| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Lochnagar I2C bus interface |
| * |
| * Copyright (c) 2012-2018 Cirrus Logic, Inc. and |
| * Cirrus Logic International Semiconductor Ltd. |
| * |
| * Author: Charles Keepax <ckeepax@opensource.cirrus.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/lockdep.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/mutex.h> |
| #include <linux/of_platform.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/mfd/lochnagar.h> |
| #include <linux/mfd/lochnagar1_regs.h> |
| #include <linux/mfd/lochnagar2_regs.h> |
| |
| #define LOCHNAGAR_BOOT_RETRIES 10 |
| #define LOCHNAGAR_BOOT_DELAY_MS 350 |
| |
| #define LOCHNAGAR_CONFIG_POLL_US 10000 |
| |
| static bool lochnagar1_readable_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case LOCHNAGAR_SOFTWARE_RESET: |
| case LOCHNAGAR_FIRMWARE_ID1...LOCHNAGAR_FIRMWARE_ID2: |
| case LOCHNAGAR1_CDC_AIF1_SEL...LOCHNAGAR1_CDC_AIF3_SEL: |
| case LOCHNAGAR1_CDC_MCLK1_SEL...LOCHNAGAR1_CDC_MCLK2_SEL: |
| case LOCHNAGAR1_CDC_AIF_CTRL1...LOCHNAGAR1_CDC_AIF_CTRL2: |
| case LOCHNAGAR1_EXT_AIF_CTRL: |
| case LOCHNAGAR1_DSP_AIF1_SEL...LOCHNAGAR1_DSP_AIF2_SEL: |
| case LOCHNAGAR1_DSP_CLKIN_SEL: |
| case LOCHNAGAR1_DSP_AIF: |
| case LOCHNAGAR1_GF_AIF1...LOCHNAGAR1_GF_AIF2: |
| case LOCHNAGAR1_PSIA_AIF: |
| case LOCHNAGAR1_PSIA1_SEL...LOCHNAGAR1_PSIA2_SEL: |
| case LOCHNAGAR1_SPDIF_AIF_SEL: |
| case LOCHNAGAR1_GF_AIF3_SEL...LOCHNAGAR1_GF_AIF4_SEL: |
| case LOCHNAGAR1_GF_CLKOUT1_SEL: |
| case LOCHNAGAR1_GF_AIF1_SEL...LOCHNAGAR1_GF_AIF2_SEL: |
| case LOCHNAGAR1_GF_GPIO2...LOCHNAGAR1_GF_GPIO7: |
| case LOCHNAGAR1_RST: |
| case LOCHNAGAR1_LED1...LOCHNAGAR1_LED2: |
| case LOCHNAGAR1_I2C_CTRL: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config lochnagar1_i2c_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .reg_format_endian = REGMAP_ENDIAN_BIG, |
| .val_format_endian = REGMAP_ENDIAN_BIG, |
| |
| .max_register = 0x50, |
| .readable_reg = lochnagar1_readable_register, |
| |
| .use_single_read = true, |
| .use_single_write = true, |
| |
| .cache_type = REGCACHE_MAPLE, |
| }; |
| |
| static const struct reg_sequence lochnagar1_patch[] = { |
| { 0x40, 0x0083 }, |
| { 0x47, 0x0018 }, |
| { 0x50, 0x0000 }, |
| }; |
| |
| static bool lochnagar2_readable_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case LOCHNAGAR_SOFTWARE_RESET: |
| case LOCHNAGAR_FIRMWARE_ID1...LOCHNAGAR_FIRMWARE_ID2: |
| case LOCHNAGAR2_CDC_AIF1_CTRL...LOCHNAGAR2_CDC_AIF3_CTRL: |
| case LOCHNAGAR2_DSP_AIF1_CTRL...LOCHNAGAR2_DSP_AIF2_CTRL: |
| case LOCHNAGAR2_PSIA1_CTRL...LOCHNAGAR2_PSIA2_CTRL: |
| case LOCHNAGAR2_GF_AIF3_CTRL...LOCHNAGAR2_GF_AIF4_CTRL: |
| case LOCHNAGAR2_GF_AIF1_CTRL...LOCHNAGAR2_GF_AIF2_CTRL: |
| case LOCHNAGAR2_SPDIF_AIF_CTRL: |
| case LOCHNAGAR2_USB_AIF1_CTRL...LOCHNAGAR2_USB_AIF2_CTRL: |
| case LOCHNAGAR2_ADAT_AIF_CTRL: |
| case LOCHNAGAR2_CDC_MCLK1_CTRL...LOCHNAGAR2_CDC_MCLK2_CTRL: |
| case LOCHNAGAR2_DSP_CLKIN_CTRL: |
| case LOCHNAGAR2_PSIA1_MCLK_CTRL...LOCHNAGAR2_PSIA2_MCLK_CTRL: |
| case LOCHNAGAR2_SPDIF_MCLK_CTRL: |
| case LOCHNAGAR2_GF_CLKOUT1_CTRL...LOCHNAGAR2_GF_CLKOUT2_CTRL: |
| case LOCHNAGAR2_ADAT_MCLK_CTRL: |
| case LOCHNAGAR2_SOUNDCARD_MCLK_CTRL: |
| case LOCHNAGAR2_GPIO_FPGA_GPIO1...LOCHNAGAR2_GPIO_FPGA_GPIO6: |
| case LOCHNAGAR2_GPIO_CDC_GPIO1...LOCHNAGAR2_GPIO_CDC_GPIO8: |
| case LOCHNAGAR2_GPIO_DSP_GPIO1...LOCHNAGAR2_GPIO_DSP_GPIO6: |
| case LOCHNAGAR2_GPIO_GF_GPIO2...LOCHNAGAR2_GPIO_GF_GPIO7: |
| case LOCHNAGAR2_GPIO_CDC_AIF1_BCLK...LOCHNAGAR2_GPIO_CDC_AIF3_TXDAT: |
| case LOCHNAGAR2_GPIO_DSP_AIF1_BCLK...LOCHNAGAR2_GPIO_DSP_AIF2_TXDAT: |
| case LOCHNAGAR2_GPIO_PSIA1_BCLK...LOCHNAGAR2_GPIO_PSIA2_TXDAT: |
| case LOCHNAGAR2_GPIO_GF_AIF3_BCLK...LOCHNAGAR2_GPIO_GF_AIF4_TXDAT: |
| case LOCHNAGAR2_GPIO_GF_AIF1_BCLK...LOCHNAGAR2_GPIO_GF_AIF2_TXDAT: |
| case LOCHNAGAR2_GPIO_DSP_UART1_RX...LOCHNAGAR2_GPIO_DSP_UART2_TX: |
| case LOCHNAGAR2_GPIO_GF_UART2_RX...LOCHNAGAR2_GPIO_GF_UART2_TX: |
| case LOCHNAGAR2_GPIO_USB_UART_RX: |
| case LOCHNAGAR2_GPIO_CDC_PDMCLK1...LOCHNAGAR2_GPIO_CDC_PDMDAT2: |
| case LOCHNAGAR2_GPIO_CDC_DMICCLK1...LOCHNAGAR2_GPIO_CDC_DMICDAT4: |
| case LOCHNAGAR2_GPIO_DSP_DMICCLK1...LOCHNAGAR2_GPIO_DSP_DMICDAT2: |
| case LOCHNAGAR2_GPIO_I2C2_SCL...LOCHNAGAR2_GPIO_I2C4_SDA: |
| case LOCHNAGAR2_GPIO_DSP_STANDBY: |
| case LOCHNAGAR2_GPIO_CDC_MCLK1...LOCHNAGAR2_GPIO_CDC_MCLK2: |
| case LOCHNAGAR2_GPIO_DSP_CLKIN: |
| case LOCHNAGAR2_GPIO_PSIA1_MCLK...LOCHNAGAR2_GPIO_PSIA2_MCLK: |
| case LOCHNAGAR2_GPIO_GF_GPIO1...LOCHNAGAR2_GPIO_GF_GPIO5: |
| case LOCHNAGAR2_GPIO_DSP_GPIO20: |
| case LOCHNAGAR2_GPIO_CHANNEL1...LOCHNAGAR2_GPIO_CHANNEL16: |
| case LOCHNAGAR2_MINICARD_RESETS: |
| case LOCHNAGAR2_ANALOGUE_PATH_CTRL1...LOCHNAGAR2_ANALOGUE_PATH_CTRL2: |
| case LOCHNAGAR2_COMMS_CTRL4: |
| case LOCHNAGAR2_SPDIF_CTRL: |
| case LOCHNAGAR2_IMON_CTRL1...LOCHNAGAR2_IMON_CTRL4: |
| case LOCHNAGAR2_IMON_DATA1...LOCHNAGAR2_IMON_DATA2: |
| case LOCHNAGAR2_POWER_CTRL: |
| case LOCHNAGAR2_MICVDD_CTRL1: |
| case LOCHNAGAR2_MICVDD_CTRL2: |
| case LOCHNAGAR2_VDDCORE_CDC_CTRL1: |
| case LOCHNAGAR2_VDDCORE_CDC_CTRL2: |
| case LOCHNAGAR2_SOUNDCARD_AIF_CTRL: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool lochnagar2_volatile_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case LOCHNAGAR2_GPIO_CHANNEL1...LOCHNAGAR2_GPIO_CHANNEL16: |
| case LOCHNAGAR2_ANALOGUE_PATH_CTRL1: |
| case LOCHNAGAR2_IMON_CTRL3...LOCHNAGAR2_IMON_CTRL4: |
| case LOCHNAGAR2_IMON_DATA1...LOCHNAGAR2_IMON_DATA2: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config lochnagar2_i2c_regmap = { |
| .reg_bits = 16, |
| .val_bits = 16, |
| .reg_format_endian = REGMAP_ENDIAN_BIG, |
| .val_format_endian = REGMAP_ENDIAN_BIG, |
| |
| .max_register = 0x1F1F, |
| .readable_reg = lochnagar2_readable_register, |
| .volatile_reg = lochnagar2_volatile_register, |
| |
| .cache_type = REGCACHE_MAPLE, |
| }; |
| |
| static const struct reg_sequence lochnagar2_patch[] = { |
| { 0x00EE, 0x0000 }, |
| }; |
| |
| struct lochnagar_config { |
| int id; |
| const char * const name; |
| enum lochnagar_type type; |
| const struct regmap_config *regmap; |
| const struct reg_sequence *patch; |
| int npatch; |
| }; |
| |
| static struct lochnagar_config lochnagar_configs[] = { |
| { |
| .id = 0x50, |
| .name = "lochnagar1", |
| .type = LOCHNAGAR1, |
| .regmap = &lochnagar1_i2c_regmap, |
| .patch = lochnagar1_patch, |
| .npatch = ARRAY_SIZE(lochnagar1_patch), |
| }, |
| { |
| .id = 0xCB58, |
| .name = "lochnagar2", |
| .type = LOCHNAGAR2, |
| .regmap = &lochnagar2_i2c_regmap, |
| .patch = lochnagar2_patch, |
| .npatch = ARRAY_SIZE(lochnagar2_patch), |
| }, |
| }; |
| |
| static const struct of_device_id lochnagar_of_match[] = { |
| { .compatible = "cirrus,lochnagar1", .data = &lochnagar_configs[0] }, |
| { .compatible = "cirrus,lochnagar2", .data = &lochnagar_configs[1] }, |
| {}, |
| }; |
| |
| static int lochnagar_wait_for_boot(struct regmap *regmap, unsigned int *id) |
| { |
| int i, ret; |
| |
| for (i = 0; i < LOCHNAGAR_BOOT_RETRIES; ++i) { |
| msleep(LOCHNAGAR_BOOT_DELAY_MS); |
| |
| /* The reset register will return the device ID when read */ |
| ret = regmap_read(regmap, LOCHNAGAR_SOFTWARE_RESET, id); |
| if (!ret) |
| return ret; |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| /** |
| * lochnagar_update_config - Synchronise the boards analogue configuration to |
| * the hardware. |
| * |
| * @lochnagar: A pointer to the primary core data structure. |
| * |
| * Return: Zero on success or an appropriate negative error code on failure. |
| */ |
| int lochnagar_update_config(struct lochnagar *lochnagar) |
| { |
| struct regmap *regmap = lochnagar->regmap; |
| unsigned int done = LOCHNAGAR2_ANALOGUE_PATH_UPDATE_STS_MASK; |
| int timeout_ms = LOCHNAGAR_BOOT_DELAY_MS * LOCHNAGAR_BOOT_RETRIES; |
| unsigned int val = 0; |
| int ret; |
| |
| lockdep_assert_held(&lochnagar->analogue_config_lock); |
| |
| if (lochnagar->type != LOCHNAGAR2) |
| return 0; |
| |
| /* |
| * Toggle the ANALOGUE_PATH_UPDATE bit and wait for the device to |
| * acknowledge that any outstanding changes to the analogue |
| * configuration have been applied. |
| */ |
| ret = regmap_write(regmap, LOCHNAGAR2_ANALOGUE_PATH_CTRL1, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_write(regmap, LOCHNAGAR2_ANALOGUE_PATH_CTRL1, |
| LOCHNAGAR2_ANALOGUE_PATH_UPDATE_MASK); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read_poll_timeout(regmap, |
| LOCHNAGAR2_ANALOGUE_PATH_CTRL1, val, |
| (val & done), LOCHNAGAR_CONFIG_POLL_US, |
| timeout_ms * 1000); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(lochnagar_update_config); |
| |
| static int lochnagar_i2c_probe(struct i2c_client *i2c) |
| { |
| struct device *dev = &i2c->dev; |
| const struct lochnagar_config *config = NULL; |
| struct lochnagar *lochnagar; |
| struct gpio_desc *reset, *present; |
| unsigned int val; |
| unsigned int firmwareid; |
| unsigned int devid, rev; |
| int ret; |
| |
| lochnagar = devm_kzalloc(dev, sizeof(*lochnagar), GFP_KERNEL); |
| if (!lochnagar) |
| return -ENOMEM; |
| |
| config = i2c_get_match_data(i2c); |
| |
| lochnagar->dev = dev; |
| mutex_init(&lochnagar->analogue_config_lock); |
| |
| dev_set_drvdata(dev, lochnagar); |
| |
| reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(reset)) { |
| ret = PTR_ERR(reset); |
| dev_err(dev, "Failed to get reset GPIO: %d\n", ret); |
| return ret; |
| } |
| |
| present = devm_gpiod_get_optional(dev, "present", GPIOD_OUT_HIGH); |
| if (IS_ERR(present)) { |
| ret = PTR_ERR(present); |
| dev_err(dev, "Failed to get present GPIO: %d\n", ret); |
| return ret; |
| } |
| |
| /* Leave the Lochnagar in reset for a reasonable amount of time */ |
| msleep(20); |
| |
| /* Bring Lochnagar out of reset */ |
| gpiod_set_value_cansleep(reset, 1); |
| |
| /* Identify Lochnagar */ |
| lochnagar->type = config->type; |
| |
| lochnagar->regmap = devm_regmap_init_i2c(i2c, config->regmap); |
| if (IS_ERR(lochnagar->regmap)) { |
| ret = PTR_ERR(lochnagar->regmap); |
| dev_err(dev, "Failed to allocate register map: %d\n", ret); |
| return ret; |
| } |
| |
| /* Wait for Lochnagar to boot */ |
| ret = lochnagar_wait_for_boot(lochnagar->regmap, &val); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read device ID: %d\n", ret); |
| return ret; |
| } |
| |
| devid = val & LOCHNAGAR_DEVICE_ID_MASK; |
| rev = val & LOCHNAGAR_REV_ID_MASK; |
| |
| if (devid != config->id) { |
| dev_err(dev, |
| "ID does not match %s (expected 0x%x got 0x%x)\n", |
| config->name, config->id, devid); |
| return -ENODEV; |
| } |
| |
| /* Identify firmware */ |
| ret = regmap_read(lochnagar->regmap, LOCHNAGAR_FIRMWARE_ID1, &val); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read firmware id 1: %d\n", ret); |
| return ret; |
| } |
| |
| firmwareid = val; |
| |
| ret = regmap_read(lochnagar->regmap, LOCHNAGAR_FIRMWARE_ID2, &val); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read firmware id 2: %d\n", ret); |
| return ret; |
| } |
| |
| firmwareid |= (val << config->regmap->val_bits); |
| |
| dev_info(dev, "Found %s (0x%x) revision %u firmware 0x%.6x\n", |
| config->name, devid, rev + 1, firmwareid); |
| |
| ret = regmap_register_patch(lochnagar->regmap, config->patch, |
| config->npatch); |
| if (ret < 0) { |
| dev_err(dev, "Failed to register patch: %d\n", ret); |
| return ret; |
| } |
| |
| ret = devm_of_platform_populate(dev); |
| if (ret < 0) { |
| dev_err(dev, "Failed to populate child nodes: %d\n", ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static struct i2c_driver lochnagar_i2c_driver = { |
| .driver = { |
| .name = "lochnagar", |
| .of_match_table = lochnagar_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| .probe = lochnagar_i2c_probe, |
| }; |
| |
| static int __init lochnagar_i2c_init(void) |
| { |
| int ret; |
| |
| ret = i2c_add_driver(&lochnagar_i2c_driver); |
| if (ret) |
| pr_err("Failed to register Lochnagar driver: %d\n", ret); |
| |
| return ret; |
| } |
| subsys_initcall(lochnagar_i2c_init); |