| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Support for usb functionality of Hikey series boards |
| * based on Hisilicon Kirin Soc. |
| * |
| * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd. |
| * http://www.huawei.com |
| * |
| * Authors: Yu Chen <chenyu56@huawei.com> |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/kernel.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/notifier.h> |
| #include <linux/of_gpio.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/usb/role.h> |
| |
| #define DEVICE_DRIVER_NAME "hisi_hikey_usb" |
| |
| #define HUB_VBUS_POWER_ON 1 |
| #define HUB_VBUS_POWER_OFF 0 |
| #define USB_SWITCH_TO_HUB 1 |
| #define USB_SWITCH_TO_TYPEC 0 |
| #define TYPEC_VBUS_POWER_ON 1 |
| #define TYPEC_VBUS_POWER_OFF 0 |
| |
| struct hisi_hikey_usb { |
| struct device *dev; |
| struct gpio_desc *otg_switch; |
| struct gpio_desc *typec_vbus; |
| struct gpio_desc *reset; |
| |
| struct regulator *regulator; |
| |
| struct usb_role_switch *hub_role_sw; |
| |
| struct usb_role_switch *dev_role_sw; |
| enum usb_role role; |
| |
| struct mutex lock; |
| struct work_struct work; |
| |
| struct notifier_block nb; |
| }; |
| |
| static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value) |
| { |
| int ret, status; |
| |
| if (!hisi_hikey_usb->regulator) |
| return; |
| |
| status = regulator_is_enabled(hisi_hikey_usb->regulator); |
| if (status == !!value) |
| return; |
| |
| if (value) |
| ret = regulator_enable(hisi_hikey_usb->regulator); |
| else |
| ret = regulator_disable(hisi_hikey_usb->regulator); |
| |
| if (ret) |
| dev_err(hisi_hikey_usb->dev, |
| "Can't switch regulator state to %s\n", |
| value ? "enabled" : "disabled"); |
| } |
| |
| static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, |
| int switch_to) |
| { |
| if (!hisi_hikey_usb->otg_switch) |
| return; |
| |
| gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to); |
| } |
| |
| static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, |
| int value) |
| { |
| if (!hisi_hikey_usb->typec_vbus) |
| return; |
| |
| gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value); |
| } |
| |
| static void relay_set_role_switch(struct work_struct *work) |
| { |
| struct hisi_hikey_usb *hisi_hikey_usb = container_of(work, |
| struct hisi_hikey_usb, |
| work); |
| struct usb_role_switch *sw; |
| enum usb_role role; |
| |
| if (!hisi_hikey_usb || !hisi_hikey_usb->dev_role_sw) |
| return; |
| |
| mutex_lock(&hisi_hikey_usb->lock); |
| switch (hisi_hikey_usb->role) { |
| case USB_ROLE_NONE: |
| usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF); |
| usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB); |
| hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON); |
| break; |
| case USB_ROLE_HOST: |
| hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF); |
| usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC); |
| usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_ON); |
| break; |
| case USB_ROLE_DEVICE: |
| hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF); |
| usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF); |
| usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC); |
| break; |
| default: |
| break; |
| } |
| sw = hisi_hikey_usb->dev_role_sw; |
| role = hisi_hikey_usb->role; |
| mutex_unlock(&hisi_hikey_usb->lock); |
| |
| usb_role_switch_set_role(sw, role); |
| } |
| |
| static int hub_usb_role_switch_set(struct usb_role_switch *sw, enum usb_role role) |
| { |
| struct hisi_hikey_usb *hisi_hikey_usb = usb_role_switch_get_drvdata(sw); |
| |
| if (!hisi_hikey_usb || !hisi_hikey_usb->dev_role_sw) |
| return -EINVAL; |
| |
| mutex_lock(&hisi_hikey_usb->lock); |
| hisi_hikey_usb->role = role; |
| mutex_unlock(&hisi_hikey_usb->lock); |
| |
| schedule_work(&hisi_hikey_usb->work); |
| |
| return 0; |
| } |
| |
| static int hisi_hikey_usb_of_role_switch(struct platform_device *pdev, |
| struct hisi_hikey_usb *hisi_hikey_usb) |
| { |
| struct device *dev = &pdev->dev; |
| struct usb_role_switch_desc hub_role_switch = {NULL}; |
| |
| if (!device_property_read_bool(dev, "usb-role-switch")) |
| return 0; |
| |
| hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(hisi_hikey_usb->otg_switch)) { |
| dev_err(dev, "get otg-switch failed with error %ld\n", |
| PTR_ERR(hisi_hikey_usb->otg_switch)); |
| return PTR_ERR(hisi_hikey_usb->otg_switch); |
| } |
| |
| hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(hisi_hikey_usb->typec_vbus)) { |
| dev_err(dev, "get typec-vbus failed with error %ld\n", |
| PTR_ERR(hisi_hikey_usb->typec_vbus)); |
| return PTR_ERR(hisi_hikey_usb->typec_vbus); |
| } |
| |
| hisi_hikey_usb->reset = devm_gpiod_get_optional(dev, |
| "hub-reset-en", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(hisi_hikey_usb->reset)) { |
| dev_err(dev, "get hub-reset-en failed with error %ld\n", |
| PTR_ERR(hisi_hikey_usb->reset)); |
| return PTR_ERR(hisi_hikey_usb->reset); |
| } |
| |
| hisi_hikey_usb->dev_role_sw = usb_role_switch_get(dev); |
| if (!hisi_hikey_usb->dev_role_sw) |
| return -EPROBE_DEFER; |
| if (IS_ERR(hisi_hikey_usb->dev_role_sw)) { |
| dev_err(dev, "get device role switch failed with error %ld\n", |
| PTR_ERR(hisi_hikey_usb->dev_role_sw)); |
| return PTR_ERR(hisi_hikey_usb->dev_role_sw); |
| } |
| |
| INIT_WORK(&hisi_hikey_usb->work, relay_set_role_switch); |
| |
| hub_role_switch.fwnode = dev_fwnode(dev); |
| hub_role_switch.set = hub_usb_role_switch_set; |
| hub_role_switch.driver_data = hisi_hikey_usb; |
| |
| hisi_hikey_usb->hub_role_sw = usb_role_switch_register(dev, |
| &hub_role_switch); |
| |
| if (IS_ERR(hisi_hikey_usb->hub_role_sw)) { |
| dev_err(dev, |
| "failed to register hub role with error %ld\n", |
| PTR_ERR(hisi_hikey_usb->hub_role_sw)); |
| usb_role_switch_put(hisi_hikey_usb->dev_role_sw); |
| return PTR_ERR(hisi_hikey_usb->hub_role_sw); |
| } |
| |
| return 0; |
| } |
| |
| static int hisi_hikey_usb_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct hisi_hikey_usb *hisi_hikey_usb; |
| int ret; |
| |
| hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL); |
| if (!hisi_hikey_usb) |
| return -ENOMEM; |
| |
| hisi_hikey_usb->dev = &pdev->dev; |
| mutex_init(&hisi_hikey_usb->lock); |
| |
| hisi_hikey_usb->regulator = devm_regulator_get(dev, "hub-vdd"); |
| if (IS_ERR(hisi_hikey_usb->regulator)) { |
| if (PTR_ERR(hisi_hikey_usb->regulator) == -EPROBE_DEFER) { |
| dev_info(dev, "waiting for hub-vdd-supply\n"); |
| return PTR_ERR(hisi_hikey_usb->regulator); |
| } |
| dev_err(dev, "get hub-vdd-supply failed with error %ld\n", |
| PTR_ERR(hisi_hikey_usb->regulator)); |
| return PTR_ERR(hisi_hikey_usb->regulator); |
| } |
| |
| ret = hisi_hikey_usb_of_role_switch(pdev, hisi_hikey_usb); |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, hisi_hikey_usb); |
| |
| return 0; |
| } |
| |
| static int hisi_hikey_usb_remove(struct platform_device *pdev) |
| { |
| struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev); |
| |
| if (hisi_hikey_usb->hub_role_sw) { |
| usb_role_switch_unregister(hisi_hikey_usb->hub_role_sw); |
| |
| if (hisi_hikey_usb->dev_role_sw) |
| usb_role_switch_put(hisi_hikey_usb->dev_role_sw); |
| } else { |
| hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF); |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id id_table_hisi_hikey_usb[] = { |
| { .compatible = "hisilicon,usbhub" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, id_table_hisi_hikey_usb); |
| |
| static struct platform_driver hisi_hikey_usb_driver = { |
| .probe = hisi_hikey_usb_probe, |
| .remove = hisi_hikey_usb_remove, |
| .driver = { |
| .name = DEVICE_DRIVER_NAME, |
| .of_match_table = id_table_hisi_hikey_usb, |
| }, |
| }; |
| |
| module_platform_driver(hisi_hikey_usb_driver); |
| |
| MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>"); |
| MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey"); |
| MODULE_LICENSE("GPL v2"); |