| // SPDX-License-Identifier: GPL-2.0-only |
| |
| #include <linux/efi.h> |
| #include <linux/memblock.h> |
| #include <linux/spinlock.h> |
| #include <linux/crash_dump.h> |
| #include <asm/unaccepted_memory.h> |
| |
| /* Protects unaccepted memory bitmap and accepting_list */ |
| static DEFINE_SPINLOCK(unaccepted_memory_lock); |
| |
| struct accept_range { |
| struct list_head list; |
| unsigned long start; |
| unsigned long end; |
| }; |
| |
| static LIST_HEAD(accepting_list); |
| |
| /* |
| * accept_memory() -- Consult bitmap and accept the memory if needed. |
| * |
| * Only memory that is explicitly marked as unaccepted in the bitmap requires |
| * an action. All the remaining memory is implicitly accepted and doesn't need |
| * acceptance. |
| * |
| * No need to accept: |
| * - anything if the system has no unaccepted table; |
| * - memory that is below phys_base; |
| * - memory that is above the memory that addressable by the bitmap; |
| */ |
| void accept_memory(phys_addr_t start, phys_addr_t end) |
| { |
| struct efi_unaccepted_memory *unaccepted; |
| unsigned long range_start, range_end; |
| struct accept_range range, *entry; |
| unsigned long flags; |
| u64 unit_size; |
| |
| unaccepted = efi_get_unaccepted_table(); |
| if (!unaccepted) |
| return; |
| |
| unit_size = unaccepted->unit_size; |
| |
| /* |
| * Only care for the part of the range that is represented |
| * in the bitmap. |
| */ |
| if (start < unaccepted->phys_base) |
| start = unaccepted->phys_base; |
| if (end < unaccepted->phys_base) |
| return; |
| |
| /* Translate to offsets from the beginning of the bitmap */ |
| start -= unaccepted->phys_base; |
| end -= unaccepted->phys_base; |
| |
| /* |
| * load_unaligned_zeropad() can lead to unwanted loads across page |
| * boundaries. The unwanted loads are typically harmless. But, they |
| * might be made to totally unrelated or even unmapped memory. |
| * load_unaligned_zeropad() relies on exception fixup (#PF, #GP and now |
| * #VE) to recover from these unwanted loads. |
| * |
| * But, this approach does not work for unaccepted memory. For TDX, a |
| * load from unaccepted memory will not lead to a recoverable exception |
| * within the guest. The guest will exit to the VMM where the only |
| * recourse is to terminate the guest. |
| * |
| * There are two parts to fix this issue and comprehensively avoid |
| * access to unaccepted memory. Together these ensure that an extra |
| * "guard" page is accepted in addition to the memory that needs to be |
| * used: |
| * |
| * 1. Implicitly extend the range_contains_unaccepted_memory(start, end) |
| * checks up to end+unit_size if 'end' is aligned on a unit_size |
| * boundary. |
| * |
| * 2. Implicitly extend accept_memory(start, end) to end+unit_size if |
| * 'end' is aligned on a unit_size boundary. (immediately following |
| * this comment) |
| */ |
| if (!(end % unit_size)) |
| end += unit_size; |
| |
| /* Make sure not to overrun the bitmap */ |
| if (end > unaccepted->size * unit_size * BITS_PER_BYTE) |
| end = unaccepted->size * unit_size * BITS_PER_BYTE; |
| |
| range.start = start / unit_size; |
| range.end = DIV_ROUND_UP(end, unit_size); |
| retry: |
| spin_lock_irqsave(&unaccepted_memory_lock, flags); |
| |
| /* |
| * Check if anybody works on accepting the same range of the memory. |
| * |
| * The check is done with unit_size granularity. It is crucial to catch |
| * all accept requests to the same unit_size block, even if they don't |
| * overlap on physical address level. |
| */ |
| list_for_each_entry(entry, &accepting_list, list) { |
| if (entry->end <= range.start) |
| continue; |
| if (entry->start >= range.end) |
| continue; |
| |
| /* |
| * Somebody else accepting the range. Or at least part of it. |
| * |
| * Drop the lock and retry until it is complete. |
| */ |
| spin_unlock_irqrestore(&unaccepted_memory_lock, flags); |
| goto retry; |
| } |
| |
| /* |
| * Register that the range is about to be accepted. |
| * Make sure nobody else will accept it. |
| */ |
| list_add(&range.list, &accepting_list); |
| |
| range_start = range.start; |
| for_each_set_bitrange_from(range_start, range_end, unaccepted->bitmap, |
| range.end) { |
| unsigned long phys_start, phys_end; |
| unsigned long len = range_end - range_start; |
| |
| phys_start = range_start * unit_size + unaccepted->phys_base; |
| phys_end = range_end * unit_size + unaccepted->phys_base; |
| |
| /* |
| * Keep interrupts disabled until the accept operation is |
| * complete in order to prevent deadlocks. |
| * |
| * Enabling interrupts before calling arch_accept_memory() |
| * creates an opportunity for an interrupt handler to request |
| * acceptance for the same memory. The handler will continuously |
| * spin with interrupts disabled, preventing other task from |
| * making progress with the acceptance process. |
| */ |
| spin_unlock(&unaccepted_memory_lock); |
| |
| arch_accept_memory(phys_start, phys_end); |
| |
| spin_lock(&unaccepted_memory_lock); |
| bitmap_clear(unaccepted->bitmap, range_start, len); |
| } |
| |
| list_del(&range.list); |
| spin_unlock_irqrestore(&unaccepted_memory_lock, flags); |
| } |
| |
| bool range_contains_unaccepted_memory(phys_addr_t start, phys_addr_t end) |
| { |
| struct efi_unaccepted_memory *unaccepted; |
| unsigned long flags; |
| bool ret = false; |
| u64 unit_size; |
| |
| unaccepted = efi_get_unaccepted_table(); |
| if (!unaccepted) |
| return false; |
| |
| unit_size = unaccepted->unit_size; |
| |
| /* |
| * Only care for the part of the range that is represented |
| * in the bitmap. |
| */ |
| if (start < unaccepted->phys_base) |
| start = unaccepted->phys_base; |
| if (end < unaccepted->phys_base) |
| return false; |
| |
| /* Translate to offsets from the beginning of the bitmap */ |
| start -= unaccepted->phys_base; |
| end -= unaccepted->phys_base; |
| |
| /* |
| * Also consider the unaccepted state of the *next* page. See fix #1 in |
| * the comment on load_unaligned_zeropad() in accept_memory(). |
| */ |
| if (!(end % unit_size)) |
| end += unit_size; |
| |
| /* Make sure not to overrun the bitmap */ |
| if (end > unaccepted->size * unit_size * BITS_PER_BYTE) |
| end = unaccepted->size * unit_size * BITS_PER_BYTE; |
| |
| spin_lock_irqsave(&unaccepted_memory_lock, flags); |
| while (start < end) { |
| if (test_bit(start / unit_size, unaccepted->bitmap)) { |
| ret = true; |
| break; |
| } |
| |
| start += unit_size; |
| } |
| spin_unlock_irqrestore(&unaccepted_memory_lock, flags); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PROC_VMCORE |
| static bool unaccepted_memory_vmcore_pfn_is_ram(struct vmcore_cb *cb, |
| unsigned long pfn) |
| { |
| return !pfn_is_unaccepted_memory(pfn); |
| } |
| |
| static struct vmcore_cb vmcore_cb = { |
| .pfn_is_ram = unaccepted_memory_vmcore_pfn_is_ram, |
| }; |
| |
| static int __init unaccepted_memory_init_kdump(void) |
| { |
| register_vmcore_cb(&vmcore_cb); |
| return 0; |
| } |
| core_initcall(unaccepted_memory_init_kdump); |
| #endif /* CONFIG_PROC_VMCORE */ |