| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * FPGA Manager Driver for FPGA Management Engine (FME) |
| * |
| * Copyright (C) 2017-2018 Intel Corporation, Inc. |
| * |
| * Authors: |
| * Kang Luwei <luwei.kang@intel.com> |
| * Xiao Guangrong <guangrong.xiao@linux.intel.com> |
| * Wu Hao <hao.wu@intel.com> |
| * Joseph Grecco <joe.grecco@intel.com> |
| * Enno Luebbers <enno.luebbers@intel.com> |
| * Tim Whisonant <tim.whisonant@intel.com> |
| * Ananda Ravuri <ananda.ravuri@intel.com> |
| * Christopher Rauer <christopher.rauer@intel.com> |
| * Henry Mitchel <henry.mitchel@intel.com> |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/module.h> |
| #include <linux/iopoll.h> |
| #include <linux/io-64-nonatomic-lo-hi.h> |
| #include <linux/fpga/fpga-mgr.h> |
| |
| #include "dfl-fme-pr.h" |
| |
| /* FME Partial Reconfiguration Sub Feature Register Set */ |
| #define FME_PR_DFH 0x0 |
| #define FME_PR_CTRL 0x8 |
| #define FME_PR_STS 0x10 |
| #define FME_PR_DATA 0x18 |
| #define FME_PR_ERR 0x20 |
| #define FME_PR_INTFC_ID_L 0xA8 |
| #define FME_PR_INTFC_ID_H 0xB0 |
| |
| /* FME PR Control Register Bitfield */ |
| #define FME_PR_CTRL_PR_RST BIT_ULL(0) /* Reset PR engine */ |
| #define FME_PR_CTRL_PR_RSTACK BIT_ULL(4) /* Ack for PR engine reset */ |
| #define FME_PR_CTRL_PR_RGN_ID GENMASK_ULL(9, 7) /* PR Region ID */ |
| #define FME_PR_CTRL_PR_START BIT_ULL(12) /* Start to request PR service */ |
| #define FME_PR_CTRL_PR_COMPLETE BIT_ULL(13) /* PR data push completion */ |
| |
| /* FME PR Status Register Bitfield */ |
| /* Number of available entries in HW queue inside the PR engine. */ |
| #define FME_PR_STS_PR_CREDIT GENMASK_ULL(8, 0) |
| #define FME_PR_STS_PR_STS BIT_ULL(16) /* PR operation status */ |
| #define FME_PR_STS_PR_STS_IDLE 0 |
| #define FME_PR_STS_PR_CTRLR_STS GENMASK_ULL(22, 20) /* Controller status */ |
| #define FME_PR_STS_PR_HOST_STS GENMASK_ULL(27, 24) /* PR host status */ |
| |
| /* FME PR Data Register Bitfield */ |
| /* PR data from the raw-binary file. */ |
| #define FME_PR_DATA_PR_DATA_RAW GENMASK_ULL(32, 0) |
| |
| /* FME PR Error Register */ |
| /* PR Operation errors detected. */ |
| #define FME_PR_ERR_OPERATION_ERR BIT_ULL(0) |
| /* CRC error detected. */ |
| #define FME_PR_ERR_CRC_ERR BIT_ULL(1) |
| /* Incompatible PR bitstream detected. */ |
| #define FME_PR_ERR_INCOMPATIBLE_BS BIT_ULL(2) |
| /* PR data push protocol violated. */ |
| #define FME_PR_ERR_PROTOCOL_ERR BIT_ULL(3) |
| /* PR data fifo overflow error detected */ |
| #define FME_PR_ERR_FIFO_OVERFLOW BIT_ULL(4) |
| |
| #define PR_WAIT_TIMEOUT 8000000 |
| #define PR_HOST_STATUS_IDLE 0 |
| |
| struct fme_mgr_priv { |
| void __iomem *ioaddr; |
| u64 pr_error; |
| }; |
| |
| static u64 pr_error_to_mgr_status(u64 err) |
| { |
| u64 status = 0; |
| |
| if (err & FME_PR_ERR_OPERATION_ERR) |
| status |= FPGA_MGR_STATUS_OPERATION_ERR; |
| if (err & FME_PR_ERR_CRC_ERR) |
| status |= FPGA_MGR_STATUS_CRC_ERR; |
| if (err & FME_PR_ERR_INCOMPATIBLE_BS) |
| status |= FPGA_MGR_STATUS_INCOMPATIBLE_IMAGE_ERR; |
| if (err & FME_PR_ERR_PROTOCOL_ERR) |
| status |= FPGA_MGR_STATUS_IP_PROTOCOL_ERR; |
| if (err & FME_PR_ERR_FIFO_OVERFLOW) |
| status |= FPGA_MGR_STATUS_FIFO_OVERFLOW_ERR; |
| |
| return status; |
| } |
| |
| static u64 fme_mgr_pr_error_handle(void __iomem *fme_pr) |
| { |
| u64 pr_status, pr_error; |
| |
| pr_status = readq(fme_pr + FME_PR_STS); |
| if (!(pr_status & FME_PR_STS_PR_STS)) |
| return 0; |
| |
| pr_error = readq(fme_pr + FME_PR_ERR); |
| writeq(pr_error, fme_pr + FME_PR_ERR); |
| |
| return pr_error; |
| } |
| |
| static int fme_mgr_write_init(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| const char *buf, size_t count) |
| { |
| struct device *dev = &mgr->dev; |
| struct fme_mgr_priv *priv = mgr->priv; |
| void __iomem *fme_pr = priv->ioaddr; |
| u64 pr_ctrl, pr_status; |
| |
| if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) { |
| dev_err(dev, "only supports partial reconfiguration.\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "resetting PR before initiated PR\n"); |
| |
| pr_ctrl = readq(fme_pr + FME_PR_CTRL); |
| pr_ctrl |= FME_PR_CTRL_PR_RST; |
| writeq(pr_ctrl, fme_pr + FME_PR_CTRL); |
| |
| if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl, |
| pr_ctrl & FME_PR_CTRL_PR_RSTACK, 1, |
| PR_WAIT_TIMEOUT)) { |
| dev_err(dev, "PR Reset ACK timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| pr_ctrl = readq(fme_pr + FME_PR_CTRL); |
| pr_ctrl &= ~FME_PR_CTRL_PR_RST; |
| writeq(pr_ctrl, fme_pr + FME_PR_CTRL); |
| |
| dev_dbg(dev, |
| "waiting for PR resource in HW to be initialized and ready\n"); |
| |
| if (readq_poll_timeout(fme_pr + FME_PR_STS, pr_status, |
| (pr_status & FME_PR_STS_PR_STS) == |
| FME_PR_STS_PR_STS_IDLE, 1, PR_WAIT_TIMEOUT)) { |
| dev_err(dev, "PR Status timeout\n"); |
| priv->pr_error = fme_mgr_pr_error_handle(fme_pr); |
| return -ETIMEDOUT; |
| } |
| |
| dev_dbg(dev, "check and clear previous PR error\n"); |
| priv->pr_error = fme_mgr_pr_error_handle(fme_pr); |
| if (priv->pr_error) |
| dev_dbg(dev, "previous PR error detected %llx\n", |
| (unsigned long long)priv->pr_error); |
| |
| dev_dbg(dev, "set PR port ID\n"); |
| |
| pr_ctrl = readq(fme_pr + FME_PR_CTRL); |
| pr_ctrl &= ~FME_PR_CTRL_PR_RGN_ID; |
| pr_ctrl |= FIELD_PREP(FME_PR_CTRL_PR_RGN_ID, info->region_id); |
| writeq(pr_ctrl, fme_pr + FME_PR_CTRL); |
| |
| return 0; |
| } |
| |
| static int fme_mgr_write(struct fpga_manager *mgr, |
| const char *buf, size_t count) |
| { |
| struct device *dev = &mgr->dev; |
| struct fme_mgr_priv *priv = mgr->priv; |
| void __iomem *fme_pr = priv->ioaddr; |
| u64 pr_ctrl, pr_status, pr_data; |
| int delay = 0, pr_credit, i = 0; |
| |
| dev_dbg(dev, "start request\n"); |
| |
| pr_ctrl = readq(fme_pr + FME_PR_CTRL); |
| pr_ctrl |= FME_PR_CTRL_PR_START; |
| writeq(pr_ctrl, fme_pr + FME_PR_CTRL); |
| |
| dev_dbg(dev, "pushing data from bitstream to HW\n"); |
| |
| /* |
| * driver can push data to PR hardware using PR_DATA register once HW |
| * has enough pr_credit (> 1), pr_credit reduces one for every 32bit |
| * pr data write to PR_DATA register. If pr_credit <= 1, driver needs |
| * to wait for enough pr_credit from hardware by polling. |
| */ |
| pr_status = readq(fme_pr + FME_PR_STS); |
| pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status); |
| |
| while (count > 0) { |
| while (pr_credit <= 1) { |
| if (delay++ > PR_WAIT_TIMEOUT) { |
| dev_err(dev, "PR_CREDIT timeout\n"); |
| return -ETIMEDOUT; |
| } |
| udelay(1); |
| |
| pr_status = readq(fme_pr + FME_PR_STS); |
| pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status); |
| } |
| |
| if (count < 4) { |
| dev_err(dev, "Invalid PR bitstream size\n"); |
| return -EINVAL; |
| } |
| |
| pr_data = 0; |
| pr_data |= FIELD_PREP(FME_PR_DATA_PR_DATA_RAW, |
| *(((u32 *)buf) + i)); |
| writeq(pr_data, fme_pr + FME_PR_DATA); |
| count -= 4; |
| pr_credit--; |
| i++; |
| } |
| |
| return 0; |
| } |
| |
| static int fme_mgr_write_complete(struct fpga_manager *mgr, |
| struct fpga_image_info *info) |
| { |
| struct device *dev = &mgr->dev; |
| struct fme_mgr_priv *priv = mgr->priv; |
| void __iomem *fme_pr = priv->ioaddr; |
| u64 pr_ctrl; |
| |
| pr_ctrl = readq(fme_pr + FME_PR_CTRL); |
| pr_ctrl |= FME_PR_CTRL_PR_COMPLETE; |
| writeq(pr_ctrl, fme_pr + FME_PR_CTRL); |
| |
| dev_dbg(dev, "green bitstream push complete\n"); |
| dev_dbg(dev, "waiting for HW to release PR resource\n"); |
| |
| if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl, |
| !(pr_ctrl & FME_PR_CTRL_PR_START), 1, |
| PR_WAIT_TIMEOUT)) { |
| dev_err(dev, "PR Completion ACK timeout.\n"); |
| return -ETIMEDOUT; |
| } |
| |
| dev_dbg(dev, "PR operation complete, checking status\n"); |
| priv->pr_error = fme_mgr_pr_error_handle(fme_pr); |
| if (priv->pr_error) { |
| dev_dbg(dev, "PR error detected %llx\n", |
| (unsigned long long)priv->pr_error); |
| return -EIO; |
| } |
| |
| dev_dbg(dev, "PR done successfully\n"); |
| |
| return 0; |
| } |
| |
| static enum fpga_mgr_states fme_mgr_state(struct fpga_manager *mgr) |
| { |
| return FPGA_MGR_STATE_UNKNOWN; |
| } |
| |
| static u64 fme_mgr_status(struct fpga_manager *mgr) |
| { |
| struct fme_mgr_priv *priv = mgr->priv; |
| |
| return pr_error_to_mgr_status(priv->pr_error); |
| } |
| |
| static const struct fpga_manager_ops fme_mgr_ops = { |
| .write_init = fme_mgr_write_init, |
| .write = fme_mgr_write, |
| .write_complete = fme_mgr_write_complete, |
| .state = fme_mgr_state, |
| .status = fme_mgr_status, |
| }; |
| |
| static void fme_mgr_get_compat_id(void __iomem *fme_pr, |
| struct fpga_compat_id *id) |
| { |
| id->id_l = readq(fme_pr + FME_PR_INTFC_ID_L); |
| id->id_h = readq(fme_pr + FME_PR_INTFC_ID_H); |
| } |
| |
| static int fme_mgr_probe(struct platform_device *pdev) |
| { |
| struct dfl_fme_mgr_pdata *pdata = dev_get_platdata(&pdev->dev); |
| struct fpga_compat_id *compat_id; |
| struct device *dev = &pdev->dev; |
| struct fme_mgr_priv *priv; |
| struct fpga_manager *mgr; |
| struct resource *res; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| if (pdata->ioaddr) |
| priv->ioaddr = pdata->ioaddr; |
| |
| if (!priv->ioaddr) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->ioaddr = devm_ioremap_resource(dev, res); |
| if (IS_ERR(priv->ioaddr)) |
| return PTR_ERR(priv->ioaddr); |
| } |
| |
| compat_id = devm_kzalloc(dev, sizeof(*compat_id), GFP_KERNEL); |
| if (!compat_id) |
| return -ENOMEM; |
| |
| fme_mgr_get_compat_id(priv->ioaddr, compat_id); |
| |
| mgr = devm_fpga_mgr_create(dev, "DFL FME FPGA Manager", |
| &fme_mgr_ops, priv); |
| if (!mgr) |
| return -ENOMEM; |
| |
| mgr->compat_id = compat_id; |
| |
| return devm_fpga_mgr_register(dev, mgr); |
| } |
| |
| static struct platform_driver fme_mgr_driver = { |
| .driver = { |
| .name = DFL_FPGA_FME_MGR, |
| }, |
| .probe = fme_mgr_probe, |
| }; |
| |
| module_platform_driver(fme_mgr_driver); |
| |
| MODULE_DESCRIPTION("FPGA Manager for DFL FPGA Management Engine"); |
| MODULE_AUTHOR("Intel Corporation"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:dfl-fme-mgr"); |