blob: d471cc5efa949bbb67c4227a74b7d3e77815ab81 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
aliases {
crypto = &crypto;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
rtc1 = &ftm_alarm0;
serial0 = &lpuart0;
serial1 = &lpuart1;
serial2 = &lpuart2;
serial3 = &lpuart3;
serial4 = &lpuart4;
serial5 = &lpuart5;
sysclk = &sysclk;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf00>;
clocks = <&clockgen 1 0>;
#cooling-cells = <2>;
};
cpu1: cpu@f01 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf01>;
clocks = <&clockgen 1 0>;
#cooling-cells = <2>;
};
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x0>;
};
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "sysclk";
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>;
};
reboot {
compatible = "syscon-reboot";
regmap = <&dcfg>;
offset = <0xb0>;
mask = <0x02>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
device_type = "soc";
interrupt-parent = <&gic>;
ranges;
ddr: memory-controller@1080000 {
compatible = "fsl,qoriq-memory-controller";
reg = <0x0 0x1080000 0x0 0x1000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
};
gic: interrupt-controller@1400000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x1401000 0x0 0x1000>,
<0x0 0x1402000 0x0 0x2000>,
<0x0 0x1404000 0x0 0x2000>,
<0x0 0x1406000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
msi1: msi-controller@1570e00 {
compatible = "fsl,ls1021a-msi";
reg = <0x0 0x1570e00 0x0 0x8>;
msi-controller;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
};
msi2: msi-controller@1570e08 {
compatible = "fsl,ls1021a-msi";
reg = <0x0 0x1570e08 0x0 0x8>;
msi-controller;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
};
ifc: memory-controller@1530000 {
compatible = "fsl,ifc";
reg = <0x0 0x1530000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sfp: efuse@1e80000 {
compatible = "fsl,ls1021a-sfp";
reg = <0x0 0x1e80000 0x0 0x10000>;
clocks = <&clockgen 4 3>;
clock-names = "sfp";
};
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x1550000 0x0 0x10000>,
<0x0 0x40000000 0x0 0x20000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
status = "disabled";
};
esdhc: esdhc@1560000 {
compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
bus-width = <4>;
status = "disabled";
};
sata: sata@3200000 {
compatible = "fsl,ls1021a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
<0x0 0x20220520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
dma-coherent;
status = "disabled";
};
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1570000 0x10000>;
extirq: interrupt-controller@1ac {
compatible = "fsl,ls1021a-extirq";
#interrupt-cells = <2>;
#address-cells = <0>;
interrupt-controller;
reg = <0x1ac 4>;
interrupt-map =
<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0x7 0x0>;
};
};
crypto: crypto@1700000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
fsl,sec-era = <7>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x1700000 0x0 0x100000>;
ranges = <0x0 0x0 0x1700000 0x100000>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
};
};
clockgen: clocking@1ee1000 {
compatible = "fsl,ls1021a-clockgen";
reg = <0x0 0x1ee1000 0x0 0x1000>;
#clock-cells = <2>;
clocks = <&sysclk>;
};
tmu: tmu@1f00000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
fsl,tmu-calibration = <0x00000000 0x00000020>,
<0x00000001 0x00000024>,
<0x00000002 0x0000002a>,
<0x00000003 0x00000032>,
<0x00000004 0x00000038>,
<0x00000005 0x0000003e>,
<0x00000006 0x00000043>,
<0x00000007 0x0000004a>,
<0x00000008 0x00000050>,
<0x00000009 0x00000059>,
<0x0000000a 0x0000005f>,
<0x0000000b 0x00000066>,
<0x00010000 0x00000023>,
<0x00010001 0x0000002b>,
<0x00010002 0x00000033>,
<0x00010003 0x0000003a>,
<0x00010004 0x00000042>,
<0x00010005 0x0000004a>,
<0x00010006 0x00000054>,
<0x00010007 0x0000005c>,
<0x00010008 0x00000065>,
<0x00010009 0x0000006f>,
<0x00020000 0x00000029>,
<0x00020001 0x00000033>,
<0x00020002 0x0000003d>,
<0x00020003 0x00000048>,
<0x00020004 0x00000054>,
<0x00020005 0x00000060>,
<0x00020006 0x0000006c>,
<0x00030000 0x00000025>,
<0x00030001 0x00000033>,
<0x00030002 0x00000043>,
<0x00030003 0x00000055>;
#thermal-sensor-cells = <1>;
};
dspi0: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
spi-num-chipselects = <6>;
big-endian;
status = "disabled";
};
dspi1: spi@2110000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
spi-num-chipselects = <6>;
big-endian;
status = "disabled";
};
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
dma-names = "rx", "tx";
dmas = <&edma0 1 38>, <&edma0 1 39>;
status = "disabled";
};
i2c1: i2c@2190000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
dma-names = "rx", "tx";
dmas = <&edma0 1 36>, <&edma0 1 37>;
status = "disabled";
};
i2c2: i2c@21a0000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
dma-names = "rx", "tx";
dmas = <&edma0 1 34>, <&edma0 1 35>;
status = "disabled";
};
uart0: serial@21c0500 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
uart1: serial@21c0600 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
uart2: serial@21d0500 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
uart3: serial@21d0600 {
compatible = "fsl,16550-FIFO64", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
status = "disabled";
};
counter0: counter@29d0000 {
compatible = "fsl,ftm-quaddec";
reg = <0x0 0x29d0000 0x0 0x10000>;
big-endian;
status = "disabled";
};
counter1: counter@29e0000 {
compatible = "fsl,ftm-quaddec";
reg = <0x0 0x29e0000 0x0 0x10000>;
big-endian;
status = "disabled";
};
counter2: counter@29f0000 {
compatible = "fsl,ftm-quaddec";
reg = <0x0 0x29f0000 0x0 0x10000>;
big-endian;
status = "disabled";
};
counter3: counter@2a00000 {
compatible = "fsl,ftm-quaddec";
reg = <0x0 0x2a00000 0x0 0x10000>;
big-endian;
status = "disabled";
};
gpio0: gpio@2300000 {
compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@2310000 {
compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@2320000 {
compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@2330000 {
compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
lpuart0: serial@2950000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sysclk>;
clock-names = "ipg";
status = "disabled";
};
lpuart1: serial@2960000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart2: serial@2970000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart3: serial@2980000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart4: serial@2990000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart5: serial@29a0000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
pwm0: pwm@29d0000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x29d0000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
status = "disabled";
};
pwm1: pwm@29e0000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x29e0000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
status = "disabled";
};
pwm2: pwm@29f0000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x29f0000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
status = "disabled";
};
pwm3: pwm@2a00000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2a00000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
status = "disabled";
};
pwm4: pwm@2a10000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2a10000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
status = "disabled";
};
pwm5: pwm@2a20000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2a20000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
status = "disabled";
};
pwm6: pwm@2a30000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2a30000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
status = "disabled";
};
pwm7: pwm@2a40000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2a40000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
status = "disabled";
};
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "wdog-en";
big-endian;
};
sai1: sai@2b50000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b50000 0x0 0x10000>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 47>,
<&edma0 1 46>;
status = "disabled";
};
sai2: sai@2b60000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b60000 0x0 0x10000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 45>,
<&edma0 1 44>;
status = "disabled";
};
edma0: dma-controller@2c00000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x0 0x2c00000 0x0 0x10000>,
<0x0 0x2c10000 0x0 0x10000>,
<0x0 0x2c20000 0x0 0x10000>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
clocks = <&clockgen 4 1>,
<&clockgen 4 1>;
};
dcu: dcu@2ce0000 {
compatible = "fsl,ls1021a-dcu";
reg = <0x0 0x2ce0000 0x0 0x10000>;
interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 0>,
<&clockgen 4 0>;
clock-names = "dcu", "pix";
big-endian;
status = "disabled";
};
mdio0: mdio@2d24000 {
compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2d24000 0x0 0x4000>,
<0x0 0x2d10030 0x0 0x4>;
};
mdio1: mdio@2d64000 {
compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2d64000 0x0 0x4000>,
<0x0 0x2d50030 0x0 0x4>;
};
ptp_clock@2d10e00 {
compatible = "fsl,etsec-ptp";
reg = <0x0 0x2d10e00 0x0 0xb0>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
fsl,tclk-period = <5>;
fsl,tmr-prsc = <2>;
fsl,tmr-add = <0xaaaaaaab>;
fsl,tmr-fiper1 = <999999995>;
fsl,tmr-fiper2 = <999999995>;
fsl,max-adj = <499999999>;
fsl,extts-fifo;
};
enet0: ethernet@2d10000 {
compatible = "fsl,etsec2";
device_type = "network";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
model = "eTSEC";
fsl,magic-packet;
ranges;
dma-coherent;
queue-group@2d10000 {
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x2d10000 0x0 0x1000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
};
queue-group@2d14000 {
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x2d14000 0x0 0x1000>;
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
};
};
enet1: ethernet@2d50000 {
compatible = "fsl,etsec2";
device_type = "network";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
model = "eTSEC";
ranges;
dma-coherent;
queue-group@2d50000 {
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x2d50000 0x0 0x1000>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
};
queue-group@2d54000 {
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x2d54000 0x0 0x1000>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
};
};
enet2: ethernet@2d90000 {
compatible = "fsl,etsec2";
device_type = "network";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
model = "eTSEC";
ranges;
dma-coherent;
queue-group@2d90000 {
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x2d90000 0x0 0x1000>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
};
queue-group@2d94000 {
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x2d94000 0x0 0x1000>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
};
};
usb2: usb@8600000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
reg = <0x0 0x8600000 0x0 0x1000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
phy_type = "ulpi";
};
usb3: usb@3100000 {
compatible = "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
pcie@3400000 {
compatible = "fsl,ls1021a-pcie";
reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
fsl,pcie-scfg = <&scfg 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
<0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
msi-parent = <&msi1>, <&msi2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
pcie@3500000 {
compatible = "fsl,ls1021a-pcie";
reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
<0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
fsl,pcie-scfg = <&scfg 1>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
<0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
msi-parent = <&msi1>, <&msi2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
can0: can@2a70000 {
compatible = "fsl,ls1021ar2-flexcan";
reg = <0x0 0x2a70000 0x0 0x1000>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "ipg", "per";
big-endian;
status = "disabled";
};
can1: can@2a80000 {
compatible = "fsl,ls1021ar2-flexcan";
reg = <0x0 0x2a80000 0x0 0x1000>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "ipg", "per";
big-endian;
status = "disabled";
};
can2: can@2a90000 {
compatible = "fsl,ls1021ar2-flexcan";
reg = <0x0 0x2a90000 0x0 0x1000>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "ipg", "per";
big-endian;
status = "disabled";
};
can3: can@2aa0000 {
compatible = "fsl,ls1021ar2-flexcan";
reg = <0x0 0x2aa0000 0x0 0x1000>;
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "ipg", "per";
big-endian;
status = "disabled";
};
ocram1: sram@10000000 {
compatible = "mmio-sram";
reg = <0x0 0x10000000 0x0 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x10000000 0x10000>;
};
ocram2: sram@10010000 {
compatible = "mmio-sram";
reg = <0x0 0x10010000 0x0 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x10010000 0x10000>;
};
qdma: dma-controller@8390000 {
compatible = "fsl,ls1021a-qdma";
reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
<0x0 0x8389000 0x0 0x1000>, /* Status regs */
<0x0 0x838a000 0x0 0x2000>; /* Block regs */
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "qdma-error",
"qdma-queue0", "qdma-queue1";
#dma-cells = <2>;
dma-channels = <8>;
block-number = <1>;
block-offset = <0x1000>;
fsl,dma-queues = <2>;
status-sizes = <64>;
queue-sizes = <64 64>;
big-endian;
};
rcpm: power-controller@1ee2140 {
compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1ee2140 0x0 0x8>;
#fsl,rcpm-wakeup-cells = <2>;
#power-domain-cells = <0>;
};
ftm_alarm0: timer0@29d0000 {
compatible = "fsl,ls1021a-ftm-alarm";
reg = <0x0 0x29d0000 0x0 0x10000>;
reg-names = "ftm";
fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
};
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert: cpu-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
};
};
};
};