| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Linux for s390 qdio support, buffer handling, qdio API and module support. |
| * |
| * Copyright IBM Corp. 2000, 2008 |
| * Author(s): Utz Bacher <utz.bacher@de.ibm.com> |
| * Jan Glauber <jang@linux.vnet.ibm.com> |
| * 2.6 cio integration by Cornelia Huck <cornelia.huck@de.ibm.com> |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/delay.h> |
| #include <linux/gfp.h> |
| #include <linux/io.h> |
| #include <linux/atomic.h> |
| #include <asm/debug.h> |
| #include <asm/qdio.h> |
| #include <asm/ipl.h> |
| |
| #include "cio.h" |
| #include "css.h" |
| #include "device.h" |
| #include "qdio.h" |
| #include "qdio_debug.h" |
| |
| MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\ |
| "Jan Glauber <jang@linux.vnet.ibm.com>"); |
| MODULE_DESCRIPTION("QDIO base support"); |
| MODULE_LICENSE("GPL"); |
| |
| static inline int do_siga_sync(unsigned long schid, |
| unsigned int out_mask, unsigned int in_mask, |
| unsigned int fc) |
| { |
| register unsigned long __fc asm ("0") = fc; |
| register unsigned long __schid asm ("1") = schid; |
| register unsigned long out asm ("2") = out_mask; |
| register unsigned long in asm ("3") = in_mask; |
| int cc; |
| |
| asm volatile( |
| " siga 0\n" |
| " ipm %0\n" |
| " srl %0,28\n" |
| : "=d" (cc) |
| : "d" (__fc), "d" (__schid), "d" (out), "d" (in) : "cc"); |
| return cc; |
| } |
| |
| static inline int do_siga_input(unsigned long schid, unsigned int mask, |
| unsigned int fc) |
| { |
| register unsigned long __fc asm ("0") = fc; |
| register unsigned long __schid asm ("1") = schid; |
| register unsigned long __mask asm ("2") = mask; |
| int cc; |
| |
| asm volatile( |
| " siga 0\n" |
| " ipm %0\n" |
| " srl %0,28\n" |
| : "=d" (cc) |
| : "d" (__fc), "d" (__schid), "d" (__mask) : "cc"); |
| return cc; |
| } |
| |
| /** |
| * do_siga_output - perform SIGA-w/wt function |
| * @schid: subchannel id or in case of QEBSM the subchannel token |
| * @mask: which output queues to process |
| * @bb: busy bit indicator, set only if SIGA-w/wt could not access a buffer |
| * @fc: function code to perform |
| * @aob: asynchronous operation block |
| * |
| * Returns condition code. |
| * Note: For IQDC unicast queues only the highest priority queue is processed. |
| */ |
| static inline int do_siga_output(unsigned long schid, unsigned long mask, |
| unsigned int *bb, unsigned int fc, |
| unsigned long aob) |
| { |
| register unsigned long __fc asm("0") = fc; |
| register unsigned long __schid asm("1") = schid; |
| register unsigned long __mask asm("2") = mask; |
| register unsigned long __aob asm("3") = aob; |
| int cc; |
| |
| asm volatile( |
| " siga 0\n" |
| " ipm %0\n" |
| " srl %0,28\n" |
| : "=d" (cc), "+d" (__fc), "+d" (__aob) |
| : "d" (__schid), "d" (__mask) |
| : "cc"); |
| *bb = __fc >> 31; |
| return cc; |
| } |
| |
| /** |
| * qdio_do_eqbs - extract buffer states for QEBSM |
| * @q: queue to manipulate |
| * @state: state of the extracted buffers |
| * @start: buffer number to start at |
| * @count: count of buffers to examine |
| * @auto_ack: automatically acknowledge buffers |
| * |
| * Returns the number of successfully extracted equal buffer states. |
| * Stops processing if a state is different from the last buffers state. |
| */ |
| static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state, |
| int start, int count, int auto_ack) |
| { |
| int tmp_count = count, tmp_start = start, nr = q->nr; |
| unsigned int ccq = 0; |
| |
| qperf_inc(q, eqbs); |
| |
| if (!q->is_input_q) |
| nr += q->irq_ptr->nr_input_qs; |
| again: |
| ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count, |
| auto_ack); |
| |
| switch (ccq) { |
| case 0: |
| case 32: |
| /* all done, or next buffer state different */ |
| return count - tmp_count; |
| case 96: |
| /* not all buffers processed */ |
| qperf_inc(q, eqbs_partial); |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "EQBS part:%02x", |
| tmp_count); |
| return count - tmp_count; |
| case 97: |
| /* no buffer processed */ |
| DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS again:%2d", ccq); |
| goto again; |
| default: |
| DBF_ERROR("%4x ccq:%3d", SCH_NO(q), ccq); |
| DBF_ERROR("%4x EQBS ERROR", SCH_NO(q)); |
| DBF_ERROR("%3d%3d%2d", count, tmp_count, nr); |
| q->handler(q->irq_ptr->cdev, QDIO_ERROR_GET_BUF_STATE, q->nr, |
| q->first_to_check, count, q->irq_ptr->int_parm); |
| return 0; |
| } |
| } |
| |
| /** |
| * qdio_do_sqbs - set buffer states for QEBSM |
| * @q: queue to manipulate |
| * @state: new state of the buffers |
| * @start: first buffer number to change |
| * @count: how many buffers to change |
| * |
| * Returns the number of successfully changed buffers. |
| * Does retrying until the specified count of buffer states is set or an |
| * error occurs. |
| */ |
| static int qdio_do_sqbs(struct qdio_q *q, unsigned char state, int start, |
| int count) |
| { |
| unsigned int ccq = 0; |
| int tmp_count = count, tmp_start = start; |
| int nr = q->nr; |
| |
| if (!count) |
| return 0; |
| qperf_inc(q, sqbs); |
| |
| if (!q->is_input_q) |
| nr += q->irq_ptr->nr_input_qs; |
| again: |
| ccq = do_sqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count); |
| |
| switch (ccq) { |
| case 0: |
| case 32: |
| /* all done, or active buffer adapter-owned */ |
| WARN_ON_ONCE(tmp_count); |
| return count - tmp_count; |
| case 96: |
| /* not all buffers processed */ |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "SQBS again:%2d", ccq); |
| qperf_inc(q, sqbs_partial); |
| goto again; |
| default: |
| DBF_ERROR("%4x ccq:%3d", SCH_NO(q), ccq); |
| DBF_ERROR("%4x SQBS ERROR", SCH_NO(q)); |
| DBF_ERROR("%3d%3d%2d", count, tmp_count, nr); |
| q->handler(q->irq_ptr->cdev, QDIO_ERROR_SET_BUF_STATE, q->nr, |
| q->first_to_check, count, q->irq_ptr->int_parm); |
| return 0; |
| } |
| } |
| |
| /* |
| * Returns number of examined buffers and their common state in *state. |
| * Requested number of buffers-to-examine must be > 0. |
| */ |
| static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr, |
| unsigned char *state, unsigned int count, |
| int auto_ack, int merge_pending) |
| { |
| unsigned char __state = 0; |
| int i = 1; |
| |
| if (is_qebsm(q)) |
| return qdio_do_eqbs(q, state, bufnr, count, auto_ack); |
| |
| /* get initial state: */ |
| __state = q->slsb.val[bufnr]; |
| |
| /* Bail out early if there is no work on the queue: */ |
| if (__state & SLSB_OWNER_CU) |
| goto out; |
| |
| if (merge_pending && __state == SLSB_P_OUTPUT_PENDING) |
| __state = SLSB_P_OUTPUT_EMPTY; |
| |
| for (; i < count; i++) { |
| bufnr = next_buf(bufnr); |
| |
| /* merge PENDING into EMPTY: */ |
| if (merge_pending && |
| q->slsb.val[bufnr] == SLSB_P_OUTPUT_PENDING && |
| __state == SLSB_P_OUTPUT_EMPTY) |
| continue; |
| |
| /* stop if next state differs from initial state: */ |
| if (q->slsb.val[bufnr] != __state) |
| break; |
| } |
| |
| out: |
| *state = __state; |
| return i; |
| } |
| |
| static inline int get_buf_state(struct qdio_q *q, unsigned int bufnr, |
| unsigned char *state, int auto_ack) |
| { |
| return get_buf_states(q, bufnr, state, 1, auto_ack, 0); |
| } |
| |
| /* wrap-around safe setting of slsb states, returns number of changed buffers */ |
| static inline int set_buf_states(struct qdio_q *q, int bufnr, |
| unsigned char state, int count) |
| { |
| int i; |
| |
| if (is_qebsm(q)) |
| return qdio_do_sqbs(q, state, bufnr, count); |
| |
| /* Ensure that all preceding changes to the SBALs are visible: */ |
| mb(); |
| |
| for (i = 0; i < count; i++) { |
| WRITE_ONCE(q->slsb.val[bufnr], state); |
| bufnr = next_buf(bufnr); |
| } |
| |
| /* Make our SLSB changes visible: */ |
| mb(); |
| |
| return count; |
| } |
| |
| static inline int set_buf_state(struct qdio_q *q, int bufnr, |
| unsigned char state) |
| { |
| return set_buf_states(q, bufnr, state, 1); |
| } |
| |
| /* set slsb states to initial state */ |
| static void qdio_init_buf_states(struct qdio_irq *irq_ptr) |
| { |
| struct qdio_q *q; |
| int i; |
| |
| for_each_input_queue(irq_ptr, q, i) |
| set_buf_states(q, 0, SLSB_P_INPUT_NOT_INIT, |
| QDIO_MAX_BUFFERS_PER_Q); |
| for_each_output_queue(irq_ptr, q, i) |
| set_buf_states(q, 0, SLSB_P_OUTPUT_NOT_INIT, |
| QDIO_MAX_BUFFERS_PER_Q); |
| } |
| |
| static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output, |
| unsigned int input) |
| { |
| unsigned long schid = *((u32 *) &q->irq_ptr->schid); |
| unsigned int fc = QDIO_SIGA_SYNC; |
| int cc; |
| |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-s:%1d", q->nr); |
| qperf_inc(q, siga_sync); |
| |
| if (is_qebsm(q)) { |
| schid = q->irq_ptr->sch_token; |
| fc |= QDIO_SIGA_QEBSM_FLAG; |
| } |
| |
| cc = do_siga_sync(schid, output, input, fc); |
| if (unlikely(cc)) |
| DBF_ERROR("%4x SIGA-S:%2d", SCH_NO(q), cc); |
| return (cc) ? -EIO : 0; |
| } |
| |
| static inline int qdio_siga_sync_q(struct qdio_q *q) |
| { |
| if (q->is_input_q) |
| return qdio_siga_sync(q, 0, q->mask); |
| else |
| return qdio_siga_sync(q, q->mask, 0); |
| } |
| |
| static int qdio_siga_output(struct qdio_q *q, unsigned int count, |
| unsigned int *busy_bit, unsigned long aob) |
| { |
| unsigned long schid = *((u32 *) &q->irq_ptr->schid); |
| unsigned int fc = QDIO_SIGA_WRITE; |
| u64 start_time = 0; |
| int retries = 0, cc; |
| |
| if (queue_type(q) == QDIO_IQDIO_QFMT && !multicast_outbound(q)) { |
| if (count > 1) |
| fc = QDIO_SIGA_WRITEM; |
| else if (aob) |
| fc = QDIO_SIGA_WRITEQ; |
| } |
| |
| if (is_qebsm(q)) { |
| schid = q->irq_ptr->sch_token; |
| fc |= QDIO_SIGA_QEBSM_FLAG; |
| } |
| again: |
| cc = do_siga_output(schid, q->mask, busy_bit, fc, aob); |
| |
| /* hipersocket busy condition */ |
| if (unlikely(*busy_bit)) { |
| retries++; |
| |
| if (!start_time) { |
| start_time = get_tod_clock_fast(); |
| goto again; |
| } |
| if (get_tod_clock_fast() - start_time < QDIO_BUSY_BIT_PATIENCE) |
| goto again; |
| } |
| if (retries) { |
| DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, |
| "%4x cc2 BB1:%1d", SCH_NO(q), q->nr); |
| DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "count:%u", retries); |
| } |
| return cc; |
| } |
| |
| static inline int qdio_siga_input(struct qdio_q *q) |
| { |
| unsigned long schid = *((u32 *) &q->irq_ptr->schid); |
| unsigned int fc = QDIO_SIGA_READ; |
| int cc; |
| |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-r:%1d", q->nr); |
| qperf_inc(q, siga_read); |
| |
| if (is_qebsm(q)) { |
| schid = q->irq_ptr->sch_token; |
| fc |= QDIO_SIGA_QEBSM_FLAG; |
| } |
| |
| cc = do_siga_input(schid, q->mask, fc); |
| if (unlikely(cc)) |
| DBF_ERROR("%4x SIGA-R:%2d", SCH_NO(q), cc); |
| return (cc) ? -EIO : 0; |
| } |
| |
| #define qdio_siga_sync_out(q) qdio_siga_sync(q, ~0U, 0) |
| #define qdio_siga_sync_all(q) qdio_siga_sync(q, ~0U, ~0U) |
| |
| static inline void qdio_sync_queues(struct qdio_q *q) |
| { |
| /* PCI capable outbound queues will also be scanned so sync them too */ |
| if (pci_out_supported(q->irq_ptr)) |
| qdio_siga_sync_all(q); |
| else |
| qdio_siga_sync_q(q); |
| } |
| |
| int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr, |
| unsigned char *state) |
| { |
| if (need_siga_sync(q)) |
| qdio_siga_sync_q(q); |
| return get_buf_state(q, bufnr, state, 0); |
| } |
| |
| static inline void qdio_stop_polling(struct qdio_q *q) |
| { |
| if (!q->u.in.batch_count) |
| return; |
| |
| qperf_inc(q, stop_polling); |
| |
| /* show the card that we are not polling anymore */ |
| set_buf_states(q, q->u.in.batch_start, SLSB_P_INPUT_NOT_INIT, |
| q->u.in.batch_count); |
| q->u.in.batch_count = 0; |
| } |
| |
| static inline void account_sbals(struct qdio_q *q, unsigned int count) |
| { |
| q->q_stats.nr_sbal_total += count; |
| q->q_stats.nr_sbals[ilog2(count)]++; |
| } |
| |
| static void process_buffer_error(struct qdio_q *q, unsigned int start, |
| int count) |
| { |
| q->qdio_error = QDIO_ERROR_SLSB_STATE; |
| |
| /* special handling for no target buffer empty */ |
| if (queue_type(q) == QDIO_IQDIO_QFMT && !q->is_input_q && |
| q->sbal[start]->element[15].sflags == 0x10) { |
| qperf_inc(q, target_full); |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x", start); |
| return; |
| } |
| |
| DBF_ERROR("%4x BUF ERROR", SCH_NO(q)); |
| DBF_ERROR((q->is_input_q) ? "IN:%2d" : "OUT:%2d", q->nr); |
| DBF_ERROR("FTC:%3d C:%3d", start, count); |
| DBF_ERROR("F14:%2x F15:%2x", |
| q->sbal[start]->element[14].sflags, |
| q->sbal[start]->element[15].sflags); |
| } |
| |
| static inline void inbound_handle_work(struct qdio_q *q, unsigned int start, |
| int count, bool auto_ack) |
| { |
| /* ACK the newest SBAL: */ |
| if (!auto_ack) |
| set_buf_state(q, add_buf(start, count - 1), SLSB_P_INPUT_ACK); |
| |
| if (!q->u.in.batch_count) |
| q->u.in.batch_start = start; |
| q->u.in.batch_count += count; |
| } |
| |
| static int get_inbound_buffer_frontier(struct qdio_q *q, unsigned int start) |
| { |
| unsigned char state = 0; |
| int count; |
| |
| q->timestamp = get_tod_clock_fast(); |
| |
| count = atomic_read(&q->nr_buf_used); |
| if (!count) |
| return 0; |
| |
| /* |
| * No siga sync here, as a PCI or we after a thin interrupt |
| * already sync'ed the queues. |
| */ |
| count = get_buf_states(q, start, &state, count, 1, 0); |
| if (!count) |
| return 0; |
| |
| switch (state) { |
| case SLSB_P_INPUT_PRIMED: |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in prim:%1d %02x", q->nr, |
| count); |
| |
| inbound_handle_work(q, start, count, is_qebsm(q)); |
| if (atomic_sub_return(count, &q->nr_buf_used) == 0) |
| qperf_inc(q, inbound_queue_full); |
| if (q->irq_ptr->perf_stat_enabled) |
| account_sbals(q, count); |
| return count; |
| case SLSB_P_INPUT_ERROR: |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in err:%1d %02x", q->nr, |
| count); |
| |
| process_buffer_error(q, start, count); |
| inbound_handle_work(q, start, count, false); |
| if (atomic_sub_return(count, &q->nr_buf_used) == 0) |
| qperf_inc(q, inbound_queue_full); |
| if (q->irq_ptr->perf_stat_enabled) |
| account_sbals_error(q, count); |
| return count; |
| case SLSB_CU_INPUT_EMPTY: |
| if (q->irq_ptr->perf_stat_enabled) |
| q->q_stats.nr_sbal_nop++; |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in nop:%1d %#02x", |
| q->nr, start); |
| return 0; |
| case SLSB_P_INPUT_NOT_INIT: |
| case SLSB_P_INPUT_ACK: |
| /* We should never see this state, throw a WARN: */ |
| default: |
| dev_WARN_ONCE(&q->irq_ptr->cdev->dev, 1, |
| "found state %#x at index %u on queue %u\n", |
| state, start, q->nr); |
| return 0; |
| } |
| } |
| |
| static int qdio_inbound_q_moved(struct qdio_q *q, unsigned int start) |
| { |
| return get_inbound_buffer_frontier(q, start); |
| } |
| |
| static inline int qdio_inbound_q_done(struct qdio_q *q, unsigned int start) |
| { |
| unsigned char state = 0; |
| |
| if (!atomic_read(&q->nr_buf_used)) |
| return 1; |
| |
| if (need_siga_sync(q)) |
| qdio_siga_sync_q(q); |
| get_buf_state(q, start, &state, 0); |
| |
| if (state == SLSB_P_INPUT_PRIMED || state == SLSB_P_INPUT_ERROR) |
| /* more work coming */ |
| return 0; |
| |
| return 1; |
| } |
| |
| static inline unsigned long qdio_aob_for_buffer(struct qdio_output_q *q, |
| int bufnr) |
| { |
| unsigned long phys_aob = 0; |
| |
| if (!q->aobs[bufnr]) { |
| struct qaob *aob = qdio_allocate_aob(); |
| q->aobs[bufnr] = aob; |
| } |
| if (q->aobs[bufnr]) { |
| q->aobs[bufnr]->user1 = (u64) q->sbal_state[bufnr].user; |
| phys_aob = virt_to_phys(q->aobs[bufnr]); |
| WARN_ON_ONCE(phys_aob & 0xFF); |
| } |
| |
| q->sbal_state[bufnr].flags = 0; |
| return phys_aob; |
| } |
| |
| static void qdio_kick_handler(struct qdio_q *q, unsigned int start, |
| unsigned int count) |
| { |
| if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) |
| return; |
| |
| if (q->is_input_q) { |
| qperf_inc(q, inbound_handler); |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%02x c:%02x", start, count); |
| } else { |
| qperf_inc(q, outbound_handler); |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: s:%02x c:%02x", |
| start, count); |
| } |
| |
| q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count, |
| q->irq_ptr->int_parm); |
| |
| /* for the next time */ |
| q->qdio_error = 0; |
| } |
| |
| static inline int qdio_tasklet_schedule(struct qdio_q *q) |
| { |
| if (likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) { |
| tasklet_schedule(&q->tasklet); |
| return 0; |
| } |
| return -EPERM; |
| } |
| |
| static void __qdio_inbound_processing(struct qdio_q *q) |
| { |
| unsigned int start = q->first_to_check; |
| int count; |
| |
| qperf_inc(q, tasklet_inbound); |
| |
| count = qdio_inbound_q_moved(q, start); |
| if (count == 0) |
| return; |
| |
| qdio_kick_handler(q, start, count); |
| start = add_buf(start, count); |
| q->first_to_check = start; |
| |
| if (!qdio_inbound_q_done(q, start)) { |
| /* means poll time is not yet over */ |
| qperf_inc(q, tasklet_inbound_resched); |
| if (!qdio_tasklet_schedule(q)) |
| return; |
| } |
| |
| qdio_stop_polling(q); |
| /* |
| * We need to check again to not lose initiative after |
| * resetting the ACK state. |
| */ |
| if (!qdio_inbound_q_done(q, start)) { |
| qperf_inc(q, tasklet_inbound_resched2); |
| qdio_tasklet_schedule(q); |
| } |
| } |
| |
| void qdio_inbound_processing(unsigned long data) |
| { |
| struct qdio_q *q = (struct qdio_q *)data; |
| __qdio_inbound_processing(q); |
| } |
| |
| static void qdio_check_pending(struct qdio_q *q, unsigned int index) |
| { |
| unsigned char state; |
| |
| if (get_buf_state(q, index, &state, 0) > 0 && |
| state == SLSB_P_OUTPUT_PENDING && |
| q->u.out.aobs[index]) { |
| q->u.out.sbal_state[index].flags |= |
| QDIO_OUTBUF_STATE_FLAG_PENDING; |
| q->u.out.aobs[index] = NULL; |
| } |
| } |
| |
| static int get_outbound_buffer_frontier(struct qdio_q *q, unsigned int start) |
| { |
| unsigned char state = 0; |
| int count; |
| |
| q->timestamp = get_tod_clock_fast(); |
| |
| if (need_siga_sync(q)) |
| if (((queue_type(q) != QDIO_IQDIO_QFMT) && |
| !pci_out_supported(q->irq_ptr)) || |
| (queue_type(q) == QDIO_IQDIO_QFMT && |
| multicast_outbound(q))) |
| qdio_siga_sync_q(q); |
| |
| count = atomic_read(&q->nr_buf_used); |
| if (!count) |
| return 0; |
| |
| count = get_buf_states(q, start, &state, count, 0, q->u.out.use_cq); |
| if (!count) |
| return 0; |
| |
| switch (state) { |
| case SLSB_P_OUTPUT_EMPTY: |
| case SLSB_P_OUTPUT_PENDING: |
| /* the adapter got it */ |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, |
| "out empty:%1d %02x", q->nr, count); |
| |
| atomic_sub(count, &q->nr_buf_used); |
| if (q->irq_ptr->perf_stat_enabled) |
| account_sbals(q, count); |
| return count; |
| case SLSB_P_OUTPUT_ERROR: |
| process_buffer_error(q, start, count); |
| atomic_sub(count, &q->nr_buf_used); |
| if (q->irq_ptr->perf_stat_enabled) |
| account_sbals_error(q, count); |
| return count; |
| case SLSB_CU_OUTPUT_PRIMED: |
| /* the adapter has not fetched the output yet */ |
| if (q->irq_ptr->perf_stat_enabled) |
| q->q_stats.nr_sbal_nop++; |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out primed:%1d", |
| q->nr); |
| return 0; |
| case SLSB_P_OUTPUT_HALTED: |
| return 0; |
| case SLSB_P_OUTPUT_NOT_INIT: |
| /* We should never see this state, throw a WARN: */ |
| default: |
| dev_WARN_ONCE(&q->irq_ptr->cdev->dev, 1, |
| "found state %#x at index %u on queue %u\n", |
| state, start, q->nr); |
| return 0; |
| } |
| } |
| |
| /* all buffers processed? */ |
| static inline int qdio_outbound_q_done(struct qdio_q *q) |
| { |
| return atomic_read(&q->nr_buf_used) == 0; |
| } |
| |
| static inline int qdio_outbound_q_moved(struct qdio_q *q, unsigned int start) |
| { |
| int count; |
| |
| count = get_outbound_buffer_frontier(q, start); |
| |
| if (count) { |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out moved:%1d", q->nr); |
| |
| if (q->u.out.use_cq) { |
| unsigned int i; |
| |
| for (i = 0; i < count; i++) |
| qdio_check_pending(q, QDIO_BUFNR(start + i)); |
| } |
| } |
| |
| return count; |
| } |
| |
| static int qdio_kick_outbound_q(struct qdio_q *q, unsigned int count, |
| unsigned long aob) |
| { |
| int retries = 0, cc; |
| unsigned int busy_bit; |
| |
| if (!need_siga_out(q)) |
| return 0; |
| |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w:%1d", q->nr); |
| retry: |
| qperf_inc(q, siga_write); |
| |
| cc = qdio_siga_output(q, count, &busy_bit, aob); |
| switch (cc) { |
| case 0: |
| break; |
| case 2: |
| if (busy_bit) { |
| while (++retries < QDIO_BUSY_BIT_RETRIES) { |
| mdelay(QDIO_BUSY_BIT_RETRY_DELAY); |
| goto retry; |
| } |
| DBF_ERROR("%4x cc2 BBC:%1d", SCH_NO(q), q->nr); |
| cc = -EBUSY; |
| } else { |
| DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w cc2:%1d", q->nr); |
| cc = -ENOBUFS; |
| } |
| break; |
| case 1: |
| case 3: |
| DBF_ERROR("%4x SIGA-W:%1d", SCH_NO(q), cc); |
| cc = -EIO; |
| break; |
| } |
| if (retries) { |
| DBF_ERROR("%4x cc2 BB2:%1d", SCH_NO(q), q->nr); |
| DBF_ERROR("count:%u", retries); |
| } |
| return cc; |
| } |
| |
| static void __qdio_outbound_processing(struct qdio_q *q) |
| { |
| unsigned int start = q->first_to_check; |
| int count; |
| |
| qperf_inc(q, tasklet_outbound); |
| WARN_ON_ONCE(atomic_read(&q->nr_buf_used) < 0); |
| |
| count = qdio_outbound_q_moved(q, start); |
| if (count) { |
| q->first_to_check = add_buf(start, count); |
| qdio_kick_handler(q, start, count); |
| } |
| |
| if (queue_type(q) == QDIO_ZFCP_QFMT && !pci_out_supported(q->irq_ptr) && |
| !qdio_outbound_q_done(q)) |
| goto sched; |
| |
| if (q->u.out.pci_out_enabled) |
| return; |
| |
| /* |
| * Now we know that queue type is either qeth without pci enabled |
| * or HiperSockets. Make sure buffer switch from PRIMED to EMPTY |
| * is noticed and outbound_handler is called after some time. |
| */ |
| if (qdio_outbound_q_done(q)) |
| del_timer_sync(&q->u.out.timer); |
| else |
| if (!timer_pending(&q->u.out.timer) && |
| likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) |
| mod_timer(&q->u.out.timer, jiffies + 10 * HZ); |
| return; |
| |
| sched: |
| qdio_tasklet_schedule(q); |
| } |
| |
| /* outbound tasklet */ |
| void qdio_outbound_processing(unsigned long data) |
| { |
| struct qdio_q *q = (struct qdio_q *)data; |
| __qdio_outbound_processing(q); |
| } |
| |
| void qdio_outbound_timer(struct timer_list *t) |
| { |
| struct qdio_q *q = from_timer(q, t, u.out.timer); |
| |
| qdio_tasklet_schedule(q); |
| } |
| |
| static inline void qdio_check_outbound_pci_queues(struct qdio_irq *irq) |
| { |
| struct qdio_q *out; |
| int i; |
| |
| if (!pci_out_supported(irq) || !irq->scan_threshold) |
| return; |
| |
| for_each_output_queue(irq, out, i) |
| if (!qdio_outbound_q_done(out)) |
| qdio_tasklet_schedule(out); |
| } |
| |
| void tiqdio_inbound_processing(unsigned long data) |
| { |
| struct qdio_q *q = (struct qdio_q *)data; |
| |
| if (need_siga_sync(q) && need_siga_sync_after_ai(q)) |
| qdio_sync_queues(q); |
| |
| /* The interrupt could be caused by a PCI request: */ |
| qdio_check_outbound_pci_queues(q->irq_ptr); |
| |
| __qdio_inbound_processing(q); |
| } |
| |
| static inline void qdio_set_state(struct qdio_irq *irq_ptr, |
| enum qdio_irq_states state) |
| { |
| DBF_DEV_EVENT(DBF_INFO, irq_ptr, "newstate: %1d", state); |
| |
| irq_ptr->state = state; |
| mb(); |
| } |
| |
| static void qdio_irq_check_sense(struct qdio_irq *irq_ptr, struct irb *irb) |
| { |
| if (irb->esw.esw0.erw.cons) { |
| DBF_ERROR("%4x sense:", irq_ptr->schid.sch_no); |
| DBF_ERROR_HEX(irb, 64); |
| DBF_ERROR_HEX(irb->ecw, 64); |
| } |
| } |
| |
| /* PCI interrupt handler */ |
| static void qdio_int_handler_pci(struct qdio_irq *irq_ptr) |
| { |
| int i; |
| struct qdio_q *q; |
| |
| if (unlikely(irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) |
| return; |
| |
| if (irq_ptr->irq_poll) { |
| if (!test_and_set_bit(QDIO_IRQ_DISABLED, &irq_ptr->poll_state)) |
| irq_ptr->irq_poll(irq_ptr->cdev, irq_ptr->int_parm); |
| else |
| QDIO_PERF_STAT_INC(irq_ptr, int_discarded); |
| } else { |
| for_each_input_queue(irq_ptr, q, i) |
| tasklet_schedule(&q->tasklet); |
| } |
| |
| if (!pci_out_supported(irq_ptr) || !irq_ptr->scan_threshold) |
| return; |
| |
| for_each_output_queue(irq_ptr, q, i) { |
| if (qdio_outbound_q_done(q)) |
| continue; |
| if (need_siga_sync(q) && need_siga_sync_out_after_pci(q)) |
| qdio_siga_sync_q(q); |
| qdio_tasklet_schedule(q); |
| } |
| } |
| |
| static void qdio_handle_activate_check(struct qdio_irq *irq_ptr, |
| unsigned long intparm, int cstat, |
| int dstat) |
| { |
| struct qdio_q *q; |
| |
| DBF_ERROR("%4x ACT CHECK", irq_ptr->schid.sch_no); |
| DBF_ERROR("intp :%lx", intparm); |
| DBF_ERROR("ds: %2x cs:%2x", dstat, cstat); |
| |
| if (irq_ptr->nr_input_qs) { |
| q = irq_ptr->input_qs[0]; |
| } else if (irq_ptr->nr_output_qs) { |
| q = irq_ptr->output_qs[0]; |
| } else { |
| dump_stack(); |
| goto no_handler; |
| } |
| |
| q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE, |
| q->nr, q->first_to_check, 0, irq_ptr->int_parm); |
| no_handler: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); |
| /* |
| * In case of z/VM LGR (Live Guest Migration) QDIO recovery will happen. |
| * Therefore we call the LGR detection function here. |
| */ |
| lgr_info_log(); |
| } |
| |
| static void qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat, |
| int dstat) |
| { |
| DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq"); |
| |
| if (cstat) |
| goto error; |
| if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END)) |
| goto error; |
| if (!(dstat & DEV_STAT_DEV_END)) |
| goto error; |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED); |
| return; |
| |
| error: |
| DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no); |
| DBF_ERROR("ds: %2x cs:%2x", dstat, cstat); |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); |
| } |
| |
| /* qdio interrupt handler */ |
| void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, |
| struct irb *irb) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct subchannel_id schid; |
| int cstat, dstat; |
| |
| if (!intparm || !irq_ptr) { |
| ccw_device_get_schid(cdev, &schid); |
| DBF_ERROR("qint:%4x", schid.sch_no); |
| return; |
| } |
| |
| if (irq_ptr->perf_stat_enabled) |
| irq_ptr->perf_stat.qdio_int++; |
| |
| if (IS_ERR(irb)) { |
| DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no); |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); |
| wake_up(&cdev->private->wait_q); |
| return; |
| } |
| qdio_irq_check_sense(irq_ptr, irb); |
| cstat = irb->scsw.cmd.cstat; |
| dstat = irb->scsw.cmd.dstat; |
| |
| switch (irq_ptr->state) { |
| case QDIO_IRQ_STATE_INACTIVE: |
| qdio_establish_handle_irq(irq_ptr, cstat, dstat); |
| break; |
| case QDIO_IRQ_STATE_CLEANUP: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); |
| break; |
| case QDIO_IRQ_STATE_ESTABLISHED: |
| case QDIO_IRQ_STATE_ACTIVE: |
| if (cstat & SCHN_STAT_PCI) { |
| qdio_int_handler_pci(irq_ptr); |
| return; |
| } |
| if (cstat || dstat) |
| qdio_handle_activate_check(irq_ptr, intparm, cstat, |
| dstat); |
| break; |
| case QDIO_IRQ_STATE_STOPPED: |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| } |
| wake_up(&cdev->private->wait_q); |
| } |
| |
| /** |
| * qdio_get_ssqd_desc - get qdio subchannel description |
| * @cdev: ccw device to get description for |
| * @data: where to store the ssqd |
| * |
| * Returns 0 or an error code. The results of the chsc are stored in the |
| * specified structure. |
| */ |
| int qdio_get_ssqd_desc(struct ccw_device *cdev, |
| struct qdio_ssqd_desc *data) |
| { |
| struct subchannel_id schid; |
| |
| if (!cdev || !cdev->private) |
| return -EINVAL; |
| |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("get ssqd:%4x", schid.sch_no); |
| return qdio_setup_get_ssqd(NULL, &schid, data); |
| } |
| EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc); |
| |
| static void qdio_shutdown_queues(struct qdio_irq *irq_ptr) |
| { |
| struct qdio_q *q; |
| int i; |
| |
| for_each_input_queue(irq_ptr, q, i) |
| tasklet_kill(&q->tasklet); |
| |
| for_each_output_queue(irq_ptr, q, i) { |
| del_timer_sync(&q->u.out.timer); |
| tasklet_kill(&q->tasklet); |
| } |
| } |
| |
| /** |
| * qdio_shutdown - shut down a qdio subchannel |
| * @cdev: associated ccw device |
| * @how: use halt or clear to shutdown |
| */ |
| int qdio_shutdown(struct ccw_device *cdev, int how) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct subchannel_id schid; |
| int rc; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| WARN_ON_ONCE(irqs_disabled()); |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("qshutdown:%4x", schid.sch_no); |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| /* |
| * Subchannel was already shot down. We cannot prevent being called |
| * twice since cio may trigger a shutdown asynchronously. |
| */ |
| if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { |
| mutex_unlock(&irq_ptr->setup_mutex); |
| return 0; |
| } |
| |
| /* |
| * Indicate that the device is going down. Scheduling the queue |
| * tasklets is forbidden from here on. |
| */ |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); |
| |
| tiqdio_remove_device(irq_ptr); |
| qdio_shutdown_queues(irq_ptr); |
| qdio_shutdown_debug_entries(irq_ptr); |
| |
| /* cleanup subchannel */ |
| spin_lock_irq(get_ccwdev_lock(cdev)); |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP); |
| if (how & QDIO_FLAG_CLEANUP_USING_CLEAR) |
| rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP); |
| else |
| /* default behaviour is halt */ |
| rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP); |
| spin_unlock_irq(get_ccwdev_lock(cdev)); |
| if (rc) { |
| DBF_ERROR("%4x SHUTD ERR", irq_ptr->schid.sch_no); |
| DBF_ERROR("rc:%4d", rc); |
| goto no_cleanup; |
| } |
| |
| wait_event_interruptible_timeout(cdev->private->wait_q, |
| irq_ptr->state == QDIO_IRQ_STATE_INACTIVE || |
| irq_ptr->state == QDIO_IRQ_STATE_ERR, |
| 10 * HZ); |
| |
| no_cleanup: |
| qdio_shutdown_thinint(irq_ptr); |
| qdio_shutdown_irq(irq_ptr); |
| |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); |
| mutex_unlock(&irq_ptr->setup_mutex); |
| if (rc) |
| return rc; |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(qdio_shutdown); |
| |
| /** |
| * qdio_free - free data structures for a qdio subchannel |
| * @cdev: associated ccw device |
| */ |
| int qdio_free(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct subchannel_id schid; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("qfree:%4x", schid.sch_no); |
| DBF_DEV_EVENT(DBF_ERR, irq_ptr, "dbf abandoned"); |
| mutex_lock(&irq_ptr->setup_mutex); |
| |
| irq_ptr->debug_area = NULL; |
| cdev->private->qdio_data = NULL; |
| mutex_unlock(&irq_ptr->setup_mutex); |
| |
| qdio_free_async_data(irq_ptr); |
| qdio_free_queues(irq_ptr); |
| free_page((unsigned long) irq_ptr->qdr); |
| free_page(irq_ptr->chsc_page); |
| free_page((unsigned long) irq_ptr); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(qdio_free); |
| |
| /** |
| * qdio_allocate - allocate qdio queues and associated data |
| * @cdev: associated ccw device |
| * @no_input_qs: allocate this number of Input Queues |
| * @no_output_qs: allocate this number of Output Queues |
| */ |
| int qdio_allocate(struct ccw_device *cdev, unsigned int no_input_qs, |
| unsigned int no_output_qs) |
| { |
| struct subchannel_id schid; |
| struct qdio_irq *irq_ptr; |
| int rc = -ENOMEM; |
| |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("qallocate:%4x", schid.sch_no); |
| |
| if (no_input_qs > QDIO_MAX_QUEUES_PER_IRQ || |
| no_output_qs > QDIO_MAX_QUEUES_PER_IRQ) |
| return -EINVAL; |
| |
| /* irq_ptr must be in GFP_DMA since it contains ccw1.cda */ |
| irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!irq_ptr) |
| return -ENOMEM; |
| |
| irq_ptr->cdev = cdev; |
| mutex_init(&irq_ptr->setup_mutex); |
| if (qdio_allocate_dbf(irq_ptr)) |
| goto err_dbf; |
| |
| DBF_DEV_EVENT(DBF_ERR, irq_ptr, "alloc niq:%1u noq:%1u", no_input_qs, |
| no_output_qs); |
| |
| /* |
| * Allocate a page for the chsc calls in qdio_establish. |
| * Must be pre-allocated since a zfcp recovery will call |
| * qdio_establish. In case of low memory and swap on a zfcp disk |
| * we may not be able to allocate memory otherwise. |
| */ |
| irq_ptr->chsc_page = get_zeroed_page(GFP_KERNEL); |
| if (!irq_ptr->chsc_page) |
| goto err_chsc; |
| |
| /* qdr is used in ccw1.cda which is u32 */ |
| irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!irq_ptr->qdr) |
| goto err_qdr; |
| |
| rc = qdio_allocate_qs(irq_ptr, no_input_qs, no_output_qs); |
| if (rc) |
| goto err_queues; |
| |
| INIT_LIST_HEAD(&irq_ptr->entry); |
| cdev->private->qdio_data = irq_ptr; |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); |
| return 0; |
| |
| err_queues: |
| free_page((unsigned long) irq_ptr->qdr); |
| err_qdr: |
| free_page(irq_ptr->chsc_page); |
| err_chsc: |
| err_dbf: |
| free_page((unsigned long) irq_ptr); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(qdio_allocate); |
| |
| static void qdio_detect_hsicq(struct qdio_irq *irq_ptr) |
| { |
| struct qdio_q *q = irq_ptr->input_qs[0]; |
| int i, use_cq = 0; |
| |
| if (irq_ptr->nr_input_qs > 1 && queue_type(q) == QDIO_IQDIO_QFMT) |
| use_cq = 1; |
| |
| for_each_output_queue(irq_ptr, q, i) { |
| if (use_cq) { |
| if (multicast_outbound(q)) |
| continue; |
| if (qdio_enable_async_operation(&q->u.out) < 0) { |
| use_cq = 0; |
| continue; |
| } |
| } else |
| qdio_disable_async_operation(&q->u.out); |
| } |
| DBF_EVENT("use_cq:%d", use_cq); |
| } |
| |
| static void qdio_trace_init_data(struct qdio_irq *irq, |
| struct qdio_initialize *data) |
| { |
| DBF_DEV_EVENT(DBF_ERR, irq, "qfmt:%1u", data->q_format); |
| DBF_DEV_EVENT(DBF_ERR, irq, "qpff%4x", data->qib_param_field_format); |
| DBF_DEV_HEX(irq, &data->qib_param_field, sizeof(void *), DBF_ERR); |
| DBF_DEV_HEX(irq, &data->input_slib_elements, sizeof(void *), DBF_ERR); |
| DBF_DEV_HEX(irq, &data->output_slib_elements, sizeof(void *), DBF_ERR); |
| DBF_DEV_EVENT(DBF_ERR, irq, "niq:%1u noq:%1u", data->no_input_qs, |
| data->no_output_qs); |
| DBF_DEV_HEX(irq, &data->input_handler, sizeof(void *), DBF_ERR); |
| DBF_DEV_HEX(irq, &data->output_handler, sizeof(void *), DBF_ERR); |
| DBF_DEV_HEX(irq, &data->int_parm, sizeof(long), DBF_ERR); |
| DBF_DEV_HEX(irq, &data->input_sbal_addr_array, sizeof(void *), DBF_ERR); |
| DBF_DEV_HEX(irq, &data->output_sbal_addr_array, sizeof(void *), |
| DBF_ERR); |
| } |
| |
| /** |
| * qdio_establish - establish queues on a qdio subchannel |
| * @cdev: associated ccw device |
| * @init_data: initialization data |
| */ |
| int qdio_establish(struct ccw_device *cdev, |
| struct qdio_initialize *init_data) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct subchannel_id schid; |
| int rc; |
| |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("qestablish:%4x", schid.sch_no); |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| if (init_data->no_input_qs > irq_ptr->max_input_qs || |
| init_data->no_output_qs > irq_ptr->max_output_qs) |
| return -EINVAL; |
| |
| if ((init_data->no_input_qs && !init_data->input_handler) || |
| (init_data->no_output_qs && !init_data->output_handler)) |
| return -EINVAL; |
| |
| if (!init_data->input_sbal_addr_array || |
| !init_data->output_sbal_addr_array) |
| return -EINVAL; |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| qdio_trace_init_data(irq_ptr, init_data); |
| qdio_setup_irq(irq_ptr, init_data); |
| |
| rc = qdio_establish_thinint(irq_ptr); |
| if (rc) { |
| qdio_shutdown_irq(irq_ptr); |
| mutex_unlock(&irq_ptr->setup_mutex); |
| return rc; |
| } |
| |
| /* establish q */ |
| irq_ptr->ccw.cmd_code = irq_ptr->equeue.cmd; |
| irq_ptr->ccw.flags = CCW_FLAG_SLI; |
| irq_ptr->ccw.count = irq_ptr->equeue.count; |
| irq_ptr->ccw.cda = (u32)((addr_t)irq_ptr->qdr); |
| |
| spin_lock_irq(get_ccwdev_lock(cdev)); |
| ccw_device_set_options_mask(cdev, 0); |
| |
| rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0); |
| spin_unlock_irq(get_ccwdev_lock(cdev)); |
| if (rc) { |
| DBF_ERROR("%4x est IO ERR", irq_ptr->schid.sch_no); |
| DBF_ERROR("rc:%4x", rc); |
| qdio_shutdown_thinint(irq_ptr); |
| qdio_shutdown_irq(irq_ptr); |
| mutex_unlock(&irq_ptr->setup_mutex); |
| return rc; |
| } |
| |
| wait_event_interruptible_timeout(cdev->private->wait_q, |
| irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED || |
| irq_ptr->state == QDIO_IRQ_STATE_ERR, HZ); |
| |
| if (irq_ptr->state != QDIO_IRQ_STATE_ESTABLISHED) { |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); |
| return -EIO; |
| } |
| |
| qdio_setup_ssqd_info(irq_ptr); |
| |
| qdio_detect_hsicq(irq_ptr); |
| |
| /* qebsm is now setup if available, initialize buffer states */ |
| qdio_init_buf_states(irq_ptr); |
| |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_print_subchannel_info(irq_ptr); |
| qdio_setup_debug_entries(irq_ptr); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(qdio_establish); |
| |
| /** |
| * qdio_activate - activate queues on a qdio subchannel |
| * @cdev: associated cdev |
| */ |
| int qdio_activate(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct subchannel_id schid; |
| int rc; |
| |
| ccw_device_get_schid(cdev, &schid); |
| DBF_EVENT("qactivate:%4x", schid.sch_no); |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd; |
| irq_ptr->ccw.flags = CCW_FLAG_SLI; |
| irq_ptr->ccw.count = irq_ptr->aqueue.count; |
| irq_ptr->ccw.cda = 0; |
| |
| spin_lock_irq(get_ccwdev_lock(cdev)); |
| ccw_device_set_options(cdev, CCWDEV_REPORT_ALL); |
| |
| rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE, |
| 0, DOIO_DENY_PREFETCH); |
| spin_unlock_irq(get_ccwdev_lock(cdev)); |
| if (rc) { |
| DBF_ERROR("%4x act IO ERR", irq_ptr->schid.sch_no); |
| DBF_ERROR("rc:%4x", rc); |
| goto out; |
| } |
| |
| if (is_thinint_irq(irq_ptr)) |
| tiqdio_add_device(irq_ptr); |
| |
| /* wait for subchannel to become active */ |
| msleep(5); |
| |
| switch (irq_ptr->state) { |
| case QDIO_IRQ_STATE_STOPPED: |
| case QDIO_IRQ_STATE_ERR: |
| rc = -EIO; |
| break; |
| default: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ACTIVE); |
| rc = 0; |
| } |
| out: |
| mutex_unlock(&irq_ptr->setup_mutex); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(qdio_activate); |
| |
| /** |
| * handle_inbound - reset processed input buffers |
| * @q: queue containing the buffers |
| * @callflags: flags |
| * @bufnr: first buffer to process |
| * @count: how many buffers are emptied |
| */ |
| static int handle_inbound(struct qdio_q *q, unsigned int callflags, |
| int bufnr, int count) |
| { |
| int overlap; |
| |
| qperf_inc(q, inbound_call); |
| |
| /* If any processed SBALs are returned to HW, adjust our tracking: */ |
| overlap = min_t(int, count - sub_buf(q->u.in.batch_start, bufnr), |
| q->u.in.batch_count); |
| if (overlap > 0) { |
| q->u.in.batch_start = add_buf(q->u.in.batch_start, overlap); |
| q->u.in.batch_count -= overlap; |
| } |
| |
| count = set_buf_states(q, bufnr, SLSB_CU_INPUT_EMPTY, count); |
| atomic_add(count, &q->nr_buf_used); |
| |
| if (need_siga_in(q)) |
| return qdio_siga_input(q); |
| |
| return 0; |
| } |
| |
| /** |
| * handle_outbound - process filled outbound buffers |
| * @q: queue containing the buffers |
| * @callflags: flags |
| * @bufnr: first buffer to process |
| * @count: how many buffers are filled |
| */ |
| static int handle_outbound(struct qdio_q *q, unsigned int callflags, |
| unsigned int bufnr, unsigned int count) |
| { |
| const unsigned int scan_threshold = q->irq_ptr->scan_threshold; |
| unsigned char state = 0; |
| int used, rc = 0; |
| |
| qperf_inc(q, outbound_call); |
| |
| count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count); |
| used = atomic_add_return(count, &q->nr_buf_used); |
| |
| if (used == QDIO_MAX_BUFFERS_PER_Q) |
| qperf_inc(q, outbound_queue_full); |
| |
| if (callflags & QDIO_FLAG_PCI_OUT) { |
| q->u.out.pci_out_enabled = 1; |
| qperf_inc(q, pci_request_int); |
| } else |
| q->u.out.pci_out_enabled = 0; |
| |
| if (queue_type(q) == QDIO_IQDIO_QFMT) { |
| unsigned long phys_aob = 0; |
| |
| if (q->u.out.use_cq && count == 1) |
| phys_aob = qdio_aob_for_buffer(&q->u.out, bufnr); |
| |
| rc = qdio_kick_outbound_q(q, count, phys_aob); |
| } else if (need_siga_sync(q)) { |
| rc = qdio_siga_sync_q(q); |
| } else if (count < QDIO_MAX_BUFFERS_PER_Q && |
| get_buf_state(q, prev_buf(bufnr), &state, 0) > 0 && |
| state == SLSB_CU_OUTPUT_PRIMED) { |
| /* The previous buffer is not processed yet, tack on. */ |
| qperf_inc(q, fast_requeue); |
| } else { |
| rc = qdio_kick_outbound_q(q, count, 0); |
| } |
| |
| /* Let drivers implement their own completion scanning: */ |
| if (!scan_threshold) |
| return rc; |
| |
| /* in case of SIGA errors we must process the error immediately */ |
| if (used >= scan_threshold || rc) |
| qdio_tasklet_schedule(q); |
| else |
| /* free the SBALs in case of no further traffic */ |
| if (!timer_pending(&q->u.out.timer) && |
| likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) |
| mod_timer(&q->u.out.timer, jiffies + HZ); |
| return rc; |
| } |
| |
| /** |
| * do_QDIO - process input or output buffers |
| * @cdev: associated ccw_device for the qdio subchannel |
| * @callflags: input or output and special flags from the program |
| * @q_nr: queue number |
| * @bufnr: buffer number |
| * @count: how many buffers to process |
| */ |
| int do_QDIO(struct ccw_device *cdev, unsigned int callflags, |
| int q_nr, unsigned int bufnr, unsigned int count) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| |
| if (bufnr >= QDIO_MAX_BUFFERS_PER_Q || count > QDIO_MAX_BUFFERS_PER_Q) |
| return -EINVAL; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| DBF_DEV_EVENT(DBF_INFO, irq_ptr, |
| "do%02x b:%02x c:%02x", callflags, bufnr, count); |
| |
| if (irq_ptr->state != QDIO_IRQ_STATE_ACTIVE) |
| return -EIO; |
| if (!count) |
| return 0; |
| if (callflags & QDIO_FLAG_SYNC_INPUT) |
| return handle_inbound(irq_ptr->input_qs[q_nr], |
| callflags, bufnr, count); |
| else if (callflags & QDIO_FLAG_SYNC_OUTPUT) |
| return handle_outbound(irq_ptr->output_qs[q_nr], |
| callflags, bufnr, count); |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL_GPL(do_QDIO); |
| |
| /** |
| * qdio_start_irq - enable interrupt processing for the device |
| * @cdev: associated ccw_device for the qdio subchannel |
| * |
| * Return codes |
| * 0 - success |
| * 1 - irqs not started since new data is available |
| */ |
| int qdio_start_irq(struct ccw_device *cdev) |
| { |
| struct qdio_q *q; |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| unsigned int i; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| for_each_input_queue(irq_ptr, q, i) |
| qdio_stop_polling(q); |
| |
| clear_bit(QDIO_IRQ_DISABLED, &irq_ptr->poll_state); |
| |
| /* |
| * We need to check again to not lose initiative after |
| * resetting the ACK state. |
| */ |
| if (test_nonshared_ind(irq_ptr)) |
| goto rescan; |
| |
| for_each_input_queue(irq_ptr, q, i) { |
| if (!qdio_inbound_q_done(q, q->first_to_check)) |
| goto rescan; |
| } |
| |
| return 0; |
| |
| rescan: |
| if (test_and_set_bit(QDIO_IRQ_DISABLED, &irq_ptr->poll_state)) |
| return 0; |
| else |
| return 1; |
| |
| } |
| EXPORT_SYMBOL(qdio_start_irq); |
| |
| static int __qdio_inspect_queue(struct qdio_q *q, unsigned int *bufnr, |
| unsigned int *error) |
| { |
| unsigned int start = q->first_to_check; |
| int count; |
| |
| count = q->is_input_q ? qdio_inbound_q_moved(q, start) : |
| qdio_outbound_q_moved(q, start); |
| if (count == 0) |
| return 0; |
| |
| *bufnr = start; |
| *error = q->qdio_error; |
| |
| /* for the next time */ |
| q->first_to_check = add_buf(start, count); |
| q->qdio_error = 0; |
| |
| return count; |
| } |
| |
| int qdio_inspect_queue(struct ccw_device *cdev, unsigned int nr, bool is_input, |
| unsigned int *bufnr, unsigned int *error) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct qdio_q *q; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| q = is_input ? irq_ptr->input_qs[nr] : irq_ptr->output_qs[nr]; |
| |
| if (need_siga_sync(q)) |
| qdio_siga_sync_q(q); |
| |
| return __qdio_inspect_queue(q, bufnr, error); |
| } |
| EXPORT_SYMBOL_GPL(qdio_inspect_queue); |
| |
| /** |
| * qdio_get_next_buffers - process input buffers |
| * @cdev: associated ccw_device for the qdio subchannel |
| * @nr: input queue number |
| * @bufnr: first filled buffer number |
| * @error: buffers are in error state |
| * |
| * Return codes |
| * < 0 - error |
| * = 0 - no new buffers found |
| * > 0 - number of processed buffers |
| */ |
| int qdio_get_next_buffers(struct ccw_device *cdev, int nr, int *bufnr, |
| int *error) |
| { |
| struct qdio_q *q; |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| q = irq_ptr->input_qs[nr]; |
| |
| /* |
| * Cannot rely on automatic sync after interrupt since queues may |
| * also be examined without interrupt. |
| */ |
| if (need_siga_sync(q)) |
| qdio_sync_queues(q); |
| |
| qdio_check_outbound_pci_queues(irq_ptr); |
| |
| /* Note: upper-layer MUST stop processing immediately here ... */ |
| if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) |
| return -EIO; |
| |
| return __qdio_inspect_queue(q, bufnr, error); |
| } |
| EXPORT_SYMBOL(qdio_get_next_buffers); |
| |
| /** |
| * qdio_stop_irq - disable interrupt processing for the device |
| * @cdev: associated ccw_device for the qdio subchannel |
| * |
| * Return codes |
| * 0 - interrupts were already disabled |
| * 1 - interrupts successfully disabled |
| */ |
| int qdio_stop_irq(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| if (test_and_set_bit(QDIO_IRQ_DISABLED, &irq_ptr->poll_state)) |
| return 0; |
| else |
| return 1; |
| } |
| EXPORT_SYMBOL(qdio_stop_irq); |
| |
| static int __init init_QDIO(void) |
| { |
| int rc; |
| |
| rc = qdio_debug_init(); |
| if (rc) |
| return rc; |
| rc = qdio_setup_init(); |
| if (rc) |
| goto out_debug; |
| rc = qdio_thinint_init(); |
| if (rc) |
| goto out_cache; |
| return 0; |
| |
| out_cache: |
| qdio_setup_exit(); |
| out_debug: |
| qdio_debug_exit(); |
| return rc; |
| } |
| |
| static void __exit exit_QDIO(void) |
| { |
| qdio_thinint_exit(); |
| qdio_setup_exit(); |
| qdio_debug_exit(); |
| } |
| |
| module_init(init_QDIO); |
| module_exit(exit_QDIO); |