| /* | 
 |  * SME code for cfg80211 | 
 |  * both driver SME event handling and the SME implementation | 
 |  * (for nl80211's connect() and wext) | 
 |  * | 
 |  * Copyright 2009	Johannes Berg <johannes@sipsolutions.net> | 
 |  * Copyright (C) 2009   Intel Corporation. All rights reserved. | 
 |  */ | 
 |  | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/if_arp.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/workqueue.h> | 
 | #include <linux/wireless.h> | 
 | #include <linux/export.h> | 
 | #include <net/iw_handler.h> | 
 | #include <net/cfg80211.h> | 
 | #include <net/rtnetlink.h> | 
 | #include "nl80211.h" | 
 | #include "reg.h" | 
 | #include "rdev-ops.h" | 
 |  | 
 | /* | 
 |  * Software SME in cfg80211, using auth/assoc/deauth calls to the | 
 |  * driver. This is is for implementing nl80211's connect/disconnect | 
 |  * and wireless extensions (if configured.) | 
 |  */ | 
 |  | 
 | struct cfg80211_conn { | 
 | 	struct cfg80211_connect_params params; | 
 | 	/* these are sub-states of the _CONNECTING sme_state */ | 
 | 	enum { | 
 | 		CFG80211_CONN_SCANNING, | 
 | 		CFG80211_CONN_SCAN_AGAIN, | 
 | 		CFG80211_CONN_AUTHENTICATE_NEXT, | 
 | 		CFG80211_CONN_AUTHENTICATING, | 
 | 		CFG80211_CONN_AUTH_FAILED, | 
 | 		CFG80211_CONN_ASSOCIATE_NEXT, | 
 | 		CFG80211_CONN_ASSOCIATING, | 
 | 		CFG80211_CONN_ASSOC_FAILED, | 
 | 		CFG80211_CONN_DEAUTH, | 
 | 		CFG80211_CONN_CONNECTED, | 
 | 	} state; | 
 | 	u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; | 
 | 	u8 *ie; | 
 | 	size_t ie_len; | 
 | 	bool auto_auth, prev_bssid_valid; | 
 | }; | 
 |  | 
 | static void cfg80211_sme_free(struct wireless_dev *wdev) | 
 | { | 
 | 	if (!wdev->conn) | 
 | 		return; | 
 |  | 
 | 	kfree(wdev->conn->ie); | 
 | 	kfree(wdev->conn); | 
 | 	wdev->conn = NULL; | 
 | } | 
 |  | 
 | static int cfg80211_conn_scan(struct wireless_dev *wdev) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	struct cfg80211_scan_request *request; | 
 | 	int n_channels, err; | 
 |  | 
 | 	ASSERT_RTNL(); | 
 | 	ASSERT_RDEV_LOCK(rdev); | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (rdev->scan_req) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (wdev->conn->params.channel) | 
 | 		n_channels = 1; | 
 | 	else | 
 | 		n_channels = ieee80211_get_num_supported_channels(wdev->wiphy); | 
 |  | 
 | 	request = kzalloc(sizeof(*request) + sizeof(request->ssids[0]) + | 
 | 			  sizeof(request->channels[0]) * n_channels, | 
 | 			  GFP_KERNEL); | 
 | 	if (!request) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	if (wdev->conn->params.channel) | 
 | 		request->channels[0] = wdev->conn->params.channel; | 
 | 	else { | 
 | 		int i = 0, j; | 
 | 		enum ieee80211_band band; | 
 | 		struct ieee80211_supported_band *bands; | 
 | 		struct ieee80211_channel *channel; | 
 |  | 
 | 		for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | 
 | 			bands = wdev->wiphy->bands[band]; | 
 | 			if (!bands) | 
 | 				continue; | 
 | 			for (j = 0; j < bands->n_channels; j++) { | 
 | 				channel = &bands->channels[j]; | 
 | 				if (channel->flags & IEEE80211_CHAN_DISABLED) | 
 | 					continue; | 
 | 				request->channels[i++] = channel; | 
 | 			} | 
 | 			request->rates[band] = (1 << bands->n_bitrates) - 1; | 
 | 		} | 
 | 		n_channels = i; | 
 | 	} | 
 | 	request->n_channels = n_channels; | 
 | 	request->ssids = (void *)&request->channels[n_channels]; | 
 | 	request->n_ssids = 1; | 
 |  | 
 | 	memcpy(request->ssids[0].ssid, wdev->conn->params.ssid, | 
 | 		wdev->conn->params.ssid_len); | 
 | 	request->ssids[0].ssid_len = wdev->conn->params.ssid_len; | 
 |  | 
 | 	request->wdev = wdev; | 
 | 	request->wiphy = &rdev->wiphy; | 
 | 	request->scan_start = jiffies; | 
 |  | 
 | 	rdev->scan_req = request; | 
 |  | 
 | 	err = rdev_scan(rdev, request); | 
 | 	if (!err) { | 
 | 		wdev->conn->state = CFG80211_CONN_SCANNING; | 
 | 		nl80211_send_scan_start(rdev, wdev); | 
 | 		dev_hold(wdev->netdev); | 
 | 	} else { | 
 | 		rdev->scan_req = NULL; | 
 | 		kfree(request); | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | static int cfg80211_conn_do_work(struct wireless_dev *wdev) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	struct cfg80211_connect_params *params; | 
 | 	struct cfg80211_assoc_request req = {}; | 
 | 	int err; | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (!wdev->conn) | 
 | 		return 0; | 
 |  | 
 | 	params = &wdev->conn->params; | 
 |  | 
 | 	switch (wdev->conn->state) { | 
 | 	case CFG80211_CONN_SCANNING: | 
 | 		/* didn't find it during scan ... */ | 
 | 		return -ENOENT; | 
 | 	case CFG80211_CONN_SCAN_AGAIN: | 
 | 		return cfg80211_conn_scan(wdev); | 
 | 	case CFG80211_CONN_AUTHENTICATE_NEXT: | 
 | 		BUG_ON(!rdev->ops->auth); | 
 | 		wdev->conn->state = CFG80211_CONN_AUTHENTICATING; | 
 | 		return cfg80211_mlme_auth(rdev, wdev->netdev, | 
 | 					  params->channel, params->auth_type, | 
 | 					  params->bssid, | 
 | 					  params->ssid, params->ssid_len, | 
 | 					  NULL, 0, | 
 | 					  params->key, params->key_len, | 
 | 					  params->key_idx, NULL, 0); | 
 | 	case CFG80211_CONN_AUTH_FAILED: | 
 | 		return -ENOTCONN; | 
 | 	case CFG80211_CONN_ASSOCIATE_NEXT: | 
 | 		BUG_ON(!rdev->ops->assoc); | 
 | 		wdev->conn->state = CFG80211_CONN_ASSOCIATING; | 
 | 		if (wdev->conn->prev_bssid_valid) | 
 | 			req.prev_bssid = wdev->conn->prev_bssid; | 
 | 		req.ie = params->ie; | 
 | 		req.ie_len = params->ie_len; | 
 | 		req.use_mfp = params->mfp != NL80211_MFP_NO; | 
 | 		req.crypto = params->crypto; | 
 | 		req.flags = params->flags; | 
 | 		req.ht_capa = params->ht_capa; | 
 | 		req.ht_capa_mask = params->ht_capa_mask; | 
 | 		req.vht_capa = params->vht_capa; | 
 | 		req.vht_capa_mask = params->vht_capa_mask; | 
 |  | 
 | 		err = cfg80211_mlme_assoc(rdev, wdev->netdev, params->channel, | 
 | 					  params->bssid, params->ssid, | 
 | 					  params->ssid_len, &req); | 
 | 		if (err) | 
 | 			cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, | 
 | 					     NULL, 0, | 
 | 					     WLAN_REASON_DEAUTH_LEAVING, | 
 | 					     false); | 
 | 		return err; | 
 | 	case CFG80211_CONN_ASSOC_FAILED: | 
 | 		cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, | 
 | 				     NULL, 0, | 
 | 				     WLAN_REASON_DEAUTH_LEAVING, false); | 
 | 		return -ENOTCONN; | 
 | 	case CFG80211_CONN_DEAUTH: | 
 | 		cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, | 
 | 				     NULL, 0, | 
 | 				     WLAN_REASON_DEAUTH_LEAVING, false); | 
 | 		/* free directly, disconnected event already sent */ | 
 | 		cfg80211_sme_free(wdev); | 
 | 		return 0; | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | void cfg80211_conn_work(struct work_struct *work) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = | 
 | 		container_of(work, struct cfg80211_registered_device, conn_work); | 
 | 	struct wireless_dev *wdev; | 
 | 	u8 bssid_buf[ETH_ALEN], *bssid = NULL; | 
 |  | 
 | 	rtnl_lock(); | 
 |  | 
 | 	list_for_each_entry(wdev, &rdev->wdev_list, list) { | 
 | 		if (!wdev->netdev) | 
 | 			continue; | 
 |  | 
 | 		wdev_lock(wdev); | 
 | 		if (!netif_running(wdev->netdev)) { | 
 | 			wdev_unlock(wdev); | 
 | 			continue; | 
 | 		} | 
 | 		if (!wdev->conn || | 
 | 		    wdev->conn->state == CFG80211_CONN_CONNECTED) { | 
 | 			wdev_unlock(wdev); | 
 | 			continue; | 
 | 		} | 
 | 		if (wdev->conn->params.bssid) { | 
 | 			memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN); | 
 | 			bssid = bssid_buf; | 
 | 		} | 
 | 		if (cfg80211_conn_do_work(wdev)) { | 
 | 			__cfg80211_connect_result( | 
 | 					wdev->netdev, bssid, | 
 | 					NULL, 0, NULL, 0, | 
 | 					WLAN_STATUS_UNSPECIFIED_FAILURE, | 
 | 					false, NULL); | 
 | 			cfg80211_sme_free(wdev); | 
 | 		} | 
 | 		wdev_unlock(wdev); | 
 | 	} | 
 |  | 
 | 	rtnl_unlock(); | 
 | } | 
 |  | 
 | /* Returned bss is reference counted and must be cleaned up appropriately. */ | 
 | static struct cfg80211_bss *cfg80211_get_conn_bss(struct wireless_dev *wdev) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	struct cfg80211_bss *bss; | 
 | 	u16 capa = WLAN_CAPABILITY_ESS; | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (wdev->conn->params.privacy) | 
 | 		capa |= WLAN_CAPABILITY_PRIVACY; | 
 |  | 
 | 	bss = cfg80211_get_bss(wdev->wiphy, wdev->conn->params.channel, | 
 | 			       wdev->conn->params.bssid, | 
 | 			       wdev->conn->params.ssid, | 
 | 			       wdev->conn->params.ssid_len, | 
 | 			       WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_PRIVACY, | 
 | 			       capa); | 
 | 	if (!bss) | 
 | 		return NULL; | 
 |  | 
 | 	memcpy(wdev->conn->bssid, bss->bssid, ETH_ALEN); | 
 | 	wdev->conn->params.bssid = wdev->conn->bssid; | 
 | 	wdev->conn->params.channel = bss->channel; | 
 | 	wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; | 
 | 	schedule_work(&rdev->conn_work); | 
 |  | 
 | 	return bss; | 
 | } | 
 |  | 
 | static void __cfg80211_sme_scan_done(struct net_device *dev) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	struct cfg80211_bss *bss; | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (!wdev->conn) | 
 | 		return; | 
 |  | 
 | 	if (wdev->conn->state != CFG80211_CONN_SCANNING && | 
 | 	    wdev->conn->state != CFG80211_CONN_SCAN_AGAIN) | 
 | 		return; | 
 |  | 
 | 	bss = cfg80211_get_conn_bss(wdev); | 
 | 	if (bss) | 
 | 		cfg80211_put_bss(&rdev->wiphy, bss); | 
 | 	else | 
 | 		schedule_work(&rdev->conn_work); | 
 | } | 
 |  | 
 | void cfg80211_sme_scan_done(struct net_device *dev) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 |  | 
 | 	wdev_lock(wdev); | 
 | 	__cfg80211_sme_scan_done(dev); | 
 | 	wdev_unlock(wdev); | 
 | } | 
 |  | 
 | void cfg80211_sme_rx_auth(struct wireless_dev *wdev, const u8 *buf, size_t len) | 
 | { | 
 | 	struct wiphy *wiphy = wdev->wiphy; | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); | 
 | 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf; | 
 | 	u16 status_code = le16_to_cpu(mgmt->u.auth.status_code); | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (!wdev->conn || wdev->conn->state == CFG80211_CONN_CONNECTED) | 
 | 		return; | 
 |  | 
 | 	if (status_code == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG && | 
 | 	    wdev->conn->auto_auth && | 
 | 	    wdev->conn->params.auth_type != NL80211_AUTHTYPE_NETWORK_EAP) { | 
 | 		/* select automatically between only open, shared, leap */ | 
 | 		switch (wdev->conn->params.auth_type) { | 
 | 		case NL80211_AUTHTYPE_OPEN_SYSTEM: | 
 | 			if (wdev->connect_keys) | 
 | 				wdev->conn->params.auth_type = | 
 | 					NL80211_AUTHTYPE_SHARED_KEY; | 
 | 			else | 
 | 				wdev->conn->params.auth_type = | 
 | 					NL80211_AUTHTYPE_NETWORK_EAP; | 
 | 			break; | 
 | 		case NL80211_AUTHTYPE_SHARED_KEY: | 
 | 			wdev->conn->params.auth_type = | 
 | 				NL80211_AUTHTYPE_NETWORK_EAP; | 
 | 			break; | 
 | 		default: | 
 | 			/* huh? */ | 
 | 			wdev->conn->params.auth_type = | 
 | 				NL80211_AUTHTYPE_OPEN_SYSTEM; | 
 | 			break; | 
 | 		} | 
 | 		wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; | 
 | 		schedule_work(&rdev->conn_work); | 
 | 	} else if (status_code != WLAN_STATUS_SUCCESS) { | 
 | 		__cfg80211_connect_result(wdev->netdev, mgmt->bssid, | 
 | 					  NULL, 0, NULL, 0, | 
 | 					  status_code, false, NULL); | 
 | 	} else if (wdev->conn->state == CFG80211_CONN_AUTHENTICATING) { | 
 | 		wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT; | 
 | 		schedule_work(&rdev->conn_work); | 
 | 	} | 
 | } | 
 |  | 
 | bool cfg80211_sme_rx_assoc_resp(struct wireless_dev *wdev, u16 status) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 |  | 
 | 	if (!wdev->conn) | 
 | 		return false; | 
 |  | 
 | 	if (status == WLAN_STATUS_SUCCESS) { | 
 | 		wdev->conn->state = CFG80211_CONN_CONNECTED; | 
 | 		return false; | 
 | 	} | 
 |  | 
 | 	if (wdev->conn->prev_bssid_valid) { | 
 | 		/* | 
 | 		 * Some stupid APs don't accept reassoc, so we | 
 | 		 * need to fall back to trying regular assoc; | 
 | 		 * return true so no event is sent to userspace. | 
 | 		 */ | 
 | 		wdev->conn->prev_bssid_valid = false; | 
 | 		wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT; | 
 | 		schedule_work(&rdev->conn_work); | 
 | 		return true; | 
 | 	} | 
 |  | 
 | 	wdev->conn->state = CFG80211_CONN_ASSOC_FAILED; | 
 | 	schedule_work(&rdev->conn_work); | 
 | 	return false; | 
 | } | 
 |  | 
 | void cfg80211_sme_deauth(struct wireless_dev *wdev) | 
 | { | 
 | 	cfg80211_sme_free(wdev); | 
 | } | 
 |  | 
 | void cfg80211_sme_auth_timeout(struct wireless_dev *wdev) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 |  | 
 | 	if (!wdev->conn) | 
 | 		return; | 
 |  | 
 | 	wdev->conn->state = CFG80211_CONN_AUTH_FAILED; | 
 | 	schedule_work(&rdev->conn_work); | 
 | } | 
 |  | 
 | void cfg80211_sme_disassoc(struct wireless_dev *wdev) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 |  | 
 | 	if (!wdev->conn) | 
 | 		return; | 
 |  | 
 | 	wdev->conn->state = CFG80211_CONN_DEAUTH; | 
 | 	schedule_work(&rdev->conn_work); | 
 | } | 
 |  | 
 | void cfg80211_sme_assoc_timeout(struct wireless_dev *wdev) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 |  | 
 | 	if (!wdev->conn) | 
 | 		return; | 
 |  | 
 | 	wdev->conn->state = CFG80211_CONN_ASSOC_FAILED; | 
 | 	schedule_work(&rdev->conn_work); | 
 | } | 
 |  | 
 | static int cfg80211_sme_connect(struct wireless_dev *wdev, | 
 | 				struct cfg80211_connect_params *connect, | 
 | 				const u8 *prev_bssid) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	struct cfg80211_bss *bss; | 
 | 	int err; | 
 |  | 
 | 	if (!rdev->ops->auth || !rdev->ops->assoc) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (wdev->current_bss) | 
 | 		return -EALREADY; | 
 |  | 
 | 	if (WARN_ON(wdev->conn)) | 
 | 		return -EINPROGRESS; | 
 |  | 
 | 	wdev->conn = kzalloc(sizeof(*wdev->conn), GFP_KERNEL); | 
 | 	if (!wdev->conn) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* | 
 | 	 * Copy all parameters, and treat explicitly IEs, BSSID, SSID. | 
 | 	 */ | 
 | 	memcpy(&wdev->conn->params, connect, sizeof(*connect)); | 
 | 	if (connect->bssid) { | 
 | 		wdev->conn->params.bssid = wdev->conn->bssid; | 
 | 		memcpy(wdev->conn->bssid, connect->bssid, ETH_ALEN); | 
 | 	} | 
 |  | 
 | 	if (connect->ie) { | 
 | 		wdev->conn->ie = kmemdup(connect->ie, connect->ie_len, | 
 | 					GFP_KERNEL); | 
 | 		wdev->conn->params.ie = wdev->conn->ie; | 
 | 		if (!wdev->conn->ie) { | 
 | 			kfree(wdev->conn); | 
 | 			wdev->conn = NULL; | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (connect->auth_type == NL80211_AUTHTYPE_AUTOMATIC) { | 
 | 		wdev->conn->auto_auth = true; | 
 | 		/* start with open system ... should mostly work */ | 
 | 		wdev->conn->params.auth_type = | 
 | 			NL80211_AUTHTYPE_OPEN_SYSTEM; | 
 | 	} else { | 
 | 		wdev->conn->auto_auth = false; | 
 | 	} | 
 |  | 
 | 	wdev->conn->params.ssid = wdev->ssid; | 
 | 	wdev->conn->params.ssid_len = connect->ssid_len; | 
 |  | 
 | 	/* see if we have the bss already */ | 
 | 	bss = cfg80211_get_conn_bss(wdev); | 
 |  | 
 | 	if (prev_bssid) { | 
 | 		memcpy(wdev->conn->prev_bssid, prev_bssid, ETH_ALEN); | 
 | 		wdev->conn->prev_bssid_valid = true; | 
 | 	} | 
 |  | 
 | 	/* we're good if we have a matching bss struct */ | 
 | 	if (bss) { | 
 | 		wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; | 
 | 		err = cfg80211_conn_do_work(wdev); | 
 | 		cfg80211_put_bss(wdev->wiphy, bss); | 
 | 	} else { | 
 | 		/* otherwise we'll need to scan for the AP first */ | 
 | 		err = cfg80211_conn_scan(wdev); | 
 |  | 
 | 		/* | 
 | 		 * If we can't scan right now, then we need to scan again | 
 | 		 * after the current scan finished, since the parameters | 
 | 		 * changed (unless we find a good AP anyway). | 
 | 		 */ | 
 | 		if (err == -EBUSY) { | 
 | 			err = 0; | 
 | 			wdev->conn->state = CFG80211_CONN_SCAN_AGAIN; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (err) | 
 | 		cfg80211_sme_free(wdev); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int cfg80211_sme_disconnect(struct wireless_dev *wdev, u16 reason) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	int err; | 
 |  | 
 | 	if (!wdev->conn) | 
 | 		return 0; | 
 |  | 
 | 	if (!rdev->ops->deauth) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (wdev->conn->state == CFG80211_CONN_SCANNING || | 
 | 	    wdev->conn->state == CFG80211_CONN_SCAN_AGAIN) { | 
 | 		err = 0; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* wdev->conn->params.bssid must be set if > SCANNING */ | 
 | 	err = cfg80211_mlme_deauth(rdev, wdev->netdev, | 
 | 				   wdev->conn->params.bssid, | 
 | 				   NULL, 0, reason, false); | 
 |  out: | 
 | 	cfg80211_sme_free(wdev); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * code shared for in-device and software SME | 
 |  */ | 
 |  | 
 | static bool cfg80211_is_all_idle(void) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev; | 
 | 	struct wireless_dev *wdev; | 
 | 	bool is_all_idle = true; | 
 |  | 
 | 	/* | 
 | 	 * All devices must be idle as otherwise if you are actively | 
 | 	 * scanning some new beacon hints could be learned and would | 
 | 	 * count as new regulatory hints. | 
 | 	 */ | 
 | 	list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | 
 | 		list_for_each_entry(wdev, &rdev->wdev_list, list) { | 
 | 			wdev_lock(wdev); | 
 | 			if (wdev->conn || wdev->current_bss) | 
 | 				is_all_idle = false; | 
 | 			wdev_unlock(wdev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return is_all_idle; | 
 | } | 
 |  | 
 | static void disconnect_work(struct work_struct *work) | 
 | { | 
 | 	rtnl_lock(); | 
 | 	if (cfg80211_is_all_idle()) | 
 | 		regulatory_hint_disconnect(); | 
 | 	rtnl_unlock(); | 
 | } | 
 |  | 
 | static DECLARE_WORK(cfg80211_disconnect_work, disconnect_work); | 
 |  | 
 |  | 
 | /* | 
 |  * API calls for drivers implementing connect/disconnect and | 
 |  * SME event handling | 
 |  */ | 
 |  | 
 | /* This method must consume bss one way or another */ | 
 | void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, | 
 | 			       const u8 *req_ie, size_t req_ie_len, | 
 | 			       const u8 *resp_ie, size_t resp_ie_len, | 
 | 			       u16 status, bool wextev, | 
 | 			       struct cfg80211_bss *bss) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	const u8 *country_ie; | 
 | #ifdef CONFIG_CFG80211_WEXT | 
 | 	union iwreq_data wrqu; | 
 | #endif | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && | 
 | 		    wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) { | 
 | 		cfg80211_put_bss(wdev->wiphy, bss); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	nl80211_send_connect_result(wiphy_to_dev(wdev->wiphy), dev, | 
 | 				    bssid, req_ie, req_ie_len, | 
 | 				    resp_ie, resp_ie_len, | 
 | 				    status, GFP_KERNEL); | 
 |  | 
 | #ifdef CONFIG_CFG80211_WEXT | 
 | 	if (wextev) { | 
 | 		if (req_ie && status == WLAN_STATUS_SUCCESS) { | 
 | 			memset(&wrqu, 0, sizeof(wrqu)); | 
 | 			wrqu.data.length = req_ie_len; | 
 | 			wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, req_ie); | 
 | 		} | 
 |  | 
 | 		if (resp_ie && status == WLAN_STATUS_SUCCESS) { | 
 | 			memset(&wrqu, 0, sizeof(wrqu)); | 
 | 			wrqu.data.length = resp_ie_len; | 
 | 			wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, resp_ie); | 
 | 		} | 
 |  | 
 | 		memset(&wrqu, 0, sizeof(wrqu)); | 
 | 		wrqu.ap_addr.sa_family = ARPHRD_ETHER; | 
 | 		if (bssid && status == WLAN_STATUS_SUCCESS) { | 
 | 			memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN); | 
 | 			memcpy(wdev->wext.prev_bssid, bssid, ETH_ALEN); | 
 | 			wdev->wext.prev_bssid_valid = true; | 
 | 		} | 
 | 		wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (!bss && (status == WLAN_STATUS_SUCCESS)) { | 
 | 		WARN_ON_ONCE(!wiphy_to_dev(wdev->wiphy)->ops->connect); | 
 | 		bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid, | 
 | 				       wdev->ssid, wdev->ssid_len, | 
 | 				       WLAN_CAPABILITY_ESS, | 
 | 				       WLAN_CAPABILITY_ESS); | 
 | 		if (bss) | 
 | 			cfg80211_hold_bss(bss_from_pub(bss)); | 
 | 	} | 
 |  | 
 | 	if (wdev->current_bss) { | 
 | 		cfg80211_unhold_bss(wdev->current_bss); | 
 | 		cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); | 
 | 		wdev->current_bss = NULL; | 
 | 	} | 
 |  | 
 | 	if (status != WLAN_STATUS_SUCCESS) { | 
 | 		kfree(wdev->connect_keys); | 
 | 		wdev->connect_keys = NULL; | 
 | 		wdev->ssid_len = 0; | 
 | 		if (bss) { | 
 | 			cfg80211_unhold_bss(bss_from_pub(bss)); | 
 | 			cfg80211_put_bss(wdev->wiphy, bss); | 
 | 		} | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (WARN_ON(!bss)) | 
 | 		return; | 
 |  | 
 | 	wdev->current_bss = bss_from_pub(bss); | 
 |  | 
 | 	cfg80211_upload_connect_keys(wdev); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	country_ie = ieee80211_bss_get_ie(bss, WLAN_EID_COUNTRY); | 
 | 	if (!country_ie) { | 
 | 		rcu_read_unlock(); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	country_ie = kmemdup(country_ie, 2 + country_ie[1], GFP_ATOMIC); | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	if (!country_ie) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * ieee80211_bss_get_ie() ensures we can access: | 
 | 	 * - country_ie + 2, the start of the country ie data, and | 
 | 	 * - and country_ie[1] which is the IE length | 
 | 	 */ | 
 | 	regulatory_hint_country_ie(wdev->wiphy, bss->channel->band, | 
 | 				   country_ie + 2, country_ie[1]); | 
 | 	kfree(country_ie); | 
 | } | 
 |  | 
 | void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, | 
 | 			     const u8 *req_ie, size_t req_ie_len, | 
 | 			     const u8 *resp_ie, size_t resp_ie_len, | 
 | 			     u16 status, gfp_t gfp) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	struct cfg80211_event *ev; | 
 | 	unsigned long flags; | 
 |  | 
 | 	ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp); | 
 | 	if (!ev) | 
 | 		return; | 
 |  | 
 | 	ev->type = EVENT_CONNECT_RESULT; | 
 | 	if (bssid) | 
 | 		memcpy(ev->cr.bssid, bssid, ETH_ALEN); | 
 | 	if (req_ie_len) { | 
 | 		ev->cr.req_ie = ((u8 *)ev) + sizeof(*ev); | 
 | 		ev->cr.req_ie_len = req_ie_len; | 
 | 		memcpy((void *)ev->cr.req_ie, req_ie, req_ie_len); | 
 | 	} | 
 | 	if (resp_ie_len) { | 
 | 		ev->cr.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len; | 
 | 		ev->cr.resp_ie_len = resp_ie_len; | 
 | 		memcpy((void *)ev->cr.resp_ie, resp_ie, resp_ie_len); | 
 | 	} | 
 | 	ev->cr.status = status; | 
 |  | 
 | 	spin_lock_irqsave(&wdev->event_lock, flags); | 
 | 	list_add_tail(&ev->list, &wdev->event_list); | 
 | 	spin_unlock_irqrestore(&wdev->event_lock, flags); | 
 | 	queue_work(cfg80211_wq, &rdev->event_work); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_connect_result); | 
 |  | 
 | /* Consumes bss object one way or another */ | 
 | void __cfg80211_roamed(struct wireless_dev *wdev, | 
 | 		       struct cfg80211_bss *bss, | 
 | 		       const u8 *req_ie, size_t req_ie_len, | 
 | 		       const u8 *resp_ie, size_t resp_ie_len) | 
 | { | 
 | #ifdef CONFIG_CFG80211_WEXT | 
 | 	union iwreq_data wrqu; | 
 | #endif | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && | 
 | 		    wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) | 
 | 		goto out; | 
 |  | 
 | 	if (WARN_ON(!wdev->current_bss)) | 
 | 		goto out; | 
 |  | 
 | 	cfg80211_unhold_bss(wdev->current_bss); | 
 | 	cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); | 
 | 	wdev->current_bss = NULL; | 
 |  | 
 | 	cfg80211_hold_bss(bss_from_pub(bss)); | 
 | 	wdev->current_bss = bss_from_pub(bss); | 
 |  | 
 | 	nl80211_send_roamed(wiphy_to_dev(wdev->wiphy), wdev->netdev, bss->bssid, | 
 | 			    req_ie, req_ie_len, resp_ie, resp_ie_len, | 
 | 			    GFP_KERNEL); | 
 |  | 
 | #ifdef CONFIG_CFG80211_WEXT | 
 | 	if (req_ie) { | 
 | 		memset(&wrqu, 0, sizeof(wrqu)); | 
 | 		wrqu.data.length = req_ie_len; | 
 | 		wireless_send_event(wdev->netdev, IWEVASSOCREQIE, | 
 | 				    &wrqu, req_ie); | 
 | 	} | 
 |  | 
 | 	if (resp_ie) { | 
 | 		memset(&wrqu, 0, sizeof(wrqu)); | 
 | 		wrqu.data.length = resp_ie_len; | 
 | 		wireless_send_event(wdev->netdev, IWEVASSOCRESPIE, | 
 | 				    &wrqu, resp_ie); | 
 | 	} | 
 |  | 
 | 	memset(&wrqu, 0, sizeof(wrqu)); | 
 | 	wrqu.ap_addr.sa_family = ARPHRD_ETHER; | 
 | 	memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN); | 
 | 	memcpy(wdev->wext.prev_bssid, bss->bssid, ETH_ALEN); | 
 | 	wdev->wext.prev_bssid_valid = true; | 
 | 	wireless_send_event(wdev->netdev, SIOCGIWAP, &wrqu, NULL); | 
 | #endif | 
 |  | 
 | 	return; | 
 | out: | 
 | 	cfg80211_put_bss(wdev->wiphy, bss); | 
 | } | 
 |  | 
 | void cfg80211_roamed(struct net_device *dev, | 
 | 		     struct ieee80211_channel *channel, | 
 | 		     const u8 *bssid, | 
 | 		     const u8 *req_ie, size_t req_ie_len, | 
 | 		     const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	struct cfg80211_bss *bss; | 
 |  | 
 | 	bss = cfg80211_get_bss(wdev->wiphy, channel, bssid, wdev->ssid, | 
 | 			       wdev->ssid_len, WLAN_CAPABILITY_ESS, | 
 | 			       WLAN_CAPABILITY_ESS); | 
 | 	if (WARN_ON(!bss)) | 
 | 		return; | 
 |  | 
 | 	cfg80211_roamed_bss(dev, bss, req_ie, req_ie_len, resp_ie, | 
 | 			    resp_ie_len, gfp); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_roamed); | 
 |  | 
 | /* Consumes bss object one way or another */ | 
 | void cfg80211_roamed_bss(struct net_device *dev, | 
 | 			 struct cfg80211_bss *bss, const u8 *req_ie, | 
 | 			 size_t req_ie_len, const u8 *resp_ie, | 
 | 			 size_t resp_ie_len, gfp_t gfp) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	struct cfg80211_event *ev; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (WARN_ON(!bss)) | 
 | 		return; | 
 |  | 
 | 	ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp); | 
 | 	if (!ev) { | 
 | 		cfg80211_put_bss(wdev->wiphy, bss); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ev->type = EVENT_ROAMED; | 
 | 	ev->rm.req_ie = ((u8 *)ev) + sizeof(*ev); | 
 | 	ev->rm.req_ie_len = req_ie_len; | 
 | 	memcpy((void *)ev->rm.req_ie, req_ie, req_ie_len); | 
 | 	ev->rm.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len; | 
 | 	ev->rm.resp_ie_len = resp_ie_len; | 
 | 	memcpy((void *)ev->rm.resp_ie, resp_ie, resp_ie_len); | 
 | 	ev->rm.bss = bss; | 
 |  | 
 | 	spin_lock_irqsave(&wdev->event_lock, flags); | 
 | 	list_add_tail(&ev->list, &wdev->event_list); | 
 | 	spin_unlock_irqrestore(&wdev->event_lock, flags); | 
 | 	queue_work(cfg80211_wq, &rdev->event_work); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_roamed_bss); | 
 |  | 
 | void __cfg80211_disconnected(struct net_device *dev, const u8 *ie, | 
 | 			     size_t ie_len, u16 reason, bool from_ap) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	int i; | 
 | #ifdef CONFIG_CFG80211_WEXT | 
 | 	union iwreq_data wrqu; | 
 | #endif | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && | 
 | 		    wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) | 
 | 		return; | 
 |  | 
 | 	if (wdev->current_bss) { | 
 | 		cfg80211_unhold_bss(wdev->current_bss); | 
 | 		cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); | 
 | 	} | 
 |  | 
 | 	wdev->current_bss = NULL; | 
 | 	wdev->ssid_len = 0; | 
 |  | 
 | 	nl80211_send_disconnected(rdev, dev, reason, ie, ie_len, from_ap); | 
 |  | 
 | 	/* | 
 | 	 * Delete all the keys ... pairwise keys can't really | 
 | 	 * exist any more anyway, but default keys might. | 
 | 	 */ | 
 | 	if (rdev->ops->del_key) | 
 | 		for (i = 0; i < 6; i++) | 
 | 			rdev_del_key(rdev, dev, i, false, NULL); | 
 |  | 
 | 	rdev_set_qos_map(rdev, dev, NULL); | 
 |  | 
 | #ifdef CONFIG_CFG80211_WEXT | 
 | 	memset(&wrqu, 0, sizeof(wrqu)); | 
 | 	wrqu.ap_addr.sa_family = ARPHRD_ETHER; | 
 | 	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); | 
 | 	wdev->wext.connect.ssid_len = 0; | 
 | #endif | 
 |  | 
 | 	schedule_work(&cfg80211_disconnect_work); | 
 | } | 
 |  | 
 | void cfg80211_disconnected(struct net_device *dev, u16 reason, | 
 | 			   u8 *ie, size_t ie_len, gfp_t gfp) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	struct cfg80211_event *ev; | 
 | 	unsigned long flags; | 
 |  | 
 | 	ev = kzalloc(sizeof(*ev) + ie_len, gfp); | 
 | 	if (!ev) | 
 | 		return; | 
 |  | 
 | 	ev->type = EVENT_DISCONNECTED; | 
 | 	ev->dc.ie = ((u8 *)ev) + sizeof(*ev); | 
 | 	ev->dc.ie_len = ie_len; | 
 | 	memcpy((void *)ev->dc.ie, ie, ie_len); | 
 | 	ev->dc.reason = reason; | 
 |  | 
 | 	spin_lock_irqsave(&wdev->event_lock, flags); | 
 | 	list_add_tail(&ev->list, &wdev->event_list); | 
 | 	spin_unlock_irqrestore(&wdev->event_lock, flags); | 
 | 	queue_work(cfg80211_wq, &rdev->event_work); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_disconnected); | 
 |  | 
 | /* | 
 |  * API calls for nl80211/wext compatibility code | 
 |  */ | 
 | int cfg80211_connect(struct cfg80211_registered_device *rdev, | 
 | 		     struct net_device *dev, | 
 | 		     struct cfg80211_connect_params *connect, | 
 | 		     struct cfg80211_cached_keys *connkeys, | 
 | 		     const u8 *prev_bssid) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	int err; | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (WARN_ON(wdev->connect_keys)) { | 
 | 		kfree(wdev->connect_keys); | 
 | 		wdev->connect_keys = NULL; | 
 | 	} | 
 |  | 
 | 	cfg80211_oper_and_ht_capa(&connect->ht_capa_mask, | 
 | 				  rdev->wiphy.ht_capa_mod_mask); | 
 |  | 
 | 	if (connkeys && connkeys->def >= 0) { | 
 | 		int idx; | 
 | 		u32 cipher; | 
 |  | 
 | 		idx = connkeys->def; | 
 | 		cipher = connkeys->params[idx].cipher; | 
 | 		/* If given a WEP key we may need it for shared key auth */ | 
 | 		if (cipher == WLAN_CIPHER_SUITE_WEP40 || | 
 | 		    cipher == WLAN_CIPHER_SUITE_WEP104) { | 
 | 			connect->key_idx = idx; | 
 | 			connect->key = connkeys->params[idx].key; | 
 | 			connect->key_len = connkeys->params[idx].key_len; | 
 |  | 
 | 			/* | 
 | 			 * If ciphers are not set (e.g. when going through | 
 | 			 * iwconfig), we have to set them appropriately here. | 
 | 			 */ | 
 | 			if (connect->crypto.cipher_group == 0) | 
 | 				connect->crypto.cipher_group = cipher; | 
 |  | 
 | 			if (connect->crypto.n_ciphers_pairwise == 0) { | 
 | 				connect->crypto.n_ciphers_pairwise = 1; | 
 | 				connect->crypto.ciphers_pairwise[0] = cipher; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	wdev->connect_keys = connkeys; | 
 | 	memcpy(wdev->ssid, connect->ssid, connect->ssid_len); | 
 | 	wdev->ssid_len = connect->ssid_len; | 
 |  | 
 | 	if (!rdev->ops->connect) | 
 | 		err = cfg80211_sme_connect(wdev, connect, prev_bssid); | 
 | 	else | 
 | 		err = rdev_connect(rdev, dev, connect); | 
 |  | 
 | 	if (err) { | 
 | 		wdev->connect_keys = NULL; | 
 | 		wdev->ssid_len = 0; | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int cfg80211_disconnect(struct cfg80211_registered_device *rdev, | 
 | 			struct net_device *dev, u16 reason, bool wextev) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	int err = 0; | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	kfree(wdev->connect_keys); | 
 | 	wdev->connect_keys = NULL; | 
 |  | 
 | 	if (wdev->conn) | 
 | 		err = cfg80211_sme_disconnect(wdev, reason); | 
 | 	else if (!rdev->ops->disconnect) | 
 | 		cfg80211_mlme_down(rdev, dev); | 
 | 	else if (wdev->current_bss) | 
 | 		err = rdev_disconnect(rdev, dev, reason); | 
 |  | 
 | 	return err; | 
 | } |