| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for Novatek NT11205 i2c touchscreen controller as found |
| * on the Acer Iconia One 7 B1-750 tablet. |
| * |
| * Copyright (c) 2023 Hans de Goede <hdegoede@redhat.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/interrupt.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/input/mt.h> |
| #include <linux/input/touchscreen.h> |
| #include <linux/module.h> |
| |
| #include <asm/unaligned.h> |
| |
| #define NVT_TS_TOUCH_START 0x00 |
| #define NVT_TS_TOUCH_SIZE 6 |
| |
| #define NVT_TS_PARAMETERS_START 0x78 |
| /* These are offsets from NVT_TS_PARAMETERS_START */ |
| #define NVT_TS_PARAMS_WIDTH 0x04 |
| #define NVT_TS_PARAMS_HEIGHT 0x06 |
| #define NVT_TS_PARAMS_MAX_TOUCH 0x09 |
| #define NVT_TS_PARAMS_MAX_BUTTONS 0x0a |
| #define NVT_TS_PARAMS_IRQ_TYPE 0x0b |
| #define NVT_TS_PARAMS_WAKE_TYPE 0x0c |
| #define NVT_TS_PARAMS_CHIP_ID 0x0e |
| #define NVT_TS_PARAMS_SIZE 0x0f |
| |
| #define NVT_TS_SUPPORTED_WAKE_TYPE 0x05 |
| #define NVT_TS_SUPPORTED_CHIP_ID 0x05 |
| |
| #define NVT_TS_MAX_TOUCHES 10 |
| #define NVT_TS_MAX_SIZE 4096 |
| |
| #define NVT_TS_TOUCH_INVALID 0xff |
| #define NVT_TS_TOUCH_SLOT_SHIFT 3 |
| #define NVT_TS_TOUCH_TYPE_MASK GENMASK(2, 0) |
| #define NVT_TS_TOUCH_NEW 1 |
| #define NVT_TS_TOUCH_UPDATE 2 |
| #define NVT_TS_TOUCH_RELEASE 3 |
| |
| static const int nvt_ts_irq_type[4] = { |
| IRQF_TRIGGER_RISING, |
| IRQF_TRIGGER_FALLING, |
| IRQF_TRIGGER_LOW, |
| IRQF_TRIGGER_HIGH |
| }; |
| |
| struct nvt_ts_data { |
| struct i2c_client *client; |
| struct input_dev *input; |
| struct gpio_desc *reset_gpio; |
| struct touchscreen_properties prop; |
| int max_touches; |
| u8 buf[NVT_TS_TOUCH_SIZE * NVT_TS_MAX_TOUCHES]; |
| }; |
| |
| static int nvt_ts_read_data(struct i2c_client *client, u8 reg, u8 *data, int count) |
| { |
| struct i2c_msg msg[2] = { |
| { |
| .addr = client->addr, |
| .len = 1, |
| .buf = ®, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = count, |
| .buf = data, |
| } |
| }; |
| int ret; |
| |
| ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); |
| if (ret != ARRAY_SIZE(msg)) { |
| dev_err(&client->dev, "Error reading from 0x%02x: %d\n", reg, ret); |
| return (ret < 0) ? ret : -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t nvt_ts_irq(int irq, void *dev_id) |
| { |
| struct nvt_ts_data *data = dev_id; |
| struct device *dev = &data->client->dev; |
| int i, error, slot, x, y; |
| bool active; |
| u8 *touch; |
| |
| error = nvt_ts_read_data(data->client, NVT_TS_TOUCH_START, data->buf, |
| data->max_touches * NVT_TS_TOUCH_SIZE); |
| if (error) |
| return IRQ_HANDLED; |
| |
| for (i = 0; i < data->max_touches; i++) { |
| touch = &data->buf[i * NVT_TS_TOUCH_SIZE]; |
| |
| if (touch[0] == NVT_TS_TOUCH_INVALID) |
| continue; |
| |
| slot = touch[0] >> NVT_TS_TOUCH_SLOT_SHIFT; |
| if (slot < 1 || slot > data->max_touches) { |
| dev_warn(dev, "slot %d out of range, ignoring\n", slot); |
| continue; |
| } |
| |
| switch (touch[0] & NVT_TS_TOUCH_TYPE_MASK) { |
| case NVT_TS_TOUCH_NEW: |
| case NVT_TS_TOUCH_UPDATE: |
| active = true; |
| break; |
| case NVT_TS_TOUCH_RELEASE: |
| active = false; |
| break; |
| default: |
| dev_warn(dev, "slot %d unknown state %d\n", slot, touch[0] & 7); |
| continue; |
| } |
| |
| slot--; |
| x = (touch[1] << 4) | (touch[3] >> 4); |
| y = (touch[2] << 4) | (touch[3] & 0x0f); |
| |
| input_mt_slot(data->input, slot); |
| input_mt_report_slot_state(data->input, MT_TOOL_FINGER, active); |
| touchscreen_report_pos(data->input, &data->prop, x, y, true); |
| } |
| |
| input_mt_sync_frame(data->input); |
| input_sync(data->input); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int nvt_ts_start(struct input_dev *dev) |
| { |
| struct nvt_ts_data *data = input_get_drvdata(dev); |
| |
| enable_irq(data->client->irq); |
| gpiod_set_value_cansleep(data->reset_gpio, 0); |
| |
| return 0; |
| } |
| |
| static void nvt_ts_stop(struct input_dev *dev) |
| { |
| struct nvt_ts_data *data = input_get_drvdata(dev); |
| |
| disable_irq(data->client->irq); |
| gpiod_set_value_cansleep(data->reset_gpio, 1); |
| } |
| |
| static int nvt_ts_suspend(struct device *dev) |
| { |
| struct nvt_ts_data *data = i2c_get_clientdata(to_i2c_client(dev)); |
| |
| mutex_lock(&data->input->mutex); |
| if (input_device_enabled(data->input)) |
| nvt_ts_stop(data->input); |
| mutex_unlock(&data->input->mutex); |
| |
| return 0; |
| } |
| |
| static int nvt_ts_resume(struct device *dev) |
| { |
| struct nvt_ts_data *data = i2c_get_clientdata(to_i2c_client(dev)); |
| |
| mutex_lock(&data->input->mutex); |
| if (input_device_enabled(data->input)) |
| nvt_ts_start(data->input); |
| mutex_unlock(&data->input->mutex); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(nvt_ts_pm_ops, nvt_ts_suspend, nvt_ts_resume); |
| |
| static int nvt_ts_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| int error, width, height, irq_type; |
| struct nvt_ts_data *data; |
| struct input_dev *input; |
| |
| if (!client->irq) { |
| dev_err(dev, "Error no irq specified\n"); |
| return -EINVAL; |
| } |
| |
| data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->client = client; |
| i2c_set_clientdata(client, data); |
| |
| data->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); |
| error = PTR_ERR_OR_ZERO(data->reset_gpio); |
| if (error) { |
| dev_err(dev, "failed to request reset GPIO: %d\n", error); |
| return error; |
| } |
| |
| /* Wait for controller to come out of reset before params read */ |
| msleep(100); |
| error = nvt_ts_read_data(data->client, NVT_TS_PARAMETERS_START, |
| data->buf, NVT_TS_PARAMS_SIZE); |
| gpiod_set_value_cansleep(data->reset_gpio, 1); /* Put back in reset */ |
| if (error) |
| return error; |
| |
| width = get_unaligned_be16(&data->buf[NVT_TS_PARAMS_WIDTH]); |
| height = get_unaligned_be16(&data->buf[NVT_TS_PARAMS_HEIGHT]); |
| data->max_touches = data->buf[NVT_TS_PARAMS_MAX_TOUCH]; |
| irq_type = data->buf[NVT_TS_PARAMS_IRQ_TYPE]; |
| |
| if (width > NVT_TS_MAX_SIZE || height >= NVT_TS_MAX_SIZE || |
| data->max_touches > NVT_TS_MAX_TOUCHES || |
| irq_type >= ARRAY_SIZE(nvt_ts_irq_type) || |
| data->buf[NVT_TS_PARAMS_WAKE_TYPE] != NVT_TS_SUPPORTED_WAKE_TYPE || |
| data->buf[NVT_TS_PARAMS_CHIP_ID] != NVT_TS_SUPPORTED_CHIP_ID) { |
| dev_err(dev, "Unsupported touchscreen parameters: %*ph\n", |
| NVT_TS_PARAMS_SIZE, data->buf); |
| return -EIO; |
| } |
| |
| dev_dbg(dev, "Detected %dx%d touchscreen with %d max touches\n", |
| width, height, data->max_touches); |
| |
| if (data->buf[NVT_TS_PARAMS_MAX_BUTTONS]) |
| dev_warn(dev, "Touchscreen buttons are not supported\n"); |
| |
| input = devm_input_allocate_device(dev); |
| if (!input) |
| return -ENOMEM; |
| |
| input->name = client->name; |
| input->id.bustype = BUS_I2C; |
| input->open = nvt_ts_start; |
| input->close = nvt_ts_stop; |
| |
| input_set_abs_params(input, ABS_MT_POSITION_X, 0, width - 1, 0, 0); |
| input_set_abs_params(input, ABS_MT_POSITION_Y, 0, height - 1, 0, 0); |
| touchscreen_parse_properties(input, true, &data->prop); |
| |
| error = input_mt_init_slots(input, data->max_touches, |
| INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); |
| if (error) |
| return error; |
| |
| data->input = input; |
| input_set_drvdata(input, data); |
| |
| error = devm_request_threaded_irq(dev, client->irq, NULL, nvt_ts_irq, |
| IRQF_ONESHOT | IRQF_NO_AUTOEN | |
| nvt_ts_irq_type[irq_type], |
| client->name, data); |
| if (error) { |
| dev_err(dev, "failed to request irq: %d\n", error); |
| return error; |
| } |
| |
| error = input_register_device(input); |
| if (error) { |
| dev_err(dev, "failed to register input device: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id nvt_ts_i2c_id[] = { |
| { "NVT-ts" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, nvt_ts_i2c_id); |
| |
| static struct i2c_driver nvt_ts_driver = { |
| .driver = { |
| .name = "novatek-nvt-ts", |
| .pm = pm_sleep_ptr(&nvt_ts_pm_ops), |
| }, |
| .probe = nvt_ts_probe, |
| .id_table = nvt_ts_i2c_id, |
| }; |
| |
| module_i2c_driver(nvt_ts_driver); |
| |
| MODULE_DESCRIPTION("Novatek NT11205 touchscreen driver"); |
| MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); |
| MODULE_LICENSE("GPL"); |