| /* | 
 |  * Marvell Wireless LAN device driver: major functions | 
 |  * | 
 |  * Copyright (C) 2011-2014, Marvell International Ltd. | 
 |  * | 
 |  * This software file (the "File") is distributed by Marvell International | 
 |  * Ltd. under the terms of the GNU General Public License Version 2, June 1991 | 
 |  * (the "License").  You may use, redistribute and/or modify this File in | 
 |  * accordance with the terms and conditions of the License, a copy of which | 
 |  * is available by writing to the Free Software Foundation, Inc., | 
 |  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the | 
 |  * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. | 
 |  * | 
 |  * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE | 
 |  * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE | 
 |  * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about | 
 |  * this warranty disclaimer. | 
 |  */ | 
 |  | 
 | #include "main.h" | 
 | #include "wmm.h" | 
 | #include "cfg80211.h" | 
 | #include "11n.h" | 
 |  | 
 | #define VERSION	"1.0" | 
 |  | 
 | static unsigned int debug_mask = MWIFIEX_DEFAULT_DEBUG_MASK; | 
 | module_param(debug_mask, uint, 0); | 
 | MODULE_PARM_DESC(debug_mask, "bitmap for debug flags"); | 
 |  | 
 | const char driver_version[] = "mwifiex " VERSION " (%s) "; | 
 | static char *cal_data_cfg; | 
 | module_param(cal_data_cfg, charp, 0); | 
 |  | 
 | static unsigned short driver_mode; | 
 | module_param(driver_mode, ushort, 0); | 
 | MODULE_PARM_DESC(driver_mode, | 
 | 		 "station=0x1(default), ap-sta=0x3, station-p2p=0x5, ap-sta-p2p=0x7"); | 
 |  | 
 | /* | 
 |  * This function registers the device and performs all the necessary | 
 |  * initializations. | 
 |  * | 
 |  * The following initialization operations are performed - | 
 |  *      - Allocate adapter structure | 
 |  *      - Save interface specific operations table in adapter | 
 |  *      - Call interface specific initialization routine | 
 |  *      - Allocate private structures | 
 |  *      - Set default adapter structure parameters | 
 |  *      - Initialize locks | 
 |  * | 
 |  * In case of any errors during inittialization, this function also ensures | 
 |  * proper cleanup before exiting. | 
 |  */ | 
 | static int mwifiex_register(void *card, struct mwifiex_if_ops *if_ops, | 
 | 			    void **padapter) | 
 | { | 
 | 	struct mwifiex_adapter *adapter; | 
 | 	int i; | 
 |  | 
 | 	adapter = kzalloc(sizeof(struct mwifiex_adapter), GFP_KERNEL); | 
 | 	if (!adapter) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	*padapter = adapter; | 
 | 	adapter->card = card; | 
 |  | 
 | 	/* Save interface specific operations in adapter */ | 
 | 	memmove(&adapter->if_ops, if_ops, sizeof(struct mwifiex_if_ops)); | 
 | 	adapter->debug_mask = debug_mask; | 
 |  | 
 | 	/* card specific initialization has been deferred until now .. */ | 
 | 	if (adapter->if_ops.init_if) | 
 | 		if (adapter->if_ops.init_if(adapter)) | 
 | 			goto error; | 
 |  | 
 | 	adapter->priv_num = 0; | 
 |  | 
 | 	for (i = 0; i < MWIFIEX_MAX_BSS_NUM; i++) { | 
 | 		/* Allocate memory for private structure */ | 
 | 		adapter->priv[i] = | 
 | 			kzalloc(sizeof(struct mwifiex_private), GFP_KERNEL); | 
 | 		if (!adapter->priv[i]) | 
 | 			goto error; | 
 |  | 
 | 		adapter->priv[i]->adapter = adapter; | 
 | 		adapter->priv_num++; | 
 | 	} | 
 | 	mwifiex_init_lock_list(adapter); | 
 |  | 
 | 	setup_timer(&adapter->cmd_timer, mwifiex_cmd_timeout_func, | 
 | 		    (unsigned long)adapter); | 
 |  | 
 | 	return 0; | 
 |  | 
 | error: | 
 | 	mwifiex_dbg(adapter, ERROR, | 
 | 		    "info: leave mwifiex_register with error\n"); | 
 |  | 
 | 	for (i = 0; i < adapter->priv_num; i++) | 
 | 		kfree(adapter->priv[i]); | 
 |  | 
 | 	kfree(adapter); | 
 |  | 
 | 	return -1; | 
 | } | 
 |  | 
 | /* | 
 |  * This function unregisters the device and performs all the necessary | 
 |  * cleanups. | 
 |  * | 
 |  * The following cleanup operations are performed - | 
 |  *      - Free the timers | 
 |  *      - Free beacon buffers | 
 |  *      - Free private structures | 
 |  *      - Free adapter structure | 
 |  */ | 
 | static int mwifiex_unregister(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	s32 i; | 
 |  | 
 | 	if (adapter->if_ops.cleanup_if) | 
 | 		adapter->if_ops.cleanup_if(adapter); | 
 |  | 
 | 	del_timer_sync(&adapter->cmd_timer); | 
 |  | 
 | 	/* Free private structures */ | 
 | 	for (i = 0; i < adapter->priv_num; i++) { | 
 | 		if (adapter->priv[i]) { | 
 | 			mwifiex_free_curr_bcn(adapter->priv[i]); | 
 | 			kfree(adapter->priv[i]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	vfree(adapter->chan_stats); | 
 | 	kfree(adapter); | 
 | 	return 0; | 
 | } | 
 |  | 
 | void mwifiex_queue_main_work(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&adapter->main_proc_lock, flags); | 
 | 	if (adapter->mwifiex_processing) { | 
 | 		adapter->more_task_flag = true; | 
 | 		spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | 
 | 	} else { | 
 | 		spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | 
 | 		queue_work(adapter->workqueue, &adapter->main_work); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL_GPL(mwifiex_queue_main_work); | 
 |  | 
 | static void mwifiex_queue_rx_work(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&adapter->rx_proc_lock, flags); | 
 | 	if (adapter->rx_processing) { | 
 | 		spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | 
 | 	} else { | 
 | 		spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | 
 | 		queue_work(adapter->rx_workqueue, &adapter->rx_work); | 
 | 	} | 
 | } | 
 |  | 
 | static int mwifiex_process_rx(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct sk_buff *skb; | 
 | 	struct mwifiex_rxinfo *rx_info; | 
 |  | 
 | 	spin_lock_irqsave(&adapter->rx_proc_lock, flags); | 
 | 	if (adapter->rx_processing || adapter->rx_locked) { | 
 | 		spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | 
 | 		goto exit_rx_proc; | 
 | 	} else { | 
 | 		adapter->rx_processing = true; | 
 | 		spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | 
 | 	} | 
 |  | 
 | 	/* Check for Rx data */ | 
 | 	while ((skb = skb_dequeue(&adapter->rx_data_q))) { | 
 | 		atomic_dec(&adapter->rx_pending); | 
 | 		if ((adapter->delay_main_work || | 
 | 		     adapter->iface_type == MWIFIEX_USB) && | 
 | 		    (atomic_read(&adapter->rx_pending) < LOW_RX_PENDING)) { | 
 | 			if (adapter->if_ops.submit_rem_rx_urbs) | 
 | 				adapter->if_ops.submit_rem_rx_urbs(adapter); | 
 | 			adapter->delay_main_work = false; | 
 | 			mwifiex_queue_main_work(adapter); | 
 | 		} | 
 | 		rx_info = MWIFIEX_SKB_RXCB(skb); | 
 | 		if (rx_info->buf_type == MWIFIEX_TYPE_AGGR_DATA) { | 
 | 			if (adapter->if_ops.deaggr_pkt) | 
 | 				adapter->if_ops.deaggr_pkt(adapter, skb); | 
 | 			dev_kfree_skb_any(skb); | 
 | 		} else { | 
 | 			mwifiex_handle_rx_packet(adapter, skb); | 
 | 		} | 
 | 	} | 
 | 	spin_lock_irqsave(&adapter->rx_proc_lock, flags); | 
 | 	adapter->rx_processing = false; | 
 | 	spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | 
 |  | 
 | exit_rx_proc: | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * The main process. | 
 |  * | 
 |  * This function is the main procedure of the driver and handles various driver | 
 |  * operations. It runs in a loop and provides the core functionalities. | 
 |  * | 
 |  * The main responsibilities of this function are - | 
 |  *      - Ensure concurrency control | 
 |  *      - Handle pending interrupts and call interrupt handlers | 
 |  *      - Wake up the card if required | 
 |  *      - Handle command responses and call response handlers | 
 |  *      - Handle events and call event handlers | 
 |  *      - Execute pending commands | 
 |  *      - Transmit pending data packets | 
 |  */ | 
 | int mwifiex_main_process(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	int ret = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&adapter->main_proc_lock, flags); | 
 |  | 
 | 	/* Check if already processing */ | 
 | 	if (adapter->mwifiex_processing || adapter->main_locked) { | 
 | 		adapter->more_task_flag = true; | 
 | 		spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | 
 | 		goto exit_main_proc; | 
 | 	} else { | 
 | 		adapter->mwifiex_processing = true; | 
 | 		spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | 
 | 	} | 
 | process_start: | 
 | 	do { | 
 | 		if ((adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) || | 
 | 		    (adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY)) | 
 | 			break; | 
 |  | 
 | 		/* For non-USB interfaces, If we process interrupts first, it | 
 | 		 * would increase RX pending even further. Avoid this by | 
 | 		 * checking if rx_pending has crossed high threshold and | 
 | 		 * schedule rx work queue and then process interrupts. | 
 | 		 * For USB interface, there are no interrupts. We already have | 
 | 		 * HIGH_RX_PENDING check in usb.c | 
 | 		 */ | 
 | 		if (atomic_read(&adapter->rx_pending) >= HIGH_RX_PENDING && | 
 | 		    adapter->iface_type != MWIFIEX_USB) { | 
 | 			adapter->delay_main_work = true; | 
 | 			mwifiex_queue_rx_work(adapter); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* Handle pending interrupt if any */ | 
 | 		if (adapter->int_status) { | 
 | 			if (adapter->hs_activated) | 
 | 				mwifiex_process_hs_config(adapter); | 
 | 			if (adapter->if_ops.process_int_status) | 
 | 				adapter->if_ops.process_int_status(adapter); | 
 | 		} | 
 |  | 
 | 		if (adapter->rx_work_enabled && adapter->data_received) | 
 | 			mwifiex_queue_rx_work(adapter); | 
 |  | 
 | 		/* Need to wake up the card ? */ | 
 | 		if ((adapter->ps_state == PS_STATE_SLEEP) && | 
 | 		    (adapter->pm_wakeup_card_req && | 
 | 		     !adapter->pm_wakeup_fw_try) && | 
 | 		    (is_command_pending(adapter) || | 
 | 		     !skb_queue_empty(&adapter->tx_data_q) || | 
 | 		     !mwifiex_bypass_txlist_empty(adapter) || | 
 | 		     !mwifiex_wmm_lists_empty(adapter))) { | 
 | 			adapter->pm_wakeup_fw_try = true; | 
 | 			mod_timer(&adapter->wakeup_timer, jiffies + (HZ*3)); | 
 | 			adapter->if_ops.wakeup(adapter); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (IS_CARD_RX_RCVD(adapter)) { | 
 | 			adapter->data_received = false; | 
 | 			adapter->pm_wakeup_fw_try = false; | 
 | 			del_timer(&adapter->wakeup_timer); | 
 | 			if (adapter->ps_state == PS_STATE_SLEEP) | 
 | 				adapter->ps_state = PS_STATE_AWAKE; | 
 | 		} else { | 
 | 			/* We have tried to wakeup the card already */ | 
 | 			if (adapter->pm_wakeup_fw_try) | 
 | 				break; | 
 | 			if (adapter->ps_state != PS_STATE_AWAKE) | 
 | 				break; | 
 | 			if (adapter->tx_lock_flag) { | 
 | 				if (adapter->iface_type == MWIFIEX_USB) { | 
 | 					if (!adapter->usb_mc_setup) | 
 | 						break; | 
 | 				} else | 
 | 					break; | 
 | 			} | 
 |  | 
 | 			if ((!adapter->scan_chan_gap_enabled && | 
 | 			     adapter->scan_processing) || adapter->data_sent || | 
 | 			     mwifiex_is_tdls_chan_switching | 
 | 			     (mwifiex_get_priv(adapter, | 
 | 					       MWIFIEX_BSS_ROLE_STA)) || | 
 | 			    (mwifiex_wmm_lists_empty(adapter) && | 
 | 			     mwifiex_bypass_txlist_empty(adapter) && | 
 | 			     skb_queue_empty(&adapter->tx_data_q))) { | 
 | 				if (adapter->cmd_sent || adapter->curr_cmd || | 
 | 					!mwifiex_is_send_cmd_allowed | 
 | 						(mwifiex_get_priv(adapter, | 
 | 						MWIFIEX_BSS_ROLE_STA)) || | 
 | 				    (!is_command_pending(adapter))) | 
 | 					break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Check for event */ | 
 | 		if (adapter->event_received) { | 
 | 			adapter->event_received = false; | 
 | 			mwifiex_process_event(adapter); | 
 | 		} | 
 |  | 
 | 		/* Check for Cmd Resp */ | 
 | 		if (adapter->cmd_resp_received) { | 
 | 			adapter->cmd_resp_received = false; | 
 | 			mwifiex_process_cmdresp(adapter); | 
 |  | 
 | 			/* call mwifiex back when init_fw is done */ | 
 | 			if (adapter->hw_status == MWIFIEX_HW_STATUS_INIT_DONE) { | 
 | 				adapter->hw_status = MWIFIEX_HW_STATUS_READY; | 
 | 				mwifiex_init_fw_complete(adapter); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Check if we need to confirm Sleep Request | 
 | 		   received previously */ | 
 | 		if (adapter->ps_state == PS_STATE_PRE_SLEEP) { | 
 | 			if (!adapter->cmd_sent && !adapter->curr_cmd) | 
 | 				mwifiex_check_ps_cond(adapter); | 
 | 		} | 
 |  | 
 | 		/* * The ps_state may have been changed during processing of | 
 | 		 * Sleep Request event. | 
 | 		 */ | 
 | 		if ((adapter->ps_state == PS_STATE_SLEEP) || | 
 | 		    (adapter->ps_state == PS_STATE_PRE_SLEEP) || | 
 | 		    (adapter->ps_state == PS_STATE_SLEEP_CFM)) { | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (adapter->tx_lock_flag) { | 
 | 			if (adapter->iface_type == MWIFIEX_USB) { | 
 | 				if (!adapter->usb_mc_setup) | 
 | 					continue; | 
 | 			} else | 
 | 				continue; | 
 | 		} | 
 |  | 
 | 		if (!adapter->cmd_sent && !adapter->curr_cmd && | 
 | 		    mwifiex_is_send_cmd_allowed | 
 | 		    (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) { | 
 | 			if (mwifiex_exec_next_cmd(adapter) == -1) { | 
 | 				ret = -1; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/** If USB Multi channel setup ongoing, | 
 | 		 *  wait for ready to tx data. | 
 | 		 */ | 
 | 		if (adapter->iface_type == MWIFIEX_USB && | 
 | 		    adapter->usb_mc_setup) | 
 | 			continue; | 
 |  | 
 | 		if ((adapter->scan_chan_gap_enabled || | 
 | 		     !adapter->scan_processing) && | 
 | 		    !adapter->data_sent && | 
 | 		    !skb_queue_empty(&adapter->tx_data_q)) { | 
 | 			mwifiex_process_tx_queue(adapter); | 
 | 			if (adapter->hs_activated) { | 
 | 				adapter->is_hs_configured = false; | 
 | 				mwifiex_hs_activated_event | 
 | 					(mwifiex_get_priv | 
 | 					(adapter, MWIFIEX_BSS_ROLE_ANY), | 
 | 					false); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if ((adapter->scan_chan_gap_enabled || | 
 | 		     !adapter->scan_processing) && | 
 | 		    !adapter->data_sent && | 
 | 		    !mwifiex_bypass_txlist_empty(adapter) && | 
 | 		    !mwifiex_is_tdls_chan_switching | 
 | 			(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) { | 
 | 			mwifiex_process_bypass_tx(adapter); | 
 | 			if (adapter->hs_activated) { | 
 | 				adapter->is_hs_configured = false; | 
 | 				mwifiex_hs_activated_event | 
 | 					(mwifiex_get_priv | 
 | 					 (adapter, MWIFIEX_BSS_ROLE_ANY), | 
 | 					 false); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if ((adapter->scan_chan_gap_enabled || | 
 | 		     !adapter->scan_processing) && | 
 | 		    !adapter->data_sent && !mwifiex_wmm_lists_empty(adapter) && | 
 | 		    !mwifiex_is_tdls_chan_switching | 
 | 			(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) { | 
 | 			mwifiex_wmm_process_tx(adapter); | 
 | 			if (adapter->hs_activated) { | 
 | 				adapter->is_hs_configured = false; | 
 | 				mwifiex_hs_activated_event | 
 | 					(mwifiex_get_priv | 
 | 					 (adapter, MWIFIEX_BSS_ROLE_ANY), | 
 | 					 false); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (adapter->delay_null_pkt && !adapter->cmd_sent && | 
 | 		    !adapter->curr_cmd && !is_command_pending(adapter) && | 
 | 		    (mwifiex_wmm_lists_empty(adapter) && | 
 | 		     mwifiex_bypass_txlist_empty(adapter) && | 
 | 		     skb_queue_empty(&adapter->tx_data_q))) { | 
 | 			if (!mwifiex_send_null_packet | 
 | 			    (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA), | 
 | 			     MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET | | 
 | 			     MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET)) { | 
 | 				adapter->delay_null_pkt = false; | 
 | 				adapter->ps_state = PS_STATE_SLEEP; | 
 | 			} | 
 | 			break; | 
 | 		} | 
 | 	} while (true); | 
 |  | 
 | 	spin_lock_irqsave(&adapter->main_proc_lock, flags); | 
 | 	if (adapter->more_task_flag) { | 
 | 		adapter->more_task_flag = false; | 
 | 		spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | 
 | 		goto process_start; | 
 | 	} | 
 | 	adapter->mwifiex_processing = false; | 
 | 	spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | 
 |  | 
 | exit_main_proc: | 
 | 	if (adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) | 
 | 		mwifiex_shutdown_drv(adapter); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(mwifiex_main_process); | 
 |  | 
 | /* | 
 |  * This function frees the adapter structure. | 
 |  * | 
 |  * Additionally, this closes the netlink socket, frees the timers | 
 |  * and private structures. | 
 |  */ | 
 | static void mwifiex_free_adapter(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	if (!adapter) { | 
 | 		pr_err("%s: adapter is NULL\n", __func__); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	mwifiex_unregister(adapter); | 
 | 	pr_debug("info: %s: free adapter\n", __func__); | 
 | } | 
 |  | 
 | /* | 
 |  * This function cancels all works in the queue and destroys | 
 |  * the main workqueue. | 
 |  */ | 
 | static void mwifiex_terminate_workqueue(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	flush_workqueue(adapter->workqueue); | 
 | 	destroy_workqueue(adapter->workqueue); | 
 | 	adapter->workqueue = NULL; | 
 |  | 
 | 	if (adapter->rx_workqueue) { | 
 | 		flush_workqueue(adapter->rx_workqueue); | 
 | 		destroy_workqueue(adapter->rx_workqueue); | 
 | 		adapter->rx_workqueue = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * This function gets firmware and initializes it. | 
 |  * | 
 |  * The main initialization steps followed are - | 
 |  *      - Download the correct firmware to card | 
 |  *      - Issue the init commands to firmware | 
 |  */ | 
 | static void mwifiex_fw_dpc(const struct firmware *firmware, void *context) | 
 | { | 
 | 	int ret; | 
 | 	char fmt[64]; | 
 | 	struct mwifiex_private *priv; | 
 | 	struct mwifiex_adapter *adapter = context; | 
 | 	struct mwifiex_fw_image fw; | 
 | 	struct semaphore *sem = adapter->card_sem; | 
 | 	bool init_failed = false; | 
 | 	struct wireless_dev *wdev; | 
 |  | 
 | 	if (!firmware) { | 
 | 		mwifiex_dbg(adapter, ERROR, | 
 | 			    "Failed to get firmware %s\n", adapter->fw_name); | 
 | 		goto err_dnld_fw; | 
 | 	} | 
 |  | 
 | 	memset(&fw, 0, sizeof(struct mwifiex_fw_image)); | 
 | 	adapter->firmware = firmware; | 
 | 	fw.fw_buf = (u8 *) adapter->firmware->data; | 
 | 	fw.fw_len = adapter->firmware->size; | 
 |  | 
 | 	if (adapter->if_ops.dnld_fw) | 
 | 		ret = adapter->if_ops.dnld_fw(adapter, &fw); | 
 | 	else | 
 | 		ret = mwifiex_dnld_fw(adapter, &fw); | 
 | 	if (ret == -1) | 
 | 		goto err_dnld_fw; | 
 |  | 
 | 	mwifiex_dbg(adapter, MSG, "WLAN FW is active\n"); | 
 |  | 
 | 	if (cal_data_cfg) { | 
 | 		if ((request_firmware(&adapter->cal_data, cal_data_cfg, | 
 | 				      adapter->dev)) < 0) | 
 | 			mwifiex_dbg(adapter, ERROR, | 
 | 				    "Cal data request_firmware() failed\n"); | 
 | 	} | 
 |  | 
 | 	/* enable host interrupt after fw dnld is successful */ | 
 | 	if (adapter->if_ops.enable_int) { | 
 | 		if (adapter->if_ops.enable_int(adapter)) | 
 | 			goto err_dnld_fw; | 
 | 	} | 
 |  | 
 | 	adapter->init_wait_q_woken = false; | 
 | 	ret = mwifiex_init_fw(adapter); | 
 | 	if (ret == -1) { | 
 | 		goto err_init_fw; | 
 | 	} else if (!ret) { | 
 | 		adapter->hw_status = MWIFIEX_HW_STATUS_READY; | 
 | 		goto done; | 
 | 	} | 
 | 	/* Wait for mwifiex_init to complete */ | 
 | 	wait_event_interruptible(adapter->init_wait_q, | 
 | 				 adapter->init_wait_q_woken); | 
 | 	if (adapter->hw_status != MWIFIEX_HW_STATUS_READY) | 
 | 		goto err_init_fw; | 
 |  | 
 | 	priv = adapter->priv[MWIFIEX_BSS_ROLE_STA]; | 
 | 	if (mwifiex_register_cfg80211(adapter)) { | 
 | 		mwifiex_dbg(adapter, ERROR, | 
 | 			    "cannot register with cfg80211\n"); | 
 | 		goto err_init_fw; | 
 | 	} | 
 |  | 
 | 	if (mwifiex_init_channel_scan_gap(adapter)) { | 
 | 		mwifiex_dbg(adapter, ERROR, | 
 | 			    "could not init channel stats table\n"); | 
 | 		goto err_init_fw; | 
 | 	} | 
 |  | 
 | 	if (driver_mode) { | 
 | 		driver_mode &= MWIFIEX_DRIVER_MODE_BITMASK; | 
 | 		driver_mode |= MWIFIEX_DRIVER_MODE_STA; | 
 | 	} | 
 |  | 
 | 	rtnl_lock(); | 
 | 	/* Create station interface by default */ | 
 | 	wdev = mwifiex_add_virtual_intf(adapter->wiphy, "mlan%d", NET_NAME_ENUM, | 
 | 					NL80211_IFTYPE_STATION, NULL, NULL); | 
 | 	if (IS_ERR(wdev)) { | 
 | 		mwifiex_dbg(adapter, ERROR, | 
 | 			    "cannot create default STA interface\n"); | 
 | 		rtnl_unlock(); | 
 | 		goto err_add_intf; | 
 | 	} | 
 |  | 
 | 	if (driver_mode & MWIFIEX_DRIVER_MODE_UAP) { | 
 | 		wdev = mwifiex_add_virtual_intf(adapter->wiphy, "uap%d", NET_NAME_ENUM, | 
 | 						NL80211_IFTYPE_AP, NULL, NULL); | 
 | 		if (IS_ERR(wdev)) { | 
 | 			mwifiex_dbg(adapter, ERROR, | 
 | 				    "cannot create AP interface\n"); | 
 | 			rtnl_unlock(); | 
 | 			goto err_add_intf; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (driver_mode & MWIFIEX_DRIVER_MODE_P2P) { | 
 | 		wdev = mwifiex_add_virtual_intf(adapter->wiphy, "p2p%d", NET_NAME_ENUM, | 
 | 						NL80211_IFTYPE_P2P_CLIENT, NULL, | 
 | 						NULL); | 
 | 		if (IS_ERR(wdev)) { | 
 | 			mwifiex_dbg(adapter, ERROR, | 
 | 				    "cannot create p2p client interface\n"); | 
 | 			rtnl_unlock(); | 
 | 			goto err_add_intf; | 
 | 		} | 
 | 	} | 
 | 	rtnl_unlock(); | 
 |  | 
 | 	mwifiex_drv_get_driver_version(adapter, fmt, sizeof(fmt) - 1); | 
 | 	mwifiex_dbg(adapter, MSG, "driver_version = %s\n", fmt); | 
 | 	goto done; | 
 |  | 
 | err_add_intf: | 
 | 	wiphy_unregister(adapter->wiphy); | 
 | 	wiphy_free(adapter->wiphy); | 
 | err_init_fw: | 
 | 	if (adapter->if_ops.disable_int) | 
 | 		adapter->if_ops.disable_int(adapter); | 
 | err_dnld_fw: | 
 | 	mwifiex_dbg(adapter, ERROR, | 
 | 		    "info: %s: unregister device\n", __func__); | 
 | 	if (adapter->if_ops.unregister_dev) | 
 | 		adapter->if_ops.unregister_dev(adapter); | 
 |  | 
 | 	if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) { | 
 | 		pr_debug("info: %s: shutdown mwifiex\n", __func__); | 
 | 		adapter->init_wait_q_woken = false; | 
 |  | 
 | 		if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS) | 
 | 			wait_event_interruptible(adapter->init_wait_q, | 
 | 						 adapter->init_wait_q_woken); | 
 | 	} | 
 | 	adapter->surprise_removed = true; | 
 | 	mwifiex_terminate_workqueue(adapter); | 
 | 	init_failed = true; | 
 | done: | 
 | 	if (adapter->cal_data) { | 
 | 		release_firmware(adapter->cal_data); | 
 | 		adapter->cal_data = NULL; | 
 | 	} | 
 | 	if (adapter->firmware) { | 
 | 		release_firmware(adapter->firmware); | 
 | 		adapter->firmware = NULL; | 
 | 	} | 
 | 	if (init_failed) | 
 | 		mwifiex_free_adapter(adapter); | 
 | 	up(sem); | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  * This function initializes the hardware and gets firmware. | 
 |  */ | 
 | static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = request_firmware_nowait(THIS_MODULE, 1, adapter->fw_name, | 
 | 				      adapter->dev, GFP_KERNEL, adapter, | 
 | 				      mwifiex_fw_dpc); | 
 | 	if (ret < 0) | 
 | 		mwifiex_dbg(adapter, ERROR, | 
 | 			    "request_firmware_nowait error %d\n", ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * CFG802.11 network device handler for open. | 
 |  * | 
 |  * Starts the data queue. | 
 |  */ | 
 | static int | 
 | mwifiex_open(struct net_device *dev) | 
 | { | 
 | 	netif_carrier_off(dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * CFG802.11 network device handler for close. | 
 |  */ | 
 | static int | 
 | mwifiex_close(struct net_device *dev) | 
 | { | 
 | 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | 
 |  | 
 | 	if (priv->scan_request) { | 
 | 		mwifiex_dbg(priv->adapter, INFO, | 
 | 			    "aborting scan on ndo_stop\n"); | 
 | 		cfg80211_scan_done(priv->scan_request, 1); | 
 | 		priv->scan_request = NULL; | 
 | 		priv->scan_aborting = true; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static bool | 
 | mwifiex_bypass_tx_queue(struct mwifiex_private *priv, | 
 | 			struct sk_buff *skb) | 
 | { | 
 | 	struct ethhdr *eth_hdr = (struct ethhdr *)skb->data; | 
 |  | 
 | 	if (ntohs(eth_hdr->h_proto) == ETH_P_PAE || | 
 | 	    mwifiex_is_skb_mgmt_frame(skb) || | 
 | 	    (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA && | 
 | 	     ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && | 
 | 	     (ntohs(eth_hdr->h_proto) == ETH_P_TDLS))) { | 
 | 		mwifiex_dbg(priv->adapter, DATA, | 
 | 			    "bypass txqueue; eth type %#x, mgmt %d\n", | 
 | 			     ntohs(eth_hdr->h_proto), | 
 | 			     mwifiex_is_skb_mgmt_frame(skb)); | 
 | 		return true; | 
 | 	} | 
 |  | 
 | 	return false; | 
 | } | 
 | /* | 
 |  * Add buffer into wmm tx queue and queue work to transmit it. | 
 |  */ | 
 | int mwifiex_queue_tx_pkt(struct mwifiex_private *priv, struct sk_buff *skb) | 
 | { | 
 | 	struct netdev_queue *txq; | 
 | 	int index = mwifiex_1d_to_wmm_queue[skb->priority]; | 
 |  | 
 | 	if (atomic_inc_return(&priv->wmm_tx_pending[index]) >= MAX_TX_PENDING) { | 
 | 		txq = netdev_get_tx_queue(priv->netdev, index); | 
 | 		if (!netif_tx_queue_stopped(txq)) { | 
 | 			netif_tx_stop_queue(txq); | 
 | 			mwifiex_dbg(priv->adapter, DATA, | 
 | 				    "stop queue: %d\n", index); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (mwifiex_bypass_tx_queue(priv, skb)) { | 
 | 		atomic_inc(&priv->adapter->tx_pending); | 
 | 		atomic_inc(&priv->adapter->bypass_tx_pending); | 
 | 		mwifiex_wmm_add_buf_bypass_txqueue(priv, skb); | 
 | 	 } else { | 
 | 		atomic_inc(&priv->adapter->tx_pending); | 
 | 		mwifiex_wmm_add_buf_txqueue(priv, skb); | 
 | 	 } | 
 |  | 
 | 	mwifiex_queue_main_work(priv->adapter); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct sk_buff * | 
 | mwifiex_clone_skb_for_tx_status(struct mwifiex_private *priv, | 
 | 				struct sk_buff *skb, u8 flag, u64 *cookie) | 
 | { | 
 | 	struct sk_buff *orig_skb = skb; | 
 | 	struct mwifiex_txinfo *tx_info, *orig_tx_info; | 
 |  | 
 | 	skb = skb_clone(skb, GFP_ATOMIC); | 
 | 	if (skb) { | 
 | 		unsigned long flags; | 
 | 		int id; | 
 |  | 
 | 		spin_lock_irqsave(&priv->ack_status_lock, flags); | 
 | 		id = idr_alloc(&priv->ack_status_frames, orig_skb, | 
 | 			       1, 0x10, GFP_ATOMIC); | 
 | 		spin_unlock_irqrestore(&priv->ack_status_lock, flags); | 
 |  | 
 | 		if (id >= 0) { | 
 | 			tx_info = MWIFIEX_SKB_TXCB(skb); | 
 | 			tx_info->ack_frame_id = id; | 
 | 			tx_info->flags |= flag; | 
 | 			orig_tx_info = MWIFIEX_SKB_TXCB(orig_skb); | 
 | 			orig_tx_info->ack_frame_id = id; | 
 | 			orig_tx_info->flags |= flag; | 
 |  | 
 | 			if (flag == MWIFIEX_BUF_FLAG_ACTION_TX_STATUS && cookie) | 
 | 				orig_tx_info->cookie = *cookie; | 
 |  | 
 | 		} else if (skb_shared(skb)) { | 
 | 			kfree_skb(orig_skb); | 
 | 		} else { | 
 | 			kfree_skb(skb); | 
 | 			skb = orig_skb; | 
 | 		} | 
 | 	} else { | 
 | 		/* couldn't clone -- lose tx status ... */ | 
 | 		skb = orig_skb; | 
 | 	} | 
 |  | 
 | 	return skb; | 
 | } | 
 |  | 
 | /* | 
 |  * CFG802.11 network device handler for data transmission. | 
 |  */ | 
 | static int | 
 | mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
 | { | 
 | 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | 
 | 	struct sk_buff *new_skb; | 
 | 	struct mwifiex_txinfo *tx_info; | 
 | 	bool multicast; | 
 |  | 
 | 	mwifiex_dbg(priv->adapter, DATA, | 
 | 		    "data: %lu BSS(%d-%d): Data <= kernel\n", | 
 | 		    jiffies, priv->bss_type, priv->bss_num); | 
 |  | 
 | 	if (priv->adapter->surprise_removed) { | 
 | 		kfree_skb(skb); | 
 | 		priv->stats.tx_dropped++; | 
 | 		return 0; | 
 | 	} | 
 | 	if (!skb->len || (skb->len > ETH_FRAME_LEN)) { | 
 | 		mwifiex_dbg(priv->adapter, ERROR, | 
 | 			    "Tx: bad skb len %d\n", skb->len); | 
 | 		kfree_skb(skb); | 
 | 		priv->stats.tx_dropped++; | 
 | 		return 0; | 
 | 	} | 
 | 	if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) { | 
 | 		mwifiex_dbg(priv->adapter, DATA, | 
 | 			    "data: Tx: insufficient skb headroom %d\n", | 
 | 			    skb_headroom(skb)); | 
 | 		/* Insufficient skb headroom - allocate a new skb */ | 
 | 		new_skb = | 
 | 			skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN); | 
 | 		if (unlikely(!new_skb)) { | 
 | 			mwifiex_dbg(priv->adapter, ERROR, | 
 | 				    "Tx: cannot alloca new_skb\n"); | 
 | 			kfree_skb(skb); | 
 | 			priv->stats.tx_dropped++; | 
 | 			return 0; | 
 | 		} | 
 | 		kfree_skb(skb); | 
 | 		skb = new_skb; | 
 | 		mwifiex_dbg(priv->adapter, INFO, | 
 | 			    "info: new skb headroomd %d\n", | 
 | 			    skb_headroom(skb)); | 
 | 	} | 
 |  | 
 | 	tx_info = MWIFIEX_SKB_TXCB(skb); | 
 | 	memset(tx_info, 0, sizeof(*tx_info)); | 
 | 	tx_info->bss_num = priv->bss_num; | 
 | 	tx_info->bss_type = priv->bss_type; | 
 | 	tx_info->pkt_len = skb->len; | 
 |  | 
 | 	multicast = is_multicast_ether_addr(skb->data); | 
 |  | 
 | 	if (unlikely(!multicast && skb->sk && | 
 | 		     skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS && | 
 | 		     priv->adapter->fw_api_ver == MWIFIEX_FW_V15)) | 
 | 		skb = mwifiex_clone_skb_for_tx_status(priv, | 
 | 						      skb, | 
 | 					MWIFIEX_BUF_FLAG_EAPOL_TX_STATUS, NULL); | 
 |  | 
 | 	/* Record the current time the packet was queued; used to | 
 | 	 * determine the amount of time the packet was queued in | 
 | 	 * the driver before it was sent to the firmware. | 
 | 	 * The delay is then sent along with the packet to the | 
 | 	 * firmware for aggregate delay calculation for stats and | 
 | 	 * MSDU lifetime expiry. | 
 | 	 */ | 
 | 	__net_timestamp(skb); | 
 |  | 
 | 	if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && | 
 | 	    priv->bss_type == MWIFIEX_BSS_TYPE_STA && | 
 | 	    !ether_addr_equal_unaligned(priv->cfg_bssid, skb->data)) { | 
 | 		if (priv->adapter->auto_tdls && priv->check_tdls_tx) | 
 | 			mwifiex_tdls_check_tx(priv, skb); | 
 | 	} | 
 |  | 
 | 	mwifiex_queue_tx_pkt(priv, skb); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * CFG802.11 network device handler for setting MAC address. | 
 |  */ | 
 | static int | 
 | mwifiex_set_mac_address(struct net_device *dev, void *addr) | 
 | { | 
 | 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | 
 | 	struct sockaddr *hw_addr = addr; | 
 | 	int ret; | 
 |  | 
 | 	memcpy(priv->curr_addr, hw_addr->sa_data, ETH_ALEN); | 
 |  | 
 | 	/* Send request to firmware */ | 
 | 	ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_MAC_ADDRESS, | 
 | 			       HostCmd_ACT_GEN_SET, 0, NULL, true); | 
 |  | 
 | 	if (!ret) | 
 | 		memcpy(priv->netdev->dev_addr, priv->curr_addr, ETH_ALEN); | 
 | 	else | 
 | 		mwifiex_dbg(priv->adapter, ERROR, | 
 | 			    "set mac address failed: ret=%d\n", ret); | 
 |  | 
 | 	memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * CFG802.11 network device handler for setting multicast list. | 
 |  */ | 
 | static void mwifiex_set_multicast_list(struct net_device *dev) | 
 | { | 
 | 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | 
 | 	struct mwifiex_multicast_list mcast_list; | 
 |  | 
 | 	if (dev->flags & IFF_PROMISC) { | 
 | 		mcast_list.mode = MWIFIEX_PROMISC_MODE; | 
 | 	} else if (dev->flags & IFF_ALLMULTI || | 
 | 		   netdev_mc_count(dev) > MWIFIEX_MAX_MULTICAST_LIST_SIZE) { | 
 | 		mcast_list.mode = MWIFIEX_ALL_MULTI_MODE; | 
 | 	} else { | 
 | 		mcast_list.mode = MWIFIEX_MULTICAST_MODE; | 
 | 		mcast_list.num_multicast_addr = | 
 | 			mwifiex_copy_mcast_addr(&mcast_list, dev); | 
 | 	} | 
 | 	mwifiex_request_set_multicast_list(priv, &mcast_list); | 
 | } | 
 |  | 
 | /* | 
 |  * CFG802.11 network device handler for transmission timeout. | 
 |  */ | 
 | static void | 
 | mwifiex_tx_timeout(struct net_device *dev) | 
 | { | 
 | 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | 
 |  | 
 | 	priv->num_tx_timeout++; | 
 | 	priv->tx_timeout_cnt++; | 
 | 	mwifiex_dbg(priv->adapter, ERROR, | 
 | 		    "%lu : Tx timeout(#%d), bss_type-num = %d-%d\n", | 
 | 		    jiffies, priv->tx_timeout_cnt, priv->bss_type, | 
 | 		    priv->bss_num); | 
 | 	mwifiex_set_trans_start(dev); | 
 |  | 
 | 	if (priv->tx_timeout_cnt > TX_TIMEOUT_THRESHOLD && | 
 | 	    priv->adapter->if_ops.card_reset) { | 
 | 		mwifiex_dbg(priv->adapter, ERROR, | 
 | 			    "tx_timeout_cnt exceeds threshold.\t" | 
 | 			    "Triggering card reset!\n"); | 
 | 		priv->adapter->if_ops.card_reset(priv->adapter); | 
 | 	} | 
 | } | 
 |  | 
 | void mwifiex_multi_chan_resync(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	struct usb_card_rec *card = adapter->card; | 
 | 	struct mwifiex_private *priv; | 
 | 	u16 tx_buf_size; | 
 | 	int i, ret; | 
 |  | 
 | 	card->mc_resync_flag = true; | 
 | 	for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { | 
 | 		if (atomic_read(&card->port[i].tx_data_urb_pending)) { | 
 | 			mwifiex_dbg(adapter, WARN, "pending data urb in sys\n"); | 
 | 			return; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	card->mc_resync_flag = false; | 
 | 	tx_buf_size = 0xffff; | 
 | 	priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); | 
 | 	ret = mwifiex_send_cmd(priv, HostCmd_CMD_RECONFIGURE_TX_BUFF, | 
 | 			       HostCmd_ACT_GEN_SET, 0, &tx_buf_size, false); | 
 | 	if (ret) | 
 | 		mwifiex_dbg(adapter, ERROR, | 
 | 			    "send reconfig tx buf size cmd err\n"); | 
 | } | 
 | EXPORT_SYMBOL_GPL(mwifiex_multi_chan_resync); | 
 |  | 
 | void mwifiex_drv_info_dump(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	void *p; | 
 | 	char drv_version[64]; | 
 | 	struct usb_card_rec *cardp; | 
 | 	struct sdio_mmc_card *sdio_card; | 
 | 	struct mwifiex_private *priv; | 
 | 	int i, idx; | 
 | 	struct netdev_queue *txq; | 
 | 	struct mwifiex_debug_info *debug_info; | 
 |  | 
 | 	if (adapter->drv_info_dump) { | 
 | 		vfree(adapter->drv_info_dump); | 
 | 		adapter->drv_info_dump = NULL; | 
 | 		adapter->drv_info_size = 0; | 
 | 	} | 
 |  | 
 | 	mwifiex_dbg(adapter, MSG, "===mwifiex driverinfo dump start===\n"); | 
 |  | 
 | 	adapter->drv_info_dump = vzalloc(MWIFIEX_DRV_INFO_SIZE_MAX); | 
 |  | 
 | 	if (!adapter->drv_info_dump) | 
 | 		return; | 
 |  | 
 | 	p = (char *)(adapter->drv_info_dump); | 
 | 	p += sprintf(p, "driver_name = " "\"mwifiex\"\n"); | 
 |  | 
 | 	mwifiex_drv_get_driver_version(adapter, drv_version, | 
 | 				       sizeof(drv_version) - 1); | 
 | 	p += sprintf(p, "driver_version = %s\n", drv_version); | 
 |  | 
 | 	if (adapter->iface_type == MWIFIEX_USB) { | 
 | 		cardp = (struct usb_card_rec *)adapter->card; | 
 | 		p += sprintf(p, "tx_cmd_urb_pending = %d\n", | 
 | 			     atomic_read(&cardp->tx_cmd_urb_pending)); | 
 | 		p += sprintf(p, "tx_data_urb_pending_port_0 = %d\n", | 
 | 			     atomic_read(&cardp->port[0].tx_data_urb_pending)); | 
 | 		p += sprintf(p, "tx_data_urb_pending_port_1 = %d\n", | 
 | 			     atomic_read(&cardp->port[1].tx_data_urb_pending)); | 
 | 		p += sprintf(p, "rx_cmd_urb_pending = %d\n", | 
 | 			     atomic_read(&cardp->rx_cmd_urb_pending)); | 
 | 		p += sprintf(p, "rx_data_urb_pending = %d\n", | 
 | 			     atomic_read(&cardp->rx_data_urb_pending)); | 
 | 	} | 
 |  | 
 | 	p += sprintf(p, "tx_pending = %d\n", | 
 | 		     atomic_read(&adapter->tx_pending)); | 
 | 	p += sprintf(p, "rx_pending = %d\n", | 
 | 		     atomic_read(&adapter->rx_pending)); | 
 |  | 
 | 	if (adapter->iface_type == MWIFIEX_SDIO) { | 
 | 		sdio_card = (struct sdio_mmc_card *)adapter->card; | 
 | 		p += sprintf(p, "\nmp_rd_bitmap=0x%x curr_rd_port=0x%x\n", | 
 | 			     sdio_card->mp_rd_bitmap, sdio_card->curr_rd_port); | 
 | 		p += sprintf(p, "mp_wr_bitmap=0x%x curr_wr_port=0x%x\n", | 
 | 			     sdio_card->mp_wr_bitmap, sdio_card->curr_wr_port); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < adapter->priv_num; i++) { | 
 | 		if (!adapter->priv[i] || !adapter->priv[i]->netdev) | 
 | 			continue; | 
 | 		priv = adapter->priv[i]; | 
 | 		p += sprintf(p, "\n[interface  : \"%s\"]\n", | 
 | 			     priv->netdev->name); | 
 | 		p += sprintf(p, "wmm_tx_pending[0] = %d\n", | 
 | 			     atomic_read(&priv->wmm_tx_pending[0])); | 
 | 		p += sprintf(p, "wmm_tx_pending[1] = %d\n", | 
 | 			     atomic_read(&priv->wmm_tx_pending[1])); | 
 | 		p += sprintf(p, "wmm_tx_pending[2] = %d\n", | 
 | 			     atomic_read(&priv->wmm_tx_pending[2])); | 
 | 		p += sprintf(p, "wmm_tx_pending[3] = %d\n", | 
 | 			     atomic_read(&priv->wmm_tx_pending[3])); | 
 | 		p += sprintf(p, "media_state=\"%s\"\n", !priv->media_connected ? | 
 | 			     "Disconnected" : "Connected"); | 
 | 		p += sprintf(p, "carrier %s\n", (netif_carrier_ok(priv->netdev) | 
 | 			     ? "on" : "off")); | 
 | 		for (idx = 0; idx < priv->netdev->num_tx_queues; idx++) { | 
 | 			txq = netdev_get_tx_queue(priv->netdev, idx); | 
 | 			p += sprintf(p, "tx queue %d:%s  ", idx, | 
 | 				     netif_tx_queue_stopped(txq) ? | 
 | 				     "stopped" : "started"); | 
 | 		} | 
 | 		p += sprintf(p, "\n%s: num_tx_timeout = %d\n", | 
 | 			     priv->netdev->name, priv->num_tx_timeout); | 
 | 	} | 
 |  | 
 | 	if (adapter->iface_type == MWIFIEX_SDIO) { | 
 | 		p += sprintf(p, "\n=== SDIO register dump===\n"); | 
 | 		if (adapter->if_ops.reg_dump) | 
 | 			p += adapter->if_ops.reg_dump(adapter, p); | 
 | 	} | 
 |  | 
 | 	p += sprintf(p, "\n=== more debug information\n"); | 
 | 	debug_info = kzalloc(sizeof(*debug_info), GFP_KERNEL); | 
 | 	if (debug_info) { | 
 | 		for (i = 0; i < adapter->priv_num; i++) { | 
 | 			if (!adapter->priv[i] || !adapter->priv[i]->netdev) | 
 | 				continue; | 
 | 			priv = adapter->priv[i]; | 
 | 			mwifiex_get_debug_info(priv, debug_info); | 
 | 			p += mwifiex_debug_info_to_buffer(priv, p, debug_info); | 
 | 			break; | 
 | 		} | 
 | 		kfree(debug_info); | 
 | 	} | 
 |  | 
 | 	adapter->drv_info_size = p - adapter->drv_info_dump; | 
 | 	mwifiex_dbg(adapter, MSG, "===mwifiex driverinfo dump end===\n"); | 
 | } | 
 | EXPORT_SYMBOL_GPL(mwifiex_drv_info_dump); | 
 |  | 
 | void mwifiex_upload_device_dump(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	u8 idx, *dump_data, *fw_dump_ptr; | 
 | 	u32 dump_len; | 
 |  | 
 | 	dump_len = (strlen("========Start dump driverinfo========\n") + | 
 | 		       adapter->drv_info_size + | 
 | 		       strlen("\n========End dump========\n")); | 
 |  | 
 | 	for (idx = 0; idx < adapter->num_mem_types; idx++) { | 
 | 		struct memory_type_mapping *entry = | 
 | 				&adapter->mem_type_mapping_tbl[idx]; | 
 |  | 
 | 		if (entry->mem_ptr) { | 
 | 			dump_len += (strlen("========Start dump ") + | 
 | 					strlen(entry->mem_name) + | 
 | 					strlen("========\n") + | 
 | 					(entry->mem_size + 1) + | 
 | 					strlen("\n========End dump========\n")); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dump_data = vzalloc(dump_len + 1); | 
 | 	if (!dump_data) | 
 | 		goto done; | 
 |  | 
 | 	fw_dump_ptr = dump_data; | 
 |  | 
 | 	/* Dump all the memory data into single file, a userspace script will | 
 | 	 * be used to split all the memory data to multiple files | 
 | 	 */ | 
 | 	mwifiex_dbg(adapter, MSG, | 
 | 		    "== mwifiex dump information to /sys/class/devcoredump start"); | 
 |  | 
 | 	strcpy(fw_dump_ptr, "========Start dump driverinfo========\n"); | 
 | 	fw_dump_ptr += strlen("========Start dump driverinfo========\n"); | 
 | 	memcpy(fw_dump_ptr, adapter->drv_info_dump, adapter->drv_info_size); | 
 | 	fw_dump_ptr += adapter->drv_info_size; | 
 | 	strcpy(fw_dump_ptr, "\n========End dump========\n"); | 
 | 	fw_dump_ptr += strlen("\n========End dump========\n"); | 
 |  | 
 | 	for (idx = 0; idx < adapter->num_mem_types; idx++) { | 
 | 		struct memory_type_mapping *entry = | 
 | 					&adapter->mem_type_mapping_tbl[idx]; | 
 |  | 
 | 		if (entry->mem_ptr) { | 
 | 			strcpy(fw_dump_ptr, "========Start dump "); | 
 | 			fw_dump_ptr += strlen("========Start dump "); | 
 |  | 
 | 			strcpy(fw_dump_ptr, entry->mem_name); | 
 | 			fw_dump_ptr += strlen(entry->mem_name); | 
 |  | 
 | 			strcpy(fw_dump_ptr, "========\n"); | 
 | 			fw_dump_ptr += strlen("========\n"); | 
 |  | 
 | 			memcpy(fw_dump_ptr, entry->mem_ptr, entry->mem_size); | 
 | 			fw_dump_ptr += entry->mem_size; | 
 |  | 
 | 			strcpy(fw_dump_ptr, "\n========End dump========\n"); | 
 | 			fw_dump_ptr += strlen("\n========End dump========\n"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* device dump data will be free in device coredump release function | 
 | 	 * after 5 min | 
 | 	 */ | 
 | 	dev_coredumpv(adapter->dev, dump_data, dump_len, GFP_KERNEL); | 
 | 	mwifiex_dbg(adapter, MSG, | 
 | 		    "== mwifiex dump information to /sys/class/devcoredump end"); | 
 |  | 
 | done: | 
 | 	for (idx = 0; idx < adapter->num_mem_types; idx++) { | 
 | 		struct memory_type_mapping *entry = | 
 | 			&adapter->mem_type_mapping_tbl[idx]; | 
 |  | 
 | 		if (entry->mem_ptr) { | 
 | 			vfree(entry->mem_ptr); | 
 | 			entry->mem_ptr = NULL; | 
 | 		} | 
 | 		entry->mem_size = 0; | 
 | 	} | 
 |  | 
 | 	if (adapter->drv_info_dump) { | 
 | 		vfree(adapter->drv_info_dump); | 
 | 		adapter->drv_info_dump = NULL; | 
 | 		adapter->drv_info_size = 0; | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL_GPL(mwifiex_upload_device_dump); | 
 |  | 
 | /* | 
 |  * CFG802.11 network device handler for statistics retrieval. | 
 |  */ | 
 | static struct net_device_stats *mwifiex_get_stats(struct net_device *dev) | 
 | { | 
 | 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | 
 |  | 
 | 	return &priv->stats; | 
 | } | 
 |  | 
 | static u16 | 
 | mwifiex_netdev_select_wmm_queue(struct net_device *dev, struct sk_buff *skb, | 
 | 				void *accel_priv, select_queue_fallback_t fallback) | 
 | { | 
 | 	skb->priority = cfg80211_classify8021d(skb, NULL); | 
 | 	return mwifiex_1d_to_wmm_queue[skb->priority]; | 
 | } | 
 |  | 
 | /* Network device handlers */ | 
 | static const struct net_device_ops mwifiex_netdev_ops = { | 
 | 	.ndo_open = mwifiex_open, | 
 | 	.ndo_stop = mwifiex_close, | 
 | 	.ndo_start_xmit = mwifiex_hard_start_xmit, | 
 | 	.ndo_set_mac_address = mwifiex_set_mac_address, | 
 | 	.ndo_validate_addr = eth_validate_addr, | 
 | 	.ndo_tx_timeout = mwifiex_tx_timeout, | 
 | 	.ndo_get_stats = mwifiex_get_stats, | 
 | 	.ndo_set_rx_mode = mwifiex_set_multicast_list, | 
 | 	.ndo_select_queue = mwifiex_netdev_select_wmm_queue, | 
 | }; | 
 |  | 
 | /* | 
 |  * This function initializes the private structure parameters. | 
 |  * | 
 |  * The following wait queues are initialized - | 
 |  *      - IOCTL wait queue | 
 |  *      - Command wait queue | 
 |  *      - Statistics wait queue | 
 |  * | 
 |  * ...and the following default parameters are set - | 
 |  *      - Current key index     : Set to 0 | 
 |  *      - Rate index            : Set to auto | 
 |  *      - Media connected       : Set to disconnected | 
 |  *      - Adhoc link sensed     : Set to false | 
 |  *      - Nick name             : Set to null | 
 |  *      - Number of Tx timeout  : Set to 0 | 
 |  *      - Device address        : Set to current address | 
 |  *      - Rx histogram statistc : Set to 0 | 
 |  * | 
 |  * In addition, the CFG80211 work queue is also created. | 
 |  */ | 
 | void mwifiex_init_priv_params(struct mwifiex_private *priv, | 
 | 			      struct net_device *dev) | 
 | { | 
 | 	dev->netdev_ops = &mwifiex_netdev_ops; | 
 | 	dev->destructor = free_netdev; | 
 | 	/* Initialize private structure */ | 
 | 	priv->current_key_index = 0; | 
 | 	priv->media_connected = false; | 
 | 	memset(priv->mgmt_ie, 0, | 
 | 	       sizeof(struct mwifiex_ie) * MAX_MGMT_IE_INDEX); | 
 | 	priv->beacon_idx = MWIFIEX_AUTO_IDX_MASK; | 
 | 	priv->proberesp_idx = MWIFIEX_AUTO_IDX_MASK; | 
 | 	priv->assocresp_idx = MWIFIEX_AUTO_IDX_MASK; | 
 | 	priv->gen_idx = MWIFIEX_AUTO_IDX_MASK; | 
 | 	priv->num_tx_timeout = 0; | 
 | 	ether_addr_copy(priv->curr_addr, priv->adapter->perm_addr); | 
 | 	memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN); | 
 |  | 
 | 	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA || | 
 | 	    GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) { | 
 | 		priv->hist_data = kmalloc(sizeof(*priv->hist_data), GFP_KERNEL); | 
 | 		if (priv->hist_data) | 
 | 			mwifiex_hist_data_reset(priv); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * This function check if command is pending. | 
 |  */ | 
 | int is_command_pending(struct mwifiex_adapter *adapter) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int is_cmd_pend_q_empty; | 
 |  | 
 | 	spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags); | 
 | 	is_cmd_pend_q_empty = list_empty(&adapter->cmd_pending_q); | 
 | 	spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags); | 
 |  | 
 | 	return !is_cmd_pend_q_empty; | 
 | } | 
 |  | 
 | /* | 
 |  * This is the RX work queue function. | 
 |  * | 
 |  * It handles the RX operations. | 
 |  */ | 
 | static void mwifiex_rx_work_queue(struct work_struct *work) | 
 | { | 
 | 	struct mwifiex_adapter *adapter = | 
 | 		container_of(work, struct mwifiex_adapter, rx_work); | 
 |  | 
 | 	if (adapter->surprise_removed) | 
 | 		return; | 
 | 	mwifiex_process_rx(adapter); | 
 | } | 
 |  | 
 | /* | 
 |  * This is the main work queue function. | 
 |  * | 
 |  * It handles the main process, which in turn handles the complete | 
 |  * driver operations. | 
 |  */ | 
 | static void mwifiex_main_work_queue(struct work_struct *work) | 
 | { | 
 | 	struct mwifiex_adapter *adapter = | 
 | 		container_of(work, struct mwifiex_adapter, main_work); | 
 |  | 
 | 	if (adapter->surprise_removed) | 
 | 		return; | 
 | 	mwifiex_main_process(adapter); | 
 | } | 
 |  | 
 | /* | 
 |  * This function adds the card. | 
 |  * | 
 |  * This function follows the following major steps to set up the device - | 
 |  *      - Initialize software. This includes probing the card, registering | 
 |  *        the interface operations table, and allocating/initializing the | 
 |  *        adapter structure | 
 |  *      - Set up the netlink socket | 
 |  *      - Create and start the main work queue | 
 |  *      - Register the device | 
 |  *      - Initialize firmware and hardware | 
 |  *      - Add logical interfaces | 
 |  */ | 
 | int | 
 | mwifiex_add_card(void *card, struct semaphore *sem, | 
 | 		 struct mwifiex_if_ops *if_ops, u8 iface_type) | 
 | { | 
 | 	struct mwifiex_adapter *adapter; | 
 |  | 
 | 	if (down_interruptible(sem)) | 
 | 		goto exit_sem_err; | 
 |  | 
 | 	if (mwifiex_register(card, if_ops, (void **)&adapter)) { | 
 | 		pr_err("%s: software init failed\n", __func__); | 
 | 		goto err_init_sw; | 
 | 	} | 
 |  | 
 | 	adapter->iface_type = iface_type; | 
 | 	adapter->card_sem = sem; | 
 |  | 
 | 	adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; | 
 | 	adapter->surprise_removed = false; | 
 | 	init_waitqueue_head(&adapter->init_wait_q); | 
 | 	adapter->is_suspended = false; | 
 | 	adapter->hs_activated = false; | 
 | 	init_waitqueue_head(&adapter->hs_activate_wait_q); | 
 | 	init_waitqueue_head(&adapter->cmd_wait_q.wait); | 
 | 	adapter->cmd_wait_q.status = 0; | 
 | 	adapter->scan_wait_q_woken = false; | 
 |  | 
 | 	if ((num_possible_cpus() > 1) || adapter->iface_type == MWIFIEX_USB) { | 
 | 		adapter->rx_work_enabled = true; | 
 | 		pr_notice("rx work enabled, cpus %d\n", num_possible_cpus()); | 
 | 	} | 
 |  | 
 | 	adapter->workqueue = | 
 | 		alloc_workqueue("MWIFIEX_WORK_QUEUE", | 
 | 				WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND, 1); | 
 | 	if (!adapter->workqueue) | 
 | 		goto err_kmalloc; | 
 |  | 
 | 	INIT_WORK(&adapter->main_work, mwifiex_main_work_queue); | 
 |  | 
 | 	if (adapter->rx_work_enabled) { | 
 | 		adapter->rx_workqueue = alloc_workqueue("MWIFIEX_RX_WORK_QUEUE", | 
 | 							WQ_HIGHPRI | | 
 | 							WQ_MEM_RECLAIM | | 
 | 							WQ_UNBOUND, 1); | 
 | 		if (!adapter->rx_workqueue) | 
 | 			goto err_kmalloc; | 
 |  | 
 | 		INIT_WORK(&adapter->rx_work, mwifiex_rx_work_queue); | 
 | 	} | 
 |  | 
 | 	/* Register the device. Fill up the private data structure with relevant | 
 | 	   information from the card. */ | 
 | 	if (adapter->if_ops.register_dev(adapter)) { | 
 | 		pr_err("%s: failed to register mwifiex device\n", __func__); | 
 | 		goto err_registerdev; | 
 | 	} | 
 |  | 
 | 	if (mwifiex_init_hw_fw(adapter)) { | 
 | 		pr_err("%s: firmware init failed\n", __func__); | 
 | 		goto err_init_fw; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_init_fw: | 
 | 	pr_debug("info: %s: unregister device\n", __func__); | 
 | 	if (adapter->if_ops.unregister_dev) | 
 | 		adapter->if_ops.unregister_dev(adapter); | 
 | 	if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) { | 
 | 		pr_debug("info: %s: shutdown mwifiex\n", __func__); | 
 | 		adapter->init_wait_q_woken = false; | 
 |  | 
 | 		if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS) | 
 | 			wait_event_interruptible(adapter->init_wait_q, | 
 | 						 adapter->init_wait_q_woken); | 
 | 	} | 
 | err_registerdev: | 
 | 	adapter->surprise_removed = true; | 
 | 	mwifiex_terminate_workqueue(adapter); | 
 | err_kmalloc: | 
 | 	mwifiex_free_adapter(adapter); | 
 |  | 
 | err_init_sw: | 
 | 	up(sem); | 
 |  | 
 | exit_sem_err: | 
 | 	return -1; | 
 | } | 
 | EXPORT_SYMBOL_GPL(mwifiex_add_card); | 
 |  | 
 | /* | 
 |  * This function removes the card. | 
 |  * | 
 |  * This function follows the following major steps to remove the device - | 
 |  *      - Stop data traffic | 
 |  *      - Shutdown firmware | 
 |  *      - Remove the logical interfaces | 
 |  *      - Terminate the work queue | 
 |  *      - Unregister the device | 
 |  *      - Free the adapter structure | 
 |  */ | 
 | int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem) | 
 | { | 
 | 	struct mwifiex_private *priv = NULL; | 
 | 	int i; | 
 |  | 
 | 	if (down_interruptible(sem)) | 
 | 		goto exit_sem_err; | 
 |  | 
 | 	if (!adapter) | 
 | 		goto exit_remove; | 
 |  | 
 | 	/* We can no longer handle interrupts once we start doing the teardown | 
 | 	 * below. */ | 
 | 	if (adapter->if_ops.disable_int) | 
 | 		adapter->if_ops.disable_int(adapter); | 
 |  | 
 | 	adapter->surprise_removed = true; | 
 |  | 
 | 	mwifiex_terminate_workqueue(adapter); | 
 |  | 
 | 	/* Stop data */ | 
 | 	for (i = 0; i < adapter->priv_num; i++) { | 
 | 		priv = adapter->priv[i]; | 
 | 		if (priv && priv->netdev) { | 
 | 			mwifiex_stop_net_dev_queue(priv->netdev, adapter); | 
 | 			if (netif_carrier_ok(priv->netdev)) | 
 | 				netif_carrier_off(priv->netdev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	mwifiex_dbg(adapter, CMD, | 
 | 		    "cmd: calling mwifiex_shutdown_drv...\n"); | 
 | 	adapter->init_wait_q_woken = false; | 
 |  | 
 | 	if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS) | 
 | 		wait_event_interruptible(adapter->init_wait_q, | 
 | 					 adapter->init_wait_q_woken); | 
 | 	mwifiex_dbg(adapter, CMD, | 
 | 		    "cmd: mwifiex_shutdown_drv done\n"); | 
 | 	if (atomic_read(&adapter->rx_pending) || | 
 | 	    atomic_read(&adapter->tx_pending) || | 
 | 	    atomic_read(&adapter->cmd_pending)) { | 
 | 		mwifiex_dbg(adapter, ERROR, | 
 | 			    "rx_pending=%d, tx_pending=%d,\t" | 
 | 			    "cmd_pending=%d\n", | 
 | 			    atomic_read(&adapter->rx_pending), | 
 | 			    atomic_read(&adapter->tx_pending), | 
 | 			    atomic_read(&adapter->cmd_pending)); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < adapter->priv_num; i++) { | 
 | 		priv = adapter->priv[i]; | 
 |  | 
 | 		if (!priv) | 
 | 			continue; | 
 |  | 
 | 		rtnl_lock(); | 
 | 		if (priv->netdev && | 
 | 		    priv->wdev.iftype != NL80211_IFTYPE_UNSPECIFIED) | 
 | 			mwifiex_del_virtual_intf(adapter->wiphy, &priv->wdev); | 
 | 		rtnl_unlock(); | 
 | 	} | 
 |  | 
 | 	wiphy_unregister(adapter->wiphy); | 
 | 	wiphy_free(adapter->wiphy); | 
 |  | 
 | 	/* Unregister device */ | 
 | 	mwifiex_dbg(adapter, INFO, | 
 | 		    "info: unregister device\n"); | 
 | 	if (adapter->if_ops.unregister_dev) | 
 | 		adapter->if_ops.unregister_dev(adapter); | 
 | 	/* Free adapter structure */ | 
 | 	mwifiex_dbg(adapter, INFO, | 
 | 		    "info: free adapter\n"); | 
 | 	mwifiex_free_adapter(adapter); | 
 |  | 
 | exit_remove: | 
 | 	up(sem); | 
 | exit_sem_err: | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(mwifiex_remove_card); | 
 |  | 
 | void _mwifiex_dbg(const struct mwifiex_adapter *adapter, int mask, | 
 | 		  const char *fmt, ...) | 
 | { | 
 | 	struct va_format vaf; | 
 | 	va_list args; | 
 |  | 
 | 	if (!adapter->dev || !(adapter->debug_mask & mask)) | 
 | 		return; | 
 |  | 
 | 	va_start(args, fmt); | 
 |  | 
 | 	vaf.fmt = fmt; | 
 | 	vaf.va = &args; | 
 |  | 
 | 	dev_info(adapter->dev, "%pV", &vaf); | 
 |  | 
 | 	va_end(args); | 
 | } | 
 | EXPORT_SYMBOL_GPL(_mwifiex_dbg); | 
 |  | 
 | /* | 
 |  * This function initializes the module. | 
 |  * | 
 |  * The debug FS is also initialized if configured. | 
 |  */ | 
 | static int | 
 | mwifiex_init_module(void) | 
 | { | 
 | #ifdef CONFIG_DEBUG_FS | 
 | 	mwifiex_debugfs_init(); | 
 | #endif | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * This function cleans up the module. | 
 |  * | 
 |  * The debug FS is removed if available. | 
 |  */ | 
 | static void | 
 | mwifiex_cleanup_module(void) | 
 | { | 
 | #ifdef CONFIG_DEBUG_FS | 
 | 	mwifiex_debugfs_remove(); | 
 | #endif | 
 | } | 
 |  | 
 | module_init(mwifiex_init_module); | 
 | module_exit(mwifiex_cleanup_module); | 
 |  | 
 | MODULE_AUTHOR("Marvell International Ltd."); | 
 | MODULE_DESCRIPTION("Marvell WiFi-Ex Driver version " VERSION); | 
 | MODULE_VERSION(VERSION); | 
 | MODULE_LICENSE("GPL v2"); |