| /* Include in trace.c */ |
| |
| #include <linux/kthread.h> |
| #include <linux/delay.h> |
| |
| static inline int trace_valid_entry(struct trace_entry *entry) |
| { |
| switch (entry->type) { |
| case TRACE_FN: |
| case TRACE_CTX: |
| case TRACE_WAKE: |
| case TRACE_CONT: |
| case TRACE_STACK: |
| case TRACE_PRINT: |
| case TRACE_SPECIAL: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int trace_test_buffer_cpu(struct trace_array *tr, int cpu) |
| { |
| struct ring_buffer_event *event; |
| struct trace_entry *entry; |
| |
| while ((event = ring_buffer_consume(tr->buffer, cpu, NULL))) { |
| entry = ring_buffer_event_data(event); |
| |
| if (!trace_valid_entry(entry)) { |
| printk(KERN_CONT ".. invalid entry %d ", |
| entry->type); |
| goto failed; |
| } |
| } |
| return 0; |
| |
| failed: |
| /* disable tracing */ |
| tracing_disabled = 1; |
| printk(KERN_CONT ".. corrupted trace buffer .. "); |
| return -1; |
| } |
| |
| /* |
| * Test the trace buffer to see if all the elements |
| * are still sane. |
| */ |
| static int trace_test_buffer(struct trace_array *tr, unsigned long *count) |
| { |
| unsigned long flags, cnt = 0; |
| int cpu, ret = 0; |
| |
| /* Don't allow flipping of max traces now */ |
| raw_local_irq_save(flags); |
| __raw_spin_lock(&ftrace_max_lock); |
| |
| cnt = ring_buffer_entries(tr->buffer); |
| |
| for_each_possible_cpu(cpu) { |
| ret = trace_test_buffer_cpu(tr, cpu); |
| if (ret) |
| break; |
| } |
| __raw_spin_unlock(&ftrace_max_lock); |
| raw_local_irq_restore(flags); |
| |
| if (count) |
| *count = cnt; |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_FUNCTION_TRACER |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| |
| #define __STR(x) #x |
| #define STR(x) __STR(x) |
| |
| /* Test dynamic code modification and ftrace filters */ |
| int trace_selftest_startup_dynamic_tracing(struct tracer *trace, |
| struct trace_array *tr, |
| int (*func)(void)) |
| { |
| int save_ftrace_enabled = ftrace_enabled; |
| int save_tracer_enabled = tracer_enabled; |
| unsigned long count; |
| char *func_name; |
| int ret; |
| |
| /* The ftrace test PASSED */ |
| printk(KERN_CONT "PASSED\n"); |
| pr_info("Testing dynamic ftrace: "); |
| |
| /* enable tracing, and record the filter function */ |
| ftrace_enabled = 1; |
| tracer_enabled = 1; |
| |
| /* passed in by parameter to fool gcc from optimizing */ |
| func(); |
| |
| /* |
| * Some archs *cough*PowerPC*cough* add charachters to the |
| * start of the function names. We simply put a '*' to |
| * accomodate them. |
| */ |
| func_name = "*" STR(DYN_FTRACE_TEST_NAME); |
| |
| /* filter only on our function */ |
| ftrace_set_filter(func_name, strlen(func_name), 1); |
| |
| /* enable tracing */ |
| trace->init(tr); |
| |
| /* Sleep for a 1/10 of a second */ |
| msleep(100); |
| |
| /* we should have nothing in the buffer */ |
| ret = trace_test_buffer(tr, &count); |
| if (ret) |
| goto out; |
| |
| if (count) { |
| ret = -1; |
| printk(KERN_CONT ".. filter did not filter .. "); |
| goto out; |
| } |
| |
| /* call our function again */ |
| func(); |
| |
| /* sleep again */ |
| msleep(100); |
| |
| /* stop the tracing. */ |
| tracing_stop(); |
| ftrace_enabled = 0; |
| |
| /* check the trace buffer */ |
| ret = trace_test_buffer(tr, &count); |
| trace->reset(tr); |
| tracing_start(); |
| |
| /* we should only have one item */ |
| if (!ret && count != 1) { |
| printk(KERN_CONT ".. filter failed count=%ld ..", count); |
| ret = -1; |
| goto out; |
| } |
| |
| out: |
| ftrace_enabled = save_ftrace_enabled; |
| tracer_enabled = save_tracer_enabled; |
| |
| /* Enable tracing on all functions again */ |
| ftrace_set_filter(NULL, 0, 1); |
| |
| return ret; |
| } |
| #else |
| # define trace_selftest_startup_dynamic_tracing(trace, tr, func) ({ 0; }) |
| #endif /* CONFIG_DYNAMIC_FTRACE */ |
| /* |
| * Simple verification test of ftrace function tracer. |
| * Enable ftrace, sleep 1/10 second, and then read the trace |
| * buffer to see if all is in order. |
| */ |
| int |
| trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) |
| { |
| int save_ftrace_enabled = ftrace_enabled; |
| int save_tracer_enabled = tracer_enabled; |
| unsigned long count; |
| int ret; |
| |
| /* make sure msleep has been recorded */ |
| msleep(1); |
| |
| /* start the tracing */ |
| ftrace_enabled = 1; |
| tracer_enabled = 1; |
| |
| trace->init(tr); |
| /* Sleep for a 1/10 of a second */ |
| msleep(100); |
| /* stop the tracing. */ |
| tracing_stop(); |
| ftrace_enabled = 0; |
| |
| /* check the trace buffer */ |
| ret = trace_test_buffer(tr, &count); |
| trace->reset(tr); |
| tracing_start(); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| goto out; |
| } |
| |
| ret = trace_selftest_startup_dynamic_tracing(trace, tr, |
| DYN_FTRACE_TEST_NAME); |
| |
| out: |
| ftrace_enabled = save_ftrace_enabled; |
| tracer_enabled = save_tracer_enabled; |
| |
| /* kill ftrace totally if we failed */ |
| if (ret) |
| ftrace_kill(); |
| |
| return ret; |
| } |
| #endif /* CONFIG_FUNCTION_TRACER */ |
| |
| #ifdef CONFIG_IRQSOFF_TRACER |
| int |
| trace_selftest_startup_irqsoff(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long save_max = tracing_max_latency; |
| unsigned long count; |
| int ret; |
| |
| /* start the tracing */ |
| trace->init(tr); |
| /* reset the max latency */ |
| tracing_max_latency = 0; |
| /* disable interrupts for a bit */ |
| local_irq_disable(); |
| udelay(100); |
| local_irq_enable(); |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(tr, NULL); |
| if (!ret) |
| ret = trace_test_buffer(&max_tr, &count); |
| trace->reset(tr); |
| tracing_start(); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| } |
| |
| tracing_max_latency = save_max; |
| |
| return ret; |
| } |
| #endif /* CONFIG_IRQSOFF_TRACER */ |
| |
| #ifdef CONFIG_PREEMPT_TRACER |
| int |
| trace_selftest_startup_preemptoff(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long save_max = tracing_max_latency; |
| unsigned long count; |
| int ret; |
| |
| /* start the tracing */ |
| trace->init(tr); |
| /* reset the max latency */ |
| tracing_max_latency = 0; |
| /* disable preemption for a bit */ |
| preempt_disable(); |
| udelay(100); |
| preempt_enable(); |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(tr, NULL); |
| if (!ret) |
| ret = trace_test_buffer(&max_tr, &count); |
| trace->reset(tr); |
| tracing_start(); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| } |
| |
| tracing_max_latency = save_max; |
| |
| return ret; |
| } |
| #endif /* CONFIG_PREEMPT_TRACER */ |
| |
| #if defined(CONFIG_IRQSOFF_TRACER) && defined(CONFIG_PREEMPT_TRACER) |
| int |
| trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long save_max = tracing_max_latency; |
| unsigned long count; |
| int ret; |
| |
| /* start the tracing */ |
| trace->init(tr); |
| |
| /* reset the max latency */ |
| tracing_max_latency = 0; |
| |
| /* disable preemption and interrupts for a bit */ |
| preempt_disable(); |
| local_irq_disable(); |
| udelay(100); |
| preempt_enable(); |
| /* reverse the order of preempt vs irqs */ |
| local_irq_enable(); |
| |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(tr, NULL); |
| if (ret) { |
| tracing_start(); |
| goto out; |
| } |
| |
| ret = trace_test_buffer(&max_tr, &count); |
| if (ret) { |
| tracing_start(); |
| goto out; |
| } |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| tracing_start(); |
| goto out; |
| } |
| |
| /* do the test by disabling interrupts first this time */ |
| tracing_max_latency = 0; |
| tracing_start(); |
| preempt_disable(); |
| local_irq_disable(); |
| udelay(100); |
| preempt_enable(); |
| /* reverse the order of preempt vs irqs */ |
| local_irq_enable(); |
| |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(tr, NULL); |
| if (ret) |
| goto out; |
| |
| ret = trace_test_buffer(&max_tr, &count); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| goto out; |
| } |
| |
| out: |
| trace->reset(tr); |
| tracing_start(); |
| tracing_max_latency = save_max; |
| |
| return ret; |
| } |
| #endif /* CONFIG_IRQSOFF_TRACER && CONFIG_PREEMPT_TRACER */ |
| |
| #ifdef CONFIG_NOP_TRACER |
| int |
| trace_selftest_startup_nop(struct tracer *trace, struct trace_array *tr) |
| { |
| /* What could possibly go wrong? */ |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_SCHED_TRACER |
| static int trace_wakeup_test_thread(void *data) |
| { |
| /* Make this a RT thread, doesn't need to be too high */ |
| struct sched_param param = { .sched_priority = 5 }; |
| struct completion *x = data; |
| |
| sched_setscheduler(current, SCHED_FIFO, ¶m); |
| |
| /* Make it know we have a new prio */ |
| complete(x); |
| |
| /* now go to sleep and let the test wake us up */ |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule(); |
| |
| /* we are awake, now wait to disappear */ |
| while (!kthread_should_stop()) { |
| /* |
| * This is an RT task, do short sleeps to let |
| * others run. |
| */ |
| msleep(100); |
| } |
| |
| return 0; |
| } |
| |
| int |
| trace_selftest_startup_wakeup(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long save_max = tracing_max_latency; |
| struct task_struct *p; |
| struct completion isrt; |
| unsigned long count; |
| int ret; |
| |
| init_completion(&isrt); |
| |
| /* create a high prio thread */ |
| p = kthread_run(trace_wakeup_test_thread, &isrt, "ftrace-test"); |
| if (IS_ERR(p)) { |
| printk(KERN_CONT "Failed to create ftrace wakeup test thread "); |
| return -1; |
| } |
| |
| /* make sure the thread is running at an RT prio */ |
| wait_for_completion(&isrt); |
| |
| /* start the tracing */ |
| trace->init(tr); |
| /* reset the max latency */ |
| tracing_max_latency = 0; |
| |
| /* sleep to let the RT thread sleep too */ |
| msleep(100); |
| |
| /* |
| * Yes this is slightly racy. It is possible that for some |
| * strange reason that the RT thread we created, did not |
| * call schedule for 100ms after doing the completion, |
| * and we do a wakeup on a task that already is awake. |
| * But that is extremely unlikely, and the worst thing that |
| * happens in such a case, is that we disable tracing. |
| * Honestly, if this race does happen something is horrible |
| * wrong with the system. |
| */ |
| |
| wake_up_process(p); |
| |
| /* give a little time to let the thread wake up */ |
| msleep(100); |
| |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(tr, NULL); |
| if (!ret) |
| ret = trace_test_buffer(&max_tr, &count); |
| |
| |
| trace->reset(tr); |
| tracing_start(); |
| |
| tracing_max_latency = save_max; |
| |
| /* kill the thread */ |
| kthread_stop(p); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| } |
| |
| return ret; |
| } |
| #endif /* CONFIG_SCHED_TRACER */ |
| |
| #ifdef CONFIG_CONTEXT_SWITCH_TRACER |
| int |
| trace_selftest_startup_sched_switch(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long count; |
| int ret; |
| |
| /* start the tracing */ |
| trace->init(tr); |
| /* Sleep for a 1/10 of a second */ |
| msleep(100); |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check the trace buffer */ |
| ret = trace_test_buffer(tr, &count); |
| trace->reset(tr); |
| tracing_start(); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| } |
| |
| return ret; |
| } |
| #endif /* CONFIG_CONTEXT_SWITCH_TRACER */ |
| |
| #ifdef CONFIG_SYSPROF_TRACER |
| int |
| trace_selftest_startup_sysprof(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long count; |
| int ret; |
| |
| /* start the tracing */ |
| trace->init(tr); |
| /* Sleep for a 1/10 of a second */ |
| msleep(100); |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check the trace buffer */ |
| ret = trace_test_buffer(tr, &count); |
| trace->reset(tr); |
| tracing_start(); |
| |
| return ret; |
| } |
| #endif /* CONFIG_SYSPROF_TRACER */ |