| # Copyright 2020 Lubomir Rintel <lkundrak@v3.sk> |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/serial/8250.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: UART (Universal Asynchronous Receiver/Transmitter) bindings |
| |
| maintainers: |
| - devicetree@vger.kernel.org |
| |
| allOf: |
| - $ref: /schemas/serial.yaml# |
| - if: |
| required: |
| - aspeed,sirq-polarity-sense |
| then: |
| properties: |
| compatible: |
| const: aspeed,ast2500-vuart |
| - if: |
| properties: |
| compatible: |
| const: mrvl,mmp-uart |
| then: |
| properties: |
| reg-shift: |
| const: 2 |
| required: |
| - reg-shift |
| - if: |
| not: |
| properties: |
| compatible: |
| items: |
| - enum: |
| - ns8250 |
| - ns16450 |
| - ns16550 |
| - ns16550a |
| then: |
| anyOf: |
| - required: [ clock-frequency ] |
| - required: [ clocks ] |
| |
| properties: |
| compatible: |
| oneOf: |
| - const: ns8250 |
| - const: ns16450 |
| - const: ns16550 |
| - const: ns16550a |
| - const: ns16850 |
| - const: aspeed,ast2400-vuart |
| - const: aspeed,ast2500-vuart |
| - const: intel,xscale-uart |
| - const: mrvl,pxa-uart |
| - const: nuvoton,npcm750-uart |
| - const: nvidia,tegra20-uart |
| - const: nxp,lpc3220-uart |
| - items: |
| - enum: |
| - altr,16550-FIFO32 |
| - altr,16550-FIFO64 |
| - altr,16550-FIFO128 |
| - fsl,16550-FIFO64 |
| - fsl,ns16550 |
| - andestech,uart16550 |
| - nxp,lpc1850-uart |
| - opencores,uart16550-rtlsvn105 |
| - ti,da830-uart |
| - const: ns16550a |
| - items: |
| - enum: |
| - ns16750 |
| - cavium,octeon-3860-uart |
| - xlnx,xps-uart16550-2.00.b |
| - ralink,rt2880-uart |
| - enum: |
| - ns16550 # Deprecated, unless the FIFO really is broken |
| - ns16550a |
| - items: |
| - enum: |
| - ralink,mt7620a-uart |
| - ralink,rt3052-uart |
| - ralink,rt3883-uart |
| - const: ralink,rt2880-uart |
| - enum: |
| - ns16550 # Deprecated, unless the FIFO really is broken |
| - ns16550a |
| - items: |
| - enum: |
| - mediatek,mt7622-btif |
| - mediatek,mt7623-btif |
| - const: mediatek,mtk-btif |
| - items: |
| - enum: |
| - mediatek,mt7622-btif |
| - mediatek,mt7623-btif |
| - const: mediatek,mtk-btif |
| - items: |
| - const: mrvl,mmp-uart |
| - const: intel,xscale-uart |
| - items: |
| - enum: |
| - nvidia,tegra30-uart |
| - nvidia,tegra114-uart |
| - nvidia,tegra124-uart |
| - nvidia,tegra186-uart |
| - nvidia,tegra194-uart |
| - nvidia,tegra210-uart |
| - const: nvidia,tegra20-uart |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clock-frequency: true |
| |
| clocks: |
| maxItems: 1 |
| |
| resets: |
| maxItems: 1 |
| |
| current-speed: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: The current active speed of the UART. |
| |
| reg-offset: |
| description: | |
| Offset to apply to the mapbase from the start of the registers. |
| |
| reg-shift: |
| description: Quantity to shift the register offsets by. |
| |
| reg-io-width: |
| description: | |
| The size (in bytes) of the IO accesses that should be performed on the |
| device. There are some systems that require 32-bit accesses to the |
| UART (e.g. TI davinci). |
| |
| used-by-rtas: |
| type: boolean |
| description: | |
| Set to indicate that the port is in use by the OpenFirmware RTAS and |
| should not be registered. |
| |
| no-loopback-test: |
| type: boolean |
| description: | |
| Set to indicate that the port does not implement loopback test mode. |
| |
| fifo-size: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: The fifo size of the UART. |
| |
| auto-flow-control: |
| type: boolean |
| description: | |
| One way to enable automatic flow control support. The driver is |
| allowed to detect support for the capability even without this |
| property. |
| |
| tx-threshold: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: | |
| Specify the TX FIFO low water indication for parts with programmable |
| TX FIFO thresholds. |
| |
| overrun-throttle-ms: |
| description: | |
| How long to pause uart rx when input overrun is encountered. |
| |
| rts-gpios: true |
| cts-gpios: true |
| dtr-gpios: true |
| dsr-gpios: true |
| rng-gpios: true |
| dcd-gpios: true |
| |
| aspeed,sirq-polarity-sense: |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| description: | |
| Phandle to aspeed,ast2500-scu compatible syscon alongside register |
| offset and bit number to identify how the SIRQ polarity should be |
| configured. One possible data source is the LPC/eSPI mode bit. Only |
| applicable to aspeed,ast2500-vuart. |
| |
| required: |
| - reg |
| - interrupts |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| serial@80230000 { |
| compatible = "ns8250"; |
| reg = <0x80230000 0x100>; |
| interrupts = <10>; |
| reg-shift = <2>; |
| clock-frequency = <48000000>; |
| }; |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| serial@49042000 { |
| compatible = "andestech,uart16550", "ns16550a"; |
| reg = <0x49042000 0x400>; |
| interrupts = <80>; |
| clock-frequency = <48000000>; |
| cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; |
| rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; |
| dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
| dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
| rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| }; |
| - | |
| #include <dt-bindings/clock/aspeed-clock.h> |
| serial@1e787000 { |
| compatible = "aspeed,ast2500-vuart"; |
| reg = <0x1e787000 0x40>; |
| reg-shift = <2>; |
| interrupts = <8>; |
| clocks = <&syscon ASPEED_CLK_APB>; |
| no-loopback-test; |
| aspeed,sirq-polarity-sense = <&syscon 0x70 25>; |
| }; |
| |
| ... |
