| /* |
| * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| * |
| * Create static mapping between physical to virtual memory. |
| */ |
| |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <linux/clk.h> |
| |
| #include <asm/mach/map.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/common.h> |
| #include <mach/devices-common.h> |
| #include <mach/iomux-v3.h> |
| |
| static struct clk *gpc_dvfs_clk; |
| |
| static void imx5_idle(void) |
| { |
| /* gpc clock is needed for SRPG */ |
| if (gpc_dvfs_clk == NULL) { |
| gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); |
| if (IS_ERR(gpc_dvfs_clk)) |
| return; |
| } |
| clk_enable(gpc_dvfs_clk); |
| mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); |
| if (tzic_enable_wake() != 0) |
| cpu_do_idle(); |
| clk_disable(gpc_dvfs_clk); |
| } |
| |
| /* |
| * Define the MX50 memory map. |
| */ |
| static struct map_desc mx50_io_desc[] __initdata = { |
| imx_map_entry(MX50, TZIC, MT_DEVICE), |
| imx_map_entry(MX50, SPBA0, MT_DEVICE), |
| imx_map_entry(MX50, AIPS1, MT_DEVICE), |
| imx_map_entry(MX50, AIPS2, MT_DEVICE), |
| }; |
| |
| /* |
| * Define the MX51 memory map. |
| */ |
| static struct map_desc mx51_io_desc[] __initdata = { |
| imx_map_entry(MX51, TZIC, MT_DEVICE), |
| imx_map_entry(MX51, IRAM, MT_DEVICE), |
| imx_map_entry(MX51, AIPS1, MT_DEVICE), |
| imx_map_entry(MX51, SPBA0, MT_DEVICE), |
| imx_map_entry(MX51, AIPS2, MT_DEVICE), |
| }; |
| |
| /* |
| * Define the MX53 memory map. |
| */ |
| static struct map_desc mx53_io_desc[] __initdata = { |
| imx_map_entry(MX53, TZIC, MT_DEVICE), |
| imx_map_entry(MX53, AIPS1, MT_DEVICE), |
| imx_map_entry(MX53, SPBA0, MT_DEVICE), |
| imx_map_entry(MX53, AIPS2, MT_DEVICE), |
| }; |
| |
| /* |
| * This function initializes the memory map. It is called during the |
| * system startup to create static physical to virtual memory mappings |
| * for the IO modules. |
| */ |
| void __init mx50_map_io(void) |
| { |
| iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc)); |
| } |
| |
| void __init mx51_map_io(void) |
| { |
| iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc)); |
| } |
| |
| void __init mx53_map_io(void) |
| { |
| iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc)); |
| } |
| |
| void __init imx50_init_early(void) |
| { |
| mxc_set_cpu_type(MXC_CPU_MX50); |
| mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR)); |
| mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); |
| } |
| |
| void __init imx51_init_early(void) |
| { |
| mxc_set_cpu_type(MXC_CPU_MX51); |
| mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); |
| mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); |
| arm_pm_idle = imx5_idle; |
| } |
| |
| void __init imx53_init_early(void) |
| { |
| mxc_set_cpu_type(MXC_CPU_MX53); |
| mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); |
| mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); |
| } |
| |
| void __init mx50_init_irq(void) |
| { |
| tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR)); |
| } |
| |
| void __init mx51_init_irq(void) |
| { |
| tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR)); |
| } |
| |
| void __init mx53_init_irq(void) |
| { |
| tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR)); |
| } |
| |
| static struct sdma_script_start_addrs imx51_sdma_script __initdata = { |
| .ap_2_ap_addr = 642, |
| .uart_2_mcu_addr = 817, |
| .mcu_2_app_addr = 747, |
| .mcu_2_shp_addr = 961, |
| .ata_2_mcu_addr = 1473, |
| .mcu_2_ata_addr = 1392, |
| .app_2_per_addr = 1033, |
| .app_2_mcu_addr = 683, |
| .shp_2_per_addr = 1251, |
| .shp_2_mcu_addr = 892, |
| }; |
| |
| static struct sdma_platform_data imx51_sdma_pdata __initdata = { |
| .fw_name = "sdma-imx51.bin", |
| .script_addrs = &imx51_sdma_script, |
| }; |
| |
| static struct sdma_script_start_addrs imx53_sdma_script __initdata = { |
| .ap_2_ap_addr = 642, |
| .app_2_mcu_addr = 683, |
| .mcu_2_app_addr = 747, |
| .uart_2_mcu_addr = 817, |
| .shp_2_mcu_addr = 891, |
| .mcu_2_shp_addr = 960, |
| .uartsh_2_mcu_addr = 1032, |
| .spdif_2_mcu_addr = 1100, |
| .mcu_2_spdif_addr = 1134, |
| .firi_2_mcu_addr = 1193, |
| .mcu_2_firi_addr = 1290, |
| }; |
| |
| static struct sdma_platform_data imx53_sdma_pdata __initdata = { |
| .fw_name = "sdma-imx53.bin", |
| .script_addrs = &imx53_sdma_script, |
| }; |
| |
| static const struct resource imx50_audmux_res[] __initconst = { |
| DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K), |
| }; |
| |
| static const struct resource imx51_audmux_res[] __initconst = { |
| DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K), |
| }; |
| |
| static const struct resource imx53_audmux_res[] __initconst = { |
| DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K), |
| }; |
| |
| void __init imx50_soc_init(void) |
| { |
| /* i.mx50 has the i.mx31 type gpio */ |
| mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); |
| mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); |
| mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); |
| mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); |
| mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); |
| mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); |
| |
| /* i.mx50 has the i.mx31 type audmux */ |
| platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res, |
| ARRAY_SIZE(imx50_audmux_res)); |
| } |
| |
| void __init imx51_soc_init(void) |
| { |
| /* i.mx51 has the i.mx31 type gpio */ |
| mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH); |
| mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH); |
| mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); |
| mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); |
| |
| /* i.mx51 has the i.mx35 type sdma */ |
| imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); |
| /* i.mx51 has the i.mx31 type audmux */ |
| platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res, |
| ARRAY_SIZE(imx51_audmux_res)); |
| } |
| |
| void __init imx53_soc_init(void) |
| { |
| /* i.mx53 has the i.mx31 type gpio */ |
| mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); |
| mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); |
| mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); |
| mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); |
| mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); |
| mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); |
| mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); |
| |
| /* i.mx53 has the i.mx35 type sdma */ |
| imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); |
| /* i.mx53 has the i.mx31 type audmux */ |
| platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res, |
| ARRAY_SIZE(imx53_audmux_res)); |
| } |