blob: b5959cc78b8d34e1ce51772b8dbc29532750d653 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Toshiba TC358775 DSI to LVDS bridge bindings
maintainers:
- Vinay Simha BN <simhavcs@gmail.com>
description: |
This binding supports DSI to LVDS bridge TC358775
MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
Video frame size:
Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
limited by 135 MHz LVDS speed
Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
panel, limited by 270 MHz LVDS speed.
properties:
compatible:
const: toshiba,tc358775
reg:
maxItems: 1
description: i2c address of the bridge, 0x0f
vdd-supply:
description: 1.2V LVDS Power Supply
vddio-supply:
description: 1.8V IO Power Supply
stby-gpios:
maxItems: 1
description: Standby pin, Low active
reset-gpios:
maxItems: 1
description: Hardware reset, Low active
ports:
type: object
description:
A node containing input and output port nodes with endpoint definitions
as documented in
Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
DSI Input. The remote endpoint phandle should be a
reference to a valid mipi_dsi_host device node.
port@1:
type: object
description: |
Video port for LVDS output (panel or connector).
port@2:
type: object
description: |
Video port for Dual link LVDS output (panel or connector).
required:
- port@0
- port@1
required:
- compatible
- reg
- vdd-supply
- vddio-supply
- stby-gpios
- reset-gpios
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
/* For single-link LVDS display panel */
i2c@78b8000 {
/* On High speed expansion */
label = "HS-I2C2";
reg = <0x078b8000 0x500>;
clock-frequency = <400000>; /* fastmode operation */
#address-cells = <1>;
#size-cells = <0>;
tc_bridge: bridge@f {
compatible = "toshiba,tc358775";
reg = <0x0f>;
vdd-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
d2l_in_test: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
port@1 {
reg = <1>;
lvds_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
};
dsi@1a98000 {
reg = <0x1a98000 0x25c>;
reg-names = "dsi_ctrl";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&d2l_in_test>;
data-lanes = <0 1 2 3>;
};
};
};
};
- |
/* For dual-link LVDS display panel */
i2c@78b8000 {
/* On High speed expansion */
label = "HS-I2C2";
reg = <0x078b8000 0x500>;
clock-frequency = <400000>; /* fastmode operation */
#address-cells = <1>;
#size-cells = <0>;
tc_bridge_dual: bridge@f {
compatible = "toshiba,tc358775";
reg = <0x0f>;
vdd-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
d2l_in_dual: endpoint {
remote-endpoint = <&dsi0_out_dual>;
};
};
port@1 {
reg = <1>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in0>;
};
};
port@2 {
reg = <2>;
lvds1_out: endpoint {
remote-endpoint = <&panel_in1>;
};
};
};
};
};
dsi@1a98000 {
reg = <0x1a98000 0x25c>;
reg-names = "dsi_ctrl";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi0_out_dual: endpoint {
remote-endpoint = <&d2l_in_dual>;
data-lanes = <0 1 2 3>;
};
};
};
};
...