| menuconfig FSL_SOC_BOOKE |
| bool "Freescale Book-E Machine Type" |
| depends on PPC_85xx || PPC_BOOK3E |
| select FSL_SOC |
| select PPC_UDBG_16550 |
| select MPIC |
| select PPC_PCI_CHOICE |
| select FSL_PCI if PCI |
| select SERIAL_8250_SHARE_IRQ if SERIAL_8250 |
| default y |
| |
| if FSL_SOC_BOOKE |
| |
| if PPC32 |
| |
| config MPC8540_ADS |
| bool "Freescale MPC8540 ADS" |
| select DEFAULT_UIMAGE |
| help |
| This option enables support for the MPC 8540 ADS board |
| |
| config MPC8560_ADS |
| bool "Freescale MPC8560 ADS" |
| select DEFAULT_UIMAGE |
| select CPM2 |
| help |
| This option enables support for the MPC 8560 ADS board |
| |
| config MPC85xx_CDS |
| bool "Freescale MPC85xx CDS" |
| select DEFAULT_UIMAGE |
| select PPC_I8259 |
| help |
| This option enables support for the MPC85xx CDS board |
| |
| config MPC85xx_MDS |
| bool "Freescale MPC85xx MDS" |
| select DEFAULT_UIMAGE |
| select PHYLIB |
| select HAS_RAPIDIO |
| select SWIOTLB |
| help |
| This option enables support for the MPC85xx MDS board |
| |
| config MPC8536_DS |
| bool "Freescale MPC8536 DS" |
| select DEFAULT_UIMAGE |
| select SWIOTLB |
| help |
| This option enables support for the MPC8536 DS board |
| |
| config MPC85xx_DS |
| bool "Freescale MPC85xx DS" |
| select PPC_I8259 |
| select DEFAULT_UIMAGE |
| select FSL_ULI1575 if PCI |
| select SWIOTLB |
| help |
| This option enables support for the MPC85xx DS (MPC8544 DS) board |
| |
| config MPC85xx_RDB |
| bool "Freescale MPC85xx RDB" |
| select PPC_I8259 |
| select DEFAULT_UIMAGE |
| select FSL_ULI1575 if PCI |
| select SWIOTLB |
| help |
| This option enables support for the MPC85xx RDB (P2020 RDB) board |
| |
| config P1010_RDB |
| bool "Freescale P1010RDB" |
| select DEFAULT_UIMAGE |
| help |
| This option enables support for the MPC85xx RDB (P1010 RDB) board |
| |
| P1010RDB contains P1010Si, which provides CPU performance up to 800 |
| MHz and 1600 DMIPS, additional functionality and faster interfaces |
| (DDR3/3L, SATA II, and PCI Express). |
| |
| config P1022_DS |
| bool "Freescale P1022 DS" |
| select DEFAULT_UIMAGE |
| select CONFIG_PHYS_64BIT # The DTS has 36-bit addresses |
| select SWIOTLB |
| help |
| This option enables support for the Freescale P1022DS reference board. |
| |
| config P1023_RDS |
| bool "Freescale P1023 RDS" |
| select DEFAULT_UIMAGE |
| help |
| This option enables support for the P1023 RDS board |
| |
| config SOCRATES |
| bool "Socrates" |
| select DEFAULT_UIMAGE |
| help |
| This option enables support for the Socrates board. |
| |
| config KSI8560 |
| bool "Emerson KSI8560" |
| select DEFAULT_UIMAGE |
| help |
| This option enables support for the Emerson KSI8560 board |
| |
| config XES_MPC85xx |
| bool "X-ES single-board computer" |
| select DEFAULT_UIMAGE |
| help |
| This option enables support for the various single-board |
| computers from Extreme Engineering Solutions (X-ES) based on |
| Freescale MPC85xx processors. |
| Manufacturer: Extreme Engineering Solutions, Inc. |
| URL: <http://www.xes-inc.com/> |
| |
| config STX_GP3 |
| bool "Silicon Turnkey Express GP3" |
| help |
| This option enables support for the Silicon Turnkey Express GP3 |
| board. |
| select CPM2 |
| select DEFAULT_UIMAGE |
| |
| config TQM8540 |
| bool "TQ Components TQM8540" |
| help |
| This option enables support for the TQ Components TQM8540 board. |
| select DEFAULT_UIMAGE |
| select TQM85xx |
| |
| config TQM8541 |
| bool "TQ Components TQM8541" |
| help |
| This option enables support for the TQ Components TQM8541 board. |
| select DEFAULT_UIMAGE |
| select TQM85xx |
| select CPM2 |
| |
| config TQM8548 |
| bool "TQ Components TQM8548" |
| help |
| This option enables support for the TQ Components TQM8548 board. |
| select DEFAULT_UIMAGE |
| select TQM85xx |
| |
| config TQM8555 |
| bool "TQ Components TQM8555" |
| help |
| This option enables support for the TQ Components TQM8555 board. |
| select DEFAULT_UIMAGE |
| select TQM85xx |
| select CPM2 |
| |
| config TQM8560 |
| bool "TQ Components TQM8560" |
| help |
| This option enables support for the TQ Components TQM8560 board. |
| select DEFAULT_UIMAGE |
| select TQM85xx |
| select CPM2 |
| |
| config SBC8548 |
| bool "Wind River SBC8548" |
| select DEFAULT_UIMAGE |
| help |
| This option enables support for the Wind River SBC8548 board |
| |
| config SBC8560 |
| bool "Wind River SBC8560" |
| select DEFAULT_UIMAGE |
| help |
| This option enables support for the Wind River SBC8560 board |
| |
| config P2040_RDB |
| bool "Freescale P2040 RDB" |
| select DEFAULT_UIMAGE |
| select PPC_E500MC |
| select PHYS_64BIT |
| select SWIOTLB |
| select ARCH_REQUIRE_GPIOLIB |
| select GPIO_MPC8XXX |
| select HAS_RAPIDIO |
| select PPC_EPAPR_HV_PIC |
| help |
| This option enables support for the P2040 RDB board |
| |
| config P3041_DS |
| bool "Freescale P3041 DS" |
| select DEFAULT_UIMAGE |
| select PPC_E500MC |
| select PHYS_64BIT |
| select SWIOTLB |
| select ARCH_REQUIRE_GPIOLIB |
| select GPIO_MPC8XXX |
| select HAS_RAPIDIO |
| select PPC_EPAPR_HV_PIC |
| help |
| This option enables support for the P3041 DS board |
| |
| config P4080_DS |
| bool "Freescale P4080 DS" |
| select DEFAULT_UIMAGE |
| select PPC_E500MC |
| select PHYS_64BIT |
| select SWIOTLB |
| select ARCH_REQUIRE_GPIOLIB |
| select GPIO_MPC8XXX |
| select HAS_RAPIDIO |
| select PPC_EPAPR_HV_PIC |
| help |
| This option enables support for the P4080 DS board |
| |
| endif # PPC32 |
| |
| config P5020_DS |
| bool "Freescale P5020 DS" |
| select DEFAULT_UIMAGE |
| select E500 |
| select PPC_E500MC |
| select PHYS_64BIT |
| select SWIOTLB |
| select ARCH_REQUIRE_GPIOLIB |
| select GPIO_MPC8XXX |
| select HAS_RAPIDIO |
| select PPC_EPAPR_HV_PIC |
| help |
| This option enables support for the P5020 DS board |
| |
| endif # FSL_SOC_BOOKE |
| |
| config TQM85xx |
| bool |
