| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Google CoachZ board device tree source |
| * |
| * Copyright 2020 Google LLC. |
| */ |
| |
| /dts-v1/; |
| |
| #include "sc7180-trogdor-coachz.dtsi" |
| |
| / { |
| model = "Google CoachZ (rev1 - 2)"; |
| compatible = "google,coachz-rev1", "google,coachz-rev2", "qcom,sc7180"; |
| }; |
| |
| /* |
| * CoachZ rev1 is stuffed with a 47k NTC as charger thermistor which currently |
| * is not supported by the PM6150 ADC driver. Disable the charger thermal zone |
| * to avoid using bogus temperature values. |
| */ |
| &charger_thermal { |
| status = "disabled"; |
| }; |
| |
| &pm6150_adc { |
| /delete-node/ skin-temp-thermistor@4e; |
| /delete-node/ charger-thermistor@4f; |
| }; |
| |
| &pm6150_adc_tm { |
| status = "disabled"; |
| |
| /delete-node/ charger-thermistor@0; |
| /delete-node/ skin-temp-thermistor@1; |
| }; |
| |
| /* |
| * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature, |
| * which currently is not supported by the PM6150 ADC driver. Disable the |
| * skin temperature thermal zone to avoid using bogus temperature values. |
| */ |
| &skin_temp_thermal { |
| status = "disabled"; |
| }; |
| |
| &tlmm { |
| gpio-line-names = "HUB_RST_L", |
| "AP_RAM_ID0", |
| "AP_SKU_ID2", |
| "AP_RAM_ID1", |
| "FP_TO_AP_IRQ_L", |
| "AP_RAM_ID2", |
| "UF_CAM_EN", |
| "WF_CAM_EN", |
| "TS_RESET_L", |
| "TS_INT_L", |
| "FPMCU_BOOT0", |
| "EDP_BRIJ_IRQ", |
| "AP_EDP_BKLTEN", |
| "UF_CAM_MCLK", |
| "WF_CAM_CLK", |
| "EDP_BRIJ_I2C_SDA", |
| "EDP_BRIJ_I2C_SCL", |
| "UF_CAM_SDA", |
| "UF_CAM_SCL", |
| "WF_CAM_SDA", |
| "WF_CAM_SCL", |
| "WLC_IRQ", |
| "FP_RST_L", |
| "AMP_EN", |
| "WLC_NRST", |
| "AP_SAR_SENSOR_SDA", |
| "AP_SAR_SENSOR_SCL", |
| "", |
| "", |
| "WF_CAM_RST_L", |
| "UF_CAM_RST_L", |
| "AP_BRD_ID2", |
| "BRIJ_SUSPEND", |
| "AP_BRD_ID0", |
| "AP_H1_SPI_MISO", |
| "AP_H1_SPI_MOSI", |
| "AP_H1_SPI_CLK", |
| "AP_H1_SPI_CS_L", |
| "", |
| "", |
| "", |
| "", |
| "H1_AP_INT_ODL", |
| "", |
| "UART_AP_TX_DBG_RX", |
| "UART_DBG_TX_AP_RX", |
| "", |
| "", |
| "FORCED_USB_BOOT", |
| "AMP_BCLK", |
| "AMP_LRCLK", |
| "AMP_DIN", |
| "EN_PP3300_DX_EDP", |
| "HP_BCLK", |
| "HP_LRCLK", |
| "HP_DOUT", |
| "HP_DIN", |
| "HP_MCLK", |
| "AP_SKU_ID0", |
| "AP_EC_SPI_MISO", |
| "AP_EC_SPI_MOSI", |
| "AP_EC_SPI_CLK", |
| "AP_EC_SPI_CS_L", |
| "AP_SPI_CLK", |
| "AP_SPI_MOSI", |
| "AP_SPI_MISO", |
| /* |
| * AP_FLASH_WP_L is crossystem ABI. Schematics |
| * call it BIOS_FLASH_WP_L. |
| */ |
| "AP_FLASH_WP_L", |
| "", |
| "AP_SPI_CS0_L", |
| "SD_CD_ODL", |
| "", |
| "", |
| "", |
| "", |
| "FPMCU_SEL", |
| "UIM2_DATA", |
| "UIM2_CLK", |
| "UIM2_RST", |
| "UIM2_PRESENT_L", |
| "UIM1_DATA", |
| "UIM1_CLK", |
| "UIM1_RST", |
| "", |
| "DMIC_CLK_EN", |
| "HUB_EN", |
| "", |
| "AP_SPI_FP_MISO", |
| "AP_SPI_FP_MOSI", |
| "AP_SPI_FP_CLK", |
| "AP_SPI_FP_CS_L", |
| "AP_SKU_ID1", |
| "AP_RST_REQ", |
| "", |
| "AP_BRD_ID1", |
| "AP_EC_INT_L", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "EDP_BRIJ_EN", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "AP_TS_PEN_I2C_SDA", |
| "AP_TS_PEN_I2C_SCL", |
| "DP_HOT_PLUG_DET", |
| "EC_IN_RW_ODL"; |
| }; |
