| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Misc strange devices |
| # |
| |
| menu "Misc devices" |
| |
| config SENSORS_LIS3LV02D |
| tristate |
| depends on INPUT |
| |
| config AD525X_DPOT |
| tristate "Analog Devices Digital Potentiometers" |
| depends on (I2C || SPI) && SYSFS |
| help |
| If you say yes here, you get support for the Analog Devices |
| AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 |
| AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, |
| AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, |
| AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, |
| AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, |
| AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, |
| ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, |
| AD5271, AD5272, AD5274 |
| digital potentiometer chips. |
| |
| See Documentation/misc-devices/ad525x_dpot.rst for the |
| userspace interface. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ad525x_dpot. |
| |
| config AD525X_DPOT_I2C |
| tristate "support I2C bus connection" |
| depends on AD525X_DPOT && I2C |
| help |
| Say Y here if you have a digital potentiometers hooked to an I2C bus. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad525x_dpot-i2c. |
| |
| config AD525X_DPOT_SPI |
| tristate "support SPI bus connection" |
| depends on AD525X_DPOT && SPI_MASTER |
| help |
| Say Y here if you have a digital potentiometers hooked to an SPI bus. |
| |
| If unsure, say N (but it's safe to say "Y"). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ad525x_dpot-spi. |
| |
| config DUMMY_IRQ |
| tristate "Dummy IRQ handler" |
| help |
| This module accepts a single 'irq' parameter, which it should register for. |
| The sole purpose of this module is to help with debugging of systems on |
| which spurious IRQs would happen on disabled IRQ vector. |
| |
| config IBM_ASM |
| tristate "Device driver for IBM RSA service processor" |
| depends on X86 && PCI && INPUT |
| depends on SERIAL_8250 || SERIAL_8250=n |
| help |
| This option enables device driver support for in-band access to the |
| IBM RSA (Condor) service processor in eServer xSeries systems. |
| The ibmasm device driver allows user space application to access |
| ASM (Advanced Systems Management) functions on the service |
| processor. The driver is meant to be used in conjunction with |
| a user space API. |
| The ibmasm driver also enables the OS to use the UART on the |
| service processor board as a regular serial port. To make use of |
| this feature serial driver support (CONFIG_SERIAL_8250) must be |
| enabled. |
| |
| WARNING: This software may not be supported or function |
| correctly on your IBM server. Please consult the IBM ServerProven |
| website <https://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> |
| for information on the specific driver level and support statement |
| for your IBM server. |
| |
| config IBMVMC |
| tristate "IBM Virtual Management Channel support" |
| depends on PPC_PSERIES |
| help |
| This is the IBM POWER Virtual Management Channel |
| |
| This driver is to be used for the POWER Virtual |
| Management Channel virtual adapter on the PowerVM |
| platform. It provides both request/response and |
| async message support through the /dev/ibmvmc node. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ibmvmc. |
| |
| config PHANTOM |
| tristate "Sensable PHANToM (PCI)" |
| depends on PCI |
| help |
| Say Y here if you want to build a driver for Sensable PHANToM device. |
| |
| This driver is only for PCI PHANToMs. |
| |
| If you choose to build module, its name will be phantom. If unsure, |
| say N here. |
| |
| config TIFM_CORE |
| tristate "TI Flash Media interface support" |
| depends on PCI |
| help |
| If you want support for Texas Instruments(R) Flash Media adapters |
| you should select this option and then also choose an appropriate |
| host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter |
| support', if you have a TI PCI74xx compatible card reader, for |
| example. |
| You will also have to select some flash card format drivers. MMC/SD |
| cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD |
| Interface support (MMC_TIFM_SD)'. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called tifm_core. |
| |
| config TIFM_7XX1 |
| tristate "TI Flash Media PCI74xx/PCI76xx host adapter support" |
| depends on PCI && TIFM_CORE |
| default TIFM_CORE |
| help |
| This option enables support for Texas Instruments(R) PCI74xx and |
| PCI76xx families of Flash Media adapters, found in many laptops. |
| To make actual use of the device, you will have to select some |
| flash card format drivers, as outlined in the TIFM_CORE Help. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called tifm_7xx1. |
| |
| config ICS932S401 |
| tristate "Integrated Circuits ICS932S401" |
| depends on I2C |
| help |
| If you say yes here you get support for the Integrated Circuits |
| ICS932S401 clock control chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ics932s401. |
| |
| config ATMEL_SSC |
| tristate "Device driver for Atmel SSC peripheral" |
| depends on HAS_IOMEM && (ARCH_AT91 || COMPILE_TEST) |
| help |
| This option enables device driver support for Atmel Synchronized |
| Serial Communication peripheral (SSC). |
| |
| The SSC peripheral supports a wide variety of serial frame based |
| communications, i.e. I2S, SPI, etc. |
| |
| If unsure, say N. |
| |
| config ENCLOSURE_SERVICES |
| tristate "Enclosure Services" |
| help |
| Provides support for intelligent enclosures (bays which |
| contain storage devices). You also need either a host |
| driver (SCSI/ATA) which supports enclosures |
| or a SCSI enclosure device (SES) to use these services. |
| |
| config SGI_XP |
| tristate "Support communication between SGI SSIs" |
| depends on NET |
| depends on X86_UV && SMP |
| depends on X86_64 || BROKEN |
| select SGI_GRU if X86_64 && SMP |
| help |
| An SGI machine can be divided into multiple Single System |
| Images which act independently of each other and have |
| hardware based memory protection from the others. Enabling |
| this feature will allow for direct communication between SSIs |
| based on a network adapter and DMA messaging. |
| |
| config SMPRO_ERRMON |
| tristate "Ampere Computing SMPro error monitor driver" |
| depends on MFD_SMPRO || COMPILE_TEST |
| help |
| Say Y here to get support for the SMpro error monitor function |
| provided by Ampere Computing's Altra and Altra Max SoCs. Upon |
| loading, the driver creates sysfs files which can be use to gather |
| multiple HW error data reported via read and write system calls. |
| |
| To compile this driver as a module, say M here. The driver will be |
| called smpro-errmon. |
| |
| config SMPRO_MISC |
| tristate "Ampere Computing SMPro miscellaneous driver" |
| depends on MFD_SMPRO || COMPILE_TEST |
| help |
| Say Y here to get support for the SMpro error miscellalenous function |
| provided by Ampere Computing's Altra and Altra Max SoCs. |
| |
| To compile this driver as a module, say M here. The driver will be |
| called smpro-misc. |
| |
| config CS5535_MFGPT |
| tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" |
| depends on MFD_CS5535 |
| help |
| This driver provides access to MFGPT functionality for other |
| drivers that need timers. MFGPTs are available in the CS5535 and |
| CS5536 companion chips that are found in AMD Geode and several |
| other platforms. They have a better resolution and max interval |
| than the generic PIT, and are suitable for use as high-res timers. |
| You probably don't want to enable this manually; other drivers that |
| make use of it should enable it. |
| |
| config CS5535_MFGPT_DEFAULT_IRQ |
| int |
| depends on CS5535_MFGPT |
| default 7 |
| help |
| MFGPTs on the CS5535 require an interrupt. The selected IRQ |
| can be overridden as a module option as well as by driver that |
| use the cs5535_mfgpt_ API; however, different architectures might |
| want to use a different IRQ by default. This is here for |
| architectures to set as necessary. |
| |
| config CS5535_CLOCK_EVENT_SRC |
| tristate "CS5535/CS5536 high-res timer (MFGPT) events" |
| depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT |
| help |
| This driver provides a clock event source based on the MFGPT |
| timer(s) in the CS5535 and CS5536 companion chips. |
| MFGPTs have a better resolution and max interval than the |
| generic PIT, and are suitable for use as high-res timers. |
| |
| config GEHC_ACHC |
| tristate "GEHC ACHC support" |
| depends on SPI && SYSFS |
| depends on SOC_IMX53 || COMPILE_TEST |
| select FW_LOADER |
| help |
| Support for GE ACHC microcontroller, that is part of the GE |
| PPD device. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gehc-achc. |
| |
| config HI6421V600_IRQ |
| tristate "HiSilicon Hi6421v600 IRQ and powerkey" |
| depends on OF |
| depends on SPMI |
| depends on HAS_IOMEM |
| select MFD_CORE |
| select REGMAP_SPMI |
| help |
| This driver provides IRQ handling for Hi6421v600, used on |
| some Kirin chipsets, like the one at Hikey 970. |
| |
| config HP_ILO |
| tristate "Channel interface driver for the HP iLO processor" |
| depends on PCI |
| help |
| The channel interface driver allows applications to communicate |
| with iLO management processors present on HP ProLiant servers. |
| Upon loading, the driver creates /dev/hpilo/dXccbN files, which |
| can be used to gather data from the management processor, via |
| read and write system calls. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hpilo. |
| |
| config QCOM_COINCELL |
| tristate "Qualcomm coincell charger support" |
| depends on MFD_SPMI_PMIC || COMPILE_TEST |
| help |
| This driver supports the coincell block found inside of |
| Qualcomm PMICs. The coincell charger provides a means to |
| charge a coincell battery or backup capacitor which is used |
| to maintain PMIC register and RTC state in the absence of |
| external power. |
| |
| config QCOM_FASTRPC |
| tristate "Qualcomm FastRPC" |
| depends on ARCH_QCOM || COMPILE_TEST |
| depends on RPMSG |
| select DMA_SHARED_BUFFER |
| select QCOM_SCM |
| help |
| Provides a communication mechanism that allows for clients to |
| make remote method invocations across processor boundary to |
| applications DSP processor. Say M if you want to enable this |
| module. |
| |
| config SGI_GRU |
| tristate "SGI GRU driver" |
| depends on X86_UV && SMP |
| select MMU_NOTIFIER |
| help |
| The GRU is a hardware resource located in the system chipset. The GRU |
| contains memory that can be mmapped into the user address space. |
| This memory is used to communicate with the GRU to perform functions |
| such as load/store, scatter/gather, bcopy, AMOs, etc. The GRU is |
| directly accessed by user instructions using user virtual addresses. |
| GRU instructions (ex., bcopy) use user virtual addresses for operands. |
| |
| If you are not running on a SGI UV system, say N. |
| |
| config SGI_GRU_DEBUG |
| bool "SGI GRU driver debug" |
| depends on SGI_GRU |
| help |
| This option enables additional debugging code for the SGI GRU driver. |
| If you are unsure, say N. |
| |
| config APDS9802ALS |
| tristate "Medfield Avago APDS9802 ALS Sensor module" |
| depends on I2C |
| help |
| If you say yes here you get support for the ALS APDS9802 ambient |
| light sensor. |
| |
| This driver can also be built as a module. If so, the module |
| will be called apds9802als. |
| |
| config ISL29003 |
| tristate "Intersil ISL29003 ambient light sensor" |
| depends on I2C && SYSFS |
| help |
| If you say yes here you get support for the Intersil ISL29003 |
| ambient light sensor. |
| |
| This driver can also be built as a module. If so, the module |
| will be called isl29003. |
| |
| config ISL29020 |
| tristate "Intersil ISL29020 ambient light sensor" |
| depends on I2C |
| help |
| If you say yes here you get support for the Intersil ISL29020 |
| ambient light sensor. |
| |
| This driver can also be built as a module. If so, the module |
| will be called isl29020. |
| |
| config SENSORS_TSL2550 |
| tristate "Taos TSL2550 ambient light sensor" |
| depends on I2C && SYSFS |
| help |
| If you say yes here you get support for the Taos TSL2550 |
| ambient light sensor. |
| |
| This driver can also be built as a module. If so, the module |
| will be called tsl2550. |
| |
| config SENSORS_BH1770 |
| tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" |
| depends on I2C |
| help |
| Say Y here if you want to build a driver for BH1770GLC (ROHM) or |
| SFH7770 (Osram) combined ambient light and proximity sensor chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bh1770glc. If unsure, say N here. |
| |
| config SENSORS_APDS990X |
| tristate "APDS990X combined als and proximity sensors" |
| depends on I2C |
| help |
| Say Y here if you want to build a driver for Avago APDS990x |
| combined ambient light and proximity sensor chip. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called apds990x. If unsure, say N here. |
| |
| config HMC6352 |
| tristate "Honeywell HMC6352 compass" |
| depends on I2C |
| help |
| This driver provides support for the Honeywell HMC6352 compass, |
| providing configuration and heading data via sysfs. |
| |
| config DS1682 |
| tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" |
| depends on I2C |
| help |
| If you say yes here you get support for Dallas Semiconductor |
| DS1682 Total Elapsed Time Recorder. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ds1682. |
| |
| config VMWARE_BALLOON |
| tristate "VMware Balloon Driver" |
| depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST |
| select MEMORY_BALLOON |
| help |
| This is VMware physical memory management driver which acts |
| like a "balloon" that can be inflated to reclaim physical pages |
| by reserving them in the guest and invalidating them in the |
| monitor, freeing up the underlying machine pages so they can |
| be allocated to other guests. The balloon can also be deflated |
| to allow the guest to use more physical memory. |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called vmw_balloon. |
| |
| config PCH_PHUB |
| tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" |
| select GENERIC_NET_UTILS |
| depends on PCI && (X86_32 || MIPS || COMPILE_TEST) |
| help |
| This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of |
| Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded |
| processor. The Topcliff has MAC address and Option ROM data in SROM. |
| This driver can access MAC address and Option ROM data in SROM. |
| |
| This driver also can be used for LAPIS Semiconductor's IOH, |
| ML7213/ML7223/ML7831. |
| ML7213 which is for IVI(In-Vehicle Infotainment) use. |
| ML7223 IOH is for MP(Media Phone) use. |
| ML7831 IOH is for general purpose use. |
| ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. |
| ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called pch_phub. |
| |
| config LATTICE_ECP3_CONFIG |
| tristate "Lattice ECP3 FPGA bitstream configuration via SPI" |
| depends on SPI && SYSFS |
| select FW_LOADER |
| help |
| This option enables support for bitstream configuration (programming |
| or loading) of the Lattice ECP3 FPGA family via SPI. |
| |
| If unsure, say N. |
| |
| config SRAM |
| bool "Generic on-chip SRAM driver" |
| depends on HAS_IOMEM |
| select GENERIC_ALLOCATOR |
| select SRAM_EXEC if ARM |
| help |
| This driver allows you to declare a memory region to be managed by |
| the genalloc API. It is supposed to be used for small on-chip SRAM |
| areas found on many SoCs. |
| |
| config SRAM_EXEC |
| bool |
| |
| config DW_XDATA_PCIE |
| depends on PCI |
| tristate "Synopsys DesignWare xData PCIe driver" |
| help |
| This driver allows controlling Synopsys DesignWare PCIe traffic |
| generator IP also known as xData, present in Synopsys DesignWare |
| PCIe Endpoint prototype. |
| |
| If unsure, say N. |
| |
| config PCI_ENDPOINT_TEST |
| depends on PCI |
| select CRC32 |
| tristate "PCI Endpoint Test driver" |
| help |
| Enable this configuration option to enable the host side test driver |
| for PCI Endpoint. |
| |
| config XILINX_SDFEC |
| tristate "Xilinx SDFEC 16" |
| depends on HAS_IOMEM |
| help |
| This option enables support for the Xilinx SDFEC (Soft Decision |
| Forward Error Correction) driver. This enables a char driver |
| for the SDFEC. |
| |
| You may select this driver if your design instantiates the |
| SDFEC(16nm) hardened block. To compile this as a module choose M. |
| |
| If unsure, say N. |
| |
| config MISC_RTSX |
| tristate |
| default MISC_RTSX_PCI || MISC_RTSX_USB |
| |
| config UID_SYS_STATS |
| bool "Per-UID statistics" |
| depends on PROFILING && TASK_XACCT && TASK_IO_ACCOUNTING |
| help |
| Per UID based cpu time statistics exported to /proc/uid_cputime |
| Per UID based io statistics exported to /proc/uid_io |
| Per UID based procstat control in /proc/uid_procstat |
| |
| config HISI_HIKEY_USB |
| tristate "USB GPIO Hub on HiSilicon Hikey 960/970 Platform" |
| depends on (OF && GPIOLIB) || COMPILE_TEST |
| depends on USB_ROLE_SWITCH |
| help |
| If you say yes here this adds support for the on-board USB GPIO hub |
| found on HiKey 960/970 boards, which is necessary to support |
| switching between the dual-role USB-C port and the USB-A host ports |
| using only one USB controller. |
| |
| config OPEN_DICE |
| tristate "Open Profile for DICE driver" |
| depends on OF_RESERVED_MEM |
| depends on HAS_IOMEM |
| help |
| This driver exposes a DICE reserved memory region to userspace via |
| a character device. The memory region contains Compound Device |
| Identifiers (CDIs) generated by firmware as an output of DICE |
| measured boot flow. Userspace can use CDIs for remote attestation |
| and sealing. |
| |
| If unsure, say N. |
| |
| config NTSYNC |
| tristate "NT synchronization primitive emulation" |
| depends on BROKEN |
| help |
| This module provides kernel support for emulation of Windows NT |
| synchronization primitives. It is not a hardware driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ntsync. |
| |
| If unsure, say N. |
| |
| config VCPU_STALL_DETECTOR |
| tristate "Guest vCPU stall detector" |
| depends on OF && HAS_IOMEM |
| help |
| When this driver is bound inside a KVM guest, it will |
| periodically "pet" an MMIO stall detector device from each vCPU |
| and allow the host to detect vCPU stalls. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called vcpu_stall_detector. |
| |
| If you do not intend to run this kernel as a guest, say N. |
| |
| config TMR_MANAGER |
| tristate "Select TMR Manager" |
| depends on MICROBLAZE && MB_MANAGER |
| help |
| This option enables the driver developed for TMR Manager. |
| The Triple Modular Redundancy(TMR) manager provides support for |
| fault detection. |
| |
| Say N here unless you know what you are doing. |
| |
| config TMR_INJECT |
| tristate "Select TMR Inject" |
| depends on TMR_MANAGER && FAULT_INJECTION_DEBUG_FS |
| help |
| This option enables the driver developed for TMR Inject. |
| The Triple Modular Redundancy(TMR) Inject provides |
| fault injection. |
| |
| Say N here unless you know what you are doing. |
| |
| config TPS6594_ESM |
| tristate "TI TPS6594 Error Signal Monitor support" |
| depends on MFD_TPS6594 |
| default MFD_TPS6594 |
| help |
| Support ESM (Error Signal Monitor) on TPS6594 PMIC devices. |
| ESM is used typically to reboot the board in error condition. |
| |
| This driver can also be built as a module. If so, the module |
| will be called tps6594-esm. |
| |
| config TPS6594_PFSM |
| tristate "TI TPS6594 Pre-configurable Finite State Machine support" |
| depends on MFD_TPS6594 |
| default MFD_TPS6594 |
| help |
| Support PFSM (Pre-configurable Finite State Machine) on TPS6594 PMIC devices. |
| These devices integrate a finite state machine engine, which manages the state |
| of the device during operating state transition. |
| |
| This driver can also be built as a module. If so, the module |
| will be called tps6594-pfsm. |
| |
| config NSM |
| tristate "Nitro (Enclaves) Security Module support" |
| depends on VIRTIO |
| select HW_RANDOM |
| help |
| This driver provides support for the Nitro Security Module |
| in AWS EC2 Nitro based Enclaves. The driver exposes a /dev/nsm |
| device user space can use to communicate with the hypervisor. |
| |
| To compile this driver as a module, choose M here. |
| The module will be called nsm. |
| |
| config MARVELL_CN10K_DPI |
| tristate "Octeon CN10K DPI driver" |
| depends on PCI && PCI_IOV |
| depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT) |
| help |
| Enables Octeon CN10K DMA packet interface (DPI) driver which |
| intializes DPI hardware's physical function (PF) device's |
| global configuration and its virtual function (VFs) resource |
| configuration to enable DMA transfers. DPI PF device does not |
| have any data movement functionality, it only serves VF's |
| resource configuration requests. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mrvl_cn10k_dpi. |
| |
| source "drivers/misc/c2port/Kconfig" |
| source "drivers/misc/eeprom/Kconfig" |
| source "drivers/misc/cb710/Kconfig" |
| source "drivers/misc/ti-st/Kconfig" |
| source "drivers/misc/lis3lv02d/Kconfig" |
| source "drivers/misc/altera-stapl/Kconfig" |
| source "drivers/misc/mei/Kconfig" |
| source "drivers/misc/vmw_vmci/Kconfig" |
| source "drivers/misc/genwqe/Kconfig" |
| source "drivers/misc/echo/Kconfig" |
| source "drivers/misc/cxl/Kconfig" |
| source "drivers/misc/ocxl/Kconfig" |
| source "drivers/misc/bcm-vk/Kconfig" |
| source "drivers/misc/cardreader/Kconfig" |
| source "drivers/misc/uacce/Kconfig" |
| source "drivers/misc/pvpanic/Kconfig" |
| source "drivers/misc/mchp_pci1xxxx/Kconfig" |
| source "drivers/misc/keba/Kconfig" |
| endmenu |
