| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * OMAP clockdomain support |
| * |
| * Copyright (C) 2013 Texas Instruments, Inc. |
| * |
| * Tero Kristo <t-kristo@ti.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/clk/ti.h> |
| |
| #include "clock.h" |
| |
| #undef pr_fmt |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| /** |
| * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw |
| * @hw: struct clk_hw * of the clock being enabled |
| * |
| * Increment the usecount of the clockdomain of the clock pointed to |
| * by @hw; if the usecount is 1, the clockdomain will be "enabled." |
| * Only needed for clocks that don't use omap2_dflt_clk_enable() as |
| * their enable function pointer. Passes along the return value of |
| * clkdm_clk_enable(), -EINVAL if @hw is not associated with a |
| * clockdomain, or 0 if clock framework-based clockdomain control is |
| * not implemented. |
| */ |
| int omap2_clkops_enable_clkdm(struct clk_hw *hw) |
| { |
| struct clk_hw_omap *clk; |
| int ret = 0; |
| |
| clk = to_clk_hw_omap(hw); |
| |
| if (unlikely(!clk->clkdm)) { |
| pr_err("%s: %s: no clkdm set ?!\n", __func__, |
| clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) { |
| pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n", |
| __func__, clk_hw_get_name(hw)); |
| return 0; |
| } |
| |
| ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk); |
| WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n", |
| __func__, clk_hw_get_name(hw), clk->clkdm_name, ret); |
| |
| return ret; |
| } |
| |
| /** |
| * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw |
| * @hw: struct clk_hw * of the clock being disabled |
| * |
| * Decrement the usecount of the clockdomain of the clock pointed to |
| * by @hw; if the usecount is 0, the clockdomain will be "disabled." |
| * Only needed for clocks that don't use omap2_dflt_clk_disable() as their |
| * disable function pointer. No return value. |
| */ |
| void omap2_clkops_disable_clkdm(struct clk_hw *hw) |
| { |
| struct clk_hw_omap *clk; |
| |
| clk = to_clk_hw_omap(hw); |
| |
| if (unlikely(!clk->clkdm)) { |
| pr_err("%s: %s: no clkdm set ?!\n", __func__, |
| clk_hw_get_name(hw)); |
| return; |
| } |
| |
| if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) { |
| pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n", |
| __func__, clk_hw_get_name(hw)); |
| return; |
| } |
| |
| ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk); |
| } |
| |
| /** |
| * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk |
| * @hw: Pointer to clk_hw_omap used to obtain OMAP clock struct ptr to use |
| * |
| * Convert a clockdomain name stored in a struct clk 'clk' into a |
| * clockdomain pointer, and save it into the struct clk. Intended to be |
| * called during clk_register(). Returns 0 on success, -EERROR otherwise. |
| */ |
| int omap2_init_clk_clkdm(struct clk_hw *hw) |
| { |
| struct clk_hw_omap *clk = to_clk_hw_omap(hw); |
| struct clockdomain *clkdm; |
| const char *clk_name; |
| |
| if (!clk->clkdm_name) |
| return 0; |
| |
| clk_name = __clk_get_name(hw->clk); |
| |
| clkdm = ti_clk_ll_ops->clkdm_lookup(clk->clkdm_name); |
| if (clkdm) { |
| pr_debug("clock: associated clk %s to clkdm %s\n", |
| clk_name, clk->clkdm_name); |
| clk->clkdm = clkdm; |
| } else { |
| pr_debug("clock: could not associate clk %s to clkdm %s\n", |
| clk_name, clk->clkdm_name); |
| } |
| |
| return 0; |
| } |
| |
| static void __init of_ti_clockdomain_setup(struct device_node *node) |
| { |
| struct clk *clk; |
| struct clk_hw *clk_hw; |
| const char *clkdm_name = ti_dt_clk_name(node); |
| int i; |
| unsigned int num_clks; |
| |
| num_clks = of_clk_get_parent_count(node); |
| |
| for (i = 0; i < num_clks; i++) { |
| clk = of_clk_get(node, i); |
| if (IS_ERR(clk)) { |
| pr_err("%s: Failed get %pOF' clock nr %d (%ld)\n", |
| __func__, node, i, PTR_ERR(clk)); |
| continue; |
| } |
| clk_hw = __clk_get_hw(clk); |
| if (!omap2_clk_is_hw_omap(clk_hw)) { |
| pr_warn("can't setup clkdm for basic clk %s\n", |
| __clk_get_name(clk)); |
| clk_put(clk); |
| continue; |
| } |
| to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name; |
| omap2_init_clk_clkdm(clk_hw); |
| clk_put(clk); |
| } |
| } |
| |
| static const struct of_device_id ti_clkdm_match_table[] __initconst = { |
| { .compatible = "ti,clockdomain" }, |
| { } |
| }; |
| |
| /** |
| * ti_dt_clockdomains_setup - setup device tree clockdomains |
| * |
| * Initializes clockdomain nodes for a SoC. This parses through all the |
| * nodes with compatible = "ti,clockdomain", and add the clockdomain |
| * info for all the clocks listed under these. This function shall be |
| * called after rest of the DT clock init has completed and all |
| * clock nodes have been registered. |
| */ |
| void __init ti_dt_clockdomains_setup(void) |
| { |
| struct device_node *np; |
| for_each_matching_node(np, ti_clkdm_match_table) { |
| of_ti_clockdomain_setup(np); |
| } |
| } |