blob: 3fcc85f60fbf2d78b7ee8ba29c8733026e951fcd [file] [log] [blame]
/*
* mpc7448_hpc2.c
*
* Board setup routines for the Freescale mpc7448hpc2(taiga) platform
*
* Author: Jacob Pan
* jacob.pan@freescale.com
* Author: Xianghua Xiao
* x.xiao@freescale.com
* Maintainer: Roy Zang <tie-fei.zang@freescale.com>
* Add Flat Device Tree support fot mpc7448hpc2 board
*
* Copyright 2004-2006 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/tsi108.h>
#include <asm/pci-bridge.h>
#include <asm/reg.h>
#include <mm/mmu_decl.h>
#include "mpc7448_hpc2.h"
#include <asm/tsi108_irq.h>
#include <asm/mpic.h>
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) do { printk(fmt); } while(0)
#else
#define DBG(fmt...) do { } while(0)
#endif
#ifndef CONFIG_PCI
isa_io_base = MPC7448_HPC2_ISA_IO_BASE;
isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE;
pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
#endif
extern int tsi108_setup_pci(struct device_node *dev);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
extern void tsi108_pci_int_init(struct device_node *node);
extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
static void __init mpc7448_hpc2_setup_arch(void)
{
struct device_node *cpu;
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0);
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu != 0) {
const unsigned int *fp;
fp = get_property(cpu, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(cpu);
}
tsi108_csr_vir_base = get_vir_csrbase();
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
#ifdef CONFIG_BLK_DEV_INITRD
ROOT_DEV = Root_RAM0;
#endif
/* setup PCI host bridge */
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
tsi108_setup_pci(np);
ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;
if (ppc_md.progress)
ppc_md.progress("tsi108: resources set", 0x100);
#endif
printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n");
printk(KERN_INFO
"Jointly ported by Freescale and Tundra Semiconductor\n");
printk(KERN_INFO
"Enabling L2 cache then enabling the HID0 prefetch engine.\n");
}
/*
* Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come
* from the four external INT pins, PCI interrupts are routed via
* PCI interrupt control registers, it generates internal IRQ23
*
* Interrupt routing on the Taiga Board:
* TSI108:PB_INT[0] -> CPU0:INT#
* TSI108:PB_INT[1] -> CPU0:MCP#
* TSI108:PB_INT[2] -> N/C
* TSI108:PB_INT[3] -> N/C
*/
static void __init mpc7448_hpc2_init_IRQ(void)
{
struct mpic *mpic;
phys_addr_t mpic_paddr = 0;
struct device_node *tsi_pic;
#ifdef CONFIG_PCI
unsigned int cascade_pci_irq;
struct device_node *tsi_pci;
struct device_node *cascade_node = NULL;
#endif
tsi_pic = of_find_node_by_type(NULL, "open-pic");
if (tsi_pic) {
unsigned int size;
const void *prop = get_property(tsi_pic, "reg", &size);
mpic_paddr = of_translate_address(tsi_pic, prop);
}
if (mpic_paddr == 0) {
printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
return;
}
DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
(u32) mpic_paddr);
mpic = mpic_alloc(tsi_pic, mpic_paddr,
MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
24,
NR_IRQS-4, /* num_sources used */
"Tsi108_PIC");
BUG_ON(mpic == NULL);
mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
mpic_init(mpic);
#ifdef CONFIG_PCI
tsi_pci = of_find_node_by_type(NULL, "pci");
if (tsi_pci == NULL) {
printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
return;
}
cascade_node = of_find_node_by_type(NULL, "pic-router");
if (cascade_node == NULL) {
printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
return;
}
cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
(u32) cascade_pci_irq);
tsi108_pci_int_init(cascade_node);
set_irq_data(cascade_pci_irq, mpic);
set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
#endif
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
of_node_put(tsi_pic);
}
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
seq_printf(m, "machine\t\t: MPC7448hpc2\n");
}
void mpc7448_hpc2_restart(char *cmd)
{
local_irq_disable();
/* Set exception prefix high - to the firmware */
_nmask_and_or_msr(0, MSR_IP);
for (;;) ; /* Spin until reset happens */
}
void mpc7448_hpc2_power_off(void)
{
local_irq_disable();
for (;;) ; /* No way to shut power off with software */
}
void mpc7448_hpc2_halt(void)
{
mpc7448_hpc2_power_off();
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init mpc7448_hpc2_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "mpc74xx"))
return 0;
return 1;
}
static int mpc7448_machine_check_exception(struct pt_regs *regs)
{
extern void tsi108_clear_pci_cfg_error(void);
const struct exception_table_entry *entry;
/* Are we prepared to handle this fault */
if ((entry = search_exception_tables(regs->nip)) != NULL) {
tsi108_clear_pci_cfg_error();
regs->msr |= MSR_RI;
regs->nip = entry->fixup;
return 1;
}
return 0;
}
define_machine(mpc7448_hpc2){
.name = "MPC7448 HPC2",
.probe = mpc7448_hpc2_probe,
.setup_arch = mpc7448_hpc2_setup_arch,
.init_IRQ = mpc7448_hpc2_init_IRQ,
.show_cpuinfo = mpc7448_hpc2_show_cpuinfo,
.get_irq = mpic_get_irq,
.restart = mpc7448_hpc2_restart,
.calibrate_decr = generic_calibrate_decr,
.machine_check_exception= mpc7448_machine_check_exception,
.progress = udbg_progress,
};