| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Pinconf driver for TI DA850/OMAP-L138/AM18XX pullup/pulldown groups |
| * |
| * Copyright (C) 2016 David Lechner |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/platform_device.h> |
| |
| #define DA850_PUPD_ENA 0x00 |
| #define DA850_PUPD_SEL 0x04 |
| |
| struct da850_pupd_data { |
| void __iomem *base; |
| struct pinctrl_desc desc; |
| struct pinctrl_dev *pinctrl; |
| }; |
| |
| static const char * const da850_pupd_group_names[] = { |
| "cp0", "cp1", "cp2", "cp3", "cp4", "cp5", "cp6", "cp7", |
| "cp8", "cp9", "cp10", "cp11", "cp12", "cp13", "cp14", "cp15", |
| "cp16", "cp17", "cp18", "cp19", "cp20", "cp21", "cp22", "cp23", |
| "cp24", "cp25", "cp26", "cp27", "cp28", "cp29", "cp30", "cp31", |
| }; |
| |
| static int da850_pupd_get_groups_count(struct pinctrl_dev *pctldev) |
| { |
| return ARRAY_SIZE(da850_pupd_group_names); |
| } |
| |
| static const char *da850_pupd_get_group_name(struct pinctrl_dev *pctldev, |
| unsigned int selector) |
| { |
| return da850_pupd_group_names[selector]; |
| } |
| |
| static int da850_pupd_get_group_pins(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| const unsigned int **pins, |
| unsigned int *num_pins) |
| { |
| *num_pins = 0; |
| |
| return 0; |
| } |
| |
| static const struct pinctrl_ops da850_pupd_pctlops = { |
| .get_groups_count = da850_pupd_get_groups_count, |
| .get_group_name = da850_pupd_get_group_name, |
| .get_group_pins = da850_pupd_get_group_pins, |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_group, |
| .dt_free_map = pinconf_generic_dt_free_map, |
| }; |
| |
| static int da850_pupd_pin_config_group_get(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| unsigned long *config) |
| { |
| struct da850_pupd_data *data = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param = pinconf_to_config_param(*config); |
| u32 val; |
| u16 arg; |
| |
| val = readl(data->base + DA850_PUPD_ENA); |
| arg = !!(~val & BIT(selector)); |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| break; |
| case PIN_CONFIG_BIAS_PULL_UP: |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| if (arg) { |
| /* bias is disabled */ |
| arg = 0; |
| break; |
| } |
| val = readl(data->base + DA850_PUPD_SEL); |
| if (param == PIN_CONFIG_BIAS_PULL_DOWN) |
| val = ~val; |
| arg = !!(val & BIT(selector)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *config = pinconf_to_config_packed(param, arg); |
| |
| return 0; |
| } |
| |
| static int da850_pupd_pin_config_group_set(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| unsigned long *configs, |
| unsigned int num_configs) |
| { |
| struct da850_pupd_data *data = pinctrl_dev_get_drvdata(pctldev); |
| u32 ena, sel; |
| enum pin_config_param param; |
| int i; |
| |
| ena = readl(data->base + DA850_PUPD_ENA); |
| sel = readl(data->base + DA850_PUPD_SEL); |
| |
| for (i = 0; i < num_configs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| ena &= ~BIT(selector); |
| break; |
| case PIN_CONFIG_BIAS_PULL_UP: |
| ena |= BIT(selector); |
| sel |= BIT(selector); |
| break; |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| ena |= BIT(selector); |
| sel &= ~BIT(selector); |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| writel(sel, data->base + DA850_PUPD_SEL); |
| writel(ena, data->base + DA850_PUPD_ENA); |
| |
| return 0; |
| } |
| |
| static const struct pinconf_ops da850_pupd_confops = { |
| .is_generic = true, |
| .pin_config_group_get = da850_pupd_pin_config_group_get, |
| .pin_config_group_set = da850_pupd_pin_config_group_set, |
| }; |
| |
| static int da850_pupd_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct da850_pupd_data *data; |
| |
| data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(data->base)) { |
| dev_err(dev, "Could not map resource\n"); |
| return PTR_ERR(data->base); |
| } |
| |
| data->desc.name = dev_name(dev); |
| data->desc.pctlops = &da850_pupd_pctlops; |
| data->desc.confops = &da850_pupd_confops; |
| data->desc.owner = THIS_MODULE; |
| |
| data->pinctrl = devm_pinctrl_register(dev, &data->desc, data); |
| if (IS_ERR(data->pinctrl)) { |
| dev_err(dev, "Failed to register pinctrl\n"); |
| return PTR_ERR(data->pinctrl); |
| } |
| |
| platform_set_drvdata(pdev, data); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id da850_pupd_of_match[] = { |
| { .compatible = "ti,da850-pupd" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, da850_pupd_of_match); |
| |
| static struct platform_driver da850_pupd_driver = { |
| .driver = { |
| .name = "ti-da850-pupd", |
| .of_match_table = da850_pupd_of_match, |
| }, |
| .probe = da850_pupd_probe, |
| }; |
| module_platform_driver(da850_pupd_driver); |
| |
| MODULE_AUTHOR("David Lechner <david@lechnology.com>"); |
| MODULE_DESCRIPTION("TI DA850/OMAP-L138/AM18XX pullup/pulldown configuration"); |
| MODULE_LICENSE("GPL"); |