| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // sky81452-regulator.c SKY81452 regulator driver |
| // |
| // Copyright 2014 Skyworks Solutions Inc. |
| // Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| /* registers */ |
| #define SKY81452_REG1 0x01 |
| #define SKY81452_REG3 0x03 |
| |
| /* bit mask */ |
| #define SKY81452_LEN 0x40 |
| #define SKY81452_LOUT 0x1F |
| |
| static const struct regulator_ops sky81452_reg_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| }; |
| |
| static const struct linear_range sky81452_reg_ranges[] = { |
| REGULATOR_LINEAR_RANGE(4500000, 0, 14, 250000), |
| REGULATOR_LINEAR_RANGE(9000000, 15, 31, 1000000), |
| }; |
| |
| static const struct regulator_desc sky81452_reg = { |
| .name = "LOUT", |
| .of_match = of_match_ptr("lout"), |
| .regulators_node = of_match_ptr("regulator"), |
| .ops = &sky81452_reg_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| .n_voltages = SKY81452_LOUT + 1, |
| .linear_ranges = sky81452_reg_ranges, |
| .n_linear_ranges = ARRAY_SIZE(sky81452_reg_ranges), |
| .vsel_reg = SKY81452_REG3, |
| .vsel_mask = SKY81452_LOUT, |
| .enable_reg = SKY81452_REG1, |
| .enable_mask = SKY81452_LEN, |
| }; |
| |
| static int sky81452_reg_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct regulator_init_data *init_data = dev_get_platdata(dev); |
| struct regulator_config config = { }; |
| struct regulator_dev *rdev; |
| |
| config.dev = dev->parent; |
| config.init_data = init_data; |
| config.of_node = dev->of_node; |
| config.regmap = dev_get_drvdata(dev->parent); |
| |
| rdev = devm_regulator_register(dev, &sky81452_reg, &config); |
| if (IS_ERR(rdev)) { |
| dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(rdev)); |
| return PTR_ERR(rdev); |
| } |
| |
| platform_set_drvdata(pdev, rdev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver sky81452_reg_driver = { |
| .driver = { |
| .name = "sky81452-regulator", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe = sky81452_reg_probe, |
| }; |
| |
| module_platform_driver(sky81452_reg_driver); |
| |
| MODULE_DESCRIPTION("Skyworks SKY81452 Regulator driver"); |
| MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>"); |
| MODULE_LICENSE("GPL v2"); |