| // SPDX-License-Identifier: BSD-3-Clause |
| |
| /dts-v1/; |
| |
| #include "msm8996.dtsi" |
| #include "pm8994.dtsi" |
| #include "pmi8994.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| |
| / { |
| model = "Inforce 6640 Single Board Computer"; |
| compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096"; |
| |
| qcom,msm-id = <291 0x00030001>; |
| qcom,board-id = <0x00010018 0>; |
| |
| aliases { |
| serial0 = &blsp2_uart2; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| v1p05: v1p05-regulator { |
| compatible = "regulator-fixed"; |
| reglator-name = "v1p05"; |
| regulator-always-on; |
| regulator-boot-on; |
| |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| |
| vin-supply = <&v5p0>; |
| }; |
| |
| v12_poe: v12-poe-regulator { |
| compatible = "regulator-fixed"; |
| reglator-name = "v12_poe"; |
| regulator-always-on; |
| regulator-boot-on; |
| |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| }; |
| |
| v3p3: v3p3-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "v3p3"; |
| regulator-always-on; |
| regulator-boot-on; |
| |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| vin-supply = <&v12_poe>; |
| }; |
| |
| v5p0: v5p0-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "v5p0"; |
| regulator-always-on; |
| regulator-boot-on; |
| |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| |
| vin-supply = <&v12_poe>; |
| }; |
| |
| vph_pwr: vph-pwr-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-always-on; |
| regulator-boot-on; |
| |
| regulator-min-microvolt = <3800000>; |
| regulator-max-microvolt = <3800000>; |
| }; |
| }; |
| |
| &blsp2_uart2 { |
| status = "okay"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&blsp2_uart2_2pins_default>; |
| pinctrl-1 = <&blsp2_uart2_2pins_sleep>; |
| }; |
| |
| &gpu { |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| status = "okay"; |
| }; |
| |
| &hdmi_phy { |
| status = "okay"; |
| }; |
| |
| &mdss { |
| status = "okay"; |
| }; |
| |
| &sdc2_state_on { |
| cd-pins { |
| pins = "gpio38"; |
| function = "gpio"; |
| |
| bias-pull-up; |
| drive-strength = <16>; |
| }; |
| }; |
| |
| &sdc2_state_off { |
| cd-pins { |
| pins = "gpio38"; |
| function = "gpio"; |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| }; |
| |
| &rpm_requests { |
| regulators-0 { |
| compatible = "qcom,rpm-pm8994-regulators"; |
| |
| vdd_s1-supply = <&vph_pwr>; |
| vdd_s2-supply = <&vph_pwr>; |
| vdd_s3-supply = <&vph_pwr>; |
| vdd_s4-supply = <&vph_pwr>; |
| vdd_s5-supply = <&vph_pwr>; |
| vdd_s6-supply = <&vph_pwr>; |
| vdd_s7-supply = <&vph_pwr>; |
| vdd_s8-supply = <&vph_pwr>; |
| vdd_s9-supply = <&vph_pwr>; |
| vdd_s10-supply = <&vph_pwr>; |
| vdd_s11-supply = <&vph_pwr>; |
| vdd_s12-supply = <&vph_pwr>; |
| vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; |
| vdd_l3_l11-supply = <&vreg_s3a_1p3>; |
| vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; |
| vdd_l5_l7-supply = <&vreg_s5a_2p15>; |
| vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; |
| vdd_l8_l16_l30-supply = <&vph_pwr>; |
| vdd_l25-supply = <&vreg_s3a_1p3>; |
| vdd_lvs1_2-supply = <&vreg_s4a_1p8>; |
| |
| vreg_s3a_1p3: s3 { |
| regulator-name = "vreg_s3a_1p3"; |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| }; |
| |
| vreg_s4a_1p8: s4 { |
| regulator-name = "vreg_s4a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| vreg_s5a_2p15: s5 { |
| regulator-name = "vreg_s5a_2p15"; |
| regulator-min-microvolt = <2150000>; |
| regulator-max-microvolt = <2150000>; |
| }; |
| vreg_s7a_1p0: s7 { |
| regulator-name = "vreg_s7a_1p0"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| }; |
| |
| vreg_l1a_1p0: l1 { |
| regulator-name = "vreg_l1a_1p0"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| }; |
| vreg_l2a_1p25: l2 { |
| regulator-name = "vreg_l2a_1p25"; |
| regulator-min-microvolt = <1250000>; |
| regulator-max-microvolt = <1250000>; |
| }; |
| vreg_l3a_0p875: l3 { |
| regulator-name = "vreg_l3a_0p875"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <850000>; |
| }; |
| vreg_l4a_1p225: l4 { |
| regulator-name = "vreg_l4a_1p225"; |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| }; |
| vreg_l6a_1p2: l6 { |
| regulator-name = "vreg_l6a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| vreg_l8a_1p8: l8 { |
| regulator-name = "vreg_l8a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l9a_1p8: l9 { |
| regulator-name = "vreg_l9a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l10a_1p8: l10 { |
| regulator-name = "vreg_l10a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l11a_1p15: l11 { |
| regulator-name = "vreg_l11a_1p15"; |
| regulator-min-microvolt = <1150000>; |
| regulator-max-microvolt = <1150000>; |
| }; |
| vreg_l12a_1p8: l12 { |
| regulator-name = "vreg_l12a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l13a_2p95: l13 { |
| regulator-name = "vreg_l13a_2p95"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| vreg_l14a_1p8: l14 { |
| regulator-name = "vreg_l14a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l15a_1p8: l15 { |
| regulator-name = "vreg_l15a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l16a_2p7: l16 { |
| regulator-name = "vreg_l16a_2p7"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2700000>; |
| }; |
| vreg_l17a_2p8: l17 { |
| regulator-name = "vreg_l17a_2p8"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| }; |
| vreg_l18a_2p85: l18 { |
| regulator-name = "vreg_l18a_2p85"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2900000>; |
| }; |
| vreg_l19a_2p8: l19 { |
| regulator-name = "vreg_l19a_2p8"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| vreg_l20a_2p95: l20 { |
| regulator-name = "vreg_l20a_2p95"; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| regulator-allow-set-load; |
| }; |
| vreg_l21a_2p95: l21 { |
| regulator-name = "vreg_l21a_2p95"; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| vreg_l22a_3p0: l22 { |
| regulator-name = "vreg_l22a_3p0"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| vreg_l23a_2p8: l23 { |
| regulator-name = "vreg_l23a_2p8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| vreg_l24a_3p075: l24 { |
| regulator-name = "vreg_l24a_3p075"; |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3075000>; |
| }; |
| vreg_l25a_1p2: l25 { |
| regulator-name = "vreg_l25a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-allow-set-load; |
| }; |
| vreg_l26a_0p8: l27 { |
| regulator-name = "vreg_l26a_0p8"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| }; |
| vreg_l28a_0p925: l28 { |
| regulator-name = "vreg_l28a_0p925"; |
| regulator-min-microvolt = <925000>; |
| regulator-max-microvolt = <925000>; |
| regulator-allow-set-load; |
| }; |
| vreg_l29a_2p8: l29 { |
| regulator-name = "vreg_l29a_2p8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| vreg_l30a_1p8: l30 { |
| regulator-name = "vreg_l30a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l32a_1p8: l32 { |
| regulator-name = "vreg_l32a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vreg_lvs1a_1p8: lvs1 { |
| regulator-name = "vreg_lvs1a_1p8"; |
| }; |
| |
| vreg_lvs2a_1p8: lvs2 { |
| regulator-name = "vreg_lvs2a_1p8"; |
| }; |
| }; |
| }; |
| |
| &sdhc2 { |
| status = "okay"; |
| |
| bus-width = <4>; |
| |
| cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; |
| |
| vmmc-supply = <&vreg_l21a_2p95>; |
| vqmmc-supply = <&vreg_l13a_2p95>; |
| }; |
| |
| &ufshc { |
| status = "okay"; |
| |
| vcc-supply = <&vreg_l20a_2p95>; |
| vccq-supply = <&vreg_l25a_1p2>; |
| vccq2-supply = <&vreg_s4a_1p8>; |
| |
| vcc-max-microamp = <600000>; |
| vccq-max-microamp = <450000>; |
| vccq2-max-microamp = <450000>; |
| }; |
| |
| &ufsphy { |
| status = "okay"; |
| |
| vdda-phy-supply = <&vreg_l28a_0p925>; |
| vdda-pll-supply = <&vreg_l12a_1p8>; |
| }; |
| |
| &venus { |
| status = "okay"; |
| }; |
