| /* |
| * Copyright 2017 Benjamin Herrenschmidt, IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, version 2, as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define pr_fmt(fmt) "xive-kvm: " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/kvm_host.h> |
| #include <linux/err.h> |
| #include <linux/gfp.h> |
| #include <linux/spinlock.h> |
| #include <linux/delay.h> |
| #include <linux/percpu.h> |
| #include <linux/cpumask.h> |
| #include <asm/uaccess.h> |
| #include <asm/kvm_book3s.h> |
| #include <asm/kvm_ppc.h> |
| #include <asm/hvcall.h> |
| #include <asm/xics.h> |
| #include <asm/xive.h> |
| #include <asm/xive-regs.h> |
| #include <asm/debug.h> |
| #include <asm/debugfs.h> |
| #include <asm/time.h> |
| #include <asm/opal.h> |
| |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| |
| #include "book3s_xive.h" |
| |
| |
| /* |
| * Virtual mode variants of the hcalls for use on radix/radix |
| * with AIL. They require the VCPU's VP to be "pushed" |
| * |
| * We still instanciate them here because we use some of the |
| * generated utility functions as well in this file. |
| */ |
| #define XIVE_RUNTIME_CHECKS |
| #define X_PFX xive_vm_ |
| #define X_STATIC static |
| #define X_STAT_PFX stat_vm_ |
| #define __x_tima xive_tima |
| #define __x_eoi_page(xd) ((void __iomem *)((xd)->eoi_mmio)) |
| #define __x_trig_page(xd) ((void __iomem *)((xd)->trig_mmio)) |
| #define __x_readb __raw_readb |
| #define __x_writeb __raw_writeb |
| #define __x_readw __raw_readw |
| #define __x_readq __raw_readq |
| #define __x_writeq __raw_writeq |
| |
| #include "book3s_xive_template.c" |
| |
| /* |
| * We leave a gap of a couple of interrupts in the queue to |
| * account for the IPI and additional safety guard. |
| */ |
| #define XIVE_Q_GAP 2 |
| |
| /* |
| * This is a simple trigger for a generic XIVE IRQ. This must |
| * only be called for interrupts that support a trigger page |
| */ |
| static bool xive_irq_trigger(struct xive_irq_data *xd) |
| { |
| /* This should be only for MSIs */ |
| if (WARN_ON(xd->flags & XIVE_IRQ_FLAG_LSI)) |
| return false; |
| |
| /* Those interrupts should always have a trigger page */ |
| if (WARN_ON(!xd->trig_mmio)) |
| return false; |
| |
| out_be64(xd->trig_mmio, 0); |
| |
| return true; |
| } |
| |
| static irqreturn_t xive_esc_irq(int irq, void *data) |
| { |
| struct kvm_vcpu *vcpu = data; |
| |
| /* We use the existing H_PROD mechanism to wake up the target */ |
| vcpu->arch.prodded = 1; |
| smp_mb(); |
| if (vcpu->arch.ceded) |
| kvmppc_fast_vcpu_kick(vcpu); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int xive_attach_escalation(struct kvm_vcpu *vcpu, u8 prio) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| struct xive_q *q = &xc->queues[prio]; |
| char *name = NULL; |
| int rc; |
| |
| /* Already there ? */ |
| if (xc->esc_virq[prio]) |
| return 0; |
| |
| /* Hook up the escalation interrupt */ |
| xc->esc_virq[prio] = irq_create_mapping(NULL, q->esc_irq); |
| if (!xc->esc_virq[prio]) { |
| pr_err("Failed to map escalation interrupt for queue %d of VCPU %d\n", |
| prio, xc->server_num); |
| return -EIO; |
| } |
| |
| /* |
| * Future improvement: start with them disabled |
| * and handle DD2 and later scheme of merged escalation |
| * interrupts |
| */ |
| name = kasprintf(GFP_KERNEL, "kvm-%d-%d-%d", |
| vcpu->kvm->arch.lpid, xc->server_num, prio); |
| if (!name) { |
| pr_err("Failed to allocate escalation irq name for queue %d of VCPU %d\n", |
| prio, xc->server_num); |
| rc = -ENOMEM; |
| goto error; |
| } |
| rc = request_irq(xc->esc_virq[prio], xive_esc_irq, |
| IRQF_NO_THREAD, name, vcpu); |
| if (rc) { |
| pr_err("Failed to request escalation interrupt for queue %d of VCPU %d\n", |
| prio, xc->server_num); |
| goto error; |
| } |
| xc->esc_virq_names[prio] = name; |
| return 0; |
| error: |
| irq_dispose_mapping(xc->esc_virq[prio]); |
| xc->esc_virq[prio] = 0; |
| kfree(name); |
| return rc; |
| } |
| |
| static int xive_provision_queue(struct kvm_vcpu *vcpu, u8 prio) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| struct kvmppc_xive *xive = xc->xive; |
| struct xive_q *q = &xc->queues[prio]; |
| void *qpage; |
| int rc; |
| |
| if (WARN_ON(q->qpage)) |
| return 0; |
| |
| /* Allocate the queue and retrieve infos on current node for now */ |
| qpage = (__be32 *)__get_free_pages(GFP_KERNEL, xive->q_page_order); |
| if (!qpage) { |
| pr_err("Failed to allocate queue %d for VCPU %d\n", |
| prio, xc->server_num); |
| return -ENOMEM;; |
| } |
| memset(qpage, 0, 1 << xive->q_order); |
| |
| /* |
| * Reconfigure the queue. This will set q->qpage only once the |
| * queue is fully configured. This is a requirement for prio 0 |
| * as we will stop doing EOIs for every IPI as soon as we observe |
| * qpage being non-NULL, and instead will only EOI when we receive |
| * corresponding queue 0 entries |
| */ |
| rc = xive_native_configure_queue(xc->vp_id, q, prio, qpage, |
| xive->q_order, true); |
| if (rc) |
| pr_err("Failed to configure queue %d for VCPU %d\n", |
| prio, xc->server_num); |
| return rc; |
| } |
| |
| /* Called with kvm_lock held */ |
| static int xive_check_provisioning(struct kvm *kvm, u8 prio) |
| { |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| struct kvm_vcpu *vcpu; |
| int i, rc; |
| |
| lockdep_assert_held(&kvm->lock); |
| |
| /* Already provisioned ? */ |
| if (xive->qmap & (1 << prio)) |
| return 0; |
| |
| pr_devel("Provisioning prio... %d\n", prio); |
| |
| /* Provision each VCPU and enable escalations */ |
| kvm_for_each_vcpu(i, vcpu, kvm) { |
| if (!vcpu->arch.xive_vcpu) |
| continue; |
| rc = xive_provision_queue(vcpu, prio); |
| if (rc == 0) |
| xive_attach_escalation(vcpu, prio); |
| if (rc) |
| return rc; |
| } |
| |
| /* Order previous stores and mark it as provisioned */ |
| mb(); |
| xive->qmap |= (1 << prio); |
| return 0; |
| } |
| |
| static void xive_inc_q_pending(struct kvm *kvm, u32 server, u8 prio) |
| { |
| struct kvm_vcpu *vcpu; |
| struct kvmppc_xive_vcpu *xc; |
| struct xive_q *q; |
| |
| /* Locate target server */ |
| vcpu = kvmppc_xive_find_server(kvm, server); |
| if (!vcpu) { |
| pr_warn("%s: Can't find server %d\n", __func__, server); |
| return; |
| } |
| xc = vcpu->arch.xive_vcpu; |
| if (WARN_ON(!xc)) |
| return; |
| |
| q = &xc->queues[prio]; |
| atomic_inc(&q->pending_count); |
| } |
| |
| static int xive_try_pick_queue(struct kvm_vcpu *vcpu, u8 prio) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| struct xive_q *q; |
| u32 max; |
| |
| if (WARN_ON(!xc)) |
| return -ENXIO; |
| if (!xc->valid) |
| return -ENXIO; |
| |
| q = &xc->queues[prio]; |
| if (WARN_ON(!q->qpage)) |
| return -ENXIO; |
| |
| /* Calculate max number of interrupts in that queue. */ |
| max = (q->msk + 1) - XIVE_Q_GAP; |
| return atomic_add_unless(&q->count, 1, max) ? 0 : -EBUSY; |
| } |
| |
| static int xive_select_target(struct kvm *kvm, u32 *server, u8 prio) |
| { |
| struct kvm_vcpu *vcpu; |
| int i, rc; |
| |
| /* Locate target server */ |
| vcpu = kvmppc_xive_find_server(kvm, *server); |
| if (!vcpu) { |
| pr_devel("Can't find server %d\n", *server); |
| return -EINVAL; |
| } |
| |
| pr_devel("Finding irq target on 0x%x/%d...\n", *server, prio); |
| |
| /* Try pick it */ |
| rc = xive_try_pick_queue(vcpu, prio); |
| if (rc == 0) |
| return rc; |
| |
| pr_devel(" .. failed, looking up candidate...\n"); |
| |
| /* Failed, pick another VCPU */ |
| kvm_for_each_vcpu(i, vcpu, kvm) { |
| if (!vcpu->arch.xive_vcpu) |
| continue; |
| rc = xive_try_pick_queue(vcpu, prio); |
| if (rc == 0) { |
| *server = vcpu->arch.xive_vcpu->server_num; |
| pr_devel(" found on 0x%x/%d\n", *server, prio); |
| return rc; |
| } |
| } |
| pr_devel(" no available target !\n"); |
| |
| /* No available target ! */ |
| return -EBUSY; |
| } |
| |
| static u8 xive_lock_and_mask(struct kvmppc_xive *xive, |
| struct kvmppc_xive_src_block *sb, |
| struct kvmppc_xive_irq_state *state) |
| { |
| struct xive_irq_data *xd; |
| u32 hw_num; |
| u8 old_prio; |
| u64 val; |
| |
| /* |
| * Take the lock, set masked, try again if racing |
| * with H_EOI |
| */ |
| for (;;) { |
| arch_spin_lock(&sb->lock); |
| old_prio = state->guest_priority; |
| state->guest_priority = MASKED; |
| mb(); |
| if (!state->in_eoi) |
| break; |
| state->guest_priority = old_prio; |
| arch_spin_unlock(&sb->lock); |
| } |
| |
| /* No change ? Bail */ |
| if (old_prio == MASKED) |
| return old_prio; |
| |
| /* Get the right irq */ |
| kvmppc_xive_select_irq(state, &hw_num, &xd); |
| |
| /* |
| * If the interrupt is marked as needing masking via |
| * firmware, we do it here. Firmware masking however |
| * is "lossy", it won't return the old p and q bits |
| * and won't set the interrupt to a state where it will |
| * record queued ones. If this is an issue we should do |
| * lazy masking instead. |
| * |
| * For now, we work around this in unmask by forcing |
| * an interrupt whenever we unmask a non-LSI via FW |
| * (if ever). |
| */ |
| if (xd->flags & OPAL_XIVE_IRQ_MASK_VIA_FW) { |
| xive_native_configure_irq(hw_num, |
| xive->vp_base + state->act_server, |
| MASKED, state->number); |
| /* set old_p so we can track if an H_EOI was done */ |
| state->old_p = true; |
| state->old_q = false; |
| } else { |
| /* Set PQ to 10, return old P and old Q and remember them */ |
| val = xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_10); |
| state->old_p = !!(val & 2); |
| state->old_q = !!(val & 1); |
| |
| /* |
| * Synchronize hardware to sensure the queues are updated |
| * when masking |
| */ |
| xive_native_sync_source(hw_num); |
| } |
| |
| return old_prio; |
| } |
| |
| static void xive_lock_for_unmask(struct kvmppc_xive_src_block *sb, |
| struct kvmppc_xive_irq_state *state) |
| { |
| /* |
| * Take the lock try again if racing with H_EOI |
| */ |
| for (;;) { |
| arch_spin_lock(&sb->lock); |
| if (!state->in_eoi) |
| break; |
| arch_spin_unlock(&sb->lock); |
| } |
| } |
| |
| static void xive_finish_unmask(struct kvmppc_xive *xive, |
| struct kvmppc_xive_src_block *sb, |
| struct kvmppc_xive_irq_state *state, |
| u8 prio) |
| { |
| struct xive_irq_data *xd; |
| u32 hw_num; |
| |
| /* If we aren't changing a thing, move on */ |
| if (state->guest_priority != MASKED) |
| goto bail; |
| |
| /* Get the right irq */ |
| kvmppc_xive_select_irq(state, &hw_num, &xd); |
| |
| /* |
| * See command in xive_lock_and_mask() concerning masking |
| * via firmware. |
| */ |
| if (xd->flags & OPAL_XIVE_IRQ_MASK_VIA_FW) { |
| xive_native_configure_irq(hw_num, |
| xive->vp_base + state->act_server, |
| state->act_priority, state->number); |
| /* If an EOI is needed, do it here */ |
| if (!state->old_p) |
| xive_vm_source_eoi(hw_num, xd); |
| /* If this is not an LSI, force a trigger */ |
| if (!(xd->flags & OPAL_XIVE_IRQ_LSI)) |
| xive_irq_trigger(xd); |
| goto bail; |
| } |
| |
| /* Old Q set, set PQ to 11 */ |
| if (state->old_q) |
| xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_11); |
| |
| /* |
| * If not old P, then perform an "effective" EOI, |
| * on the source. This will handle the cases where |
| * FW EOI is needed. |
| */ |
| if (!state->old_p) |
| xive_vm_source_eoi(hw_num, xd); |
| |
| /* Synchronize ordering and mark unmasked */ |
| mb(); |
| bail: |
| state->guest_priority = prio; |
| } |
| |
| /* |
| * Target an interrupt to a given server/prio, this will fallback |
| * to another server if necessary and perform the HW targetting |
| * updates as needed |
| * |
| * NOTE: Must be called with the state lock held |
| */ |
| static int xive_target_interrupt(struct kvm *kvm, |
| struct kvmppc_xive_irq_state *state, |
| u32 server, u8 prio) |
| { |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| u32 hw_num; |
| int rc; |
| |
| /* |
| * This will return a tentative server and actual |
| * priority. The count for that new target will have |
| * already been incremented. |
| */ |
| rc = xive_select_target(kvm, &server, prio); |
| |
| /* |
| * We failed to find a target ? Not much we can do |
| * at least until we support the GIQ. |
| */ |
| if (rc) |
| return rc; |
| |
| /* |
| * Increment the old queue pending count if there |
| * was one so that the old queue count gets adjusted later |
| * when observed to be empty. |
| */ |
| if (state->act_priority != MASKED) |
| xive_inc_q_pending(kvm, |
| state->act_server, |
| state->act_priority); |
| /* |
| * Update state and HW |
| */ |
| state->act_priority = prio; |
| state->act_server = server; |
| |
| /* Get the right irq */ |
| kvmppc_xive_select_irq(state, &hw_num, NULL); |
| |
| return xive_native_configure_irq(hw_num, |
| xive->vp_base + server, |
| prio, state->number); |
| } |
| |
| /* |
| * Targetting rules: In order to avoid losing track of |
| * pending interrupts accross mask and unmask, which would |
| * allow queue overflows, we implement the following rules: |
| * |
| * - Unless it was never enabled (or we run out of capacity) |
| * an interrupt is always targetted at a valid server/queue |
| * pair even when "masked" by the guest. This pair tends to |
| * be the last one used but it can be changed under some |
| * circumstances. That allows us to separate targetting |
| * from masking, we only handle accounting during (re)targetting, |
| * this also allows us to let an interrupt drain into its target |
| * queue after masking, avoiding complex schemes to remove |
| * interrupts out of remote processor queues. |
| * |
| * - When masking, we set PQ to 10 and save the previous value |
| * of P and Q. |
| * |
| * - When unmasking, if saved Q was set, we set PQ to 11 |
| * otherwise we leave PQ to the HW state which will be either |
| * 10 if nothing happened or 11 if the interrupt fired while |
| * masked. Effectively we are OR'ing the previous Q into the |
| * HW Q. |
| * |
| * Then if saved P is clear, we do an effective EOI (Q->P->Trigger) |
| * which will unmask the interrupt and shoot a new one if Q was |
| * set. |
| * |
| * Otherwise (saved P is set) we leave PQ unchanged (so 10 or 11, |
| * effectively meaning an H_EOI from the guest is still expected |
| * for that interrupt). |
| * |
| * - If H_EOI occurs while masked, we clear the saved P. |
| * |
| * - When changing target, we account on the new target and |
| * increment a separate "pending" counter on the old one. |
| * This pending counter will be used to decrement the old |
| * target's count when its queue has been observed empty. |
| */ |
| |
| int kvmppc_xive_set_xive(struct kvm *kvm, u32 irq, u32 server, |
| u32 priority) |
| { |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| u8 new_act_prio; |
| int rc = 0; |
| u16 idx; |
| |
| if (!xive) |
| return -ENODEV; |
| |
| pr_devel("set_xive ! irq 0x%x server 0x%x prio %d\n", |
| irq, server, priority); |
| |
| /* First, check provisioning of queues */ |
| if (priority != MASKED) |
| rc = xive_check_provisioning(xive->kvm, |
| xive_prio_from_guest(priority)); |
| if (rc) { |
| pr_devel(" provisioning failure %d !\n", rc); |
| return rc; |
| } |
| |
| sb = kvmppc_xive_find_source(xive, irq, &idx); |
| if (!sb) |
| return -EINVAL; |
| state = &sb->irq_state[idx]; |
| |
| /* |
| * We first handle masking/unmasking since the locking |
| * might need to be retried due to EOIs, we'll handle |
| * targetting changes later. These functions will return |
| * with the SB lock held. |
| * |
| * xive_lock_and_mask() will also set state->guest_priority |
| * but won't otherwise change other fields of the state. |
| * |
| * xive_lock_for_unmask will not actually unmask, this will |
| * be done later by xive_finish_unmask() once the targetting |
| * has been done, so we don't try to unmask an interrupt |
| * that hasn't yet been targetted. |
| */ |
| if (priority == MASKED) |
| xive_lock_and_mask(xive, sb, state); |
| else |
| xive_lock_for_unmask(sb, state); |
| |
| |
| /* |
| * Then we handle targetting. |
| * |
| * First calculate a new "actual priority" |
| */ |
| new_act_prio = state->act_priority; |
| if (priority != MASKED) |
| new_act_prio = xive_prio_from_guest(priority); |
| |
| pr_devel(" new_act_prio=%x act_server=%x act_prio=%x\n", |
| new_act_prio, state->act_server, state->act_priority); |
| |
| /* |
| * Then check if we actually need to change anything, |
| * |
| * The condition for re-targetting the interrupt is that |
| * we have a valid new priority (new_act_prio is not 0xff) |
| * and either the server or the priority changed. |
| * |
| * Note: If act_priority was ff and the new priority is |
| * also ff, we don't do anything and leave the interrupt |
| * untargetted. An attempt of doing an int_on on an |
| * untargetted interrupt will fail. If that is a problem |
| * we could initialize interrupts with valid default |
| */ |
| |
| if (new_act_prio != MASKED && |
| (state->act_server != server || |
| state->act_priority != new_act_prio)) |
| rc = xive_target_interrupt(kvm, state, server, new_act_prio); |
| |
| /* |
| * Perform the final unmasking of the interrupt source |
| * if necessary |
| */ |
| if (priority != MASKED) |
| xive_finish_unmask(xive, sb, state, priority); |
| |
| /* |
| * Finally Update saved_priority to match. Only int_on/off |
| * set this field to a different value. |
| */ |
| state->saved_priority = priority; |
| |
| arch_spin_unlock(&sb->lock); |
| return rc; |
| } |
| |
| int kvmppc_xive_get_xive(struct kvm *kvm, u32 irq, u32 *server, |
| u32 *priority) |
| { |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| u16 idx; |
| |
| if (!xive) |
| return -ENODEV; |
| |
| sb = kvmppc_xive_find_source(xive, irq, &idx); |
| if (!sb) |
| return -EINVAL; |
| state = &sb->irq_state[idx]; |
| arch_spin_lock(&sb->lock); |
| *server = state->guest_server; |
| *priority = state->guest_priority; |
| arch_spin_unlock(&sb->lock); |
| |
| return 0; |
| } |
| |
| int kvmppc_xive_int_on(struct kvm *kvm, u32 irq) |
| { |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| u16 idx; |
| |
| if (!xive) |
| return -ENODEV; |
| |
| sb = kvmppc_xive_find_source(xive, irq, &idx); |
| if (!sb) |
| return -EINVAL; |
| state = &sb->irq_state[idx]; |
| |
| pr_devel("int_on(irq=0x%x)\n", irq); |
| |
| /* |
| * Check if interrupt was not targetted |
| */ |
| if (state->act_priority == MASKED) { |
| pr_devel("int_on on untargetted interrupt\n"); |
| return -EINVAL; |
| } |
| |
| /* If saved_priority is 0xff, do nothing */ |
| if (state->saved_priority == MASKED) |
| return 0; |
| |
| /* |
| * Lock and unmask it. |
| */ |
| xive_lock_for_unmask(sb, state); |
| xive_finish_unmask(xive, sb, state, state->saved_priority); |
| arch_spin_unlock(&sb->lock); |
| |
| return 0; |
| } |
| |
| int kvmppc_xive_int_off(struct kvm *kvm, u32 irq) |
| { |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| u16 idx; |
| |
| if (!xive) |
| return -ENODEV; |
| |
| sb = kvmppc_xive_find_source(xive, irq, &idx); |
| if (!sb) |
| return -EINVAL; |
| state = &sb->irq_state[idx]; |
| |
| pr_devel("int_off(irq=0x%x)\n", irq); |
| |
| /* |
| * Lock and mask |
| */ |
| state->saved_priority = xive_lock_and_mask(xive, sb, state); |
| arch_spin_unlock(&sb->lock); |
| |
| return 0; |
| } |
| |
| static bool xive_restore_pending_irq(struct kvmppc_xive *xive, u32 irq) |
| { |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| u16 idx; |
| |
| sb = kvmppc_xive_find_source(xive, irq, &idx); |
| if (!sb) |
| return false; |
| state = &sb->irq_state[idx]; |
| if (!state->valid) |
| return false; |
| |
| /* |
| * Trigger the IPI. This assumes we never restore a pass-through |
| * interrupt which should be safe enough |
| */ |
| xive_irq_trigger(&state->ipi_data); |
| |
| return true; |
| } |
| |
| u64 kvmppc_xive_get_icp(struct kvm_vcpu *vcpu) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| |
| if (!xc) |
| return 0; |
| |
| /* Return the per-cpu state for state saving/migration */ |
| return (u64)xc->cppr << KVM_REG_PPC_ICP_CPPR_SHIFT | |
| (u64)xc->mfrr << KVM_REG_PPC_ICP_MFRR_SHIFT; |
| } |
| |
| int kvmppc_xive_set_icp(struct kvm_vcpu *vcpu, u64 icpval) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| struct kvmppc_xive *xive = vcpu->kvm->arch.xive; |
| u8 cppr, mfrr; |
| u32 xisr; |
| |
| if (!xc || !xive) |
| return -ENOENT; |
| |
| /* Grab individual state fields. We don't use pending_pri */ |
| cppr = icpval >> KVM_REG_PPC_ICP_CPPR_SHIFT; |
| xisr = (icpval >> KVM_REG_PPC_ICP_XISR_SHIFT) & |
| KVM_REG_PPC_ICP_XISR_MASK; |
| mfrr = icpval >> KVM_REG_PPC_ICP_MFRR_SHIFT; |
| |
| pr_devel("set_icp vcpu %d cppr=0x%x mfrr=0x%x xisr=0x%x\n", |
| xc->server_num, cppr, mfrr, xisr); |
| |
| /* |
| * We can't update the state of a "pushed" VCPU, but that |
| * shouldn't happen. |
| */ |
| if (WARN_ON(vcpu->arch.xive_pushed)) |
| return -EIO; |
| |
| /* Update VCPU HW saved state */ |
| vcpu->arch.xive_saved_state.cppr = cppr; |
| xc->hw_cppr = xc->cppr = cppr; |
| |
| /* |
| * Update MFRR state. If it's not 0xff, we mark the VCPU as |
| * having a pending MFRR change, which will re-evaluate the |
| * target. The VCPU will thus potentially get a spurious |
| * interrupt but that's not a big deal. |
| */ |
| xc->mfrr = mfrr; |
| if (mfrr < cppr) |
| xive_irq_trigger(&xc->vp_ipi_data); |
| |
| /* |
| * Now saved XIRR is "interesting". It means there's something in |
| * the legacy "1 element" queue... for an IPI we simply ignore it, |
| * as the MFRR restore will handle that. For anything else we need |
| * to force a resend of the source. |
| * However the source may not have been setup yet. If that's the |
| * case, we keep that info and increment a counter in the xive to |
| * tell subsequent xive_set_source() to go look. |
| */ |
| if (xisr > XICS_IPI && !xive_restore_pending_irq(xive, xisr)) { |
| xc->delayed_irq = xisr; |
| xive->delayed_irqs++; |
| pr_devel(" xisr restore delayed\n"); |
| } |
| |
| return 0; |
| } |
| |
| int kvmppc_xive_set_mapped(struct kvm *kvm, unsigned long guest_irq, |
| struct irq_desc *host_desc) |
| { |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| struct irq_data *host_data = irq_desc_get_irq_data(host_desc); |
| unsigned int host_irq = irq_desc_get_irq(host_desc); |
| unsigned int hw_irq = (unsigned int)irqd_to_hwirq(host_data); |
| u16 idx; |
| u8 prio; |
| int rc; |
| |
| if (!xive) |
| return -ENODEV; |
| |
| pr_devel("set_mapped girq 0x%lx host HW irq 0x%x...\n",guest_irq, hw_irq); |
| |
| sb = kvmppc_xive_find_source(xive, guest_irq, &idx); |
| if (!sb) |
| return -EINVAL; |
| state = &sb->irq_state[idx]; |
| |
| /* |
| * Mark the passed-through interrupt as going to a VCPU, |
| * this will prevent further EOIs and similar operations |
| * from the XIVE code. It will also mask the interrupt |
| * to either PQ=10 or 11 state, the latter if the interrupt |
| * is pending. This will allow us to unmask or retrigger it |
| * after routing it to the guest with a simple EOI. |
| * |
| * The "state" argument is a "token", all it needs is to be |
| * non-NULL to switch to passed-through or NULL for the |
| * other way around. We may not yet have an actual VCPU |
| * target here and we don't really care. |
| */ |
| rc = irq_set_vcpu_affinity(host_irq, state); |
| if (rc) { |
| pr_err("Failed to set VCPU affinity for irq %d\n", host_irq); |
| return rc; |
| } |
| |
| /* |
| * Mask and read state of IPI. We need to know if its P bit |
| * is set as that means it's potentially already using a |
| * queue entry in the target |
| */ |
| prio = xive_lock_and_mask(xive, sb, state); |
| pr_devel(" old IPI prio %02x P:%d Q:%d\n", prio, |
| state->old_p, state->old_q); |
| |
| /* Turn the IPI hard off */ |
| xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_01); |
| |
| /* Grab info about irq */ |
| state->pt_number = hw_irq; |
| state->pt_data = irq_data_get_irq_handler_data(host_data); |
| |
| /* |
| * Configure the IRQ to match the existing configuration of |
| * the IPI if it was already targetted. Otherwise this will |
| * mask the interrupt in a lossy way (act_priority is 0xff) |
| * which is fine for a never started interrupt. |
| */ |
| xive_native_configure_irq(hw_irq, |
| xive->vp_base + state->act_server, |
| state->act_priority, state->number); |
| |
| /* |
| * We do an EOI to enable the interrupt (and retrigger if needed) |
| * if the guest has the interrupt unmasked and the P bit was *not* |
| * set in the IPI. If it was set, we know a slot may still be in |
| * use in the target queue thus we have to wait for a guest |
| * originated EOI |
| */ |
| if (prio != MASKED && !state->old_p) |
| xive_vm_source_eoi(hw_irq, state->pt_data); |
| |
| /* Clear old_p/old_q as they are no longer relevant */ |
| state->old_p = state->old_q = false; |
| |
| /* Restore guest prio (unlocks EOI) */ |
| mb(); |
| state->guest_priority = prio; |
| arch_spin_unlock(&sb->lock); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(kvmppc_xive_set_mapped); |
| |
| int kvmppc_xive_clr_mapped(struct kvm *kvm, unsigned long guest_irq, |
| struct irq_desc *host_desc) |
| { |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| unsigned int host_irq = irq_desc_get_irq(host_desc); |
| u16 idx; |
| u8 prio; |
| int rc; |
| |
| if (!xive) |
| return -ENODEV; |
| |
| pr_devel("clr_mapped girq 0x%lx...\n", guest_irq); |
| |
| sb = kvmppc_xive_find_source(xive, guest_irq, &idx); |
| if (!sb) |
| return -EINVAL; |
| state = &sb->irq_state[idx]; |
| |
| /* |
| * Mask and read state of IRQ. We need to know if its P bit |
| * is set as that means it's potentially already using a |
| * queue entry in the target |
| */ |
| prio = xive_lock_and_mask(xive, sb, state); |
| pr_devel(" old IRQ prio %02x P:%d Q:%d\n", prio, |
| state->old_p, state->old_q); |
| |
| /* |
| * If old_p is set, the interrupt is pending, we switch it to |
| * PQ=11. This will force a resend in the host so the interrupt |
| * isn't lost to whatver host driver may pick it up |
| */ |
| if (state->old_p) |
| xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_11); |
| |
| /* Release the passed-through interrupt to the host */ |
| rc = irq_set_vcpu_affinity(host_irq, NULL); |
| if (rc) { |
| pr_err("Failed to clr VCPU affinity for irq %d\n", host_irq); |
| return rc; |
| } |
| |
| /* Forget about the IRQ */ |
| state->pt_number = 0; |
| state->pt_data = NULL; |
| |
| /* Reconfigure the IPI */ |
| xive_native_configure_irq(state->ipi_number, |
| xive->vp_base + state->act_server, |
| state->act_priority, state->number); |
| |
| /* |
| * If old_p is set (we have a queue entry potentially |
| * occupied) or the interrupt is masked, we set the IPI |
| * to PQ=10 state. Otherwise we just re-enable it (PQ=00). |
| */ |
| if (prio == MASKED || state->old_p) |
| xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_10); |
| else |
| xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_00); |
| |
| /* Restore guest prio (unlocks EOI) */ |
| mb(); |
| state->guest_priority = prio; |
| arch_spin_unlock(&sb->lock); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(kvmppc_xive_clr_mapped); |
| |
| static void kvmppc_xive_disable_vcpu_interrupts(struct kvm_vcpu *vcpu) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| struct kvm *kvm = vcpu->kvm; |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| int i, j; |
| |
| for (i = 0; i <= xive->max_sbid; i++) { |
| struct kvmppc_xive_src_block *sb = xive->src_blocks[i]; |
| |
| if (!sb) |
| continue; |
| for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++) { |
| struct kvmppc_xive_irq_state *state = &sb->irq_state[j]; |
| |
| if (!state->valid) |
| continue; |
| if (state->act_priority == MASKED) |
| continue; |
| if (state->act_server != xc->server_num) |
| continue; |
| |
| /* Clean it up */ |
| arch_spin_lock(&sb->lock); |
| state->act_priority = MASKED; |
| xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_01); |
| xive_native_configure_irq(state->ipi_number, 0, MASKED, 0); |
| if (state->pt_number) { |
| xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_01); |
| xive_native_configure_irq(state->pt_number, 0, MASKED, 0); |
| } |
| arch_spin_unlock(&sb->lock); |
| } |
| } |
| } |
| |
| void kvmppc_xive_cleanup_vcpu(struct kvm_vcpu *vcpu) |
| { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| struct kvmppc_xive *xive = xc->xive; |
| int i; |
| |
| pr_devel("cleanup_vcpu(cpu=%d)\n", xc->server_num); |
| |
| /* Ensure no interrupt is still routed to that VP */ |
| xc->valid = false; |
| kvmppc_xive_disable_vcpu_interrupts(vcpu); |
| |
| /* Mask the VP IPI */ |
| xive_vm_esb_load(&xc->vp_ipi_data, XIVE_ESB_SET_PQ_01); |
| |
| /* Disable the VP */ |
| xive_native_disable_vp(xc->vp_id); |
| |
| /* Free the queues & associated interrupts */ |
| for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) { |
| struct xive_q *q = &xc->queues[i]; |
| |
| /* Free the escalation irq */ |
| if (xc->esc_virq[i]) { |
| free_irq(xc->esc_virq[i], vcpu); |
| irq_dispose_mapping(xc->esc_virq[i]); |
| kfree(xc->esc_virq_names[i]); |
| } |
| /* Free the queue */ |
| xive_native_disable_queue(xc->vp_id, q, i); |
| if (q->qpage) { |
| free_pages((unsigned long)q->qpage, |
| xive->q_page_order); |
| q->qpage = NULL; |
| } |
| } |
| |
| /* Free the IPI */ |
| if (xc->vp_ipi) { |
| xive_cleanup_irq_data(&xc->vp_ipi_data); |
| xive_native_free_irq(xc->vp_ipi); |
| } |
| /* Free the VP */ |
| kfree(xc); |
| } |
| |
| int kvmppc_xive_connect_vcpu(struct kvm_device *dev, |
| struct kvm_vcpu *vcpu, u32 cpu) |
| { |
| struct kvmppc_xive *xive = dev->private; |
| struct kvmppc_xive_vcpu *xc; |
| int i, r = -EBUSY; |
| |
| pr_devel("connect_vcpu(cpu=%d)\n", cpu); |
| |
| if (dev->ops != &kvm_xive_ops) { |
| pr_devel("Wrong ops !\n"); |
| return -EPERM; |
| } |
| if (xive->kvm != vcpu->kvm) |
| return -EPERM; |
| if (vcpu->arch.irq_type) |
| return -EBUSY; |
| if (kvmppc_xive_find_server(vcpu->kvm, cpu)) { |
| pr_devel("Duplicate !\n"); |
| return -EEXIST; |
| } |
| if (cpu >= KVM_MAX_VCPUS) { |
| pr_devel("Out of bounds !\n"); |
| return -EINVAL; |
| } |
| xc = kzalloc(sizeof(*xc), GFP_KERNEL); |
| if (!xc) |
| return -ENOMEM; |
| |
| /* We need to synchronize with queue provisioning */ |
| mutex_lock(&vcpu->kvm->lock); |
| vcpu->arch.xive_vcpu = xc; |
| xc->xive = xive; |
| xc->vcpu = vcpu; |
| xc->server_num = cpu; |
| xc->vp_id = xive->vp_base + cpu; |
| xc->mfrr = 0xff; |
| xc->valid = true; |
| |
| r = xive_native_get_vp_info(xc->vp_id, &xc->vp_cam, &xc->vp_chip_id); |
| if (r) |
| goto bail; |
| |
| /* Configure VCPU fields for use by assembly push/pull */ |
| vcpu->arch.xive_saved_state.w01 = cpu_to_be64(0xff000000); |
| vcpu->arch.xive_cam_word = cpu_to_be32(xc->vp_cam | TM_QW1W2_VO); |
| |
| /* Allocate IPI */ |
| xc->vp_ipi = xive_native_alloc_irq(); |
| if (!xc->vp_ipi) { |
| r = -EIO; |
| goto bail; |
| } |
| pr_devel(" IPI=0x%x\n", xc->vp_ipi); |
| |
| r = xive_native_populate_irq_data(xc->vp_ipi, &xc->vp_ipi_data); |
| if (r) |
| goto bail; |
| |
| /* |
| * Initialize queues. Initially we set them all for no queueing |
| * and we enable escalation for queue 0 only which we'll use for |
| * our mfrr change notifications. If the VCPU is hot-plugged, we |
| * do handle provisioning however. |
| */ |
| for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) { |
| struct xive_q *q = &xc->queues[i]; |
| |
| /* Is queue already enabled ? Provision it */ |
| if (xive->qmap & (1 << i)) { |
| r = xive_provision_queue(vcpu, i); |
| if (r == 0) |
| xive_attach_escalation(vcpu, i); |
| if (r) |
| goto bail; |
| } else { |
| r = xive_native_configure_queue(xc->vp_id, |
| q, i, NULL, 0, true); |
| if (r) { |
| pr_err("Failed to configure queue %d for VCPU %d\n", |
| i, cpu); |
| goto bail; |
| } |
| } |
| } |
| |
| /* If not done above, attach priority 0 escalation */ |
| r = xive_attach_escalation(vcpu, 0); |
| if (r) |
| goto bail; |
| |
| /* Enable the VP */ |
| r = xive_native_enable_vp(xc->vp_id); |
| if (r) |
| goto bail; |
| |
| /* Route the IPI */ |
| r = xive_native_configure_irq(xc->vp_ipi, xc->vp_id, 0, XICS_IPI); |
| if (!r) |
| xive_vm_esb_load(&xc->vp_ipi_data, XIVE_ESB_SET_PQ_00); |
| |
| bail: |
| mutex_unlock(&vcpu->kvm->lock); |
| if (r) { |
| kvmppc_xive_cleanup_vcpu(vcpu); |
| return r; |
| } |
| |
| vcpu->arch.irq_type = KVMPPC_IRQ_XICS; |
| return 0; |
| } |
| |
| /* |
| * Scanning of queues before/after migration save |
| */ |
| static void xive_pre_save_set_queued(struct kvmppc_xive *xive, u32 irq) |
| { |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| u16 idx; |
| |
| sb = kvmppc_xive_find_source(xive, irq, &idx); |
| if (!sb) |
| return; |
| |
| state = &sb->irq_state[idx]; |
| |
| /* Some sanity checking */ |
| if (!state->valid) { |
| pr_err("invalid irq 0x%x in cpu queue!\n", irq); |
| return; |
| } |
| |
| /* |
| * If the interrupt is in a queue it should have P set. |
| * We warn so that gets reported. A backtrace isn't useful |
| * so no need to use a WARN_ON. |
| */ |
| if (!state->saved_p) |
| pr_err("Interrupt 0x%x is marked in a queue but P not set !\n", irq); |
| |
| /* Set flag */ |
| state->in_queue = true; |
| } |
| |
| static void xive_pre_save_mask_irq(struct kvmppc_xive *xive, |
| struct kvmppc_xive_src_block *sb, |
| u32 irq) |
| { |
| struct kvmppc_xive_irq_state *state = &sb->irq_state[irq]; |
| |
| if (!state->valid) |
| return; |
| |
| /* Mask and save state, this will also sync HW queues */ |
| state->saved_scan_prio = xive_lock_and_mask(xive, sb, state); |
| |
| /* Transfer P and Q */ |
| state->saved_p = state->old_p; |
| state->saved_q = state->old_q; |
| |
| /* Unlock */ |
| arch_spin_unlock(&sb->lock); |
| } |
| |
| static void xive_pre_save_unmask_irq(struct kvmppc_xive *xive, |
| struct kvmppc_xive_src_block *sb, |
| u32 irq) |
| { |
| struct kvmppc_xive_irq_state *state = &sb->irq_state[irq]; |
| |
| if (!state->valid) |
| return; |
| |
| /* |
| * Lock / exclude EOI (not technically necessary if the |
| * guest isn't running concurrently. If this becomes a |
| * performance issue we can probably remove the lock. |
| */ |
| xive_lock_for_unmask(sb, state); |
| |
| /* Restore mask/prio if it wasn't masked */ |
| if (state->saved_scan_prio != MASKED) |
| xive_finish_unmask(xive, sb, state, state->saved_scan_prio); |
| |
| /* Unlock */ |
| arch_spin_unlock(&sb->lock); |
| } |
| |
| static void xive_pre_save_queue(struct kvmppc_xive *xive, struct xive_q *q) |
| { |
| u32 idx = q->idx; |
| u32 toggle = q->toggle; |
| u32 irq; |
| |
| do { |
| irq = __xive_read_eq(q->qpage, q->msk, &idx, &toggle); |
| if (irq > XICS_IPI) |
| xive_pre_save_set_queued(xive, irq); |
| } while(irq); |
| } |
| |
| static void xive_pre_save_scan(struct kvmppc_xive *xive) |
| { |
| struct kvm_vcpu *vcpu = NULL; |
| int i, j; |
| |
| /* |
| * See comment in xive_get_source() about how this |
| * work. Collect a stable state for all interrupts |
| */ |
| for (i = 0; i <= xive->max_sbid; i++) { |
| struct kvmppc_xive_src_block *sb = xive->src_blocks[i]; |
| if (!sb) |
| continue; |
| for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++) |
| xive_pre_save_mask_irq(xive, sb, j); |
| } |
| |
| /* Then scan the queues and update the "in_queue" flag */ |
| kvm_for_each_vcpu(i, vcpu, xive->kvm) { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| if (!xc) |
| continue; |
| for (j = 0; j < KVMPPC_XIVE_Q_COUNT; j++) { |
| if (xc->queues[j].qpage) |
| xive_pre_save_queue(xive, &xc->queues[j]); |
| } |
| } |
| |
| /* Finally restore interrupt states */ |
| for (i = 0; i <= xive->max_sbid; i++) { |
| struct kvmppc_xive_src_block *sb = xive->src_blocks[i]; |
| if (!sb) |
| continue; |
| for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++) |
| xive_pre_save_unmask_irq(xive, sb, j); |
| } |
| } |
| |
| static void xive_post_save_scan(struct kvmppc_xive *xive) |
| { |
| u32 i, j; |
| |
| /* Clear all the in_queue flags */ |
| for (i = 0; i <= xive->max_sbid; i++) { |
| struct kvmppc_xive_src_block *sb = xive->src_blocks[i]; |
| if (!sb) |
| continue; |
| for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++) |
| sb->irq_state[j].in_queue = false; |
| } |
| |
| /* Next get_source() will do a new scan */ |
| xive->saved_src_count = 0; |
| } |
| |
| /* |
| * This returns the source configuration and state to user space. |
| */ |
| static int xive_get_source(struct kvmppc_xive *xive, long irq, u64 addr) |
| { |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| u64 __user *ubufp = (u64 __user *) addr; |
| u64 val, prio; |
| u16 idx; |
| |
| sb = kvmppc_xive_find_source(xive, irq, &idx); |
| if (!sb) |
| return -ENOENT; |
| |
| state = &sb->irq_state[idx]; |
| |
| if (!state->valid) |
| return -ENOENT; |
| |
| pr_devel("get_source(%ld)...\n", irq); |
| |
| /* |
| * So to properly save the state into something that looks like a |
| * XICS migration stream we cannot treat interrupts individually. |
| * |
| * We need, instead, mask them all (& save their previous PQ state) |
| * to get a stable state in the HW, then sync them to ensure that |
| * any interrupt that had already fired hits its queue, and finally |
| * scan all the queues to collect which interrupts are still present |
| * in the queues, so we can set the "pending" flag on them and |
| * they can be resent on restore. |
| * |
| * So we do it all when the "first" interrupt gets saved, all the |
| * state is collected at that point, the rest of xive_get_source() |
| * will merely collect and convert that state to the expected |
| * userspace bit mask. |
| */ |
| if (xive->saved_src_count == 0) |
| xive_pre_save_scan(xive); |
| xive->saved_src_count++; |
| |
| /* Convert saved state into something compatible with xics */ |
| val = state->guest_server; |
| prio = state->saved_scan_prio; |
| |
| if (prio == MASKED) { |
| val |= KVM_XICS_MASKED; |
| prio = state->saved_priority; |
| } |
| val |= prio << KVM_XICS_PRIORITY_SHIFT; |
| if (state->lsi) { |
| val |= KVM_XICS_LEVEL_SENSITIVE; |
| if (state->saved_p) |
| val |= KVM_XICS_PENDING; |
| } else { |
| if (state->saved_p) |
| val |= KVM_XICS_PRESENTED; |
| |
| if (state->saved_q) |
| val |= KVM_XICS_QUEUED; |
| |
| /* |
| * We mark it pending (which will attempt a re-delivery) |
| * if we are in a queue *or* we were masked and had |
| * Q set which is equivalent to the XICS "masked pending" |
| * state |
| */ |
| if (state->in_queue || (prio == MASKED && state->saved_q)) |
| val |= KVM_XICS_PENDING; |
| } |
| |
| /* |
| * If that was the last interrupt saved, reset the |
| * in_queue flags |
| */ |
| if (xive->saved_src_count == xive->src_count) |
| xive_post_save_scan(xive); |
| |
| /* Copy the result to userspace */ |
| if (put_user(val, ubufp)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static struct kvmppc_xive_src_block *xive_create_src_block(struct kvmppc_xive *xive, |
| int irq) |
| { |
| struct kvm *kvm = xive->kvm; |
| struct kvmppc_xive_src_block *sb; |
| int i, bid; |
| |
| bid = irq >> KVMPPC_XICS_ICS_SHIFT; |
| |
| mutex_lock(&kvm->lock); |
| |
| /* block already exists - somebody else got here first */ |
| if (xive->src_blocks[bid]) |
| goto out; |
| |
| /* Create the ICS */ |
| sb = kzalloc(sizeof(*sb), GFP_KERNEL); |
| if (!sb) |
| goto out; |
| |
| sb->id = bid; |
| |
| for (i = 0; i < KVMPPC_XICS_IRQ_PER_ICS; i++) { |
| sb->irq_state[i].number = (bid << KVMPPC_XICS_ICS_SHIFT) | i; |
| sb->irq_state[i].guest_priority = MASKED; |
| sb->irq_state[i].saved_priority = MASKED; |
| sb->irq_state[i].act_priority = MASKED; |
| } |
| smp_wmb(); |
| xive->src_blocks[bid] = sb; |
| |
| if (bid > xive->max_sbid) |
| xive->max_sbid = bid; |
| |
| out: |
| mutex_unlock(&kvm->lock); |
| return xive->src_blocks[bid]; |
| } |
| |
| static bool xive_check_delayed_irq(struct kvmppc_xive *xive, u32 irq) |
| { |
| struct kvm *kvm = xive->kvm; |
| struct kvm_vcpu *vcpu = NULL; |
| int i; |
| |
| kvm_for_each_vcpu(i, vcpu, kvm) { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| |
| if (!xc) |
| continue; |
| |
| if (xc->delayed_irq == irq) { |
| xc->delayed_irq = 0; |
| xive->delayed_irqs--; |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| static int xive_set_source(struct kvmppc_xive *xive, long irq, u64 addr) |
| { |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| u64 __user *ubufp = (u64 __user *) addr; |
| u16 idx; |
| u64 val; |
| u8 act_prio, guest_prio; |
| u32 server; |
| int rc = 0; |
| |
| if (irq < KVMPPC_XICS_FIRST_IRQ || irq >= KVMPPC_XICS_NR_IRQS) |
| return -ENOENT; |
| |
| pr_devel("set_source(irq=0x%lx)\n", irq); |
| |
| /* Find the source */ |
| sb = kvmppc_xive_find_source(xive, irq, &idx); |
| if (!sb) { |
| pr_devel("No source, creating source block...\n"); |
| sb = xive_create_src_block(xive, irq); |
| if (!sb) { |
| pr_devel("Failed to create block...\n"); |
| return -ENOMEM; |
| } |
| } |
| state = &sb->irq_state[idx]; |
| |
| /* Read user passed data */ |
| if (get_user(val, ubufp)) { |
| pr_devel("fault getting user info !\n"); |
| return -EFAULT; |
| } |
| |
| server = val & KVM_XICS_DESTINATION_MASK; |
| guest_prio = val >> KVM_XICS_PRIORITY_SHIFT; |
| |
| pr_devel(" val=0x016%llx (server=0x%x, guest_prio=%d)\n", |
| val, server, guest_prio); |
| /* |
| * If the source doesn't already have an IPI, allocate |
| * one and get the corresponding data |
| */ |
| if (!state->ipi_number) { |
| state->ipi_number = xive_native_alloc_irq(); |
| if (state->ipi_number == 0) { |
| pr_devel("Failed to allocate IPI !\n"); |
| return -ENOMEM; |
| } |
| xive_native_populate_irq_data(state->ipi_number, &state->ipi_data); |
| pr_devel(" src_ipi=0x%x\n", state->ipi_number); |
| } |
| |
| /* |
| * We use lock_and_mask() to set us in the right masked |
| * state. We will override that state from the saved state |
| * further down, but this will handle the cases of interrupts |
| * that need FW masking. We set the initial guest_priority to |
| * 0 before calling it to ensure it actually performs the masking. |
| */ |
| state->guest_priority = 0; |
| xive_lock_and_mask(xive, sb, state); |
| |
| /* |
| * Now, we select a target if we have one. If we don't we |
| * leave the interrupt untargetted. It means that an interrupt |
| * can become "untargetted" accross migration if it was masked |
| * by set_xive() but there is little we can do about it. |
| */ |
| |
| /* First convert prio and mark interrupt as untargetted */ |
| act_prio = xive_prio_from_guest(guest_prio); |
| state->act_priority = MASKED; |
| state->guest_server = server; |
| |
| /* |
| * We need to drop the lock due to the mutex below. Hopefully |
| * nothing is touching that interrupt yet since it hasn't been |
| * advertized to a running guest yet |
| */ |
| arch_spin_unlock(&sb->lock); |
| |
| /* If we have a priority target the interrupt */ |
| if (act_prio != MASKED) { |
| /* First, check provisioning of queues */ |
| mutex_lock(&xive->kvm->lock); |
| rc = xive_check_provisioning(xive->kvm, act_prio); |
| mutex_unlock(&xive->kvm->lock); |
| |
| /* Target interrupt */ |
| if (rc == 0) |
| rc = xive_target_interrupt(xive->kvm, state, |
| server, act_prio); |
| /* |
| * If provisioning or targetting failed, leave it |
| * alone and masked. It will remain disabled until |
| * the guest re-targets it. |
| */ |
| } |
| |
| /* |
| * Find out if this was a delayed irq stashed in an ICP, |
| * in which case, treat it as pending |
| */ |
| if (xive->delayed_irqs && xive_check_delayed_irq(xive, irq)) { |
| val |= KVM_XICS_PENDING; |
| pr_devel(" Found delayed ! forcing PENDING !\n"); |
| } |
| |
| /* Cleanup the SW state */ |
| state->old_p = false; |
| state->old_q = false; |
| state->lsi = false; |
| state->asserted = false; |
| |
| /* Restore LSI state */ |
| if (val & KVM_XICS_LEVEL_SENSITIVE) { |
| state->lsi = true; |
| if (val & KVM_XICS_PENDING) |
| state->asserted = true; |
| pr_devel(" LSI ! Asserted=%d\n", state->asserted); |
| } |
| |
| /* |
| * Restore P and Q. If the interrupt was pending, we |
| * force both P and Q, which will trigger a resend. |
| * |
| * That means that a guest that had both an interrupt |
| * pending (queued) and Q set will restore with only |
| * one instance of that interrupt instead of 2, but that |
| * is perfectly fine as coalescing interrupts that haven't |
| * been presented yet is always allowed. |
| */ |
| if (val & KVM_XICS_PRESENTED || val & KVM_XICS_PENDING) |
| state->old_p = true; |
| if (val & KVM_XICS_QUEUED || val & KVM_XICS_PENDING) |
| state->old_q = true; |
| |
| pr_devel(" P=%d, Q=%d\n", state->old_p, state->old_q); |
| |
| /* |
| * If the interrupt was unmasked, update guest priority and |
| * perform the appropriate state transition and do a |
| * re-trigger if necessary. |
| */ |
| if (val & KVM_XICS_MASKED) { |
| pr_devel(" masked, saving prio\n"); |
| state->guest_priority = MASKED; |
| state->saved_priority = guest_prio; |
| } else { |
| pr_devel(" unmasked, restoring to prio %d\n", guest_prio); |
| xive_finish_unmask(xive, sb, state, guest_prio); |
| state->saved_priority = guest_prio; |
| } |
| |
| /* Increment the number of valid sources and mark this one valid */ |
| if (!state->valid) |
| xive->src_count++; |
| state->valid = true; |
| |
| return 0; |
| } |
| |
| int kvmppc_xive_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level, |
| bool line_status) |
| { |
| struct kvmppc_xive *xive = kvm->arch.xive; |
| struct kvmppc_xive_src_block *sb; |
| struct kvmppc_xive_irq_state *state; |
| u16 idx; |
| |
| if (!xive) |
| return -ENODEV; |
| |
| sb = kvmppc_xive_find_source(xive, irq, &idx); |
| if (!sb) |
| return -EINVAL; |
| |
| /* Perform locklessly .... (we need to do some RCUisms here...) */ |
| state = &sb->irq_state[idx]; |
| if (!state->valid) |
| return -EINVAL; |
| |
| /* We don't allow a trigger on a passed-through interrupt */ |
| if (state->pt_number) |
| return -EINVAL; |
| |
| if ((level == 1 && state->lsi) || level == KVM_INTERRUPT_SET_LEVEL) |
| state->asserted = 1; |
| else if (level == 0 || level == KVM_INTERRUPT_UNSET) { |
| state->asserted = 0; |
| return 0; |
| } |
| |
| /* Trigger the IPI */ |
| xive_irq_trigger(&state->ipi_data); |
| |
| return 0; |
| } |
| |
| static int xive_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr) |
| { |
| struct kvmppc_xive *xive = dev->private; |
| |
| /* We honor the existing XICS ioctl */ |
| switch (attr->group) { |
| case KVM_DEV_XICS_GRP_SOURCES: |
| return xive_set_source(xive, attr->attr, attr->addr); |
| } |
| return -ENXIO; |
| } |
| |
| static int xive_get_attr(struct kvm_device *dev, struct kvm_device_attr *attr) |
| { |
| struct kvmppc_xive *xive = dev->private; |
| |
| /* We honor the existing XICS ioctl */ |
| switch (attr->group) { |
| case KVM_DEV_XICS_GRP_SOURCES: |
| return xive_get_source(xive, attr->attr, attr->addr); |
| } |
| return -ENXIO; |
| } |
| |
| static int xive_has_attr(struct kvm_device *dev, struct kvm_device_attr *attr) |
| { |
| /* We honor the same limits as XICS, at least for now */ |
| switch (attr->group) { |
| case KVM_DEV_XICS_GRP_SOURCES: |
| if (attr->attr >= KVMPPC_XICS_FIRST_IRQ && |
| attr->attr < KVMPPC_XICS_NR_IRQS) |
| return 0; |
| break; |
| } |
| return -ENXIO; |
| } |
| |
| static void kvmppc_xive_cleanup_irq(u32 hw_num, struct xive_irq_data *xd) |
| { |
| xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_01); |
| xive_native_configure_irq(hw_num, 0, MASKED, 0); |
| xive_cleanup_irq_data(xd); |
| } |
| |
| static void kvmppc_xive_free_sources(struct kvmppc_xive_src_block *sb) |
| { |
| int i; |
| |
| for (i = 0; i < KVMPPC_XICS_IRQ_PER_ICS; i++) { |
| struct kvmppc_xive_irq_state *state = &sb->irq_state[i]; |
| |
| if (!state->valid) |
| continue; |
| |
| kvmppc_xive_cleanup_irq(state->ipi_number, &state->ipi_data); |
| xive_native_free_irq(state->ipi_number); |
| |
| /* Pass-through, cleanup too */ |
| if (state->pt_number) |
| kvmppc_xive_cleanup_irq(state->pt_number, state->pt_data); |
| |
| state->valid = false; |
| } |
| } |
| |
| static void kvmppc_xive_free(struct kvm_device *dev) |
| { |
| struct kvmppc_xive *xive = dev->private; |
| struct kvm *kvm = xive->kvm; |
| int i; |
| |
| debugfs_remove(xive->dentry); |
| |
| if (kvm) |
| kvm->arch.xive = NULL; |
| |
| /* Mask and free interrupts */ |
| for (i = 0; i <= xive->max_sbid; i++) { |
| if (xive->src_blocks[i]) |
| kvmppc_xive_free_sources(xive->src_blocks[i]); |
| kfree(xive->src_blocks[i]); |
| xive->src_blocks[i] = NULL; |
| } |
| |
| if (xive->vp_base != XIVE_INVALID_VP) |
| xive_native_free_vp_block(xive->vp_base); |
| |
| |
| kfree(xive); |
| kfree(dev); |
| } |
| |
| static int kvmppc_xive_create(struct kvm_device *dev, u32 type) |
| { |
| struct kvmppc_xive *xive; |
| struct kvm *kvm = dev->kvm; |
| int ret = 0; |
| |
| pr_devel("Creating xive for partition\n"); |
| |
| xive = kzalloc(sizeof(*xive), GFP_KERNEL); |
| if (!xive) |
| return -ENOMEM; |
| |
| dev->private = xive; |
| xive->dev = dev; |
| xive->kvm = kvm; |
| |
| /* Already there ? */ |
| if (kvm->arch.xive) |
| ret = -EEXIST; |
| else |
| kvm->arch.xive = xive; |
| |
| /* We use the default queue size set by the host */ |
| xive->q_order = xive_native_default_eq_shift(); |
| if (xive->q_order < PAGE_SHIFT) |
| xive->q_page_order = 0; |
| else |
| xive->q_page_order = xive->q_order - PAGE_SHIFT; |
| |
| /* Allocate a bunch of VPs */ |
| xive->vp_base = xive_native_alloc_vp_block(KVM_MAX_VCPUS); |
| pr_devel("VP_Base=%x\n", xive->vp_base); |
| |
| if (xive->vp_base == XIVE_INVALID_VP) |
| ret = -ENOMEM; |
| |
| if (ret) { |
| kfree(xive); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int xive_debug_show(struct seq_file *m, void *private) |
| { |
| struct kvmppc_xive *xive = m->private; |
| struct kvm *kvm = xive->kvm; |
| struct kvm_vcpu *vcpu; |
| u64 t_rm_h_xirr = 0; |
| u64 t_rm_h_ipoll = 0; |
| u64 t_rm_h_cppr = 0; |
| u64 t_rm_h_eoi = 0; |
| u64 t_rm_h_ipi = 0; |
| u64 t_vm_h_xirr = 0; |
| u64 t_vm_h_ipoll = 0; |
| u64 t_vm_h_cppr = 0; |
| u64 t_vm_h_eoi = 0; |
| u64 t_vm_h_ipi = 0; |
| unsigned int i; |
| |
| if (!kvm) |
| return 0; |
| |
| seq_printf(m, "=========\nVCPU state\n=========\n"); |
| |
| kvm_for_each_vcpu(i, vcpu, kvm) { |
| struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu; |
| |
| if (!xc) |
| continue; |
| |
| seq_printf(m, "cpu server %#x CPPR:%#x HWCPPR:%#x" |
| " MFRR:%#x PEND:%#x h_xirr: R=%lld V=%lld\n", |
| xc->server_num, xc->cppr, xc->hw_cppr, |
| xc->mfrr, xc->pending, |
| xc->stat_rm_h_xirr, xc->stat_vm_h_xirr); |
| |
| t_rm_h_xirr += xc->stat_rm_h_xirr; |
| t_rm_h_ipoll += xc->stat_rm_h_ipoll; |
| t_rm_h_cppr += xc->stat_rm_h_cppr; |
| t_rm_h_eoi += xc->stat_rm_h_eoi; |
| t_rm_h_ipi += xc->stat_rm_h_ipi; |
| t_vm_h_xirr += xc->stat_vm_h_xirr; |
| t_vm_h_ipoll += xc->stat_vm_h_ipoll; |
| t_vm_h_cppr += xc->stat_vm_h_cppr; |
| t_vm_h_eoi += xc->stat_vm_h_eoi; |
| t_vm_h_ipi += xc->stat_vm_h_ipi; |
| } |
| |
| seq_printf(m, "Hcalls totals\n"); |
| seq_printf(m, " H_XIRR R=%10lld V=%10lld\n", t_rm_h_xirr, t_vm_h_xirr); |
| seq_printf(m, " H_IPOLL R=%10lld V=%10lld\n", t_rm_h_ipoll, t_vm_h_ipoll); |
| seq_printf(m, " H_CPPR R=%10lld V=%10lld\n", t_rm_h_cppr, t_vm_h_cppr); |
| seq_printf(m, " H_EOI R=%10lld V=%10lld\n", t_rm_h_eoi, t_vm_h_eoi); |
| seq_printf(m, " H_IPI R=%10lld V=%10lld\n", t_rm_h_ipi, t_vm_h_ipi); |
| |
| return 0; |
| } |
| |
| static int xive_debug_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, xive_debug_show, inode->i_private); |
| } |
| |
| static const struct file_operations xive_debug_fops = { |
| .open = xive_debug_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static void xive_debugfs_init(struct kvmppc_xive *xive) |
| { |
| char *name; |
| |
| name = kasprintf(GFP_KERNEL, "kvm-xive-%p", xive); |
| if (!name) { |
| pr_err("%s: no memory for name\n", __func__); |
| return; |
| } |
| |
| xive->dentry = debugfs_create_file(name, S_IRUGO, powerpc_debugfs_root, |
| xive, &xive_debug_fops); |
| |
| pr_debug("%s: created %s\n", __func__, name); |
| kfree(name); |
| } |
| |
| static void kvmppc_xive_init(struct kvm_device *dev) |
| { |
| struct kvmppc_xive *xive = (struct kvmppc_xive *)dev->private; |
| |
| /* Register some debug interfaces */ |
| xive_debugfs_init(xive); |
| } |
| |
| struct kvm_device_ops kvm_xive_ops = { |
| .name = "kvm-xive", |
| .create = kvmppc_xive_create, |
| .init = kvmppc_xive_init, |
| .destroy = kvmppc_xive_free, |
| .set_attr = xive_set_attr, |
| .get_attr = xive_get_attr, |
| .has_attr = xive_has_attr, |
| }; |
| |
| void kvmppc_xive_init_module(void) |
| { |
| __xive_vm_h_xirr = xive_vm_h_xirr; |
| __xive_vm_h_ipoll = xive_vm_h_ipoll; |
| __xive_vm_h_ipi = xive_vm_h_ipi; |
| __xive_vm_h_cppr = xive_vm_h_cppr; |
| __xive_vm_h_eoi = xive_vm_h_eoi; |
| } |
| |
| void kvmppc_xive_exit_module(void) |
| { |
| __xive_vm_h_xirr = NULL; |
| __xive_vm_h_ipoll = NULL; |
| __xive_vm_h_ipi = NULL; |
| __xive_vm_h_cppr = NULL; |
| __xive_vm_h_eoi = NULL; |
| } |