| /* |
| * Copyright (C) 2003 - 2009 NetXen, Inc. |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, |
| * MA 02111-1307, USA. |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE. |
| * |
| * Contact Information: |
| * info@netxen.com |
| * NetXen Inc, |
| * 18922 Forge Drive |
| * Cupertino, CA 95014-0701 |
| * |
| */ |
| |
| #include "netxen_nic.h" |
| |
| /* |
| * netxen_niu_gbe_phy_read - read a register from the GbE PHY via |
| * mii management interface. |
| * |
| * Note: The MII management interface goes through port 0. |
| * Individual phys are addressed as follows: |
| * @param phy [15:8] phy id |
| * @param reg [7:0] register number |
| * |
| * @returns 0 on success |
| * -1 on error |
| * |
| */ |
| int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg, |
| __u32 * readval) |
| { |
| long timeout = 0; |
| long result = 0; |
| long restore = 0; |
| long phy = adapter->physical_port; |
| __u32 address; |
| __u32 command; |
| __u32 status; |
| __u32 mac_cfg0; |
| |
| if (netxen_phy_lock(adapter) != 0) |
| return -1; |
| |
| /* |
| * MII mgmt all goes through port 0 MAC interface, |
| * so it cannot be in reset |
| */ |
| |
| mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0)); |
| if (netxen_gb_get_soft_reset(mac_cfg0)) { |
| __u32 temp; |
| temp = 0; |
| netxen_gb_tx_reset_pb(temp); |
| netxen_gb_rx_reset_pb(temp); |
| netxen_gb_tx_reset_mac(temp); |
| netxen_gb_rx_reset_mac(temp); |
| if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp)) |
| return -EIO; |
| restore = 1; |
| } |
| |
| address = 0; |
| netxen_gb_mii_mgmt_reg_addr(address, reg); |
| netxen_gb_mii_mgmt_phy_addr(address, phy); |
| if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address)) |
| return -EIO; |
| command = 0; /* turn off any prior activity */ |
| if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command)) |
| return -EIO; |
| /* send read command */ |
| netxen_gb_mii_mgmt_set_read_cycle(command); |
| if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command)) |
| return -EIO; |
| |
| status = 0; |
| do { |
| status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0)); |
| timeout++; |
| } while ((netxen_get_gb_mii_mgmt_busy(status) |
| || netxen_get_gb_mii_mgmt_notvalid(status)) |
| && (timeout++ < NETXEN_NIU_PHY_WAITMAX)); |
| |
| if (timeout < NETXEN_NIU_PHY_WAITMAX) { |
| *readval = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_STATUS(0)); |
| result = 0; |
| } else |
| result = -1; |
| |
| if (restore) |
| if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0)) |
| return -EIO; |
| netxen_phy_unlock(adapter); |
| return result; |
| } |
| |
| /* |
| * netxen_niu_gbe_phy_write - write a register to the GbE PHY via |
| * mii management interface. |
| * |
| * Note: The MII management interface goes through port 0. |
| * Individual phys are addressed as follows: |
| * @param phy [15:8] phy id |
| * @param reg [7:0] register number |
| * |
| * @returns 0 on success |
| * -1 on error |
| * |
| */ |
| int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg, |
| __u32 val) |
| { |
| long timeout = 0; |
| long result = 0; |
| long restore = 0; |
| long phy = adapter->physical_port; |
| __u32 address; |
| __u32 command; |
| __u32 status; |
| __u32 mac_cfg0; |
| |
| /* |
| * MII mgmt all goes through port 0 MAC interface, so it |
| * cannot be in reset |
| */ |
| |
| mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0)); |
| if (netxen_gb_get_soft_reset(mac_cfg0)) { |
| __u32 temp; |
| temp = 0; |
| netxen_gb_tx_reset_pb(temp); |
| netxen_gb_rx_reset_pb(temp); |
| netxen_gb_tx_reset_mac(temp); |
| netxen_gb_rx_reset_mac(temp); |
| |
| if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp)) |
| return -EIO; |
| restore = 1; |
| } |
| |
| command = 0; /* turn off any prior activity */ |
| if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command)) |
| return -EIO; |
| |
| address = 0; |
| netxen_gb_mii_mgmt_reg_addr(address, reg); |
| netxen_gb_mii_mgmt_phy_addr(address, phy); |
| if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address)) |
| return -EIO; |
| |
| if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0), val)) |
| return -EIO; |
| |
| status = 0; |
| do { |
| status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0)); |
| timeout++; |
| } while ((netxen_get_gb_mii_mgmt_busy(status)) |
| && (timeout++ < NETXEN_NIU_PHY_WAITMAX)); |
| |
| if (timeout < NETXEN_NIU_PHY_WAITMAX) |
| result = 0; |
| else |
| result = -EIO; |
| |
| /* restore the state of port 0 MAC in case we tampered with it */ |
| if (restore) |
| if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0)) |
| return -EIO; |
| |
| return result; |
| } |
| |
| int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port) |
| { |
| if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) { |
| NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447); |
| NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5); |
| } |
| |
| return 0; |
| } |
| |
| /* Disable an XG interface */ |
| int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) |
| { |
| __u32 mac_cfg; |
| u32 port = adapter->physical_port; |
| |
| if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) |
| return 0; |
| |
| if (port > NETXEN_NIU_MAX_XG_PORTS) |
| return -EINVAL; |
| |
| mac_cfg = 0; |
| if (NXWR32(adapter, |
| NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg)) |
| return -EIO; |
| return 0; |
| } |
| |
| int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, |
| u32 mode) |
| { |
| __u32 reg; |
| u32 port = adapter->physical_port; |
| |
| if (port > NETXEN_NIU_MAX_XG_PORTS) |
| return -EINVAL; |
| |
| reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port)); |
| if (mode == NETXEN_NIU_PROMISC_MODE) |
| reg = (reg | 0x2000UL); |
| else |
| reg = (reg & ~0x2000UL); |
| |
| if (mode == NETXEN_NIU_ALLMULTI_MODE) |
| reg = (reg | 0x1000UL); |
| else |
| reg = (reg & ~0x1000UL); |
| |
| NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg); |
| |
| return 0; |
| } |
| |
| int netxen_p2_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr) |
| { |
| u32 mac_hi, mac_lo; |
| u32 reg_hi, reg_lo; |
| |
| u8 phy = adapter->physical_port; |
| u8 phy_count = (adapter->ahw.port_type == NETXEN_NIC_XGBE) ? |
| NETXEN_NIU_MAX_XG_PORTS : NETXEN_NIU_MAX_GBE_PORTS; |
| |
| if (phy >= phy_count) |
| return -EINVAL; |
| |
| mac_lo = ((u32)addr[0] << 16) | ((u32)addr[1] << 24); |
| mac_hi = addr[2] | ((u32)addr[3] << 8) | |
| ((u32)addr[4] << 16) | ((u32)addr[5] << 24); |
| |
| if (adapter->ahw.port_type == NETXEN_NIC_XGBE) { |
| reg_lo = NETXEN_NIU_XGE_STATION_ADDR_0_1 + (0x10000 * phy); |
| reg_hi = NETXEN_NIU_XGE_STATION_ADDR_0_HI + (0x10000 * phy); |
| } else { |
| reg_lo = NETXEN_NIU_GB_STATION_ADDR_1(phy); |
| reg_hi = NETXEN_NIU_GB_STATION_ADDR_0(phy); |
| } |
| |
| /* write twice to flush */ |
| if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi)) |
| return -EIO; |
| if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi)) |
| return -EIO; |
| |
| return 0; |
| } |