arch/arm/mach-omap2/voltage.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * OMAP3/OMAP4 Voltage Management Routines
 *
 * Author: Thara Gopinath	<thara@ti.com>
 *
 * Copyright (C) 2007 Texas Instruments, Inc.
 * Rajendra Nayak <rnayak@ti.com>
 * Lesly A M <x0080970@ti.com>
 *
 * Copyright (C) 2008, 2011 Nokia Corporation
 * Kalle Jokiniemi
 * Paul Walmsley
 *
 * Copyright (C) 2010 Texas Instruments, Inc.
 * Thara Gopinath <thara@ti.com>
 */

#include <linux/delay.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
#include <linux/clk.h>

#include "common.h"

#include "prm-regbits-34xx.h"
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
#include "prcm44xx.h"
#include "prminst44xx.h"
#include "control.h"

#include "voltage.h"
#include "powerdomain.h"

#include "vc.h"
#include "vp.h"

static LIST_HEAD(voltdm_list);

/* Public functions */
/**
 * voltdm_get_voltage() - Gets the current non-auto-compensated voltage
 * @voltdm:	pointer to the voltdm for which current voltage info is needed
 *
 * API to get the current non-auto-compensated voltage for a voltage domain.
 * Returns 0 in case of error else returns the current voltage.
 */
unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
{
	if (!voltdm || IS_ERR(voltdm)) {
		pr_warn("%s: VDD specified does not exist!\n", __func__);
		return 0;
	}

	return voltdm->nominal_volt;
}

/**
 * voltdm_scale() - API to scale voltage of a particular voltage domain.
 * @voltdm: pointer to the voltage domain which is to be scaled.
 * @target_volt: The target voltage of the voltage domain
 *
 * This API should be called by the kernel to do the voltage scaling
 * for a particular voltage domain during DVFS.
 */
static int voltdm_scale(struct voltagedomain *voltdm,
		 unsigned long target_volt)
{
	int ret, i;
	unsigned long volt = 0;

	if (!voltdm || IS_ERR(voltdm)) {
		pr_warn("%s: VDD specified does not exist!\n", __func__);
		return -EINVAL;
	}

	if (!voltdm->scale) {
		pr_err("%s: No voltage scale API registered for vdd_%s\n",
			__func__, voltdm->name);
		return -ENODATA;
	}

	if (!voltdm->volt_data) {
		pr_err("%s: No voltage data defined for vdd_%s\n",
			__func__, voltdm->name);
		return -ENODATA;
	}

	/* Adjust voltage to the exact voltage from the OPP table */
	for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
		if (voltdm->volt_data[i].volt_nominal >= target_volt) {
			volt = voltdm->volt_data[i].volt_nominal;
			break;
		}
	}

	if (!volt) {
		pr_warn("%s: not scaling. OPP voltage for %lu, not found.\n",
			__func__, target_volt);
		return -EINVAL;
	}

	ret = voltdm->scale(voltdm, volt);
	if (!ret)
		voltdm->nominal_volt = volt;

	return ret;
}

/**
 * voltdm_reset() - Resets the voltage of a particular voltage domain
 *		    to that of the current OPP.
 * @voltdm: pointer to the voltage domain whose voltage is to be reset.
 *
 * This API finds out the correct voltage the voltage domain is supposed
 * to be at and resets the voltage to that level. Should be used especially
 * while disabling any voltage compensation modules.
 */
void voltdm_reset(struct voltagedomain *voltdm)
{
	unsigned long target_volt;

	if (!voltdm || IS_ERR(voltdm)) {
		pr_warn("%s: VDD specified does not exist!\n", __func__);
		return;
	}

	target_volt = voltdm_get_voltage(voltdm);
	if (!target_volt) {
		pr_err("%s: unable to find current voltage for vdd_%s\n",
			__func__, voltdm->name);
		return;
	}

	voltdm_scale(voltdm, target_volt);
}

/**
 * omap_voltage_get_volttable() - API to get the voltage table associated with a
 *				particular voltage domain.
 * @voltdm:	pointer to the VDD for which the voltage table is required
 * @volt_data:	the voltage table for the particular vdd which is to be
 *		populated by this API
 *
 * This API populates the voltage table associated with a VDD into the
 * passed parameter pointer. Returns the count of distinct voltages
 * supported by this vdd.
 *
 */
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
				struct omap_volt_data **volt_data)
{
	if (!voltdm || IS_ERR(voltdm)) {
		pr_warn("%s: VDD specified does not exist!\n", __func__);
		return;
	}

	*volt_data = voltdm->volt_data;
}

/**
 * omap_voltage_get_voltdata() - API to get the voltage table entry for a
 *				particular voltage
 * @voltdm:	pointer to the VDD whose voltage table has to be searched
 * @volt:	the voltage to be searched in the voltage table
 *
 * This API searches through the voltage table for the required voltage
 * domain and tries to find a matching entry for the passed voltage volt.
 * If a matching entry is found volt_data is populated with that entry.
 * This API searches only through the non-compensated voltages int the
 * voltage table.
 * Returns pointer to the voltage table entry corresponding to volt on
 * success. Returns -ENODATA if no voltage table exisits for the passed voltage
 * domain or if there is no matching entry.
 */
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
						 unsigned long volt)
{
	int i;

	if (!voltdm || IS_ERR(voltdm)) {
		pr_warn("%s: VDD specified does not exist!\n", __func__);
		return ERR_PTR(-EINVAL);
	}

	if (!voltdm->volt_data) {
		pr_warn("%s: voltage table does not exist for vdd_%s\n",
			__func__, voltdm->name);
		return ERR_PTR(-ENODATA);
	}

	for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
		if (voltdm->volt_data[i].volt_nominal == volt)
			return &voltdm->volt_data[i];
	}

	pr_notice("%s: Unable to match the current voltage with the voltage table for vdd_%s\n",
		  __func__, voltdm->name);

	return ERR_PTR(-ENODATA);
}

/**
 * omap_voltage_register_pmic() - API to register PMIC specific data
 * @voltdm:	pointer to the VDD for which the PMIC specific data is
 *		to be registered
 * @pmic:	the structure containing pmic info
 *
 * This API is to be called by the SOC/PMIC file to specify the
 * pmic specific info as present in omap_voltdm_pmic structure.
 */
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
			       struct omap_voltdm_pmic *pmic)
{
	if (!voltdm || IS_ERR(voltdm)) {
		pr_warn("%s: VDD specified does not exist!\n", __func__);
		return -EINVAL;
	}

	voltdm->pmic = pmic;

	return 0;
}

/**
 * omap_voltage_late_init() - Init the various voltage parameters
 *
 * This API is to be called in the later stages of the
 * system boot to init the voltage controller and
 * voltage processors.
 */
int __init omap_voltage_late_init(void)
{
	struct voltagedomain *voltdm;

	if (list_empty(&voltdm_list)) {
		pr_err("%s: Voltage driver support not added\n",
			__func__);
		return -EINVAL;
	}

	list_for_each_entry(voltdm, &voltdm_list, node) {
		struct clk *sys_ck;

		if (!voltdm->scalable)
			continue;

		sys_ck = clk_get(NULL, voltdm->sys_clk.name);
		if (IS_ERR(sys_ck)) {
			pr_warn("%s: Could not get sys clk.\n", __func__);
			return -EINVAL;
		}
		voltdm->sys_clk.rate = clk_get_rate(sys_ck);
		WARN_ON(!voltdm->sys_clk.rate);
		clk_put(sys_ck);

		if (voltdm->vc) {
			voltdm->scale = omap_vc_bypass_scale;
			omap_vc_init_channel(voltdm);
		}

		if (voltdm->vp) {
			voltdm->scale = omap_vp_forceupdate_scale;
			omap_vp_init(voltdm);
		}
	}

	return 0;
}

static struct voltagedomain *_voltdm_lookup(const char *name)
{
	struct voltagedomain *voltdm, *temp_voltdm;

	voltdm = NULL;

	list_for_each_entry(temp_voltdm, &voltdm_list, node) {
		if (!strcmp(name, temp_voltdm->name)) {
			voltdm = temp_voltdm;
			break;
		}
	}

	return voltdm;
}

static int _voltdm_register(struct voltagedomain *voltdm)
{
	if (!voltdm || !voltdm->name)
		return -EINVAL;

	list_add(&voltdm->node, &voltdm_list);

	pr_debug("voltagedomain: registered %s\n", voltdm->name);

	return 0;
}

/**
 * voltdm_lookup - look up a voltagedomain by name, return a pointer
 * @name: name of voltagedomain
 *
 * Find a registered voltagedomain by its name @name.  Returns a pointer
 * to the struct voltagedomain if found, or NULL otherwise.
 */
struct voltagedomain *voltdm_lookup(const char *name)
{
	struct voltagedomain *voltdm ;

	if (!name)
		return NULL;

	voltdm = _voltdm_lookup(name);

	return voltdm;
}

/**
 * voltdm_init - set up the voltagedomain layer
 * @voltdm_list: array of struct voltagedomain pointers to register
 *
 * Loop through the array of voltagedomains @voltdm_list, registering all
 * that are available on the current CPU. If voltdm_list is supplied
 * and not null, all of the referenced voltagedomains will be
 * registered.  No return value.
 */
void voltdm_init(struct voltagedomain **voltdms)
{
	struct voltagedomain **v;

	if (voltdms) {
		for (v = voltdms; *v; v++)
			_voltdm_register(*v);
	}
}