| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/gfp.h> |
| #include <linux/sched.h> |
| |
| #include "wlcore.h" |
| #include "debug.h" |
| #include "acx.h" |
| #include "rx.h" |
| #include "tx.h" |
| #include "io.h" |
| #include "hw_ops.h" |
| |
| /* |
| * TODO: this is here just for now, it must be removed when the data |
| * operations are in place. |
| */ |
| #include "../wl12xx/reg.h" |
| |
| static u32 wlcore_rx_get_buf_size(struct wl1271 *wl, |
| u32 rx_pkt_desc) |
| { |
| if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN) |
| return (rx_pkt_desc & ALIGNED_RX_BUF_SIZE_MASK) >> |
| ALIGNED_RX_BUF_SIZE_SHIFT; |
| |
| return (rx_pkt_desc & RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV; |
| } |
| |
| static u32 wlcore_rx_get_align_buf_size(struct wl1271 *wl, u32 pkt_len) |
| { |
| if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN) |
| return ALIGN(pkt_len, WL12XX_BUS_BLOCK_SIZE); |
| |
| return pkt_len; |
| } |
| |
| static void wl1271_rx_status(struct wl1271 *wl, |
| struct wl1271_rx_descriptor *desc, |
| struct ieee80211_rx_status *status, |
| u8 beacon) |
| { |
| memset(status, 0, sizeof(struct ieee80211_rx_status)); |
| |
| if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG) |
| status->band = IEEE80211_BAND_2GHZ; |
| else |
| status->band = IEEE80211_BAND_5GHZ; |
| |
| status->rate_idx = wlcore_rate_to_idx(wl, desc->rate, status->band); |
| |
| /* 11n support */ |
| if (desc->rate <= wl->hw_min_ht_rate) |
| status->flag |= RX_FLAG_HT; |
| |
| /* |
| * Read the signal level and antenna diversity indication. |
| * The msb in the signal level is always set as it is a |
| * negative number. |
| * The antenna indication is the msb of the rssi. |
| */ |
| status->signal = ((desc->rssi & RSSI_LEVEL_BITMASK) | BIT(7)); |
| status->antenna = ((desc->rssi & ANT_DIVERSITY_BITMASK) >> 7); |
| |
| /* |
| * FIXME: In wl1251, the SNR should be divided by two. In wl1271 we |
| * need to divide by two for now, but TI has been discussing about |
| * changing it. This needs to be rechecked. |
| */ |
| wl->noise = desc->rssi - (desc->snr >> 1); |
| |
| status->freq = ieee80211_channel_to_frequency(desc->channel, |
| status->band); |
| |
| if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) { |
| u8 desc_err_code = desc->status & WL1271_RX_DESC_STATUS_MASK; |
| |
| status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED | |
| RX_FLAG_DECRYPTED; |
| |
| if (unlikely(desc_err_code & WL1271_RX_DESC_MIC_FAIL)) { |
| status->flag |= RX_FLAG_MMIC_ERROR; |
| wl1271_warning("Michael MIC error. Desc: 0x%x", |
| desc_err_code); |
| } |
| } |
| |
| if (beacon) |
| wlcore_set_pending_regdomain_ch(wl, (u16)desc->channel, |
| status->band); |
| } |
| |
| static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length, |
| enum wl_rx_buf_align rx_align, u8 *hlid) |
| { |
| struct wl1271_rx_descriptor *desc; |
| struct sk_buff *skb; |
| struct ieee80211_hdr *hdr; |
| u8 *buf; |
| u8 beacon = 0; |
| u8 is_data = 0; |
| u8 reserved = 0, offset_to_data = 0; |
| u16 seq_num; |
| u32 pkt_data_len; |
| |
| /* |
| * In PLT mode we seem to get frames and mac80211 warns about them, |
| * workaround this by not retrieving them at all. |
| */ |
| if (unlikely(wl->plt)) |
| return -EINVAL; |
| |
| pkt_data_len = wlcore_hw_get_rx_packet_len(wl, data, length); |
| if (!pkt_data_len) { |
| wl1271_error("Invalid packet arrived from HW. length %d", |
| length); |
| return -EINVAL; |
| } |
| |
| if (rx_align == WLCORE_RX_BUF_UNALIGNED) |
| reserved = RX_BUF_ALIGN; |
| else if (rx_align == WLCORE_RX_BUF_PADDED) |
| offset_to_data = RX_BUF_ALIGN; |
| |
| /* the data read starts with the descriptor */ |
| desc = (struct wl1271_rx_descriptor *) data; |
| |
| if (desc->packet_class == WL12XX_RX_CLASS_LOGGER) { |
| size_t len = length - sizeof(*desc); |
| wl12xx_copy_fwlog(wl, data + sizeof(*desc), len); |
| wake_up_interruptible(&wl->fwlog_waitq); |
| return 0; |
| } |
| |
| /* discard corrupted packets */ |
| if (desc->status & WL1271_RX_DESC_DECRYPT_FAIL) { |
| hdr = (void *)(data + sizeof(*desc) + offset_to_data); |
| wl1271_warning("corrupted packet in RX: status: 0x%x len: %d", |
| desc->status & WL1271_RX_DESC_STATUS_MASK, |
| pkt_data_len); |
| wl1271_dump((DEBUG_RX|DEBUG_CMD), "PKT: ", data + sizeof(*desc), |
| min(pkt_data_len, |
| ieee80211_hdrlen(hdr->frame_control))); |
| return -EINVAL; |
| } |
| |
| /* skb length not including rx descriptor */ |
| skb = __dev_alloc_skb(pkt_data_len + reserved, GFP_KERNEL); |
| if (!skb) { |
| wl1271_error("Couldn't allocate RX frame"); |
| return -ENOMEM; |
| } |
| |
| /* reserve the unaligned payload(if any) */ |
| skb_reserve(skb, reserved); |
| |
| buf = skb_put(skb, pkt_data_len); |
| |
| /* |
| * Copy packets from aggregation buffer to the skbs without rx |
| * descriptor and with packet payload aligned care. In case of unaligned |
| * packets copy the packets in offset of 2 bytes guarantee IP header |
| * payload aligned to 4 bytes. |
| */ |
| memcpy(buf, data + sizeof(*desc), pkt_data_len); |
| if (rx_align == WLCORE_RX_BUF_PADDED) |
| skb_pull(skb, RX_BUF_ALIGN); |
| |
| *hlid = desc->hlid; |
| |
| hdr = (struct ieee80211_hdr *)skb->data; |
| if (ieee80211_is_beacon(hdr->frame_control)) |
| beacon = 1; |
| if (ieee80211_is_data_present(hdr->frame_control)) |
| is_data = 1; |
| |
| wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon); |
| wlcore_hw_set_rx_csum(wl, desc, skb); |
| |
| seq_num = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; |
| wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s seq %d hlid %d", skb, |
| skb->len - desc->pad_len, |
| beacon ? "beacon" : "", |
| seq_num, *hlid); |
| |
| skb_queue_tail(&wl->deferred_rx_queue, skb); |
| queue_work(wl->freezable_wq, &wl->netstack_work); |
| |
| return is_data; |
| } |
| |
| int wlcore_rx(struct wl1271 *wl, struct wl_fw_status *status) |
| { |
| unsigned long active_hlids[BITS_TO_LONGS(WLCORE_MAX_LINKS)] = {0}; |
| u32 buf_size; |
| u32 fw_rx_counter = status->fw_rx_counter % wl->num_rx_desc; |
| u32 drv_rx_counter = wl->rx_counter % wl->num_rx_desc; |
| u32 rx_counter; |
| u32 pkt_len, align_pkt_len; |
| u32 pkt_offset, des; |
| u8 hlid; |
| enum wl_rx_buf_align rx_align; |
| int ret = 0; |
| |
| while (drv_rx_counter != fw_rx_counter) { |
| buf_size = 0; |
| rx_counter = drv_rx_counter; |
| while (rx_counter != fw_rx_counter) { |
| des = le32_to_cpu(status->rx_pkt_descs[rx_counter]); |
| pkt_len = wlcore_rx_get_buf_size(wl, des); |
| align_pkt_len = wlcore_rx_get_align_buf_size(wl, |
| pkt_len); |
| if (buf_size + align_pkt_len > wl->aggr_buf_size) |
| break; |
| buf_size += align_pkt_len; |
| rx_counter++; |
| rx_counter %= wl->num_rx_desc; |
| } |
| |
| if (buf_size == 0) { |
| wl1271_warning("received empty data"); |
| break; |
| } |
| |
| /* Read all available packets at once */ |
| des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]); |
| ret = wlcore_hw_prepare_read(wl, des, buf_size); |
| if (ret < 0) |
| goto out; |
| |
| ret = wlcore_read_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf, |
| buf_size, true); |
| if (ret < 0) |
| goto out; |
| |
| /* Split data into separate packets */ |
| pkt_offset = 0; |
| while (pkt_offset < buf_size) { |
| des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]); |
| pkt_len = wlcore_rx_get_buf_size(wl, des); |
| rx_align = wlcore_hw_get_rx_buf_align(wl, des); |
| |
| /* |
| * the handle data call can only fail in memory-outage |
| * conditions, in that case the received frame will just |
| * be dropped. |
| */ |
| if (wl1271_rx_handle_data(wl, |
| wl->aggr_buf + pkt_offset, |
| pkt_len, rx_align, |
| &hlid) == 1) { |
| if (hlid < wl->num_links) |
| __set_bit(hlid, active_hlids); |
| else |
| WARN(1, |
| "hlid (%d) exceeded MAX_LINKS\n", |
| hlid); |
| } |
| |
| wl->rx_counter++; |
| drv_rx_counter++; |
| drv_rx_counter %= wl->num_rx_desc; |
| pkt_offset += wlcore_rx_get_align_buf_size(wl, pkt_len); |
| } |
| } |
| |
| /* |
| * Write the driver's packet counter to the FW. This is only required |
| * for older hardware revisions |
| */ |
| if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION) { |
| ret = wlcore_write32(wl, WL12XX_REG_RX_DRIVER_COUNTER, |
| wl->rx_counter); |
| if (ret < 0) |
| goto out; |
| } |
| |
| wl12xx_rearm_rx_streaming(wl, active_hlids); |
| |
| out: |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| int wl1271_rx_filter_enable(struct wl1271 *wl, |
| int index, bool enable, |
| struct wl12xx_rx_filter *filter) |
| { |
| int ret; |
| |
| if (!!test_bit(index, wl->rx_filter_enabled) == enable) { |
| wl1271_warning("Request to enable an already " |
| "enabled rx filter %d", index); |
| return 0; |
| } |
| |
| ret = wl1271_acx_set_rx_filter(wl, index, enable, filter); |
| |
| if (ret) { |
| wl1271_error("Failed to %s rx data filter %d (err=%d)", |
| enable ? "enable" : "disable", index, ret); |
| return ret; |
| } |
| |
| if (enable) |
| __set_bit(index, wl->rx_filter_enabled); |
| else |
| __clear_bit(index, wl->rx_filter_enabled); |
| |
| return 0; |
| } |
| |
| int wl1271_rx_filter_clear_all(struct wl1271 *wl) |
| { |
| int i, ret = 0; |
| |
| for (i = 0; i < WL1271_MAX_RX_FILTERS; i++) { |
| if (!test_bit(i, wl->rx_filter_enabled)) |
| continue; |
| ret = wl1271_rx_filter_enable(wl, i, 0, NULL); |
| if (ret) |
| goto out; |
| } |
| |
| out: |
| return ret; |
| } |
| #endif /* CONFIG_PM */ |