| /* |
| * SPEAr platform SPI chipselect abstraction over gpiolib |
| * |
| * Copyright (C) 2012 ST Microelectronics |
| * Shiraz Hashim <shiraz.linux.kernel@gmail.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/types.h> |
| |
| /* maximum chipselects */ |
| #define NUM_OF_GPIO 4 |
| |
| /* |
| * Provision is available on some SPEAr SoCs to control ARM PL022 spi cs |
| * through system registers. This register lies outside spi (pl022) |
| * address space into system registers. |
| * |
| * It provides control for spi chip select lines so that any chipselect |
| * (out of 4 possible chipselects in pl022) can be made low to select |
| * the particular slave. |
| */ |
| |
| /** |
| * struct spear_spics - represents spi chip select control |
| * @base: base address |
| * @perip_cfg: configuration register |
| * @sw_enable_bit: bit to enable s/w control over chipselects |
| * @cs_value_bit: bit to program high or low chipselect |
| * @cs_enable_mask: mask to select bits required to select chipselect |
| * @cs_enable_shift: bit pos of cs_enable_mask |
| * @use_count: use count of a spi controller cs lines |
| * @last_off: stores last offset caller of set_value() |
| * @chip: gpio_chip abstraction |
| */ |
| struct spear_spics { |
| void __iomem *base; |
| u32 perip_cfg; |
| u32 sw_enable_bit; |
| u32 cs_value_bit; |
| u32 cs_enable_mask; |
| u32 cs_enable_shift; |
| unsigned long use_count; |
| int last_off; |
| struct gpio_chip chip; |
| }; |
| |
| /* gpio framework specific routines */ |
| static int spics_get_value(struct gpio_chip *chip, unsigned offset) |
| { |
| return -ENXIO; |
| } |
| |
| static void spics_set_value(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct spear_spics *spics = gpiochip_get_data(chip); |
| u32 tmp; |
| |
| /* select chip select from register */ |
| tmp = readl_relaxed(spics->base + spics->perip_cfg); |
| if (spics->last_off != offset) { |
| spics->last_off = offset; |
| tmp &= ~(spics->cs_enable_mask << spics->cs_enable_shift); |
| tmp |= offset << spics->cs_enable_shift; |
| } |
| |
| /* toggle chip select line */ |
| tmp &= ~(0x1 << spics->cs_value_bit); |
| tmp |= value << spics->cs_value_bit; |
| writel_relaxed(tmp, spics->base + spics->perip_cfg); |
| } |
| |
| static int spics_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| return -ENXIO; |
| } |
| |
| static int spics_direction_output(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| spics_set_value(chip, offset, value); |
| return 0; |
| } |
| |
| static int spics_request(struct gpio_chip *chip, unsigned offset) |
| { |
| struct spear_spics *spics = gpiochip_get_data(chip); |
| u32 tmp; |
| |
| if (!spics->use_count++) { |
| tmp = readl_relaxed(spics->base + spics->perip_cfg); |
| tmp |= 0x1 << spics->sw_enable_bit; |
| tmp |= 0x1 << spics->cs_value_bit; |
| writel_relaxed(tmp, spics->base + spics->perip_cfg); |
| } |
| |
| return 0; |
| } |
| |
| static void spics_free(struct gpio_chip *chip, unsigned offset) |
| { |
| struct spear_spics *spics = gpiochip_get_data(chip); |
| u32 tmp; |
| |
| if (!--spics->use_count) { |
| tmp = readl_relaxed(spics->base + spics->perip_cfg); |
| tmp &= ~(0x1 << spics->sw_enable_bit); |
| writel_relaxed(tmp, spics->base + spics->perip_cfg); |
| } |
| } |
| |
| static int spics_gpio_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct spear_spics *spics; |
| int ret; |
| |
| spics = devm_kzalloc(&pdev->dev, sizeof(*spics), GFP_KERNEL); |
| if (!spics) |
| return -ENOMEM; |
| |
| spics->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(spics->base)) |
| return PTR_ERR(spics->base); |
| |
| if (of_property_read_u32(np, "st-spics,peripcfg-reg", |
| &spics->perip_cfg)) |
| goto err_dt_data; |
| if (of_property_read_u32(np, "st-spics,sw-enable-bit", |
| &spics->sw_enable_bit)) |
| goto err_dt_data; |
| if (of_property_read_u32(np, "st-spics,cs-value-bit", |
| &spics->cs_value_bit)) |
| goto err_dt_data; |
| if (of_property_read_u32(np, "st-spics,cs-enable-mask", |
| &spics->cs_enable_mask)) |
| goto err_dt_data; |
| if (of_property_read_u32(np, "st-spics,cs-enable-shift", |
| &spics->cs_enable_shift)) |
| goto err_dt_data; |
| |
| platform_set_drvdata(pdev, spics); |
| |
| spics->chip.ngpio = NUM_OF_GPIO; |
| spics->chip.base = -1; |
| spics->chip.request = spics_request; |
| spics->chip.free = spics_free; |
| spics->chip.direction_input = spics_direction_input; |
| spics->chip.direction_output = spics_direction_output; |
| spics->chip.get = spics_get_value; |
| spics->chip.set = spics_set_value; |
| spics->chip.label = dev_name(&pdev->dev); |
| spics->chip.parent = &pdev->dev; |
| spics->chip.owner = THIS_MODULE; |
| spics->last_off = -1; |
| |
| ret = devm_gpiochip_add_data(&pdev->dev, &spics->chip, spics); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to add gpio chip\n"); |
| return ret; |
| } |
| |
| dev_info(&pdev->dev, "spear spics registered\n"); |
| return 0; |
| |
| err_dt_data: |
| dev_err(&pdev->dev, "DT probe failed\n"); |
| return -EINVAL; |
| } |
| |
| static const struct of_device_id spics_gpio_of_match[] = { |
| { .compatible = "st,spear-spics-gpio" }, |
| {} |
| }; |
| |
| static struct platform_driver spics_gpio_driver = { |
| .probe = spics_gpio_probe, |
| .driver = { |
| .name = "spear-spics-gpio", |
| .of_match_table = spics_gpio_of_match, |
| }, |
| }; |
| |
| static int __init spics_gpio_init(void) |
| { |
| return platform_driver_register(&spics_gpio_driver); |
| } |
| subsys_initcall(spics_gpio_init); |