| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Hardware monitoring driver for Renesas Digital Multiphase Voltage Regulators |
| * |
| * Copyright (c) 2017 Google Inc |
| * Copyright (c) 2020 Renesas Electronics America |
| * |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/sysfs.h> |
| |
| #include "pmbus.h" |
| |
| #define ISL68137_VOUT_AVS 0x30 |
| #define RAA_DMPVR2_READ_VMON 0xc8 |
| |
| enum chips { |
| isl68137, |
| isl68220, |
| isl68221, |
| isl68222, |
| isl68223, |
| isl68224, |
| isl68225, |
| isl68226, |
| isl68227, |
| isl68229, |
| isl68233, |
| isl68239, |
| isl69222, |
| isl69223, |
| isl69224, |
| isl69225, |
| isl69227, |
| isl69228, |
| isl69234, |
| isl69236, |
| isl69239, |
| isl69242, |
| isl69243, |
| isl69247, |
| isl69248, |
| isl69254, |
| isl69255, |
| isl69256, |
| isl69259, |
| isl69260, |
| isl69268, |
| isl69269, |
| isl69298, |
| raa228000, |
| raa228004, |
| raa228006, |
| raa228228, |
| raa229001, |
| raa229004, |
| }; |
| |
| enum variants { |
| raa_dmpvr1_2rail, |
| raa_dmpvr2_1rail, |
| raa_dmpvr2_2rail, |
| raa_dmpvr2_2rail_nontc, |
| raa_dmpvr2_3rail, |
| raa_dmpvr2_hv, |
| }; |
| |
| static const struct i2c_device_id raa_dmpvr_id[]; |
| |
| static ssize_t isl68137_avs_enable_show_page(struct i2c_client *client, |
| int page, |
| char *buf) |
| { |
| int val = pmbus_read_byte_data(client, page, PMBUS_OPERATION); |
| |
| return sprintf(buf, "%d\n", |
| (val & ISL68137_VOUT_AVS) == ISL68137_VOUT_AVS ? 1 : 0); |
| } |
| |
| static ssize_t isl68137_avs_enable_store_page(struct i2c_client *client, |
| int page, |
| const char *buf, size_t count) |
| { |
| int rc, op_val; |
| bool result; |
| |
| rc = kstrtobool(buf, &result); |
| if (rc) |
| return rc; |
| |
| op_val = result ? ISL68137_VOUT_AVS : 0; |
| |
| /* |
| * Writes to VOUT setpoint over AVSBus will persist after the VRM is |
| * switched to PMBus control. Switching back to AVSBus control |
| * restores this persisted setpoint rather than re-initializing to |
| * PMBus VOUT_COMMAND. Writing VOUT_COMMAND first over PMBus before |
| * enabling AVS control is the workaround. |
| */ |
| if (op_val == ISL68137_VOUT_AVS) { |
| rc = pmbus_read_word_data(client, page, 0xff, |
| PMBUS_VOUT_COMMAND); |
| if (rc < 0) |
| return rc; |
| |
| rc = pmbus_write_word_data(client, page, PMBUS_VOUT_COMMAND, |
| rc); |
| if (rc < 0) |
| return rc; |
| } |
| |
| rc = pmbus_update_byte_data(client, page, PMBUS_OPERATION, |
| ISL68137_VOUT_AVS, op_val); |
| |
| return (rc < 0) ? rc : count; |
| } |
| |
| static ssize_t isl68137_avs_enable_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev->parent); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| |
| return isl68137_avs_enable_show_page(client, attr->index, buf); |
| } |
| |
| static ssize_t isl68137_avs_enable_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev->parent); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| |
| return isl68137_avs_enable_store_page(client, attr->index, buf, count); |
| } |
| |
| static SENSOR_DEVICE_ATTR_RW(avs0_enable, isl68137_avs_enable, 0); |
| static SENSOR_DEVICE_ATTR_RW(avs1_enable, isl68137_avs_enable, 1); |
| |
| static struct attribute *enable_attrs[] = { |
| &sensor_dev_attr_avs0_enable.dev_attr.attr, |
| &sensor_dev_attr_avs1_enable.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group enable_group = { |
| .attrs = enable_attrs, |
| }; |
| |
| static const struct attribute_group *isl68137_attribute_groups[] = { |
| &enable_group, |
| NULL, |
| }; |
| |
| static int raa_dmpvr2_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_VMON: |
| ret = pmbus_read_word_data(client, page, phase, |
| RAA_DMPVR2_READ_VMON); |
| break; |
| default: |
| ret = -ENODATA; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static struct pmbus_driver_info raa_dmpvr_info = { |
| .pages = 3, |
| .format[PSC_VOLTAGE_IN] = direct, |
| .format[PSC_VOLTAGE_OUT] = direct, |
| .format[PSC_CURRENT_IN] = direct, |
| .format[PSC_CURRENT_OUT] = direct, |
| .format[PSC_POWER] = direct, |
| .format[PSC_TEMPERATURE] = direct, |
| .m[PSC_VOLTAGE_IN] = 1, |
| .b[PSC_VOLTAGE_IN] = 0, |
| .R[PSC_VOLTAGE_IN] = 2, |
| .m[PSC_VOLTAGE_OUT] = 1, |
| .b[PSC_VOLTAGE_OUT] = 0, |
| .R[PSC_VOLTAGE_OUT] = 3, |
| .m[PSC_CURRENT_IN] = 1, |
| .b[PSC_CURRENT_IN] = 0, |
| .R[PSC_CURRENT_IN] = 2, |
| .m[PSC_CURRENT_OUT] = 1, |
| .b[PSC_CURRENT_OUT] = 0, |
| .R[PSC_CURRENT_OUT] = 1, |
| .m[PSC_POWER] = 1, |
| .b[PSC_POWER] = 0, |
| .R[PSC_POWER] = 0, |
| .m[PSC_TEMPERATURE] = 1, |
| .b[PSC_TEMPERATURE] = 0, |
| .R[PSC_TEMPERATURE] = 0, |
| .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
| | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
| | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_VMON, |
| .func[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT |
| | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT, |
| .func[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT |
| | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT, |
| }; |
| |
| static int isl68137_probe(struct i2c_client *client) |
| { |
| struct pmbus_driver_info *info; |
| |
| info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| memcpy(info, &raa_dmpvr_info, sizeof(*info)); |
| |
| switch (i2c_match_id(raa_dmpvr_id, client)->driver_data) { |
| case raa_dmpvr1_2rail: |
| info->pages = 2; |
| info->R[PSC_VOLTAGE_IN] = 3; |
| info->func[0] &= ~PMBUS_HAVE_VMON; |
| info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT; |
| info->groups = isl68137_attribute_groups; |
| break; |
| case raa_dmpvr2_1rail: |
| info->pages = 1; |
| info->read_word_data = raa_dmpvr2_read_word_data; |
| break; |
| case raa_dmpvr2_2rail_nontc: |
| info->func[0] &= ~PMBUS_HAVE_TEMP3; |
| info->func[1] &= ~PMBUS_HAVE_TEMP3; |
| fallthrough; |
| case raa_dmpvr2_2rail: |
| info->pages = 2; |
| info->read_word_data = raa_dmpvr2_read_word_data; |
| break; |
| case raa_dmpvr2_3rail: |
| info->read_word_data = raa_dmpvr2_read_word_data; |
| break; |
| case raa_dmpvr2_hv: |
| info->pages = 1; |
| info->R[PSC_VOLTAGE_IN] = 1; |
| info->m[PSC_VOLTAGE_OUT] = 2; |
| info->R[PSC_VOLTAGE_OUT] = 2; |
| info->m[PSC_CURRENT_IN] = 2; |
| info->m[PSC_POWER] = 2; |
| info->R[PSC_POWER] = -1; |
| info->read_word_data = raa_dmpvr2_read_word_data; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| return pmbus_do_probe(client, info); |
| } |
| |
| static const struct i2c_device_id raa_dmpvr_id[] = { |
| {"isl68137", raa_dmpvr1_2rail}, |
| {"isl68220", raa_dmpvr2_2rail}, |
| {"isl68221", raa_dmpvr2_3rail}, |
| {"isl68222", raa_dmpvr2_2rail}, |
| {"isl68223", raa_dmpvr2_2rail}, |
| {"isl68224", raa_dmpvr2_3rail}, |
| {"isl68225", raa_dmpvr2_2rail}, |
| {"isl68226", raa_dmpvr2_3rail}, |
| {"isl68227", raa_dmpvr2_1rail}, |
| {"isl68229", raa_dmpvr2_3rail}, |
| {"isl68233", raa_dmpvr2_2rail}, |
| {"isl68239", raa_dmpvr2_3rail}, |
| |
| {"isl69222", raa_dmpvr2_2rail}, |
| {"isl69223", raa_dmpvr2_3rail}, |
| {"isl69224", raa_dmpvr2_2rail}, |
| {"isl69225", raa_dmpvr2_2rail}, |
| {"isl69227", raa_dmpvr2_3rail}, |
| {"isl69228", raa_dmpvr2_3rail}, |
| {"isl69234", raa_dmpvr2_2rail}, |
| {"isl69236", raa_dmpvr2_2rail}, |
| {"isl69239", raa_dmpvr2_3rail}, |
| {"isl69242", raa_dmpvr2_2rail}, |
| {"isl69243", raa_dmpvr2_1rail}, |
| {"isl69247", raa_dmpvr2_2rail}, |
| {"isl69248", raa_dmpvr2_2rail}, |
| {"isl69254", raa_dmpvr2_2rail}, |
| {"isl69255", raa_dmpvr2_2rail}, |
| {"isl69256", raa_dmpvr2_2rail}, |
| {"isl69259", raa_dmpvr2_2rail}, |
| {"isl69260", raa_dmpvr2_2rail}, |
| {"isl69268", raa_dmpvr2_2rail}, |
| {"isl69269", raa_dmpvr2_3rail}, |
| {"isl69298", raa_dmpvr2_2rail}, |
| |
| {"raa228000", raa_dmpvr2_hv}, |
| {"raa228004", raa_dmpvr2_hv}, |
| {"raa228006", raa_dmpvr2_hv}, |
| {"raa228228", raa_dmpvr2_2rail_nontc}, |
| {"raa229001", raa_dmpvr2_2rail}, |
| {"raa229004", raa_dmpvr2_2rail}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, raa_dmpvr_id); |
| |
| /* This is the driver that will be inserted */ |
| static struct i2c_driver isl68137_driver = { |
| .driver = { |
| .name = "isl68137", |
| }, |
| .probe = isl68137_probe, |
| .id_table = raa_dmpvr_id, |
| }; |
| |
| module_i2c_driver(isl68137_driver); |
| |
| MODULE_AUTHOR("Maxim Sloyko <maxims@google.com>"); |
| MODULE_DESCRIPTION("PMBus driver for Renesas digital multiphase voltage regulators"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(PMBUS); |