|  | /****************************************************************************** | 
|  | * | 
|  | * This file is provided under a dual BSD/GPLv2 license.  When using or | 
|  | * redistributing this file, you may do so under either license. | 
|  | * | 
|  | * GPL LICENSE SUMMARY | 
|  | * | 
|  | * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. | 
|  | * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, | 
|  | * USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution | 
|  | * in the file called COPYING. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <linuxwifi@intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | * BSD LICENSE | 
|  | * | 
|  | * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. | 
|  | * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * | 
|  | *  * Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | *  * Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in | 
|  | *    the documentation and/or other materials provided with the | 
|  | *    distribution. | 
|  | *  * Neither the name Intel Corporation nor the names of its | 
|  | *    contributors may be used to endorse or promote products derived | 
|  | *    from this software without specific prior written permission. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | 
|  | * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | 
|  | * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | 
|  | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | 
|  | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
|  | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | 
|  | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #include <linux/etherdevice.h> | 
|  | #include <net/mac80211.h> | 
|  |  | 
|  | #include "mvm.h" | 
|  | #include "fw-api-scan.h" | 
|  |  | 
|  | #define IWL_DENSE_EBS_SCAN_RATIO 5 | 
|  | #define IWL_SPARSE_EBS_SCAN_RATIO 1 | 
|  |  | 
|  | enum iwl_mvm_traffic_load { | 
|  | IWL_MVM_TRAFFIC_LOW, | 
|  | IWL_MVM_TRAFFIC_MEDIUM, | 
|  | IWL_MVM_TRAFFIC_HIGH, | 
|  | }; | 
|  |  | 
|  | struct iwl_mvm_scan_timing_params { | 
|  | u32 dwell_active; | 
|  | u32 dwell_passive; | 
|  | u32 dwell_fragmented; | 
|  | u32 dwell_extended; | 
|  | u32 suspend_time; | 
|  | u32 max_out_time; | 
|  | }; | 
|  |  | 
|  | static struct iwl_mvm_scan_timing_params scan_timing[] = { | 
|  | [IWL_SCAN_TYPE_UNASSOC] = { | 
|  | .dwell_active = 10, | 
|  | .dwell_passive = 110, | 
|  | .dwell_fragmented = 44, | 
|  | .dwell_extended = 90, | 
|  | .suspend_time = 0, | 
|  | .max_out_time = 0, | 
|  | }, | 
|  | [IWL_SCAN_TYPE_WILD] = { | 
|  | .dwell_active = 10, | 
|  | .dwell_passive = 110, | 
|  | .dwell_fragmented = 44, | 
|  | .dwell_extended = 90, | 
|  | .suspend_time = 30, | 
|  | .max_out_time = 120, | 
|  | }, | 
|  | [IWL_SCAN_TYPE_MILD] = { | 
|  | .dwell_active = 10, | 
|  | .dwell_passive = 110, | 
|  | .dwell_fragmented = 44, | 
|  | .dwell_extended = 90, | 
|  | .suspend_time = 120, | 
|  | .max_out_time = 120, | 
|  | }, | 
|  | [IWL_SCAN_TYPE_FRAGMENTED] = { | 
|  | .dwell_active = 10, | 
|  | .dwell_passive = 110, | 
|  | .dwell_fragmented = 44, | 
|  | .suspend_time = 95, | 
|  | .max_out_time = 44, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | struct iwl_mvm_scan_params { | 
|  | enum iwl_mvm_scan_type type; | 
|  | u32 n_channels; | 
|  | u16 delay; | 
|  | int n_ssids; | 
|  | struct cfg80211_ssid *ssids; | 
|  | struct ieee80211_channel **channels; | 
|  | u32 flags; | 
|  | u8 *mac_addr; | 
|  | u8 *mac_addr_mask; | 
|  | bool no_cck; | 
|  | bool pass_all; | 
|  | int n_match_sets; | 
|  | struct iwl_scan_probe_req preq; | 
|  | struct cfg80211_match_set *match_sets; | 
|  | int n_scan_plans; | 
|  | struct cfg80211_sched_scan_plan *scan_plans; | 
|  | }; | 
|  |  | 
|  | static u8 iwl_mvm_scan_rx_ant(struct iwl_mvm *mvm) | 
|  | { | 
|  | if (mvm->scan_rx_ant != ANT_NONE) | 
|  | return mvm->scan_rx_ant; | 
|  | return iwl_mvm_get_valid_rx_ant(mvm); | 
|  | } | 
|  |  | 
|  | static inline __le16 iwl_mvm_scan_rx_chain(struct iwl_mvm *mvm) | 
|  | { | 
|  | u16 rx_chain; | 
|  | u8 rx_ant; | 
|  |  | 
|  | rx_ant = iwl_mvm_scan_rx_ant(mvm); | 
|  | rx_chain = rx_ant << PHY_RX_CHAIN_VALID_POS; | 
|  | rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS; | 
|  | rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_SEL_POS; | 
|  | rx_chain |= 0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS; | 
|  | return cpu_to_le16(rx_chain); | 
|  | } | 
|  |  | 
|  | static __le32 iwl_mvm_scan_rxon_flags(enum ieee80211_band band) | 
|  | { | 
|  | if (band == IEEE80211_BAND_2GHZ) | 
|  | return cpu_to_le32(PHY_BAND_24); | 
|  | else | 
|  | return cpu_to_le32(PHY_BAND_5); | 
|  | } | 
|  |  | 
|  | static inline __le32 | 
|  | iwl_mvm_scan_rate_n_flags(struct iwl_mvm *mvm, enum ieee80211_band band, | 
|  | bool no_cck) | 
|  | { | 
|  | u32 tx_ant; | 
|  |  | 
|  | mvm->scan_last_antenna_idx = | 
|  | iwl_mvm_next_antenna(mvm, iwl_mvm_get_valid_tx_ant(mvm), | 
|  | mvm->scan_last_antenna_idx); | 
|  | tx_ant = BIT(mvm->scan_last_antenna_idx) << RATE_MCS_ANT_POS; | 
|  |  | 
|  | if (band == IEEE80211_BAND_2GHZ && !no_cck) | 
|  | return cpu_to_le32(IWL_RATE_1M_PLCP | RATE_MCS_CCK_MSK | | 
|  | tx_ant); | 
|  | else | 
|  | return cpu_to_le32(IWL_RATE_6M_PLCP | tx_ant); | 
|  | } | 
|  |  | 
|  | static void iwl_mvm_scan_condition_iterator(void *data, u8 *mac, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); | 
|  | int *global_cnt = data; | 
|  |  | 
|  | if (vif->type != NL80211_IFTYPE_P2P_DEVICE && mvmvif->phy_ctxt && | 
|  | mvmvif->phy_ctxt->id < MAX_PHYS) | 
|  | *global_cnt += 1; | 
|  | } | 
|  |  | 
|  | static enum iwl_mvm_traffic_load iwl_mvm_get_traffic_load(struct iwl_mvm *mvm) | 
|  | { | 
|  | return IWL_MVM_TRAFFIC_LOW; | 
|  | } | 
|  |  | 
|  | static enum | 
|  | iwl_mvm_scan_type iwl_mvm_get_scan_type(struct iwl_mvm *mvm, bool p2p_device) | 
|  | { | 
|  | int global_cnt = 0; | 
|  | enum iwl_mvm_traffic_load load; | 
|  | bool low_latency; | 
|  |  | 
|  | ieee80211_iterate_active_interfaces_atomic(mvm->hw, | 
|  | IEEE80211_IFACE_ITER_NORMAL, | 
|  | iwl_mvm_scan_condition_iterator, | 
|  | &global_cnt); | 
|  | if (!global_cnt) | 
|  | return IWL_SCAN_TYPE_UNASSOC; | 
|  |  | 
|  | load = iwl_mvm_get_traffic_load(mvm); | 
|  | low_latency = iwl_mvm_low_latency(mvm); | 
|  |  | 
|  | if ((load == IWL_MVM_TRAFFIC_HIGH || low_latency) && !p2p_device && | 
|  | fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_FRAGMENTED_SCAN)) | 
|  | return IWL_SCAN_TYPE_FRAGMENTED; | 
|  |  | 
|  | if (load >= IWL_MVM_TRAFFIC_MEDIUM || low_latency) | 
|  | return IWL_SCAN_TYPE_MILD; | 
|  |  | 
|  | return IWL_SCAN_TYPE_WILD; | 
|  | } | 
|  |  | 
|  | static inline bool iwl_mvm_rrm_scan_needed(struct iwl_mvm *mvm) | 
|  | { | 
|  | /* require rrm scan whenever the fw supports it */ | 
|  | return fw_has_capa(&mvm->fw->ucode_capa, | 
|  | IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT); | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_max_scan_ie_fw_cmd_room(struct iwl_mvm *mvm) | 
|  | { | 
|  | int max_probe_len; | 
|  |  | 
|  | max_probe_len = SCAN_OFFLOAD_PROBE_REQ_SIZE; | 
|  |  | 
|  | /* we create the 802.11 header and SSID element */ | 
|  | max_probe_len -= 24 + 2; | 
|  |  | 
|  | /* DS parameter set element is added on 2.4GHZ band if required */ | 
|  | if (iwl_mvm_rrm_scan_needed(mvm)) | 
|  | max_probe_len -= 3; | 
|  |  | 
|  | return max_probe_len; | 
|  | } | 
|  |  | 
|  | int iwl_mvm_max_scan_ie_len(struct iwl_mvm *mvm) | 
|  | { | 
|  | int max_ie_len = iwl_mvm_max_scan_ie_fw_cmd_room(mvm); | 
|  |  | 
|  | /* TODO: [BUG] This function should return the maximum allowed size of | 
|  | * scan IEs, however the LMAC scan api contains both 2GHZ and 5GHZ IEs | 
|  | * in the same command. So the correct implementation of this function | 
|  | * is just iwl_mvm_max_scan_ie_fw_cmd_room() / 2. Currently the scan | 
|  | * command has only 512 bytes and it would leave us with about 240 | 
|  | * bytes for scan IEs, which is clearly not enough. So meanwhile | 
|  | * we will report an incorrect value. This may result in a failure to | 
|  | * issue a scan in unified_scan_lmac and unified_sched_scan_lmac | 
|  | * functions with -ENOBUFS, if a large enough probe will be provided. | 
|  | */ | 
|  | return max_ie_len; | 
|  | } | 
|  |  | 
|  | static u8 *iwl_mvm_dump_channel_list(struct iwl_scan_results_notif *res, | 
|  | int num_res, u8 *buf, size_t buf_size) | 
|  | { | 
|  | int i; | 
|  | u8 *pos = buf, *end = buf + buf_size; | 
|  |  | 
|  | for (i = 0; pos < end && i < num_res; i++) | 
|  | pos += snprintf(pos, end - pos, " %u", res[i].channel); | 
|  |  | 
|  | /* terminate the string in case the buffer was too short */ | 
|  | *(buf + buf_size - 1) = '\0'; | 
|  |  | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | void iwl_mvm_rx_lmac_scan_iter_complete_notif(struct iwl_mvm *mvm, | 
|  | struct iwl_rx_cmd_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = rxb_addr(rxb); | 
|  | struct iwl_lmac_scan_complete_notif *notif = (void *)pkt->data; | 
|  | u8 buf[256]; | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "Scan offload iteration complete: status=0x%x scanned channels=%d channels list: %s\n", | 
|  | notif->status, notif->scanned_channels, | 
|  | iwl_mvm_dump_channel_list(notif->results, | 
|  | notif->scanned_channels, buf, | 
|  | sizeof(buf))); | 
|  | } | 
|  |  | 
|  | void iwl_mvm_rx_scan_match_found(struct iwl_mvm *mvm, | 
|  | struct iwl_rx_cmd_buffer *rxb) | 
|  | { | 
|  | IWL_DEBUG_SCAN(mvm, "Scheduled scan results\n"); | 
|  | ieee80211_sched_scan_results(mvm->hw); | 
|  | } | 
|  |  | 
|  | static const char *iwl_mvm_ebs_status_str(enum iwl_scan_ebs_status status) | 
|  | { | 
|  | switch (status) { | 
|  | case IWL_SCAN_EBS_SUCCESS: | 
|  | return "successful"; | 
|  | case IWL_SCAN_EBS_INACTIVE: | 
|  | return "inactive"; | 
|  | case IWL_SCAN_EBS_FAILED: | 
|  | case IWL_SCAN_EBS_CHAN_NOT_FOUND: | 
|  | default: | 
|  | return "failed"; | 
|  | } | 
|  | } | 
|  |  | 
|  | void iwl_mvm_rx_lmac_scan_complete_notif(struct iwl_mvm *mvm, | 
|  | struct iwl_rx_cmd_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = rxb_addr(rxb); | 
|  | struct iwl_periodic_scan_complete *scan_notif = (void *)pkt->data; | 
|  | bool aborted = (scan_notif->status == IWL_SCAN_OFFLOAD_ABORTED); | 
|  |  | 
|  | /* If this happens, the firmware has mistakenly sent an LMAC | 
|  | * notification during UMAC scans -- warn and ignore it. | 
|  | */ | 
|  | if (WARN_ON_ONCE(fw_has_capa(&mvm->fw->ucode_capa, | 
|  | IWL_UCODE_TLV_CAPA_UMAC_SCAN))) | 
|  | return; | 
|  |  | 
|  | /* scan status must be locked for proper checking */ | 
|  | lockdep_assert_held(&mvm->mutex); | 
|  |  | 
|  | /* We first check if we were stopping a scan, in which case we | 
|  | * just clear the stopping flag.  Then we check if it was a | 
|  | * firmware initiated stop, in which case we need to inform | 
|  | * mac80211. | 
|  | * Note that we can have a stopping and a running scan | 
|  | * simultaneously, but we can't have two different types of | 
|  | * scans stopping or running at the same time (since LMAC | 
|  | * doesn't support it). | 
|  | */ | 
|  |  | 
|  | if (mvm->scan_status & IWL_MVM_SCAN_STOPPING_SCHED) { | 
|  | WARN_ON_ONCE(mvm->scan_status & IWL_MVM_SCAN_STOPPING_REGULAR); | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, "Scheduled scan %s, EBS status %s\n", | 
|  | aborted ? "aborted" : "completed", | 
|  | iwl_mvm_ebs_status_str(scan_notif->ebs_status)); | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "Last line %d, Last iteration %d, Time after last iteration %d\n", | 
|  | scan_notif->last_schedule_line, | 
|  | scan_notif->last_schedule_iteration, | 
|  | __le32_to_cpu(scan_notif->time_after_last_iter)); | 
|  |  | 
|  | mvm->scan_status &= ~IWL_MVM_SCAN_STOPPING_SCHED; | 
|  | } else if (mvm->scan_status & IWL_MVM_SCAN_STOPPING_REGULAR) { | 
|  | IWL_DEBUG_SCAN(mvm, "Regular scan %s, EBS status %s\n", | 
|  | aborted ? "aborted" : "completed", | 
|  | iwl_mvm_ebs_status_str(scan_notif->ebs_status)); | 
|  |  | 
|  | mvm->scan_status &= ~IWL_MVM_SCAN_STOPPING_REGULAR; | 
|  | } else if (mvm->scan_status & IWL_MVM_SCAN_SCHED) { | 
|  | WARN_ON_ONCE(mvm->scan_status & IWL_MVM_SCAN_REGULAR); | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, "Scheduled scan %s, EBS status %s\n", | 
|  | aborted ? "aborted" : "completed", | 
|  | iwl_mvm_ebs_status_str(scan_notif->ebs_status)); | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "Last line %d, Last iteration %d, Time after last iteration %d (FW)\n", | 
|  | scan_notif->last_schedule_line, | 
|  | scan_notif->last_schedule_iteration, | 
|  | __le32_to_cpu(scan_notif->time_after_last_iter)); | 
|  |  | 
|  | mvm->scan_status &= ~IWL_MVM_SCAN_SCHED; | 
|  | ieee80211_sched_scan_stopped(mvm->hw); | 
|  | } else if (mvm->scan_status & IWL_MVM_SCAN_REGULAR) { | 
|  | IWL_DEBUG_SCAN(mvm, "Regular scan %s, EBS status %s (FW)\n", | 
|  | aborted ? "aborted" : "completed", | 
|  | iwl_mvm_ebs_status_str(scan_notif->ebs_status)); | 
|  |  | 
|  | mvm->scan_status &= ~IWL_MVM_SCAN_REGULAR; | 
|  | ieee80211_scan_completed(mvm->hw, | 
|  | scan_notif->status == IWL_SCAN_OFFLOAD_ABORTED); | 
|  | iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); | 
|  | } | 
|  |  | 
|  | mvm->last_ebs_successful = | 
|  | scan_notif->ebs_status == IWL_SCAN_EBS_SUCCESS || | 
|  | scan_notif->ebs_status == IWL_SCAN_EBS_INACTIVE; | 
|  | } | 
|  |  | 
|  | static int iwl_ssid_exist(u8 *ssid, u8 ssid_len, struct iwl_ssid_ie *ssid_list) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < PROBE_OPTION_MAX; i++) { | 
|  | if (!ssid_list[i].len) | 
|  | break; | 
|  | if (ssid_list[i].len == ssid_len && | 
|  | !memcmp(ssid_list->ssid, ssid, ssid_len)) | 
|  | return i; | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* We insert the SSIDs in an inverted order, because the FW will | 
|  | * invert it back. | 
|  | */ | 
|  | static void iwl_scan_build_ssids(struct iwl_mvm_scan_params *params, | 
|  | struct iwl_ssid_ie *ssids, | 
|  | u32 *ssid_bitmap) | 
|  | { | 
|  | int i, j; | 
|  | int index; | 
|  |  | 
|  | /* | 
|  | * copy SSIDs from match list. | 
|  | * iwl_config_sched_scan_profiles() uses the order of these ssids to | 
|  | * config match list. | 
|  | */ | 
|  | for (i = 0, j = params->n_match_sets - 1; | 
|  | j >= 0 && i < PROBE_OPTION_MAX; | 
|  | i++, j--) { | 
|  | /* skip empty SSID matchsets */ | 
|  | if (!params->match_sets[j].ssid.ssid_len) | 
|  | continue; | 
|  | ssids[i].id = WLAN_EID_SSID; | 
|  | ssids[i].len = params->match_sets[j].ssid.ssid_len; | 
|  | memcpy(ssids[i].ssid, params->match_sets[j].ssid.ssid, | 
|  | ssids[i].len); | 
|  | } | 
|  |  | 
|  | /* add SSIDs from scan SSID list */ | 
|  | *ssid_bitmap = 0; | 
|  | for (j = params->n_ssids - 1; | 
|  | j >= 0 && i < PROBE_OPTION_MAX; | 
|  | i++, j--) { | 
|  | index = iwl_ssid_exist(params->ssids[j].ssid, | 
|  | params->ssids[j].ssid_len, | 
|  | ssids); | 
|  | if (index < 0) { | 
|  | ssids[i].id = WLAN_EID_SSID; | 
|  | ssids[i].len = params->ssids[j].ssid_len; | 
|  | memcpy(ssids[i].ssid, params->ssids[j].ssid, | 
|  | ssids[i].len); | 
|  | *ssid_bitmap |= BIT(i); | 
|  | } else { | 
|  | *ssid_bitmap |= BIT(index); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int | 
|  | iwl_mvm_config_sched_scan_profiles(struct iwl_mvm *mvm, | 
|  | struct cfg80211_sched_scan_request *req) | 
|  | { | 
|  | struct iwl_scan_offload_profile *profile; | 
|  | struct iwl_scan_offload_profile_cfg *profile_cfg; | 
|  | struct iwl_scan_offload_blacklist *blacklist; | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = SCAN_OFFLOAD_UPDATE_PROFILES_CMD, | 
|  | .len[1] = sizeof(*profile_cfg), | 
|  | .dataflags[0] = IWL_HCMD_DFL_NOCOPY, | 
|  | .dataflags[1] = IWL_HCMD_DFL_NOCOPY, | 
|  | }; | 
|  | int blacklist_len; | 
|  | int i; | 
|  | int ret; | 
|  |  | 
|  | if (WARN_ON(req->n_match_sets > IWL_SCAN_MAX_PROFILES)) | 
|  | return -EIO; | 
|  |  | 
|  | if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SHORT_BL) | 
|  | blacklist_len = IWL_SCAN_SHORT_BLACKLIST_LEN; | 
|  | else | 
|  | blacklist_len = IWL_SCAN_MAX_BLACKLIST_LEN; | 
|  |  | 
|  | blacklist = kzalloc(sizeof(*blacklist) * blacklist_len, GFP_KERNEL); | 
|  | if (!blacklist) | 
|  | return -ENOMEM; | 
|  |  | 
|  | profile_cfg = kzalloc(sizeof(*profile_cfg), GFP_KERNEL); | 
|  | if (!profile_cfg) { | 
|  | ret = -ENOMEM; | 
|  | goto free_blacklist; | 
|  | } | 
|  |  | 
|  | cmd.data[0] = blacklist; | 
|  | cmd.len[0] = sizeof(*blacklist) * blacklist_len; | 
|  | cmd.data[1] = profile_cfg; | 
|  |  | 
|  | /* No blacklist configuration */ | 
|  |  | 
|  | profile_cfg->num_profiles = req->n_match_sets; | 
|  | profile_cfg->active_clients = SCAN_CLIENT_SCHED_SCAN; | 
|  | profile_cfg->pass_match = SCAN_CLIENT_SCHED_SCAN; | 
|  | profile_cfg->match_notify = SCAN_CLIENT_SCHED_SCAN; | 
|  | if (!req->n_match_sets || !req->match_sets[0].ssid.ssid_len) | 
|  | profile_cfg->any_beacon_notify = SCAN_CLIENT_SCHED_SCAN; | 
|  |  | 
|  | for (i = 0; i < req->n_match_sets; i++) { | 
|  | profile = &profile_cfg->profiles[i]; | 
|  | profile->ssid_index = i; | 
|  | /* Support any cipher and auth algorithm */ | 
|  | profile->unicast_cipher = 0xff; | 
|  | profile->auth_alg = 0xff; | 
|  | profile->network_type = IWL_NETWORK_TYPE_ANY; | 
|  | profile->band_selection = IWL_SCAN_OFFLOAD_SELECT_ANY; | 
|  | profile->client_bitmap = SCAN_CLIENT_SCHED_SCAN; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, "Sending scheduled scan profile config\n"); | 
|  |  | 
|  | ret = iwl_mvm_send_cmd(mvm, &cmd); | 
|  | kfree(profile_cfg); | 
|  | free_blacklist: | 
|  | kfree(blacklist); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static bool iwl_mvm_scan_pass_all(struct iwl_mvm *mvm, | 
|  | struct cfg80211_sched_scan_request *req) | 
|  | { | 
|  | if (req->n_match_sets && req->match_sets[0].ssid.ssid_len) { | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "Sending scheduled scan with filtering, n_match_sets %d\n", | 
|  | req->n_match_sets); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, "Sending Scheduled scan without filtering\n"); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_lmac_scan_abort(struct iwl_mvm *mvm) | 
|  | { | 
|  | int ret; | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = SCAN_OFFLOAD_ABORT_CMD, | 
|  | }; | 
|  | u32 status; | 
|  |  | 
|  | ret = iwl_mvm_send_cmd_status(mvm, &cmd, &status); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (status != CAN_ABORT_STATUS) { | 
|  | /* | 
|  | * The scan abort will return 1 for success or | 
|  | * 2 for "failure".  A failure condition can be | 
|  | * due to simply not being in an active scan which | 
|  | * can occur if we send the scan abort before the | 
|  | * microcode has notified us that a scan is completed. | 
|  | */ | 
|  | IWL_DEBUG_SCAN(mvm, "SCAN OFFLOAD ABORT ret %d.\n", status); | 
|  | ret = -ENOENT; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void iwl_mvm_scan_fill_tx_cmd(struct iwl_mvm *mvm, | 
|  | struct iwl_scan_req_tx_cmd *tx_cmd, | 
|  | bool no_cck) | 
|  | { | 
|  | tx_cmd[0].tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL | | 
|  | TX_CMD_FLG_BT_DIS); | 
|  | tx_cmd[0].rate_n_flags = iwl_mvm_scan_rate_n_flags(mvm, | 
|  | IEEE80211_BAND_2GHZ, | 
|  | no_cck); | 
|  | tx_cmd[0].sta_id = mvm->aux_sta.sta_id; | 
|  |  | 
|  | tx_cmd[1].tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL | | 
|  | TX_CMD_FLG_BT_DIS); | 
|  | tx_cmd[1].rate_n_flags = iwl_mvm_scan_rate_n_flags(mvm, | 
|  | IEEE80211_BAND_5GHZ, | 
|  | no_cck); | 
|  | tx_cmd[1].sta_id = mvm->aux_sta.sta_id; | 
|  | } | 
|  |  | 
|  | static void | 
|  | iwl_mvm_lmac_scan_cfg_channels(struct iwl_mvm *mvm, | 
|  | struct ieee80211_channel **channels, | 
|  | int n_channels, u32 ssid_bitmap, | 
|  | struct iwl_scan_req_lmac *cmd) | 
|  | { | 
|  | struct iwl_scan_channel_cfg_lmac *channel_cfg = (void *)&cmd->data; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < n_channels; i++) { | 
|  | channel_cfg[i].channel_num = | 
|  | cpu_to_le16(channels[i]->hw_value); | 
|  | channel_cfg[i].iter_count = cpu_to_le16(1); | 
|  | channel_cfg[i].iter_interval = 0; | 
|  | channel_cfg[i].flags = | 
|  | cpu_to_le32(IWL_UNIFIED_SCAN_CHANNEL_PARTIAL | | 
|  | ssid_bitmap); | 
|  | } | 
|  | } | 
|  |  | 
|  | static u8 *iwl_mvm_copy_and_insert_ds_elem(struct iwl_mvm *mvm, const u8 *ies, | 
|  | size_t len, u8 *const pos) | 
|  | { | 
|  | static const u8 before_ds_params[] = { | 
|  | WLAN_EID_SSID, | 
|  | WLAN_EID_SUPP_RATES, | 
|  | WLAN_EID_REQUEST, | 
|  | WLAN_EID_EXT_SUPP_RATES, | 
|  | }; | 
|  | size_t offs; | 
|  | u8 *newpos = pos; | 
|  |  | 
|  | if (!iwl_mvm_rrm_scan_needed(mvm)) { | 
|  | memcpy(newpos, ies, len); | 
|  | return newpos + len; | 
|  | } | 
|  |  | 
|  | offs = ieee80211_ie_split(ies, len, | 
|  | before_ds_params, | 
|  | ARRAY_SIZE(before_ds_params), | 
|  | 0); | 
|  |  | 
|  | memcpy(newpos, ies, offs); | 
|  | newpos += offs; | 
|  |  | 
|  | /* Add a placeholder for DS Parameter Set element */ | 
|  | *newpos++ = WLAN_EID_DS_PARAMS; | 
|  | *newpos++ = 1; | 
|  | *newpos++ = 0; | 
|  |  | 
|  | memcpy(newpos, ies + offs, len - offs); | 
|  | newpos += len - offs; | 
|  |  | 
|  | return newpos; | 
|  | } | 
|  |  | 
|  | static void | 
|  | iwl_mvm_build_scan_probe(struct iwl_mvm *mvm, struct ieee80211_vif *vif, | 
|  | struct ieee80211_scan_ies *ies, | 
|  | struct iwl_mvm_scan_params *params) | 
|  | { | 
|  | struct ieee80211_mgmt *frame = (void *)params->preq.buf; | 
|  | u8 *pos, *newpos; | 
|  | const u8 *mac_addr = params->flags & NL80211_SCAN_FLAG_RANDOM_ADDR ? | 
|  | params->mac_addr : NULL; | 
|  |  | 
|  | /* | 
|  | * Unfortunately, right now the offload scan doesn't support randomising | 
|  | * within the firmware, so until the firmware API is ready we implement | 
|  | * it in the driver. This means that the scan iterations won't really be | 
|  | * random, only when it's restarted, but at least that helps a bit. | 
|  | */ | 
|  | if (mac_addr) | 
|  | get_random_mask_addr(frame->sa, mac_addr, | 
|  | params->mac_addr_mask); | 
|  | else | 
|  | memcpy(frame->sa, vif->addr, ETH_ALEN); | 
|  |  | 
|  | frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); | 
|  | eth_broadcast_addr(frame->da); | 
|  | eth_broadcast_addr(frame->bssid); | 
|  | frame->seq_ctrl = 0; | 
|  |  | 
|  | pos = frame->u.probe_req.variable; | 
|  | *pos++ = WLAN_EID_SSID; | 
|  | *pos++ = 0; | 
|  |  | 
|  | params->preq.mac_header.offset = 0; | 
|  | params->preq.mac_header.len = cpu_to_le16(24 + 2); | 
|  |  | 
|  | /* Insert ds parameter set element on 2.4 GHz band */ | 
|  | newpos = iwl_mvm_copy_and_insert_ds_elem(mvm, | 
|  | ies->ies[IEEE80211_BAND_2GHZ], | 
|  | ies->len[IEEE80211_BAND_2GHZ], | 
|  | pos); | 
|  | params->preq.band_data[0].offset = cpu_to_le16(pos - params->preq.buf); | 
|  | params->preq.band_data[0].len = cpu_to_le16(newpos - pos); | 
|  | pos = newpos; | 
|  |  | 
|  | memcpy(pos, ies->ies[IEEE80211_BAND_5GHZ], | 
|  | ies->len[IEEE80211_BAND_5GHZ]); | 
|  | params->preq.band_data[1].offset = cpu_to_le16(pos - params->preq.buf); | 
|  | params->preq.band_data[1].len = | 
|  | cpu_to_le16(ies->len[IEEE80211_BAND_5GHZ]); | 
|  | pos += ies->len[IEEE80211_BAND_5GHZ]; | 
|  |  | 
|  | memcpy(pos, ies->common_ies, ies->common_ie_len); | 
|  | params->preq.common_data.offset = cpu_to_le16(pos - params->preq.buf); | 
|  | params->preq.common_data.len = cpu_to_le16(ies->common_ie_len); | 
|  | } | 
|  |  | 
|  | static __le32 iwl_mvm_scan_priority(struct iwl_mvm *mvm, | 
|  | enum iwl_scan_priority_ext prio) | 
|  | { | 
|  | if (fw_has_api(&mvm->fw->ucode_capa, | 
|  | IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY)) | 
|  | return cpu_to_le32(prio); | 
|  |  | 
|  | if (prio <= IWL_SCAN_PRIORITY_EXT_2) | 
|  | return cpu_to_le32(IWL_SCAN_PRIORITY_LOW); | 
|  |  | 
|  | if (prio <= IWL_SCAN_PRIORITY_EXT_4) | 
|  | return cpu_to_le32(IWL_SCAN_PRIORITY_MEDIUM); | 
|  |  | 
|  | return cpu_to_le32(IWL_SCAN_PRIORITY_HIGH); | 
|  | } | 
|  |  | 
|  | static void iwl_mvm_scan_lmac_dwell(struct iwl_mvm *mvm, | 
|  | struct iwl_scan_req_lmac *cmd, | 
|  | struct iwl_mvm_scan_params *params) | 
|  | { | 
|  | cmd->active_dwell = scan_timing[params->type].dwell_active; | 
|  | cmd->passive_dwell = scan_timing[params->type].dwell_passive; | 
|  | cmd->fragmented_dwell = scan_timing[params->type].dwell_fragmented; | 
|  | cmd->extended_dwell = scan_timing[params->type].dwell_extended; | 
|  | cmd->max_out_time = cpu_to_le32(scan_timing[params->type].max_out_time); | 
|  | cmd->suspend_time = cpu_to_le32(scan_timing[params->type].suspend_time); | 
|  | cmd->scan_prio = iwl_mvm_scan_priority(mvm, IWL_SCAN_PRIORITY_EXT_6); | 
|  | } | 
|  |  | 
|  | static inline bool iwl_mvm_scan_fits(struct iwl_mvm *mvm, int n_ssids, | 
|  | struct ieee80211_scan_ies *ies, | 
|  | int n_channels) | 
|  | { | 
|  | return ((n_ssids <= PROBE_OPTION_MAX) && | 
|  | (n_channels <= mvm->fw->ucode_capa.n_scan_channels) & | 
|  | (ies->common_ie_len + | 
|  | ies->len[NL80211_BAND_2GHZ] + | 
|  | ies->len[NL80211_BAND_5GHZ] <= | 
|  | iwl_mvm_max_scan_ie_fw_cmd_room(mvm))); | 
|  | } | 
|  |  | 
|  | static inline bool iwl_mvm_scan_use_ebs(struct iwl_mvm *mvm, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | const struct iwl_ucode_capabilities *capa = &mvm->fw->ucode_capa; | 
|  |  | 
|  | /* We can only use EBS if: | 
|  | *	1. the feature is supported; | 
|  | *	2. the last EBS was successful; | 
|  | *	3. if only single scan, the single scan EBS API is supported; | 
|  | *	4. it's not a p2p find operation. | 
|  | */ | 
|  | return ((capa->flags & IWL_UCODE_TLV_FLAGS_EBS_SUPPORT) && | 
|  | mvm->last_ebs_successful && | 
|  | vif->type != NL80211_IFTYPE_P2P_DEVICE); | 
|  | } | 
|  |  | 
|  | static inline bool iwl_mvm_is_regular_scan(struct iwl_mvm_scan_params *params) | 
|  | { | 
|  | return params->n_scan_plans == 1 && | 
|  | params->scan_plans[0].iterations == 1; | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_scan_lmac_flags(struct iwl_mvm *mvm, | 
|  | struct iwl_mvm_scan_params *params, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | int flags = 0; | 
|  |  | 
|  | if (params->n_ssids == 0) | 
|  | flags |= IWL_MVM_LMAC_SCAN_FLAG_PASSIVE; | 
|  |  | 
|  | if (params->n_ssids == 1 && params->ssids[0].ssid_len != 0) | 
|  | flags |= IWL_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION; | 
|  |  | 
|  | if (params->type == IWL_SCAN_TYPE_FRAGMENTED) | 
|  | flags |= IWL_MVM_LMAC_SCAN_FLAG_FRAGMENTED; | 
|  |  | 
|  | if (iwl_mvm_rrm_scan_needed(mvm)) | 
|  | flags |= IWL_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED; | 
|  |  | 
|  | if (params->pass_all) | 
|  | flags |= IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL; | 
|  | else | 
|  | flags |= IWL_MVM_LMAC_SCAN_FLAG_MATCH; | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
|  | if (mvm->scan_iter_notif_enabled) | 
|  | flags |= IWL_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE; | 
|  | #endif | 
|  |  | 
|  | if (iwl_mvm_is_regular_scan(params) && | 
|  | vif->type != NL80211_IFTYPE_P2P_DEVICE && | 
|  | params->type != IWL_SCAN_TYPE_FRAGMENTED) | 
|  | flags |= IWL_MVM_LMAC_SCAN_FLAG_EXTENDED_DWELL; | 
|  |  | 
|  | return flags; | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_scan_lmac(struct iwl_mvm *mvm, struct ieee80211_vif *vif, | 
|  | struct iwl_mvm_scan_params *params) | 
|  | { | 
|  | struct iwl_scan_req_lmac *cmd = mvm->scan_cmd; | 
|  | struct iwl_scan_probe_req *preq = | 
|  | (void *)(cmd->data + sizeof(struct iwl_scan_channel_cfg_lmac) * | 
|  | mvm->fw->ucode_capa.n_scan_channels); | 
|  | u32 ssid_bitmap = 0; | 
|  | int i; | 
|  |  | 
|  | lockdep_assert_held(&mvm->mutex); | 
|  |  | 
|  | memset(cmd, 0, ksize(cmd)); | 
|  |  | 
|  | if (WARN_ON(params->n_scan_plans > IWL_MAX_SCHED_SCAN_PLANS)) | 
|  | return -EINVAL; | 
|  |  | 
|  | iwl_mvm_scan_lmac_dwell(mvm, cmd, params); | 
|  |  | 
|  | cmd->rx_chain_select = iwl_mvm_scan_rx_chain(mvm); | 
|  | cmd->iter_num = cpu_to_le32(1); | 
|  | cmd->n_channels = (u8)params->n_channels; | 
|  |  | 
|  | cmd->delay = cpu_to_le32(params->delay); | 
|  |  | 
|  | cmd->scan_flags = cpu_to_le32(iwl_mvm_scan_lmac_flags(mvm, params, | 
|  | vif)); | 
|  |  | 
|  | cmd->flags = iwl_mvm_scan_rxon_flags(params->channels[0]->band); | 
|  | cmd->filter_flags = cpu_to_le32(MAC_FILTER_ACCEPT_GRP | | 
|  | MAC_FILTER_IN_BEACON); | 
|  | iwl_mvm_scan_fill_tx_cmd(mvm, cmd->tx_cmd, params->no_cck); | 
|  | iwl_scan_build_ssids(params, cmd->direct_scan, &ssid_bitmap); | 
|  |  | 
|  | /* this API uses bits 1-20 instead of 0-19 */ | 
|  | ssid_bitmap <<= 1; | 
|  |  | 
|  | for (i = 0; i < params->n_scan_plans; i++) { | 
|  | struct cfg80211_sched_scan_plan *scan_plan = | 
|  | ¶ms->scan_plans[i]; | 
|  |  | 
|  | cmd->schedule[i].delay = | 
|  | cpu_to_le16(scan_plan->interval); | 
|  | cmd->schedule[i].iterations = scan_plan->iterations; | 
|  | cmd->schedule[i].full_scan_mul = 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the number of iterations of the last scan plan is set to | 
|  | * zero, it should run infinitely. However, this is not always the case. | 
|  | * For example, when regular scan is requested the driver sets one scan | 
|  | * plan with one iteration. | 
|  | */ | 
|  | if (!cmd->schedule[i - 1].iterations) | 
|  | cmd->schedule[i - 1].iterations = 0xff; | 
|  |  | 
|  | if (iwl_mvm_scan_use_ebs(mvm, vif)) { | 
|  | cmd->channel_opt[0].flags = | 
|  | cpu_to_le16(IWL_SCAN_CHANNEL_FLAG_EBS | | 
|  | IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE | | 
|  | IWL_SCAN_CHANNEL_FLAG_CACHE_ADD); | 
|  | cmd->channel_opt[0].non_ebs_ratio = | 
|  | cpu_to_le16(IWL_DENSE_EBS_SCAN_RATIO); | 
|  | cmd->channel_opt[1].flags = | 
|  | cpu_to_le16(IWL_SCAN_CHANNEL_FLAG_EBS | | 
|  | IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE | | 
|  | IWL_SCAN_CHANNEL_FLAG_CACHE_ADD); | 
|  | cmd->channel_opt[1].non_ebs_ratio = | 
|  | cpu_to_le16(IWL_SPARSE_EBS_SCAN_RATIO); | 
|  | } | 
|  |  | 
|  | iwl_mvm_lmac_scan_cfg_channels(mvm, params->channels, | 
|  | params->n_channels, ssid_bitmap, cmd); | 
|  |  | 
|  | *preq = params->preq; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rate_to_scan_rate_flag(unsigned int rate) | 
|  | { | 
|  | static const int rate_to_scan_rate[IWL_RATE_COUNT] = { | 
|  | [IWL_RATE_1M_INDEX]	= SCAN_CONFIG_RATE_1M, | 
|  | [IWL_RATE_2M_INDEX]	= SCAN_CONFIG_RATE_2M, | 
|  | [IWL_RATE_5M_INDEX]	= SCAN_CONFIG_RATE_5M, | 
|  | [IWL_RATE_11M_INDEX]	= SCAN_CONFIG_RATE_11M, | 
|  | [IWL_RATE_6M_INDEX]	= SCAN_CONFIG_RATE_6M, | 
|  | [IWL_RATE_9M_INDEX]	= SCAN_CONFIG_RATE_9M, | 
|  | [IWL_RATE_12M_INDEX]	= SCAN_CONFIG_RATE_12M, | 
|  | [IWL_RATE_18M_INDEX]	= SCAN_CONFIG_RATE_18M, | 
|  | [IWL_RATE_24M_INDEX]	= SCAN_CONFIG_RATE_24M, | 
|  | [IWL_RATE_36M_INDEX]	= SCAN_CONFIG_RATE_36M, | 
|  | [IWL_RATE_48M_INDEX]	= SCAN_CONFIG_RATE_48M, | 
|  | [IWL_RATE_54M_INDEX]	= SCAN_CONFIG_RATE_54M, | 
|  | }; | 
|  |  | 
|  | return rate_to_scan_rate[rate]; | 
|  | } | 
|  |  | 
|  | static __le32 iwl_mvm_scan_config_rates(struct iwl_mvm *mvm) | 
|  | { | 
|  | struct ieee80211_supported_band *band; | 
|  | unsigned int rates = 0; | 
|  | int i; | 
|  |  | 
|  | band = &mvm->nvm_data->bands[IEEE80211_BAND_2GHZ]; | 
|  | for (i = 0; i < band->n_bitrates; i++) | 
|  | rates |= rate_to_scan_rate_flag(band->bitrates[i].hw_value); | 
|  | band = &mvm->nvm_data->bands[IEEE80211_BAND_5GHZ]; | 
|  | for (i = 0; i < band->n_bitrates; i++) | 
|  | rates |= rate_to_scan_rate_flag(band->bitrates[i].hw_value); | 
|  |  | 
|  | /* Set both basic rates and supported rates */ | 
|  | rates |= SCAN_CONFIG_SUPPORTED_RATE(rates); | 
|  |  | 
|  | return cpu_to_le32(rates); | 
|  | } | 
|  |  | 
|  | int iwl_mvm_config_scan(struct iwl_mvm *mvm) | 
|  | { | 
|  | struct iwl_scan_config *scan_config; | 
|  | struct ieee80211_supported_band *band; | 
|  | int num_channels = | 
|  | mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels + | 
|  | mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels; | 
|  | int ret, i, j = 0, cmd_size; | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = iwl_cmd_id(SCAN_CFG_CMD, IWL_ALWAYS_LONG_GROUP, 0), | 
|  | }; | 
|  | enum iwl_mvm_scan_type type = iwl_mvm_get_scan_type(mvm, false); | 
|  |  | 
|  | if (WARN_ON(num_channels > mvm->fw->ucode_capa.n_scan_channels)) | 
|  | return -ENOBUFS; | 
|  |  | 
|  | if (type == mvm->scan_type) { | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "Ignoring UMAC scan config of the same type\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | cmd_size = sizeof(*scan_config) + mvm->fw->ucode_capa.n_scan_channels; | 
|  |  | 
|  | scan_config = kzalloc(cmd_size, GFP_KERNEL); | 
|  | if (!scan_config) | 
|  | return -ENOMEM; | 
|  |  | 
|  | scan_config->flags = cpu_to_le32(SCAN_CONFIG_FLAG_ACTIVATE | | 
|  | SCAN_CONFIG_FLAG_ALLOW_CHUB_REQS | | 
|  | SCAN_CONFIG_FLAG_SET_TX_CHAINS | | 
|  | SCAN_CONFIG_FLAG_SET_RX_CHAINS | | 
|  | SCAN_CONFIG_FLAG_SET_ALL_TIMES | | 
|  | SCAN_CONFIG_FLAG_SET_LEGACY_RATES | | 
|  | SCAN_CONFIG_FLAG_SET_MAC_ADDR | | 
|  | SCAN_CONFIG_FLAG_SET_CHANNEL_FLAGS| | 
|  | SCAN_CONFIG_N_CHANNELS(num_channels) | | 
|  | (type == IWL_SCAN_TYPE_FRAGMENTED ? | 
|  | SCAN_CONFIG_FLAG_SET_FRAGMENTED : | 
|  | SCAN_CONFIG_FLAG_CLEAR_FRAGMENTED)); | 
|  | scan_config->tx_chains = cpu_to_le32(iwl_mvm_get_valid_tx_ant(mvm)); | 
|  | scan_config->rx_chains = cpu_to_le32(iwl_mvm_scan_rx_ant(mvm)); | 
|  | scan_config->legacy_rates = iwl_mvm_scan_config_rates(mvm); | 
|  | scan_config->out_of_channel_time = | 
|  | cpu_to_le32(scan_timing[type].max_out_time); | 
|  | scan_config->suspend_time = cpu_to_le32(scan_timing[type].suspend_time); | 
|  | scan_config->dwell_active = scan_timing[type].dwell_active; | 
|  | scan_config->dwell_passive = scan_timing[type].dwell_passive; | 
|  | scan_config->dwell_fragmented = scan_timing[type].dwell_fragmented; | 
|  | scan_config->dwell_extended = scan_timing[type].dwell_extended; | 
|  |  | 
|  | memcpy(&scan_config->mac_addr, &mvm->addresses[0].addr, ETH_ALEN); | 
|  |  | 
|  | scan_config->bcast_sta_id = mvm->aux_sta.sta_id; | 
|  | scan_config->channel_flags = IWL_CHANNEL_FLAG_EBS | | 
|  | IWL_CHANNEL_FLAG_ACCURATE_EBS | | 
|  | IWL_CHANNEL_FLAG_EBS_ADD | | 
|  | IWL_CHANNEL_FLAG_PRE_SCAN_PASSIVE2ACTIVE; | 
|  |  | 
|  | band = &mvm->nvm_data->bands[IEEE80211_BAND_2GHZ]; | 
|  | for (i = 0; i < band->n_channels; i++, j++) | 
|  | scan_config->channel_array[j] = band->channels[i].hw_value; | 
|  | band = &mvm->nvm_data->bands[IEEE80211_BAND_5GHZ]; | 
|  | for (i = 0; i < band->n_channels; i++, j++) | 
|  | scan_config->channel_array[j] = band->channels[i].hw_value; | 
|  |  | 
|  | cmd.data[0] = scan_config; | 
|  | cmd.len[0] = cmd_size; | 
|  | cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, "Sending UMAC scan config\n"); | 
|  |  | 
|  | ret = iwl_mvm_send_cmd(mvm, &cmd); | 
|  | if (!ret) | 
|  | mvm->scan_type = type; | 
|  |  | 
|  | kfree(scan_config); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_scan_uid_by_status(struct iwl_mvm *mvm, int status) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < mvm->max_scans; i++) | 
|  | if (mvm->scan_uid_status[i] == status) | 
|  | return i; | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | static void iwl_mvm_scan_umac_dwell(struct iwl_mvm *mvm, | 
|  | struct iwl_scan_req_umac *cmd, | 
|  | struct iwl_mvm_scan_params *params) | 
|  | { | 
|  | cmd->extended_dwell = scan_timing[params->type].dwell_extended; | 
|  | cmd->active_dwell = scan_timing[params->type].dwell_active; | 
|  | cmd->passive_dwell = scan_timing[params->type].dwell_passive; | 
|  | cmd->fragmented_dwell = scan_timing[params->type].dwell_fragmented; | 
|  | cmd->max_out_time = cpu_to_le32(scan_timing[params->type].max_out_time); | 
|  | cmd->suspend_time = cpu_to_le32(scan_timing[params->type].suspend_time); | 
|  | cmd->scan_priority = | 
|  | iwl_mvm_scan_priority(mvm, IWL_SCAN_PRIORITY_EXT_6); | 
|  |  | 
|  | if (iwl_mvm_is_regular_scan(params)) | 
|  | cmd->ooc_priority = | 
|  | iwl_mvm_scan_priority(mvm, IWL_SCAN_PRIORITY_EXT_6); | 
|  | else | 
|  | cmd->ooc_priority = | 
|  | iwl_mvm_scan_priority(mvm, IWL_SCAN_PRIORITY_EXT_2); | 
|  | } | 
|  |  | 
|  | static void | 
|  | iwl_mvm_umac_scan_cfg_channels(struct iwl_mvm *mvm, | 
|  | struct ieee80211_channel **channels, | 
|  | int n_channels, u32 ssid_bitmap, | 
|  | struct iwl_scan_req_umac *cmd) | 
|  | { | 
|  | struct iwl_scan_channel_cfg_umac *channel_cfg = (void *)&cmd->data; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < n_channels; i++) { | 
|  | channel_cfg[i].flags = cpu_to_le32(ssid_bitmap); | 
|  | channel_cfg[i].channel_num = channels[i]->hw_value; | 
|  | channel_cfg[i].iter_count = 1; | 
|  | channel_cfg[i].iter_interval = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static u32 iwl_mvm_scan_umac_flags(struct iwl_mvm *mvm, | 
|  | struct iwl_mvm_scan_params *params, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | int flags = 0; | 
|  |  | 
|  | if (params->n_ssids == 0) | 
|  | flags = IWL_UMAC_SCAN_GEN_FLAGS_PASSIVE; | 
|  |  | 
|  | if (params->n_ssids == 1 && params->ssids[0].ssid_len != 0) | 
|  | flags |= IWL_UMAC_SCAN_GEN_FLAGS_PRE_CONNECT; | 
|  |  | 
|  | if (params->type == IWL_SCAN_TYPE_FRAGMENTED) | 
|  | flags |= IWL_UMAC_SCAN_GEN_FLAGS_FRAGMENTED; | 
|  |  | 
|  | if (iwl_mvm_rrm_scan_needed(mvm)) | 
|  | flags |= IWL_UMAC_SCAN_GEN_FLAGS_RRM_ENABLED; | 
|  |  | 
|  | if (params->pass_all) | 
|  | flags |= IWL_UMAC_SCAN_GEN_FLAGS_PASS_ALL; | 
|  | else | 
|  | flags |= IWL_UMAC_SCAN_GEN_FLAGS_MATCH; | 
|  |  | 
|  | if (!iwl_mvm_is_regular_scan(params)) | 
|  | flags |= IWL_UMAC_SCAN_GEN_FLAGS_PERIODIC; | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
|  | if (mvm->scan_iter_notif_enabled) | 
|  | flags |= IWL_UMAC_SCAN_GEN_FLAGS_ITER_COMPLETE; | 
|  | #endif | 
|  |  | 
|  | if (iwl_mvm_is_regular_scan(params) && | 
|  | vif->type != NL80211_IFTYPE_P2P_DEVICE && | 
|  | params->type != IWL_SCAN_TYPE_FRAGMENTED) | 
|  | flags |= IWL_UMAC_SCAN_GEN_FLAGS_EXTENDED_DWELL; | 
|  |  | 
|  | return flags; | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_scan_umac(struct iwl_mvm *mvm, struct ieee80211_vif *vif, | 
|  | struct iwl_mvm_scan_params *params, | 
|  | int type) | 
|  | { | 
|  | struct iwl_scan_req_umac *cmd = mvm->scan_cmd; | 
|  | struct iwl_scan_req_umac_tail *sec_part = (void *)&cmd->data + | 
|  | sizeof(struct iwl_scan_channel_cfg_umac) * | 
|  | mvm->fw->ucode_capa.n_scan_channels; | 
|  | int uid, i; | 
|  | u32 ssid_bitmap = 0; | 
|  |  | 
|  | lockdep_assert_held(&mvm->mutex); | 
|  |  | 
|  | if (WARN_ON(params->n_scan_plans > IWL_MAX_SCHED_SCAN_PLANS)) | 
|  | return -EINVAL; | 
|  |  | 
|  | uid = iwl_mvm_scan_uid_by_status(mvm, 0); | 
|  | if (uid < 0) | 
|  | return uid; | 
|  |  | 
|  | memset(cmd, 0, ksize(cmd)); | 
|  |  | 
|  | iwl_mvm_scan_umac_dwell(mvm, cmd, params); | 
|  |  | 
|  | mvm->scan_uid_status[uid] = type; | 
|  |  | 
|  | cmd->uid = cpu_to_le32(uid); | 
|  | cmd->general_flags = cpu_to_le32(iwl_mvm_scan_umac_flags(mvm, params, | 
|  | vif)); | 
|  |  | 
|  | if (type == IWL_MVM_SCAN_SCHED || type == IWL_MVM_SCAN_NETDETECT) | 
|  | cmd->flags = cpu_to_le32(IWL_UMAC_SCAN_FLAG_PREEMPTIVE); | 
|  |  | 
|  | if (iwl_mvm_scan_use_ebs(mvm, vif)) | 
|  | cmd->channel_flags = IWL_SCAN_CHANNEL_FLAG_EBS | | 
|  | IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE | | 
|  | IWL_SCAN_CHANNEL_FLAG_CACHE_ADD; | 
|  |  | 
|  | cmd->n_channels = params->n_channels; | 
|  |  | 
|  | iwl_scan_build_ssids(params, sec_part->direct_scan, &ssid_bitmap); | 
|  |  | 
|  | iwl_mvm_umac_scan_cfg_channels(mvm, params->channels, | 
|  | params->n_channels, ssid_bitmap, cmd); | 
|  |  | 
|  | for (i = 0; i < params->n_scan_plans; i++) { | 
|  | struct cfg80211_sched_scan_plan *scan_plan = | 
|  | ¶ms->scan_plans[i]; | 
|  |  | 
|  | sec_part->schedule[i].iter_count = scan_plan->iterations; | 
|  | sec_part->schedule[i].interval = | 
|  | cpu_to_le16(scan_plan->interval); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the number of iterations of the last scan plan is set to | 
|  | * zero, it should run infinitely. However, this is not always the case. | 
|  | * For example, when regular scan is requested the driver sets one scan | 
|  | * plan with one iteration. | 
|  | */ | 
|  | if (!sec_part->schedule[i - 1].iter_count) | 
|  | sec_part->schedule[i - 1].iter_count = 0xff; | 
|  |  | 
|  | sec_part->delay = cpu_to_le16(params->delay); | 
|  | sec_part->preq = params->preq; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_num_scans(struct iwl_mvm *mvm) | 
|  | { | 
|  | return hweight32(mvm->scan_status & IWL_MVM_SCAN_MASK); | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_check_running_scans(struct iwl_mvm *mvm, int type) | 
|  | { | 
|  | /* This looks a bit arbitrary, but the idea is that if we run | 
|  | * out of possible simultaneous scans and the userspace is | 
|  | * trying to run a scan type that is already running, we | 
|  | * return -EBUSY.  But if the userspace wants to start a | 
|  | * different type of scan, we stop the opposite type to make | 
|  | * space for the new request.  The reason is backwards | 
|  | * compatibility with old wpa_supplicant that wouldn't stop a | 
|  | * scheduled scan before starting a normal scan. | 
|  | */ | 
|  |  | 
|  | if (iwl_mvm_num_scans(mvm) < mvm->max_scans) | 
|  | return 0; | 
|  |  | 
|  | /* Use a switch, even though this is a bitmask, so that more | 
|  | * than one bits set will fall in default and we will warn. | 
|  | */ | 
|  | switch (type) { | 
|  | case IWL_MVM_SCAN_REGULAR: | 
|  | if (mvm->scan_status & IWL_MVM_SCAN_REGULAR_MASK) | 
|  | return -EBUSY; | 
|  | return iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_SCHED, true); | 
|  | case IWL_MVM_SCAN_SCHED: | 
|  | if (mvm->scan_status & IWL_MVM_SCAN_SCHED_MASK) | 
|  | return -EBUSY; | 
|  | return iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_REGULAR, true); | 
|  | case IWL_MVM_SCAN_NETDETECT: | 
|  | /* No need to stop anything for net-detect since the | 
|  | * firmware is restarted anyway.  This way, any sched | 
|  | * scans that were running will be restarted when we | 
|  | * resume. | 
|  | */ | 
|  | return 0; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | int iwl_mvm_reg_scan_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif, | 
|  | struct cfg80211_scan_request *req, | 
|  | struct ieee80211_scan_ies *ies) | 
|  | { | 
|  | struct iwl_host_cmd hcmd = { | 
|  | .len = { iwl_mvm_scan_size(mvm), }, | 
|  | .data = { mvm->scan_cmd, }, | 
|  | .dataflags = { IWL_HCMD_DFL_NOCOPY, }, | 
|  | }; | 
|  | struct iwl_mvm_scan_params params = {}; | 
|  | int ret; | 
|  | struct cfg80211_sched_scan_plan scan_plan = { .iterations = 1 }; | 
|  |  | 
|  | lockdep_assert_held(&mvm->mutex); | 
|  |  | 
|  | if (iwl_mvm_is_lar_supported(mvm) && !mvm->lar_regdom_set) { | 
|  | IWL_ERR(mvm, "scan while LAR regdomain is not set\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | ret = iwl_mvm_check_running_scans(mvm, IWL_MVM_SCAN_REGULAR); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* we should have failed registration if scan_cmd was NULL */ | 
|  | if (WARN_ON(!mvm->scan_cmd)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (!iwl_mvm_scan_fits(mvm, req->n_ssids, ies, req->n_channels)) | 
|  | return -ENOBUFS; | 
|  |  | 
|  | params.n_ssids = req->n_ssids; | 
|  | params.flags = req->flags; | 
|  | params.n_channels = req->n_channels; | 
|  | params.delay = 0; | 
|  | params.ssids = req->ssids; | 
|  | params.channels = req->channels; | 
|  | params.mac_addr = req->mac_addr; | 
|  | params.mac_addr_mask = req->mac_addr_mask; | 
|  | params.no_cck = req->no_cck; | 
|  | params.pass_all = true; | 
|  | params.n_match_sets = 0; | 
|  | params.match_sets = NULL; | 
|  |  | 
|  | params.scan_plans = &scan_plan; | 
|  | params.n_scan_plans = 1; | 
|  |  | 
|  | params.type = | 
|  | iwl_mvm_get_scan_type(mvm, | 
|  | vif->type == NL80211_IFTYPE_P2P_DEVICE); | 
|  |  | 
|  | iwl_mvm_build_scan_probe(mvm, vif, ies, ¶ms); | 
|  |  | 
|  | if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_UMAC_SCAN)) { | 
|  | hcmd.id = iwl_cmd_id(SCAN_REQ_UMAC, IWL_ALWAYS_LONG_GROUP, 0); | 
|  | ret = iwl_mvm_scan_umac(mvm, vif, ¶ms, | 
|  | IWL_MVM_SCAN_REGULAR); | 
|  | } else { | 
|  | hcmd.id = SCAN_OFFLOAD_REQUEST_CMD; | 
|  | ret = iwl_mvm_scan_lmac(mvm, vif, ¶ms); | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = iwl_mvm_send_cmd(mvm, &hcmd); | 
|  | if (ret) { | 
|  | /* If the scan failed, it usually means that the FW was unable | 
|  | * to allocate the time events. Warn on it, but maybe we | 
|  | * should try to send the command again with different params. | 
|  | */ | 
|  | IWL_ERR(mvm, "Scan failed! ret %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, "Scan request was sent successfully\n"); | 
|  | mvm->scan_status |= IWL_MVM_SCAN_REGULAR; | 
|  | iwl_mvm_ref(mvm, IWL_MVM_REF_SCAN); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int iwl_mvm_sched_scan_start(struct iwl_mvm *mvm, | 
|  | struct ieee80211_vif *vif, | 
|  | struct cfg80211_sched_scan_request *req, | 
|  | struct ieee80211_scan_ies *ies, | 
|  | int type) | 
|  | { | 
|  | struct iwl_host_cmd hcmd = { | 
|  | .len = { iwl_mvm_scan_size(mvm), }, | 
|  | .data = { mvm->scan_cmd, }, | 
|  | .dataflags = { IWL_HCMD_DFL_NOCOPY, }, | 
|  | }; | 
|  | struct iwl_mvm_scan_params params = {}; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&mvm->mutex); | 
|  |  | 
|  | if (iwl_mvm_is_lar_supported(mvm) && !mvm->lar_regdom_set) { | 
|  | IWL_ERR(mvm, "sched-scan while LAR regdomain is not set\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | ret = iwl_mvm_check_running_scans(mvm, type); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* we should have failed registration if scan_cmd was NULL */ | 
|  | if (WARN_ON(!mvm->scan_cmd)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (!iwl_mvm_scan_fits(mvm, req->n_ssids, ies, req->n_channels)) | 
|  | return -ENOBUFS; | 
|  |  | 
|  | params.n_ssids = req->n_ssids; | 
|  | params.flags = req->flags; | 
|  | params.n_channels = req->n_channels; | 
|  | params.ssids = req->ssids; | 
|  | params.channels = req->channels; | 
|  | params.mac_addr = req->mac_addr; | 
|  | params.mac_addr_mask = req->mac_addr_mask; | 
|  | params.no_cck = false; | 
|  | params.pass_all =  iwl_mvm_scan_pass_all(mvm, req); | 
|  | params.n_match_sets = req->n_match_sets; | 
|  | params.match_sets = req->match_sets; | 
|  | if (!req->n_scan_plans) | 
|  | return -EINVAL; | 
|  |  | 
|  | params.n_scan_plans = req->n_scan_plans; | 
|  | params.scan_plans = req->scan_plans; | 
|  |  | 
|  | params.type = | 
|  | iwl_mvm_get_scan_type(mvm, | 
|  | vif->type == NL80211_IFTYPE_P2P_DEVICE); | 
|  |  | 
|  | /* In theory, LMAC scans can handle a 32-bit delay, but since | 
|  | * waiting for over 18 hours to start the scan is a bit silly | 
|  | * and to keep it aligned with UMAC scans (which only support | 
|  | * 16-bit delays), trim it down to 16-bits. | 
|  | */ | 
|  | if (req->delay > U16_MAX) { | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "delay value is > 16-bits, set to max possible\n"); | 
|  | params.delay = U16_MAX; | 
|  | } else { | 
|  | params.delay = req->delay; | 
|  | } | 
|  |  | 
|  | ret = iwl_mvm_config_sched_scan_profiles(mvm, req); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | iwl_mvm_build_scan_probe(mvm, vif, ies, ¶ms); | 
|  |  | 
|  | if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_UMAC_SCAN)) { | 
|  | hcmd.id = iwl_cmd_id(SCAN_REQ_UMAC, IWL_ALWAYS_LONG_GROUP, 0); | 
|  | ret = iwl_mvm_scan_umac(mvm, vif, ¶ms, type); | 
|  | } else { | 
|  | hcmd.id = SCAN_OFFLOAD_REQUEST_CMD; | 
|  | ret = iwl_mvm_scan_lmac(mvm, vif, ¶ms); | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = iwl_mvm_send_cmd(mvm, &hcmd); | 
|  | if (!ret) { | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "Sched scan request was sent successfully\n"); | 
|  | mvm->scan_status |= type; | 
|  | } else { | 
|  | /* If the scan failed, it usually means that the FW was unable | 
|  | * to allocate the time events. Warn on it, but maybe we | 
|  | * should try to send the command again with different params. | 
|  | */ | 
|  | IWL_ERR(mvm, "Sched scan failed! ret %d\n", ret); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void iwl_mvm_rx_umac_scan_complete_notif(struct iwl_mvm *mvm, | 
|  | struct iwl_rx_cmd_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = rxb_addr(rxb); | 
|  | struct iwl_umac_scan_complete *notif = (void *)pkt->data; | 
|  | u32 uid = __le32_to_cpu(notif->uid); | 
|  | bool aborted = (notif->status == IWL_SCAN_OFFLOAD_ABORTED); | 
|  |  | 
|  | if (WARN_ON(!(mvm->scan_uid_status[uid] & mvm->scan_status))) | 
|  | return; | 
|  |  | 
|  | /* if the scan is already stopping, we don't need to notify mac80211 */ | 
|  | if (mvm->scan_uid_status[uid] == IWL_MVM_SCAN_REGULAR) { | 
|  | ieee80211_scan_completed(mvm->hw, aborted); | 
|  | iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); | 
|  | } else if (mvm->scan_uid_status[uid] == IWL_MVM_SCAN_SCHED) { | 
|  | ieee80211_sched_scan_stopped(mvm->hw); | 
|  | } | 
|  |  | 
|  | mvm->scan_status &= ~mvm->scan_uid_status[uid]; | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "Scan completed, uid %u type %u, status %s, EBS status %s\n", | 
|  | uid, mvm->scan_uid_status[uid], | 
|  | notif->status == IWL_SCAN_OFFLOAD_COMPLETED ? | 
|  | "completed" : "aborted", | 
|  | iwl_mvm_ebs_status_str(notif->ebs_status)); | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "Last line %d, Last iteration %d, Time from last iteration %d\n", | 
|  | notif->last_schedule, notif->last_iter, | 
|  | __le32_to_cpu(notif->time_from_last_iter)); | 
|  |  | 
|  | if (notif->ebs_status != IWL_SCAN_EBS_SUCCESS && | 
|  | notif->ebs_status != IWL_SCAN_EBS_INACTIVE) | 
|  | mvm->last_ebs_successful = false; | 
|  |  | 
|  | mvm->scan_uid_status[uid] = 0; | 
|  | } | 
|  |  | 
|  | void iwl_mvm_rx_umac_scan_iter_complete_notif(struct iwl_mvm *mvm, | 
|  | struct iwl_rx_cmd_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = rxb_addr(rxb); | 
|  | struct iwl_umac_scan_iter_complete_notif *notif = (void *)pkt->data; | 
|  | u8 buf[256]; | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, | 
|  | "UMAC Scan iteration complete: status=0x%x scanned_channels=%d channels list: %s\n", | 
|  | notif->status, notif->scanned_channels, | 
|  | iwl_mvm_dump_channel_list(notif->results, | 
|  | notif->scanned_channels, buf, | 
|  | sizeof(buf))); | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_umac_scan_abort(struct iwl_mvm *mvm, int type) | 
|  | { | 
|  | struct iwl_umac_scan_abort cmd = {}; | 
|  | int uid, ret; | 
|  |  | 
|  | lockdep_assert_held(&mvm->mutex); | 
|  |  | 
|  | /* We should always get a valid index here, because we already | 
|  | * checked that this type of scan was running in the generic | 
|  | * code. | 
|  | */ | 
|  | uid = iwl_mvm_scan_uid_by_status(mvm, type); | 
|  | if (WARN_ON_ONCE(uid < 0)) | 
|  | return uid; | 
|  |  | 
|  | cmd.uid = cpu_to_le32(uid); | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, "Sending scan abort, uid %u\n", uid); | 
|  |  | 
|  | ret = iwl_mvm_send_cmd_pdu(mvm, | 
|  | iwl_cmd_id(SCAN_ABORT_UMAC, | 
|  | IWL_ALWAYS_LONG_GROUP, 0), | 
|  | 0, sizeof(cmd), &cmd); | 
|  | if (!ret) | 
|  | mvm->scan_uid_status[uid] = type << IWL_MVM_SCAN_STOPPING_SHIFT; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwl_mvm_scan_stop_wait(struct iwl_mvm *mvm, int type) | 
|  | { | 
|  | struct iwl_notification_wait wait_scan_done; | 
|  | static const u16 scan_done_notif[] = { SCAN_COMPLETE_UMAC, | 
|  | SCAN_OFFLOAD_COMPLETE, }; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&mvm->mutex); | 
|  |  | 
|  | iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_done, | 
|  | scan_done_notif, | 
|  | ARRAY_SIZE(scan_done_notif), | 
|  | NULL, NULL); | 
|  |  | 
|  | IWL_DEBUG_SCAN(mvm, "Preparing to stop scan, type %x\n", type); | 
|  |  | 
|  | if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_UMAC_SCAN)) | 
|  | ret = iwl_mvm_umac_scan_abort(mvm, type); | 
|  | else | 
|  | ret = iwl_mvm_lmac_scan_abort(mvm); | 
|  |  | 
|  | if (ret) { | 
|  | IWL_DEBUG_SCAN(mvm, "couldn't stop scan type %d\n", type); | 
|  | iwl_remove_notification(&mvm->notif_wait, &wait_scan_done); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = iwl_wait_notification(&mvm->notif_wait, &wait_scan_done, 1 * HZ); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int iwl_mvm_scan_size(struct iwl_mvm *mvm) | 
|  | { | 
|  | if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_UMAC_SCAN)) | 
|  | return sizeof(struct iwl_scan_req_umac) + | 
|  | sizeof(struct iwl_scan_channel_cfg_umac) * | 
|  | mvm->fw->ucode_capa.n_scan_channels + | 
|  | sizeof(struct iwl_scan_req_umac_tail); | 
|  |  | 
|  | return sizeof(struct iwl_scan_req_lmac) + | 
|  | sizeof(struct iwl_scan_channel_cfg_lmac) * | 
|  | mvm->fw->ucode_capa.n_scan_channels + | 
|  | sizeof(struct iwl_scan_probe_req); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function is used in nic restart flow, to inform mac80211 about scans | 
|  | * that was aborted by restart flow or by an assert. | 
|  | */ | 
|  | void iwl_mvm_report_scan_aborted(struct iwl_mvm *mvm) | 
|  | { | 
|  | if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_UMAC_SCAN)) { | 
|  | int uid, i; | 
|  |  | 
|  | uid = iwl_mvm_scan_uid_by_status(mvm, IWL_MVM_SCAN_REGULAR); | 
|  | if (uid >= 0) { | 
|  | ieee80211_scan_completed(mvm->hw, true); | 
|  | mvm->scan_uid_status[uid] = 0; | 
|  | } | 
|  | uid = iwl_mvm_scan_uid_by_status(mvm, IWL_MVM_SCAN_SCHED); | 
|  | if (uid >= 0 && !mvm->restart_fw) { | 
|  | ieee80211_sched_scan_stopped(mvm->hw); | 
|  | mvm->scan_uid_status[uid] = 0; | 
|  | } | 
|  |  | 
|  | /* We shouldn't have any UIDs still set.  Loop over all the | 
|  | * UIDs to make sure there's nothing left there and warn if | 
|  | * any is found. | 
|  | */ | 
|  | for (i = 0; i < mvm->max_scans; i++) { | 
|  | if (WARN_ONCE(mvm->scan_uid_status[i], | 
|  | "UMAC scan UID %d status was not cleaned\n", | 
|  | i)) | 
|  | mvm->scan_uid_status[i] = 0; | 
|  | } | 
|  | } else { | 
|  | if (mvm->scan_status & IWL_MVM_SCAN_REGULAR) | 
|  | ieee80211_scan_completed(mvm->hw, true); | 
|  |  | 
|  | /* Sched scan will be restarted by mac80211 in | 
|  | * restart_hw, so do not report if FW is about to be | 
|  | * restarted. | 
|  | */ | 
|  | if ((mvm->scan_status & IWL_MVM_SCAN_SCHED) && !mvm->restart_fw) | 
|  | ieee80211_sched_scan_stopped(mvm->hw); | 
|  | } | 
|  | } | 
|  |  | 
|  | int iwl_mvm_scan_stop(struct iwl_mvm *mvm, int type, bool notify) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!(mvm->scan_status & type)) | 
|  | return 0; | 
|  |  | 
|  | if (iwl_mvm_is_radio_killed(mvm)) { | 
|  | ret = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = iwl_mvm_scan_stop_wait(mvm, type); | 
|  | if (!ret) | 
|  | mvm->scan_status |= type << IWL_MVM_SCAN_STOPPING_SHIFT; | 
|  | out: | 
|  | /* Clear the scan status so the next scan requests will | 
|  | * succeed and mark the scan as stopping, so that the Rx | 
|  | * handler doesn't do anything, as the scan was stopped from | 
|  | * above. | 
|  | */ | 
|  | mvm->scan_status &= ~type; | 
|  |  | 
|  | if (type == IWL_MVM_SCAN_REGULAR) { | 
|  | /* Since the rx handler won't do anything now, we have | 
|  | * to release the scan reference here. | 
|  | */ | 
|  | iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); | 
|  | if (notify) | 
|  | ieee80211_scan_completed(mvm->hw, true); | 
|  | } else if (notify) { | 
|  | ieee80211_sched_scan_stopped(mvm->hw); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } |