| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/init.h> |
| #include <linux/mm.h> |
| #include <asm/mtrr.h> |
| #include <asm/msr.h> |
| |
| #include "mtrr.h" |
| |
| static void |
| amd_get_mtrr(unsigned int reg, unsigned long *base, |
| unsigned long *size, mtrr_type *type) |
| { |
| unsigned long low, high; |
| |
| rdmsr(MSR_K6_UWCCR, low, high); |
| /* Upper dword is region 1, lower is region 0 */ |
| if (reg == 1) |
| low = high; |
| /* The base masks off on the right alignment */ |
| *base = (low & 0xFFFE0000) >> PAGE_SHIFT; |
| *type = 0; |
| if (low & 1) |
| *type = MTRR_TYPE_UNCACHABLE; |
| if (low & 2) |
| *type = MTRR_TYPE_WRCOMB; |
| if (!(low & 3)) { |
| *size = 0; |
| return; |
| } |
| /* |
| * This needs a little explaining. The size is stored as an |
| * inverted mask of bits of 128K granularity 15 bits long offset |
| * 2 bits. |
| * |
| * So to get a size we do invert the mask and add 1 to the lowest |
| * mask bit (4 as its 2 bits in). This gives us a size we then shift |
| * to turn into 128K blocks. |
| * |
| * eg 111 1111 1111 1100 is 512K |
| * |
| * invert 000 0000 0000 0011 |
| * +1 000 0000 0000 0100 |
| * *128K ... |
| */ |
| low = (~low) & 0x1FFFC; |
| *size = (low + 4) << (15 - PAGE_SHIFT); |
| } |
| |
| /** |
| * amd_set_mtrr - Set variable MTRR register on the local CPU. |
| * |
| * @reg The register to set. |
| * @base The base address of the region. |
| * @size The size of the region. If this is 0 the region is disabled. |
| * @type The type of the region. |
| * |
| * Returns nothing. |
| */ |
| static void |
| amd_set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type) |
| { |
| u32 regs[2]; |
| |
| /* |
| * Low is MTRR0, High MTRR 1 |
| */ |
| rdmsr(MSR_K6_UWCCR, regs[0], regs[1]); |
| /* |
| * Blank to disable |
| */ |
| if (size == 0) { |
| regs[reg] = 0; |
| } else { |
| /* |
| * Set the register to the base, the type (off by one) and an |
| * inverted bitmask of the size The size is the only odd |
| * bit. We are fed say 512K We invert this and we get 111 1111 |
| * 1111 1011 but if you subtract one and invert you get the |
| * desired 111 1111 1111 1100 mask |
| * |
| * But ~(x - 1) == ~x + 1 == -x. Two's complement rocks! |
| */ |
| regs[reg] = (-size >> (15 - PAGE_SHIFT) & 0x0001FFFC) |
| | (base << PAGE_SHIFT) | (type + 1); |
| } |
| |
| /* |
| * The writeback rule is quite specific. See the manual. Its |
| * disable local interrupts, write back the cache, set the mtrr |
| */ |
| wbinvd(); |
| wrmsr(MSR_K6_UWCCR, regs[0], regs[1]); |
| } |
| |
| static int |
| amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type) |
| { |
| /* |
| * Apply the K6 block alignment and size rules |
| * In order |
| * o Uncached or gathering only |
| * o 128K or bigger block |
| * o Power of 2 block |
| * o base suitably aligned to the power |
| */ |
| if (type > MTRR_TYPE_WRCOMB || size < (1 << (17 - PAGE_SHIFT)) |
| || (size & ~(size - 1)) - size || (base & (size - 1))) |
| return -EINVAL; |
| return 0; |
| } |
| |
| const struct mtrr_ops amd_mtrr_ops = { |
| .var_regs = 2, |
| .set = amd_set_mtrr, |
| .get = amd_get_mtrr, |
| .get_free_region = generic_get_free_region, |
| .validate_add_page = amd_validate_add_page, |
| .have_wrcomb = positive_have_wrcomb, |
| }; |