| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * PCI-E support for CNS3xxx |
| * |
| * Copyright 2008 Cavium Networks |
| * Richard Liu <richard.liu@caviumnetworks.com> |
| * Copyright 2010 MontaVista Software, LLC. |
| * Anton Vorontsov <avorontsov@mvista.com> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/bug.h> |
| #include <linux/pci.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/ptrace.h> |
| #include <asm/mach/map.h> |
| #include "cns3xxx.h" |
| #include "core.h" |
| |
| struct cns3xxx_pcie { |
| void __iomem *host_regs; /* PCI config registers for host bridge */ |
| void __iomem *cfg0_regs; /* PCI Type 0 config registers */ |
| void __iomem *cfg1_regs; /* PCI Type 1 config registers */ |
| unsigned int irqs[2]; |
| struct resource res_io; |
| struct resource res_mem; |
| int port; |
| bool linked; |
| }; |
| |
| static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) |
| { |
| struct pci_sys_data *root = sysdata; |
| |
| return root->private_data; |
| } |
| |
| static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) |
| { |
| return sysdata_to_cnspci(dev->sysdata); |
| } |
| |
| static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus) |
| { |
| return sysdata_to_cnspci(bus->sysdata); |
| } |
| |
| static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus, |
| unsigned int devfn, int where) |
| { |
| struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus); |
| int busno = bus->number; |
| int slot = PCI_SLOT(devfn); |
| void __iomem *base; |
| |
| /* If there is no link, just show the CNS PCI bridge. */ |
| if (!cnspci->linked && busno > 0) |
| return NULL; |
| |
| /* |
| * The CNS PCI bridge doesn't fit into the PCI hierarchy, though |
| * we still want to access it. |
| * We place the host bridge on bus 0, and the directly connected |
| * device on bus 1, slot 0. |
| */ |
| if (busno == 0) { /* internal PCIe bus, host bridge device */ |
| if (devfn == 0) /* device# and function# are ignored by hw */ |
| base = cnspci->host_regs; |
| else |
| return NULL; /* no such device */ |
| |
| } else if (busno == 1) { /* directly connected PCIe device */ |
| if (slot == 0) /* device# is ignored by hw */ |
| base = cnspci->cfg0_regs; |
| else |
| return NULL; /* no such device */ |
| } else /* remote PCI bus */ |
| base = cnspci->cfg1_regs + ((busno & 0xf) << 20); |
| |
| return base + where + (devfn << 12); |
| } |
| |
| static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| int ret; |
| u32 mask = (0x1ull << (size * 8)) - 1; |
| int shift = (where % 4) * 8; |
| |
| ret = pci_generic_config_read(bus, devfn, where, size, val); |
| |
| if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn && |
| (where & 0xffc) == PCI_CLASS_REVISION) |
| /* |
| * RC's class is 0xb, but Linux PCI driver needs 0x604 |
| * for a PCIe bridge. So we must fixup the class code |
| * to 0x604 here. |
| */ |
| *val = ((((*val << shift) & 0xff) | (0x604 << 16)) >> shift) & mask; |
| |
| return ret; |
| } |
| |
| static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys) |
| { |
| struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys); |
| struct resource *res_io = &cnspci->res_io; |
| struct resource *res_mem = &cnspci->res_mem; |
| |
| BUG_ON(request_resource(&iomem_resource, res_io) || |
| request_resource(&iomem_resource, res_mem)); |
| |
| pci_add_resource_offset(&sys->resources, res_io, sys->io_offset); |
| pci_add_resource_offset(&sys->resources, res_mem, sys->mem_offset); |
| |
| return 1; |
| } |
| |
| static struct pci_ops cns3xxx_pcie_ops = { |
| .map_bus = cns3xxx_pci_map_bus, |
| .read = cns3xxx_pci_read_config, |
| .write = pci_generic_config_write, |
| }; |
| |
| static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev); |
| int irq = cnspci->irqs[!!dev->bus->number]; |
| |
| pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n", |
| pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn), |
| PCI_FUNC(dev->devfn), slot, pin, irq); |
| |
| return irq; |
| } |
| |
| static struct cns3xxx_pcie cns3xxx_pcie[] = { |
| [0] = { |
| .host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT, |
| .cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT, |
| .cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT, |
| .res_io = { |
| .name = "PCIe0 I/O space", |
| .start = CNS3XXX_PCIE0_IO_BASE, |
| .end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */ |
| .flags = IORESOURCE_IO, |
| }, |
| .res_mem = { |
| .name = "PCIe0 non-prefetchable", |
| .start = CNS3XXX_PCIE0_MEM_BASE, |
| .end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */ |
| .flags = IORESOURCE_MEM, |
| }, |
| .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, }, |
| .port = 0, |
| }, |
| [1] = { |
| .host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT, |
| .cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT, |
| .cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT, |
| .res_io = { |
| .name = "PCIe1 I/O space", |
| .start = CNS3XXX_PCIE1_IO_BASE, |
| .end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */ |
| .flags = IORESOURCE_IO, |
| }, |
| .res_mem = { |
| .name = "PCIe1 non-prefetchable", |
| .start = CNS3XXX_PCIE1_MEM_BASE, |
| .end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */ |
| .flags = IORESOURCE_MEM, |
| }, |
| .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, }, |
| .port = 1, |
| }, |
| }; |
| |
| static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci) |
| { |
| int port = cnspci->port; |
| u32 reg; |
| unsigned long time; |
| |
| reg = __raw_readl(MISC_PCIE_CTRL(port)); |
| /* |
| * Enable Application Request to 1, it will exit L1 automatically, |
| * but when chip back, it will use another clock, still can use 0x1. |
| */ |
| reg |= 0x3; |
| __raw_writel(reg, MISC_PCIE_CTRL(port)); |
| |
| pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port); |
| pr_info("PCIe: Port[%d] Check data link layer...", port); |
| |
| time = jiffies; |
| while (1) { |
| reg = __raw_readl(MISC_PCIE_PM_DEBUG(port)); |
| if (reg & 0x1) { |
| pr_info("Link up.\n"); |
| cnspci->linked = 1; |
| break; |
| } else if (time_after(jiffies, time + 50)) { |
| pr_info("Device not found.\n"); |
| break; |
| } |
| } |
| } |
| |
| static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci, |
| int where, int size, u32 val) |
| { |
| void __iomem *base = cnspci->host_regs + (where & 0xffc); |
| u32 v; |
| u32 mask = (0x1ull << (size * 8)) - 1; |
| int shift = (where % 4) * 8; |
| |
| v = readl_relaxed(base); |
| |
| v &= ~(mask << shift); |
| v |= (val & mask) << shift; |
| |
| writel_relaxed(v, base); |
| readl_relaxed(base); |
| } |
| |
| static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) |
| { |
| u16 mem_base = cnspci->res_mem.start >> 16; |
| u16 mem_limit = cnspci->res_mem.end >> 16; |
| u16 io_base = cnspci->res_io.start >> 16; |
| u16 io_limit = cnspci->res_io.end >> 16; |
| |
| cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0); |
| cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1); |
| cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1); |
| cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base); |
| cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit); |
| cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base); |
| cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit); |
| |
| if (!cnspci->linked) |
| return; |
| |
| /* Set Device Max_Read_Request_Size to 128 byte */ |
| pcie_bus_config = PCIE_BUS_PEER2PEER; |
| |
| /* Disable PCIe0 Interrupt Mask INTA to INTD */ |
| __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port)); |
| } |
| |
| static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr, |
| struct pt_regs *regs) |
| { |
| if (fsr & (1 << 10)) |
| regs->ARM_pc += 4; |
| return 0; |
| } |
| |
| void __init cns3xxx_pcie_init_late(void) |
| { |
| int i; |
| void *private_data; |
| struct hw_pci hw_pci = { |
| .nr_controllers = 1, |
| .ops = &cns3xxx_pcie_ops, |
| .setup = cns3xxx_pci_setup, |
| .map_irq = cns3xxx_pcie_map_irq, |
| .private_data = &private_data, |
| }; |
| |
| pcibios_min_io = 0; |
| pcibios_min_mem = 0; |
| |
| hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0, |
| "imprecise external abort"); |
| |
| for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { |
| cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i)); |
| cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i)); |
| cns3xxx_pcie_check_link(&cns3xxx_pcie[i]); |
| cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]); |
| private_data = &cns3xxx_pcie[i]; |
| pci_common_init(&hw_pci); |
| } |
| |
| pci_assign_unassigned_resources(); |
| } |