tools/testing/ktest/examples/include/defaults.conf - linux - Git at Google

 # This file holds defaults for most the tests. It defines the options that
 # are most common to tests that are likely to be shared.
 #
 # Note, after including this file, a config file may override any option
 # with a DEFAULTS OVERRIDE section.
 #

 # For those cases that use the same machine to boot a 64 bit
 # and a 32 bit version. The MACHINE is the DNS name to get to the
 # box (usually different if it was 64 bit or 32 bit) but the
 # BOX here is defined as a variable that will be the name of the box
 # itself. It is useful for calling scripts that will power cycle
 # the box, as only one script needs to be created to power cycle
 # even though the box itself has multiple operating systems on it.
 # By default, BOX and MACHINE are the same.

 DEFAULTS IF NOT DEFINED BOX
 BOX := ${MACHINE}


 # Consider each box as 64 bit box, unless the config including this file
 # has defined BITS = 32

 DEFAULTS IF NOT DEFINED BITS
 BITS := 64


 DEFAULTS

 # THIS_DIR is used through out the configs and defaults to ${PWD} which
 # is the directory that ktest.pl was called from.

 THIS_DIR := ${PWD}


 # to organize your configs, having each machine save their configs
 # into a separate directly is useful.
 CONFIG_DIR := ${THIS_DIR}/configs/${MACHINE}

 # Reset the log before running each test.
 CLEAR_LOG = 1

 # As installing kernels usually requires root privilege, default the
 # user on the target as root. It is also required that the target
 # allows ssh to root from the host without asking for a password.

 SSH_USER = root

 # For accesing the machine, we will ssh to root@machine.
 SSH := ssh ${SSH_USER}@${MACHINE}

 # Update this. The default here is ktest will ssh to the target box
 # and run a script called 'run-test' located on that box.
 TEST = ${SSH} run-test

 # Point build dir to the git repo you use
 BUILD_DIR = ${THIS_DIR}/linux.git

 # Each machine will have its own output build directory.
 OUTPUT_DIR = ${THIS_DIR}/build/${MACHINE}

 # Yes this config is focused on x86 (but ktest works for other archs too)
 BUILD_TARGET = arch/x86/boot/bzImage
 TARGET_IMAGE = /boot/vmlinuz-test

 # have directory for the scripts to reboot and power cycle the boxes
 SCRIPTS_DIR := ${THIS_DIR}/scripts

 # You can have each box/machine have a script to power cycle it.
 # Name your script <box>-cycle.
 POWER_CYCLE = ${SCRIPTS_DIR}/${BOX}-cycle

 # This script is used to power off the box.
 POWER_OFF = ${SCRIPTS_DIR}/${BOX}-poweroff

 # Keep your test kernels separate from your other kernels.
 LOCALVERSION = -test

 # The /boot/grub/menu.lst is searched for the line:
 #  title Test Kernel
 # and ktest will use that kernel to reboot into.
 # For grub2 or other boot loaders, you need to set BOOT_TYPE
 # to 'script' and define other ways to load the kernel.
 # See snowball.conf example.
 #
 GRUB_MENU = Test Kernel

 # The kernel build will use this option.
 BUILD_OPTIONS = -j8

 # Keeping the log file with the output dir is convenient.
 LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log

 # Each box should have their own minum configuration
 # See min-config.conf
 MIN_CONFIG = ${CONFIG_DIR}/config-min

 # For things like randconfigs, there may be configs you find that
 # are already broken, or there may be some configs that you always
 # want set. Uncomment ADD_CONFIG and point it to the make config files
 # that set the configs you want to keep on (or off) in your build.
 # ADD_CONFIG is usually something to add configs to all machines,
 # where as, MIN_CONFIG is specific per machine.
 #ADD_CONFIG = ${THIS_DIR}/config-broken ${THIS_DIR}/config-general

 # To speed up reboots for bisects and patchcheck, instead of
 # waiting 60 seconds for the console to be idle, if this line is
 # seen in the console output, ktest will know the good kernel has
 # finished rebooting and it will be able to continue the tests.
 REBOOT_SUCCESS_LINE = ${MACHINE} login:

 # The following is different ways to end the test.
 # by setting the variable REBOOT to: none, error, fail or
 # something else, ktest will power cycle or reboot the target box
 # at the end of the tests.
 #
 # REBOOT := none
 #   Don't do anything at the end of the test.
 #
 # REBOOT := error
 #   Reboot the box if ktest detects an error
 #
 # REBOOT := fail
 #   Do not stop on failure, and after all tests are complete
 #   power off the box (for both success and error)
 #   This is good to run over a weekend and you don't want to waste
 #   electricity.
 #

 DEFAULTS IF ${REBOOT} == none
 REBOOT_ON_SUCCESS = 0
 REBOOT_ON_ERROR = 0
 POWEROFF_ON_ERROR = 0
 POWEROFF_ON_SUCCESS = 0

 DEFAULTS ELSE IF ${REBOOT} == error
 REBOOT_ON_SUCCESS = 0
 REBOOT_ON_ERROR = 1
 POWEROFF_ON_ERROR = 0
 POWEROFF_ON_SUCCESS = 0

 DEFAULTS ELSE IF ${REBOOT} == fail
 REBOOT_ON_SUCCESS = 0
 POWEROFF_ON_ERROR = 1
 POWEROFF_ON_SUCCESS = 1
 POWEROFF_AFTER_HALT = 120
 DIE_ON_FAILURE = 0

 # Store the failure information into this directory
 # such as the .config, dmesg, and build log.
 STORE_FAILURES = ${THIS_DIR}/failures

 DEFAULTS ELSE
 REBOOT_ON_SUCCESS = 1
 REBOOT_ON_ERROR = 1
 POWEROFF_ON_ERROR = 0
 POWEROFF_ON_SUCCESS = 0
	# This file holds defaults for most the tests. It defines the options that
	# are most common to tests that are likely to be shared.
	#
	# Note, after including this file, a config file may override any option
	# with a DEFAULTS OVERRIDE section.
	#

	# For those cases that use the same machine to boot a 64 bit
	# and a 32 bit version. The MACHINE is the DNS name to get to the
	# box (usually different if it was 64 bit or 32 bit) but the
	# BOX here is defined as a variable that will be the name of the box
	# itself. It is useful for calling scripts that will power cycle
	# the box, as only one script needs to be created to power cycle
	# even though the box itself has multiple operating systems on it.
	# By default, BOX and MACHINE are the same.

	DEFAULTS IF NOT DEFINED BOX
	BOX := ${MACHINE}


	# Consider each box as 64 bit box, unless the config including this file
	# has defined BITS = 32

	DEFAULTS IF NOT DEFINED BITS
	BITS := 64


	DEFAULTS

	# THIS_DIR is used through out the configs and defaults to ${PWD} which
	# is the directory that ktest.pl was called from.

	THIS_DIR := ${PWD}


	# to organize your configs, having each machine save their configs
	# into a separate directly is useful.
	CONFIG_DIR := ${THIS_DIR}/configs/${MACHINE}

	# Reset the log before running each test.
	CLEAR_LOG = 1

	# As installing kernels usually requires root privilege, default the
	# user on the target as root. It is also required that the target
	# allows ssh to root from the host without asking for a password.

	SSH_USER = root

	# For accesing the machine, we will ssh to root@machine.
	SSH := ssh ${SSH_USER}@${MACHINE}

	# Update this. The default here is ktest will ssh to the target box
	# and run a script called 'run-test' located on that box.
	TEST = ${SSH} run-test

	# Point build dir to the git repo you use
	BUILD_DIR = ${THIS_DIR}/linux.git

	# Each machine will have its own output build directory.
	OUTPUT_DIR = ${THIS_DIR}/build/${MACHINE}

	# Yes this config is focused on x86 (but ktest works for other archs too)
	BUILD_TARGET = arch/x86/boot/bzImage
	TARGET_IMAGE = /boot/vmlinuz-test

	# have directory for the scripts to reboot and power cycle the boxes
	SCRIPTS_DIR := ${THIS_DIR}/scripts

	# You can have each box/machine have a script to power cycle it.
	# Name your script <box>-cycle.
	POWER_CYCLE = ${SCRIPTS_DIR}/${BOX}-cycle

	# This script is used to power off the box.
	POWER_OFF = ${SCRIPTS_DIR}/${BOX}-poweroff

	# Keep your test kernels separate from your other kernels.
	LOCALVERSION = -test

	# The /boot/grub/menu.lst is searched for the line:
	# title Test Kernel
	# and ktest will use that kernel to reboot into.
	# For grub2 or other boot loaders, you need to set BOOT_TYPE
	# to 'script' and define other ways to load the kernel.
	# See snowball.conf example.
	#
	GRUB_MENU = Test Kernel

	# The kernel build will use this option.
	BUILD_OPTIONS = -j8

	# Keeping the log file with the output dir is convenient.
	LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log

	# Each box should have their own minum configuration
	# See min-config.conf
	MIN_CONFIG = ${CONFIG_DIR}/config-min

	# For things like randconfigs, there may be configs you find that
	# are already broken, or there may be some configs that you always
	# want set. Uncomment ADD_CONFIG and point it to the make config files
	# that set the configs you want to keep on (or off) in your build.
	# ADD_CONFIG is usually something to add configs to all machines,
	# where as, MIN_CONFIG is specific per machine.
	#ADD_CONFIG = ${THIS_DIR}/config-broken ${THIS_DIR}/config-general

	# To speed up reboots for bisects and patchcheck, instead of
	# waiting 60 seconds for the console to be idle, if this line is
	# seen in the console output, ktest will know the good kernel has
	# finished rebooting and it will be able to continue the tests.
	REBOOT_SUCCESS_LINE = ${MACHINE} login:

	# The following is different ways to end the test.
	# by setting the variable REBOOT to: none, error, fail or
	# something else, ktest will power cycle or reboot the target box
	# at the end of the tests.
	#
	# REBOOT := none
	# Don't do anything at the end of the test.
	#
	# REBOOT := error
	# Reboot the box if ktest detects an error
	#
	# REBOOT := fail
	# Do not stop on failure, and after all tests are complete
	# power off the box (for both success and error)
	# This is good to run over a weekend and you don't want to waste
	# electricity.
	#

	DEFAULTS IF ${REBOOT} == none
	REBOOT_ON_SUCCESS = 0
	REBOOT_ON_ERROR = 0
	POWEROFF_ON_ERROR = 0
	POWEROFF_ON_SUCCESS = 0

	DEFAULTS ELSE IF ${REBOOT} == error
	REBOOT_ON_SUCCESS = 0
	REBOOT_ON_ERROR = 1
	POWEROFF_ON_ERROR = 0
	POWEROFF_ON_SUCCESS = 0

	DEFAULTS ELSE IF ${REBOOT} == fail
	REBOOT_ON_SUCCESS = 0
	POWEROFF_ON_ERROR = 1
	POWEROFF_ON_SUCCESS = 1
	POWEROFF_AFTER_HALT = 120
	DIE_ON_FAILURE = 0

	# Store the failure information into this directory
	# such as the .config, dmesg, and build log.
	STORE_FAILURES = ${THIS_DIR}/failures

	DEFAULTS ELSE
	REBOOT_ON_SUCCESS = 1
	REBOOT_ON_ERROR = 1
	POWEROFF_ON_ERROR = 0
	POWEROFF_ON_SUCCESS = 0