| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver |
| * |
| * Copyright (C) 2006-2008 Barco N.V. |
| * Derived from the Cypress cy7c67200/300 ezusb linux driver and |
| * based on multiple host controller drivers inside the linux kernel. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/usb.h> |
| |
| #include "c67x00.h" |
| #include "c67x00-hcd.h" |
| |
| /* -------------------------------------------------------------------------- |
| * Root Hub Support |
| */ |
| |
| static __u8 c67x00_hub_des[] = { |
| 0x09, /* __u8 bLength; */ |
| USB_DT_HUB, /* __u8 bDescriptorType; Hub-descriptor */ |
| 0x02, /* __u8 bNbrPorts; */ |
| 0x00, /* __u16 wHubCharacteristics; */ |
| 0x00, /* (per-port OC, no power switching) */ |
| 0x32, /* __u8 bPwrOn2pwrGood; 2ms */ |
| 0x00, /* __u8 bHubContrCurrent; 0 mA */ |
| 0x00, /* __u8 DeviceRemovable; ** 7 Ports max ** */ |
| 0xff, /* __u8 PortPwrCtrlMask; ** 7 ports max ** */ |
| }; |
| |
| static void c67x00_hub_reset_host_port(struct c67x00_sie *sie, int port) |
| { |
| struct c67x00_hcd *c67x00 = sie->private_data; |
| unsigned long flags; |
| |
| c67x00_ll_husb_reset(sie, port); |
| |
| spin_lock_irqsave(&c67x00->lock, flags); |
| c67x00_ll_husb_reset_port(sie, port); |
| spin_unlock_irqrestore(&c67x00->lock, flags); |
| |
| c67x00_ll_set_husb_eot(sie->dev, DEFAULT_EOT); |
| } |
| |
| static int c67x00_hub_status_data(struct usb_hcd *hcd, char *buf) |
| { |
| struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); |
| struct c67x00_sie *sie = c67x00->sie; |
| u16 status; |
| int i; |
| |
| *buf = 0; |
| status = c67x00_ll_usb_get_status(sie); |
| for (i = 0; i < C67X00_PORTS; i++) |
| if (status & PORT_CONNECT_CHANGE(i)) |
| *buf |= (1 << i); |
| |
| /* bit 0 denotes hub change, b1..n port change */ |
| *buf <<= 1; |
| |
| return !!*buf; |
| } |
| |
| static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, |
| u16 wIndex, char *buf, u16 wLength) |
| { |
| struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); |
| struct c67x00_sie *sie = c67x00->sie; |
| u16 status, usb_status; |
| int len = 0; |
| unsigned int port = wIndex-1; |
| u16 wPortChange, wPortStatus; |
| |
| switch (typeReq) { |
| |
| case GetHubStatus: |
| *(__le32 *) buf = cpu_to_le32(0); |
| len = 4; /* hub power */ |
| break; |
| |
| case GetPortStatus: |
| if (wIndex > C67X00_PORTS) |
| return -EPIPE; |
| |
| status = c67x00_ll_usb_get_status(sie); |
| usb_status = c67x00_ll_get_usb_ctl(sie); |
| |
| wPortChange = 0; |
| if (status & PORT_CONNECT_CHANGE(port)) |
| wPortChange |= USB_PORT_STAT_C_CONNECTION; |
| |
| wPortStatus = USB_PORT_STAT_POWER; |
| if (!(status & PORT_SE0_STATUS(port))) |
| wPortStatus |= USB_PORT_STAT_CONNECTION; |
| if (usb_status & LOW_SPEED_PORT(port)) { |
| wPortStatus |= USB_PORT_STAT_LOW_SPEED; |
| c67x00->low_speed_ports |= (1 << port); |
| } else |
| c67x00->low_speed_ports &= ~(1 << port); |
| |
| if (usb_status & SOF_EOP_EN(port)) |
| wPortStatus |= USB_PORT_STAT_ENABLE; |
| |
| *(__le16 *) buf = cpu_to_le16(wPortStatus); |
| *(__le16 *) (buf + 2) = cpu_to_le16(wPortChange); |
| len = 4; |
| break; |
| |
| case SetHubFeature: /* We don't implement these */ |
| case ClearHubFeature: |
| switch (wValue) { |
| case C_HUB_OVER_CURRENT: |
| case C_HUB_LOCAL_POWER: |
| len = 0; |
| break; |
| |
| default: |
| return -EPIPE; |
| } |
| break; |
| |
| case SetPortFeature: |
| if (wIndex > C67X00_PORTS) |
| return -EPIPE; |
| |
| switch (wValue) { |
| case USB_PORT_FEAT_SUSPEND: |
| dev_dbg(c67x00_hcd_dev(c67x00), |
| "SetPortFeature %d (SUSPEND)\n", port); |
| len = 0; |
| break; |
| |
| case USB_PORT_FEAT_RESET: |
| c67x00_hub_reset_host_port(sie, port); |
| len = 0; |
| break; |
| |
| case USB_PORT_FEAT_POWER: |
| /* Power always enabled */ |
| len = 0; |
| break; |
| |
| default: |
| dev_dbg(c67x00_hcd_dev(c67x00), |
| "%s: SetPortFeature %d (0x%04x) Error!\n", |
| __func__, port, wValue); |
| return -EPIPE; |
| } |
| break; |
| |
| case ClearPortFeature: |
| if (wIndex > C67X00_PORTS) |
| return -EPIPE; |
| |
| switch (wValue) { |
| case USB_PORT_FEAT_ENABLE: |
| /* Reset the port so that the c67x00 also notices the |
| * disconnect */ |
| c67x00_hub_reset_host_port(sie, port); |
| len = 0; |
| break; |
| |
| case USB_PORT_FEAT_C_ENABLE: |
| dev_dbg(c67x00_hcd_dev(c67x00), |
| "ClearPortFeature (%d): C_ENABLE\n", port); |
| len = 0; |
| break; |
| |
| case USB_PORT_FEAT_SUSPEND: |
| dev_dbg(c67x00_hcd_dev(c67x00), |
| "ClearPortFeature (%d): SUSPEND\n", port); |
| len = 0; |
| break; |
| |
| case USB_PORT_FEAT_C_SUSPEND: |
| dev_dbg(c67x00_hcd_dev(c67x00), |
| "ClearPortFeature (%d): C_SUSPEND\n", port); |
| len = 0; |
| break; |
| |
| case USB_PORT_FEAT_POWER: |
| dev_dbg(c67x00_hcd_dev(c67x00), |
| "ClearPortFeature (%d): POWER\n", port); |
| return -EPIPE; |
| |
| case USB_PORT_FEAT_C_CONNECTION: |
| c67x00_ll_usb_clear_status(sie, |
| PORT_CONNECT_CHANGE(port)); |
| len = 0; |
| break; |
| |
| case USB_PORT_FEAT_C_OVER_CURRENT: |
| dev_dbg(c67x00_hcd_dev(c67x00), |
| "ClearPortFeature (%d): OVER_CURRENT\n", port); |
| len = 0; |
| break; |
| |
| case USB_PORT_FEAT_C_RESET: |
| dev_dbg(c67x00_hcd_dev(c67x00), |
| "ClearPortFeature (%d): C_RESET\n", port); |
| len = 0; |
| break; |
| |
| default: |
| dev_dbg(c67x00_hcd_dev(c67x00), |
| "%s: ClearPortFeature %d (0x%04x) Error!\n", |
| __func__, port, wValue); |
| return -EPIPE; |
| } |
| break; |
| |
| case GetHubDescriptor: |
| len = min_t(unsigned int, sizeof(c67x00_hub_des), wLength); |
| memcpy(buf, c67x00_hub_des, len); |
| break; |
| |
| default: |
| dev_dbg(c67x00_hcd_dev(c67x00), "%s: unknown\n", __func__); |
| return -EPIPE; |
| } |
| |
| return 0; |
| } |
| |
| /* --------------------------------------------------------------------- |
| * Main part of host controller driver |
| */ |
| |
| /* |
| * c67x00_hcd_irq |
| * |
| * This function is called from the interrupt handler in c67x00-drv.c |
| */ |
| static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg) |
| { |
| struct c67x00_hcd *c67x00 = sie->private_data; |
| struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00); |
| |
| /* Handle sie message flags */ |
| if (msg) { |
| if (msg & HUSB_TDListDone) |
| c67x00_sched_kick(c67x00); |
| else |
| dev_warn(c67x00_hcd_dev(c67x00), |
| "Unknown SIE msg flag(s): 0x%04x\n", msg); |
| } |
| |
| if (unlikely(hcd->state == HC_STATE_HALT)) |
| return; |
| |
| if (!HCD_HW_ACCESSIBLE(hcd)) |
| return; |
| |
| /* Handle Start of frame events */ |
| if (int_status & SOFEOP_FLG(sie->sie_num)) { |
| c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG); |
| c67x00_sched_kick(c67x00); |
| } |
| } |
| |
| /* |
| * c67x00_hcd_start: Host controller start hook |
| */ |
| static int c67x00_hcd_start(struct usb_hcd *hcd) |
| { |
| hcd->uses_new_polling = 1; |
| hcd->state = HC_STATE_RUNNING; |
| set_bit(HCD_FLAG_POLL_RH, &hcd->flags); |
| |
| return 0; |
| } |
| |
| /* |
| * c67x00_hcd_stop: Host controller stop hook |
| */ |
| static void c67x00_hcd_stop(struct usb_hcd *hcd) |
| { |
| /* Nothing to do */ |
| } |
| |
| static int c67x00_hcd_get_frame(struct usb_hcd *hcd) |
| { |
| struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); |
| u16 temp_val; |
| |
| dev_dbg(c67x00_hcd_dev(c67x00), "%s\n", __func__); |
| temp_val = c67x00_ll_husb_get_frame(c67x00->sie); |
| temp_val &= HOST_FRAME_MASK; |
| return temp_val ? (temp_val - 1) : HOST_FRAME_MASK; |
| } |
| |
| static const struct hc_driver c67x00_hc_driver = { |
| .description = "c67x00-hcd", |
| .product_desc = "Cypress C67X00 Host Controller", |
| .hcd_priv_size = sizeof(struct c67x00_hcd), |
| .flags = HCD_USB11 | HCD_MEMORY, |
| |
| /* |
| * basic lifecycle operations |
| */ |
| .start = c67x00_hcd_start, |
| .stop = c67x00_hcd_stop, |
| |
| /* |
| * managing i/o requests and associated device resources |
| */ |
| .urb_enqueue = c67x00_urb_enqueue, |
| .urb_dequeue = c67x00_urb_dequeue, |
| .endpoint_disable = c67x00_endpoint_disable, |
| |
| /* |
| * scheduling support |
| */ |
| .get_frame_number = c67x00_hcd_get_frame, |
| |
| /* |
| * root hub support |
| */ |
| .hub_status_data = c67x00_hub_status_data, |
| .hub_control = c67x00_hub_control, |
| }; |
| |
| /* --------------------------------------------------------------------- |
| * Setup/Teardown routines |
| */ |
| |
| int c67x00_hcd_probe(struct c67x00_sie *sie) |
| { |
| struct c67x00_hcd *c67x00; |
| struct usb_hcd *hcd; |
| unsigned long flags; |
| int retval; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| hcd = usb_create_hcd(&c67x00_hc_driver, sie_dev(sie), "c67x00_sie"); |
| if (!hcd) { |
| retval = -ENOMEM; |
| goto err0; |
| } |
| c67x00 = hcd_to_c67x00_hcd(hcd); |
| |
| spin_lock_init(&c67x00->lock); |
| c67x00->sie = sie; |
| |
| INIT_LIST_HEAD(&c67x00->list[PIPE_ISOCHRONOUS]); |
| INIT_LIST_HEAD(&c67x00->list[PIPE_INTERRUPT]); |
| INIT_LIST_HEAD(&c67x00->list[PIPE_CONTROL]); |
| INIT_LIST_HEAD(&c67x00->list[PIPE_BULK]); |
| c67x00->urb_count = 0; |
| INIT_LIST_HEAD(&c67x00->td_list); |
| c67x00->td_base_addr = CY_HCD_BUF_ADDR + SIE_TD_OFFSET(sie->sie_num); |
| c67x00->buf_base_addr = CY_HCD_BUF_ADDR + SIE_BUF_OFFSET(sie->sie_num); |
| c67x00->max_frame_bw = MAX_FRAME_BW_STD; |
| |
| c67x00_ll_husb_init_host_port(sie); |
| |
| init_completion(&c67x00->endpoint_disable); |
| retval = c67x00_sched_start_scheduler(c67x00); |
| if (retval) |
| goto err1; |
| |
| retval = usb_add_hcd(hcd, 0, 0); |
| if (retval) { |
| dev_dbg(sie_dev(sie), "%s: usb_add_hcd returned %d\n", |
| __func__, retval); |
| goto err2; |
| } |
| |
| device_wakeup_enable(hcd->self.controller); |
| |
| spin_lock_irqsave(&sie->lock, flags); |
| sie->private_data = c67x00; |
| sie->irq = c67x00_hcd_irq; |
| spin_unlock_irqrestore(&sie->lock, flags); |
| |
| return retval; |
| |
| err2: |
| c67x00_sched_stop_scheduler(c67x00); |
| err1: |
| usb_put_hcd(hcd); |
| err0: |
| return retval; |
| } |
| |
| /* may be called with controller, bus, and devices active */ |
| void c67x00_hcd_remove(struct c67x00_sie *sie) |
| { |
| struct c67x00_hcd *c67x00 = sie->private_data; |
| struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00); |
| |
| c67x00_sched_stop_scheduler(c67x00); |
| usb_remove_hcd(hcd); |
| usb_put_hcd(hcd); |
| } |