| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Simple memory-mapped device MDIO MUX driver |
| * |
| * Author: Timur Tabi <timur@freescale.com> |
| * |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/mdio-mux.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/of_mdio.h> |
| #include <linux/phy.h> |
| #include <linux/platform_device.h> |
| |
| struct mdio_mux_mmioreg_state { |
| void *mux_handle; |
| phys_addr_t phys; |
| unsigned int iosize; |
| unsigned int mask; |
| }; |
| |
| /* |
| * MDIO multiplexing switch function |
| * |
| * This function is called by the mdio-mux layer when it thinks the mdio bus |
| * multiplexer needs to switch. |
| * |
| * 'current_child' is the current value of the mux register (masked via |
| * s->mask). |
| * |
| * 'desired_child' is the value of the 'reg' property of the target child MDIO |
| * node. |
| * |
| * The first time this function is called, current_child == -1. |
| * |
| * If current_child == desired_child, then the mux is already set to the |
| * correct bus. |
| */ |
| static int mdio_mux_mmioreg_switch_fn(int current_child, int desired_child, |
| void *data) |
| { |
| struct mdio_mux_mmioreg_state *s = data; |
| |
| if (current_child ^ desired_child) { |
| void __iomem *p = ioremap(s->phys, s->iosize); |
| if (!p) |
| return -ENOMEM; |
| |
| switch (s->iosize) { |
| case sizeof(uint8_t): { |
| uint8_t x, y; |
| |
| x = ioread8(p); |
| y = (x & ~s->mask) | desired_child; |
| if (x != y) { |
| iowrite8((x & ~s->mask) | desired_child, p); |
| pr_debug("%s: %02x -> %02x\n", __func__, x, y); |
| } |
| |
| break; |
| } |
| case sizeof(uint16_t): { |
| uint16_t x, y; |
| |
| x = ioread16(p); |
| y = (x & ~s->mask) | desired_child; |
| if (x != y) { |
| iowrite16((x & ~s->mask) | desired_child, p); |
| pr_debug("%s: %04x -> %04x\n", __func__, x, y); |
| } |
| |
| break; |
| } |
| case sizeof(uint32_t): { |
| uint32_t x, y; |
| |
| x = ioread32(p); |
| y = (x & ~s->mask) | desired_child; |
| if (x != y) { |
| iowrite32((x & ~s->mask) | desired_child, p); |
| pr_debug("%s: %08x -> %08x\n", __func__, x, y); |
| } |
| |
| break; |
| } |
| } |
| |
| iounmap(p); |
| } |
| |
| return 0; |
| } |
| |
| static int mdio_mux_mmioreg_probe(struct platform_device *pdev) |
| { |
| struct device_node *np2, *np = pdev->dev.of_node; |
| struct mdio_mux_mmioreg_state *s; |
| struct resource res; |
| const __be32 *iprop; |
| int len, ret; |
| |
| dev_dbg(&pdev->dev, "probing node %pOF\n", np); |
| |
| s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); |
| if (!s) |
| return -ENOMEM; |
| |
| ret = of_address_to_resource(np, 0, &res); |
| if (ret) { |
| dev_err(&pdev->dev, "could not obtain memory map for node %pOF\n", |
| np); |
| return ret; |
| } |
| s->phys = res.start; |
| |
| s->iosize = resource_size(&res); |
| if (s->iosize != sizeof(uint8_t) && |
| s->iosize != sizeof(uint16_t) && |
| s->iosize != sizeof(uint32_t)) { |
| dev_err(&pdev->dev, "only 8/16/32-bit registers are supported\n"); |
| return -EINVAL; |
| } |
| |
| iprop = of_get_property(np, "mux-mask", &len); |
| if (!iprop || len != sizeof(uint32_t)) { |
| dev_err(&pdev->dev, "missing or invalid mux-mask property\n"); |
| return -ENODEV; |
| } |
| if (be32_to_cpup(iprop) >= BIT(s->iosize * 8)) { |
| dev_err(&pdev->dev, "only 8/16/32-bit registers are supported\n"); |
| return -EINVAL; |
| } |
| s->mask = be32_to_cpup(iprop); |
| |
| /* |
| * Verify that the 'reg' property of each child MDIO bus does not |
| * set any bits outside of the 'mask'. |
| */ |
| for_each_available_child_of_node(np, np2) { |
| u64 reg; |
| |
| if (of_property_read_reg(np2, 0, ®, NULL)) { |
| dev_err(&pdev->dev, "mdio-mux child node %pOF is " |
| "missing a 'reg' property\n", np2); |
| of_node_put(np2); |
| return -ENODEV; |
| } |
| if ((u32)reg & ~s->mask) { |
| dev_err(&pdev->dev, "mdio-mux child node %pOF has " |
| "a 'reg' value with unmasked bits\n", |
| np2); |
| of_node_put(np2); |
| return -ENODEV; |
| } |
| } |
| |
| ret = mdio_mux_init(&pdev->dev, pdev->dev.of_node, |
| mdio_mux_mmioreg_switch_fn, |
| &s->mux_handle, s, NULL); |
| if (ret) |
| return dev_err_probe(&pdev->dev, ret, |
| "failed to register mdio-mux bus %pOF\n", np); |
| |
| pdev->dev.platform_data = s; |
| |
| return 0; |
| } |
| |
| static void mdio_mux_mmioreg_remove(struct platform_device *pdev) |
| { |
| struct mdio_mux_mmioreg_state *s = dev_get_platdata(&pdev->dev); |
| |
| mdio_mux_uninit(s->mux_handle); |
| } |
| |
| static const struct of_device_id mdio_mux_mmioreg_match[] = { |
| { |
| .compatible = "mdio-mux-mmioreg", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mdio_mux_mmioreg_match); |
| |
| static struct platform_driver mdio_mux_mmioreg_driver = { |
| .driver = { |
| .name = "mdio-mux-mmioreg", |
| .of_match_table = mdio_mux_mmioreg_match, |
| }, |
| .probe = mdio_mux_mmioreg_probe, |
| .remove_new = mdio_mux_mmioreg_remove, |
| }; |
| |
| module_platform_driver(mdio_mux_mmioreg_driver); |
| |
| MODULE_AUTHOR("Timur Tabi <timur@freescale.com>"); |
| MODULE_DESCRIPTION("Memory-mapped device MDIO MUX driver"); |
| MODULE_LICENSE("GPL v2"); |