blob: fee4f0eb466520ed06fad07ac16aee8179741ca9 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SPMI Controller (PMIC Arbiter)
maintainers:
- Stephen Boyd <sboyd@kernel.org>
description: |
The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
controller with wrapping arbitration logic to allow for multiple on-chip
devices to control a single SPMI master.
The PMIC Arbiter can also act as an interrupt controller, providing interrupts
to slave devices.
allOf:
- $ref: spmi.yaml
properties:
compatible:
const: qcom,spmi-pmic-arb
reg:
oneOf:
- items: # V1
- description: core registers
- description: interrupt controller registers
- description: configuration registers
- items: # V2
- description: core registers
- description: tx-channel per virtual slave regosters
- description: rx-channel (called observer) per virtual slave registers
- description: interrupt controller registers
- description: configuration registers
reg-names:
oneOf:
- items:
- const: core
- const: intr
- const: cnfg
- items:
- const: core
- const: chnls
- const: obsrvr
- const: intr
- const: cnfg
interrupts:
maxItems: 1
interrupt-names:
const: periph_irq
interrupt-controller: true
'#address-cells': true
'#interrupt-cells':
const: 4
description: |
cell 1: slave ID for the requested interrupt (0-15)
cell 2: peripheral ID for requested interrupt (0-255)
cell 3: the requested peripheral interrupt (0-7)
cell 4: interrupt flags indicating level-sense information,
as defined in dt-bindings/interrupt-controller/irq.h
'#size-cells': true
qcom,ee:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 5
description: >
indicates the active Execution Environment identifier
qcom,channel:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 5
description: >
which of the PMIC Arb provided channels to use for accesses
required:
- compatible
- reg-names
- qcom,ee
- qcom,channel
unevaluatedProperties: false
examples:
- |
spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
reg = <0xfc4cf000 0x1000>,
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
interrupts = <0 190 0>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};