE_TYPE_ETHERNET 0xA |
| |
| /* pci_wqe_c |
| * If set it indicates that a completion should be reported upon |
| * execution of this descriptor. |
| */ |
| MLXSW_ITEM32(pci, wqe, c, 0x00, 31, 1); |
| |
| /* pci_wqe_lp |
| * Local Processing, set if packet should be processed by the local |
| * switch hardware: |
| * For Ethernet EMAD (Direct Route and non Direct Route) - |
| * must be set if packet destination is local device |
| * For InfiniBand CTL - must be set if packet destination is local device |
| * Otherwise it must be clear |
| * Local Process packets must not exceed the size of 2K (including payload |
| * and headers). |
| */ |
| MLXSW_ITEM32(pci, wqe, lp, 0x00, 30, 1); |
| |
| /* pci_wqe_type |
| * Packet type. |
| */ |
| MLXSW_ITEM32(pci, wqe, type, 0x00, 23, 4); |
| |
| /* pci_wqe_byte_count |
| * Size of i-th scatter/gather entry, 0 if entry is unused. |
| */ |
| MLXSW_ITEM16_INDEXED(pci, wqe, byte_count, 0x02, 0, 14, 0x02, 0x00, false); |
| |
| /* pci_wqe_address |
| * Physical address of i-th scatter/gather entry. |
| * Gather Entries must be 2Byte aligned. |
| */ |
| MLXSW_ITEM64_INDEXED(pci, wqe, address, 0x08, 0, 64, 0x8, 0x0, false); |
| |
| /* pci_cqe_lag |
| * Packet arrives from a port which is a LAG |
| */ |
| MLXSW_ITEM32(pci, cqe, lag, 0x00, 23, 1); |
| |
| /* pci_cqe_system_port |
| * When lag=0: System port on which the packet was received |
| * When lag=1: |
| * bits [15:4] LAG ID on which the packet was received |
| * bits [3:0] sub_port on which the packet was received |
| */ |
| MLXSW_ITEM32(pci, cqe, system_port, 0x00, 0, 16); |
| |
| /* pci_cqe_wqe_counter |
| * WQE count of the WQEs completed on the associated dqn |
| */ |
| MLXSW_ITEM32(pci, cqe, wqe_counter, 0x04, 16, 16); |
| |
| /* pci_cqe_byte_count |
| * Byte count of received packets including additional two |
| * Reserved Bytes that are append to the end of the frame. |
| * Reserved for Send CQE. |
| */ |
| MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14); |
| |
| /* pci_cqe_trap_id |
| * Trap ID that captured the packet. |
| */ |
| MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 8); |
| |
| /* pci_cqe_crc |
| * Length include CRC. Indicates the length field includes |
| * the packet's CRC. |
| */ |
| MLXSW_ITEM32(pci, cqe, crc, 0x0C, 8, 1); |
| |
| /* pci_cqe_e |
| * CQE with Error. |
| */ |
| MLXSW_ITEM32(pci, cqe, e, 0x0C, 7, 1); |
| |
| /* pci_cqe_sr |
| * 1 - Send Queue |
| * 0 - Receive Queue |
| */ |
| MLXSW_ITEM32(pci, cqe, sr, 0x0C, 6, 1); |
| |
| /* pci_cqe_dqn |
| * Descriptor Queue (DQ) Number. |
| */ |
| MLXSW_ITEM32(pci, cqe, dqn, 0x0C, 1, 5); |
| |
| /* pci_cqe_owner |
| * Ownership bit. |
| */ |
| MLXSW_ITEM32(pci, cqe, owner, 0x0C, 0, 1); |
| |
| /* pci_eqe_event_type |
| * Event type. |
| */ |
| MLXSW_ITEM32(pci, eqe, event_type, 0x0C, 24, 8); |
| #define MLXSW_PCI_EQE_EVENT_TYPE_COMP 0x00 |
| #define MLXSW_PCI_EQE_EVENT_TYPE_CMD 0x0A |
| |
| /* pci_eqe_event_sub_type |
| * Event type. |
| */ |
| MLXSW_ITEM32(pci, eqe, event_sub_type, 0x0C, 16, 8); |
| |
| /* pci_eqe_cqn |
| * Completion Queue that triggeret this EQE. |
| */ |
| MLXSW_ITEM32(pci, eqe, cqn, 0x0C, 8, 7); |
| |
| /* pci_eqe_owner |
| * Ownership bit. |
| */ |
| MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1); |
| |
| /* pci_eqe_cmd_token |
| * Command completion event - token |
| */ |
| MLXSW_ITEM32(pci, eqe, cmd_token, 0x08, 16, 16); |
| |
| /* pci_eqe_cmd_status |
| * Command completion event - status |
| */ |
| MLXSW_ITEM32(pci, eqe, cmd_status, 0x08, 0, 8); |
| |
| /* pci_eqe_cmd_out_param_h |
| * Command completion event - output parameter - higher part |
| */ |
| MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x0C, 0, 32); |
| |
| /* pci_eqe_cmd_out_param_l |
| * Command completion event - output parameter - lower part |
| */ |
| MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x10, 0, 32); |
| |
| #endif |