Google Git
Sign in
android-kvm / linux / c9bf296b6467968ecb9d988e7ed754a19c2e63d9 / . / drivers / media / video / usbvision / usbvision-video.c
blob: af33653f0db8a18b22097785b50ed7f06cdc75a8 [file] [log] [blame]
/*
* USB USBVISION Video device driver 0.9.9
*
*
*
* Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
*
* This module is part of usbvision driver project.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Let's call the version 0.... until compression decoding is completely
* implemented.
*
* This driver is written by Jose Ignacio Gijon and Joerg Heckenbach.
* It was based on USB CPiA driver written by Peter Pregler,
* Scott J. Bertin and Johannes Erdfelt
* Ideas are taken from bttv driver by Ralph Metzler, Marcus Metzler &
* Gerd Knorr and zoran 36120/36125 driver by Pauline Middelink
* Updates to driver completed by Dwaine P. Garden
*
*
* TODO:
* - use submit_urb for all setup packets
* - Fix memory settings for nt1004. It is 4 times as big as the
* nt1003 memory.
* - Add audio on endpoint 3 for nt1004 chip. Seems impossible, needs a codec interface. Which one?
* - Clean up the driver.
* - optimization for performance.
* - Add Videotext capability (VBI). Working on it.....
* - Check audio for other devices
*
*/
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/utsname.h>
#include <linux/highmem.h>
#include <linux/smp_lock.h>
#include <linux/videodev.h>
#include <linux/vmalloc.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <asm/io.h>
#include <linux/videodev2.h>
#include <linux/video_decoder.h>
#include <linux/i2c.h>
#include <media/saa7115.h>
#include <media/v4l2-common.h>
#include <media/tuner.h>
#include <media/audiochip.h>
#include <linux/moduleparam.h>
#include <linux/workqueue.h>
#ifdef CONFIG_KMOD
#include <linux/kmod.h>
#endif
#include "usbvision.h"
#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>, Dwaine Garden <DwaineGarden@rogers.com>"
#define DRIVER_NAME "usbvision"
#define DRIVER_ALIAS "USBVision"
#define DRIVER_DESC "USBVision USB Video Device Driver for Linux"
#define DRIVER_LICENSE "GPL"
#define USBVISION_DRIVER_VERSION_MAJOR 0
#define USBVISION_DRIVER_VERSION_MINOR 9
#define USBVISION_DRIVER_VERSION_PATCHLEVEL 9
#define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,USBVISION_DRIVER_VERSION_MINOR,USBVISION_DRIVER_VERSION_PATCHLEVEL)
#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR) "." __stringify(USBVISION_DRIVER_VERSION_MINOR) "." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL)
#define ENABLE_HEXDUMP 0 /* Enable if you need it */
#ifdef USBVISION_DEBUG
#define PDEBUG(level, fmt, args...) \
if (video_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args)
#else
#define PDEBUG(level, fmt, args...) do {} while(0)
#endif
#define DBG_IOCTL 1<<0
#define DBG_IO 1<<1
#define DBG_PROBE 1<<2
#define DBG_MMAP 1<<3
//String operations
#define rmspace(str) while(*str==' ') str++;
#define goto2next(str) while(*str!=' ') str++; while(*str==' ') str++;
static int usbvision_nr = 0; // sequential number of usbvision device
static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
{ 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" },
{ 1, 2, 16, V4L2_PIX_FMT_RGB565 , "RGB565" },
{ 1, 3, 24, V4L2_PIX_FMT_RGB24 , "RGB24" },
{ 1, 4, 32, V4L2_PIX_FMT_RGB32 , "RGB32" },
{ 1, 2, 16, V4L2_PIX_FMT_RGB555 , "RGB555" },
{ 1, 2, 16, V4L2_PIX_FMT_YUYV , "YUV422" },
{ 1, 2, 12, V4L2_PIX_FMT_YVU420 , "YUV420P" }, // 1.5 !
{ 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
};
/* supported tv norms */
static struct usbvision_tvnorm tvnorms[] = {
{
.name = "PAL",
.id = V4L2_STD_PAL,
}, {
.name = "NTSC",
.id = V4L2_STD_NTSC,
}, {
.name = "SECAM",
.id = V4L2_STD_SECAM,
}, {
.name = "PAL-M",
.id = V4L2_STD_PAL_M,
}
};
#define TVNORMS ARRAY_SIZE(tvnorms)
// Function prototypes
static void usbvision_release(struct usb_usbvision *usbvision);
// Default initalization of device driver parameters
static int isocMode = ISOC_MODE_COMPRESS; // Set the default format for ISOC endpoint
static int video_debug = 0; // Set the default Debug Mode of the device driver
static int PowerOnAtOpen = 1; // Set the default device to power on at startup
static int video_nr = -1; // Sequential Number of Video Device
static int radio_nr = -1; // Sequential Number of Radio Device
static int vbi_nr = -1; // Sequential Number of VBI Device
static char *CustomDevice=NULL; // Set as nothing....
// Grab parameters for the device driver
#if defined(module_param) // Showing parameters under SYSFS
module_param(isocMode, int, 0444);
module_param(video_debug, int, 0444);
module_param(PowerOnAtOpen, int, 0444);
module_param(video_nr, int, 0444);
module_param(radio_nr, int, 0444);
module_param(vbi_nr, int, 0444);
module_param(CustomDevice, charp, 0444);
#else // Old Style
MODULE_PARAM(isocMode, "i");
MODULE_PARM(video_debug, "i"); // Grab the Debug Mode of the device driver
MODULE_PARM(adjustCompression, "i"); // Grab the compression to be adaptive
MODULE_PARM(PowerOnAtOpen, "i"); // Grab the device to power on at startup
MODULE_PARM(SwitchSVideoInput, "i"); // To help people with Black and White output with using s-video input. Some cables and input device are wired differently.
MODULE_PARM(video_nr, "i"); // video_nr option allows to specify a certain /dev/videoX device (like /dev/video0 or /dev/video1 ...)
MODULE_PARM(radio_nr, "i"); // radio_nr option allows to specify a certain /dev/radioX device (like /dev/radio0 or /dev/radio1 ...)
MODULE_PARM(vbi_nr, "i"); // vbi_nr option allows to specify a certain /dev/vbiX device (like /dev/vbi0 or /dev/vbi1 ...)
MODULE_PARM(CustomDevice, "s"); // .... CustomDevice
#endif
MODULE_PARM_DESC(isocMode, " Set the default format for ISOC endpoint. Default: 0x60 (Compression On)");
MODULE_PARM_DESC(video_debug, " Set the default Debug Mode of the device driver. Default: 0 (Off)");
MODULE_PARM_DESC(PowerOnAtOpen, " Set the default device to power on when device is opened. Default: 1 (On)");
MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX). Default: -1 (autodetect)");
MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)");
MODULE_PARM_DESC(vbi_nr, "Set vbi device number (/dev/vbiX). Default: -1 (autodetect)");
MODULE_PARM_DESC(CustomDevice, " Define the fine tuning parameters for the device. Default: null");
// Misc stuff
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);
MODULE_VERSION(USBVISION_VERSION_STRING);
MODULE_ALIAS(DRIVER_ALIAS);
/****************************************************************************************/
/* SYSFS Code - Copied from the stv680.c usb module. */
/* Device information is located at /sys/class/video4linux/video0 */
/* Device parameters information is located at /sys/module/usbvision */
/* Device USB Information is located at /sys/bus/usb/drivers/USBVision Video Grabber */
/****************************************************************************************/
#define YES_NO(x) ((x) ? "Yes" : "No")
static inline struct usb_usbvision *cd_to_usbvision(struct class_device *cd)
{
struct video_device *vdev = container_of(cd, struct video_device, class_dev);
return video_get_drvdata(vdev);
}
static ssize_t show_version(struct class_device *cd, char *buf)
{
return sprintf(buf, "%s\n", USBVISION_VERSION_STRING);
}
static CLASS_DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
static ssize_t show_model(struct class_device *cd, char *buf)
{
struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", usbvision_device_data[usbvision->DevModel].ModelString);
}
static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
static ssize_t show_hue(struct class_device *cd, char *buf)
{
struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_HUE;
ctrl.value = 0;
if(usbvision->user)
call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value >> 8);
}
static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
static ssize_t show_contrast(struct class_device *cd, char *buf)
{
struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_CONTRAST;
ctrl.value = 0;
if(usbvision->user)
call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value >> 8);
}
static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
static ssize_t show_brightness(struct class_device *cd, char *buf)
{
struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_BRIGHTNESS;
ctrl.value = 0;
if(usbvision->user)
call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value >> 8);
}
static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
static ssize_t show_saturation(struct class_device *cd, char *buf)
{
struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_SATURATION;
ctrl.value = 0;
if(usbvision->user)
call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
return sprintf(buf, "%d\n", ctrl.value >> 8);
}
static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
static ssize_t show_streaming(struct class_device *cd, char *buf)
{
struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", YES_NO(usbvision->streaming==Stream_On?1:0));
}
static CLASS_DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
static ssize_t show_compression(struct class_device *cd, char *buf)
{
struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
}
static CLASS_DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
static ssize_t show_device_bridge(struct class_device *cd, char *buf)
{
struct video_device *vdev = container_of(cd, struct video_device, class_dev);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%d\n", usbvision->bridgeType);
}
static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
static void usbvision_create_sysfs(struct video_device *vdev)
{
int res;
if (!vdev)
return;
do {
res=class_device_create_file(&vdev->class_dev,
&class_device_attr_version);
if (res<0)
break;
res=class_device_create_file(&vdev->class_dev,
&class_device_attr_model);
if (res<0)
break;
res=class_device_create_file(&vdev->class_dev,
&class_device_attr_hue);
if (res<0)
break;
res=class_device_create_file(&vdev->class_dev,
&class_device_attr_contrast);
if (res<0)
break;
res=class_device_create_file(&vdev->class_dev,
&class_device_attr_brightness);
if (res<0)
break;
res=class_device_create_file(&vdev->class_dev,
&class_device_attr_saturation);
if (res<0)
break;
res=class_device_create_file(&vdev->class_dev,
&class_device_attr_streaming);
if (res<0)
break;
res=class_device_create_file(&vdev->class_dev,
&class_device_attr_compression);
if (res<0)
break;
res=class_device_create_file(&vdev->class_dev,
&class_device_attr_bridge);
if (res>=0)
return;
} while (0);
err("%s error: %d\n", __FUNCTION__, res);
}
static void usbvision_remove_sysfs(struct video_device *vdev)
{
if (vdev) {
class_device_remove_file(&vdev->class_dev,
&class_device_attr_version);
class_device_remove_file(&vdev->class_dev,
&class_device_attr_model);
class_device_remove_file(&vdev->class_dev,
&class_device_attr_hue);
class_device_remove_file(&vdev->class_dev,
&class_device_attr_contrast);
class_device_remove_file(&vdev->class_dev,
&class_device_attr_brightness);
class_device_remove_file(&vdev->class_dev,
&class_device_attr_saturation);
class_device_remove_file(&vdev->class_dev,
&class_device_attr_streaming);
class_device_remove_file(&vdev->class_dev,
&class_device_attr_compression);
class_device_remove_file(&vdev->class_dev,
&class_device_attr_bridge);
}
}
/*
* usbvision_open()
*
* This is part of Video 4 Linux API. The driver can be opened by one
* client only (checks internal counter 'usbvision->user'). The procedure
* then allocates buffers needed for video processing.
*
*/
static int usbvision_v4l2_open(struct inode *inode, struct file *file)
{
struct video_device *dev = video_devdata(file);
struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
int errCode = 0;
PDEBUG(DBG_IO, "open");
usbvision_reset_powerOffTimer(usbvision);
if (usbvision->user)
errCode = -EBUSY;
else {
/* Allocate memory for the frame buffers */
errCode = usbvision_frames_alloc(usbvision);
if(!errCode) {
/* Allocate memory for the scratch ring buffer */
errCode = usbvision_scratch_alloc(usbvision);
if ((!errCode) && (isocMode==ISOC_MODE_COMPRESS)) {
/* Allocate intermediate decompression buffers only if needed */
errCode = usbvision_decompress_alloc(usbvision);
}
}
if (errCode) {
/* Deallocate all buffers if trouble */
usbvision_frames_free(usbvision);
usbvision_scratch_free(usbvision);
usbvision_decompress_free(usbvision);
}
}
/* If so far no errors then we shall start the camera */
if (!errCode) {
down(&usbvision->lock);
if (usbvision->power == 0) {
usbvision_power_on(usbvision);
usbvision_init_i2c(usbvision);
}
/* Send init sequence only once, it's large! */
if (!usbvision->initialized) {
int setup_ok = 0;
setup_ok = usbvision_setup(usbvision,isocMode);
if (setup_ok)
usbvision->initialized = 1;
else
errCode = -EBUSY;
}
if (!errCode) {
usbvision_begin_streaming(usbvision);
errCode = usbvision_init_isoc(usbvision);
/* device needs to be initialized before isoc transfer */
usbvision_muxsel(usbvision,0);
usbvision->user++;
}
else {
if (PowerOnAtOpen) {
usbvision_i2c_usb_del_bus(&usbvision->i2c_adap);
usbvision_power_off(usbvision);
usbvision->initialized = 0;
}
}
up(&usbvision->lock);
}
if (errCode) {
}
/* prepare queues */
usbvision_empty_framequeues(usbvision);
PDEBUG(DBG_IO, "success");
return errCode;
}
/*
* usbvision_v4l2_close()
*
* This is part of Video 4 Linux API. The procedure
* stops streaming and deallocates all buffers that were earlier
* allocated in usbvision_v4l2_open().
*
*/
static int usbvision_v4l2_close(struct inode *inode, struct file *file)
{
struct video_device *dev = video_devdata(file);
struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
PDEBUG(DBG_IO, "close");
down(&usbvision->lock);
usbvision_audio_off(usbvision);
usbvision_restart_isoc(usbvision);
usbvision_stop_isoc(usbvision);
usbvision_decompress_free(usbvision);
usbvision_frames_free(usbvision);
usbvision_scratch_free(usbvision);
usbvision->user--;
if (PowerOnAtOpen) {
/* power off in a little while to avoid off/on every close/open short sequences */
usbvision_set_powerOffTimer(usbvision);
usbvision->initialized = 0;
}
up(&usbvision->lock);
if (usbvision->remove_pending) {
info("%s: Final disconnect", __FUNCTION__);
usbvision_release(usbvision);
}
PDEBUG(DBG_IO, "success");
return 0;
}
/*
* usbvision_ioctl()
*
* This is part of Video 4 Linux API. The procedure handles ioctl() calls.
*
*/
static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *arg)
{
struct video_device *dev = video_devdata(file);
struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
if (!USBVISION_IS_OPERATIONAL(usbvision))
return -EFAULT;
switch (cmd) {
#ifdef CONFIG_VIDEO_ADV_DEBUG
/* ioctls to allow direct acces to the NT100x registers */
case VIDIOC_INT_G_REGISTER:
{
struct v4l2_register *reg = arg;
int errCode;
if (reg->i2c_id != 0)
return -EINVAL;
/* NT100x has a 8-bit register space */
errCode = usbvision_read_reg(usbvision, reg->reg&0xff);
if (errCode < 0) {
err("%s: VIDIOC_INT_G_REGISTER failed: error %d", __FUNCTION__, errCode);
}
else {
reg->val=(unsigned char)errCode;
PDEBUG(DBG_IOCTL, "VIDIOC_INT_G_REGISTER reg=0x%02X, value=0x%02X",
(unsigned int)reg->reg, reg->val);
errCode = 0; // No error
}
return errCode;
}
case VIDIOC_INT_S_REGISTER:
{
struct v4l2_register *reg = arg;
int errCode;
if (reg->i2c_id != 0)
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val);
if (errCode < 0) {
err("%s: VIDIOC_INT_S_REGISTER failed: error %d", __FUNCTION__, errCode);
}
else {
PDEBUG(DBG_IOCTL, "VIDIOC_INT_S_REGISTER reg=0x%02X, value=0x%02X",
(unsigned int)reg->reg, reg->val);
errCode = 0;
}
return 0;
}
#endif
case VIDIOC_QUERYCAP:
{
struct v4l2_capability *vc=arg;
memset(vc, 0, sizeof(*vc));
strlcpy(vc->driver, "USBVision", sizeof(vc->driver));
strlcpy(vc->card, usbvision_device_data[usbvision->DevModel].ModelString,
sizeof(vc->card));
strlcpy(vc->bus_info, usbvision->dev->dev.bus_id,
sizeof(vc->bus_info));
vc->version = USBVISION_DRIVER_VERSION;
vc->capabilities = V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_AUDIO |
V4L2_CAP_READWRITE |
V4L2_CAP_STREAMING |
(usbvision->have_tuner ? V4L2_CAP_TUNER : 0);
PDEBUG(DBG_IOCTL, "VIDIOC_QUERYCAP");
return 0;
}
case VIDIOC_ENUMINPUT:
{
struct v4l2_input *vi = arg;
int chan;
if ((vi->index >= usbvision->video_inputs) || (vi->index < 0) )
return -EINVAL;
if (usbvision->have_tuner) {
chan = vi->index;
}
else {
chan = vi->index + 1; //skip Television string
}
switch(chan) {
case 0:
if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
strcpy(vi->name, "White Video Input");
}
else {
strcpy(vi->name, "Television");
vi->type = V4L2_INPUT_TYPE_TUNER;
vi->audioset = 1;
vi->tuner = chan;
vi->std = V4L2_STD_PAL | V4L2_STD_NTSC | V4L2_STD_SECAM;
}
break;
case 1:
vi->type = V4L2_INPUT_TYPE_CAMERA;
if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
strcpy(vi->name, "Green Video Input");
}
else {
strcpy(vi->name, "Composite Video Input");
}
vi->std = V4L2_STD_PAL;
break;
case 2:
vi->type = V4L2_INPUT_TYPE_CAMERA;
if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
strcpy(vi->name, "Yellow Video Input");
}
else {
strcpy(vi->name, "S-Video Input");
}
vi->std = V4L2_STD_PAL;
break;
case 3:
vi->type = V4L2_INPUT_TYPE_CAMERA;
strcpy(vi->name, "Red Video Input");
vi->std = V4L2_STD_PAL;
break;
}
PDEBUG(DBG_IOCTL, "VIDIOC_ENUMINPUT name=%s:%d tuners=%d type=%d norm=%x",
vi->name, vi->index, vi->tuner,vi->type,(int)vi->std);
return 0;
}
case VIDIOC_ENUMSTD:
{
struct v4l2_standard *e = arg;
unsigned int i;
int ret;
i = e->index;
if (i >= TVNORMS)
return -EINVAL;
ret = v4l2_video_std_construct(e, tvnorms[e->index].id,
tvnorms[e->index].name);
e->index = i;
if (ret < 0)
return ret;
return 0;
}
case VIDIOC_G_INPUT:
{
int *input = arg;
*input = usbvision->ctl_input;
return 0;
}
case VIDIOC_S_INPUT:
{
int *input = arg;
if ((*input >= usbvision->video_inputs) || (*input < 0) )
return -EINVAL;
usbvision->ctl_input = *input;
down(&usbvision->lock);
usbvision_muxsel(usbvision, usbvision->ctl_input);
usbvision_set_input(usbvision);
usbvision_set_output(usbvision, usbvision->curwidth, usbvision->curheight);
up(&usbvision->lock);
return 0;
}
case VIDIOC_G_STD:
{
v4l2_std_id *id = arg;
*id = usbvision->tvnorm->id;
PDEBUG(DBG_IOCTL, "VIDIOC_G_STD std_id=%s", usbvision->tvnorm->name);
return 0;
}
case VIDIOC_S_STD:
{
v4l2_std_id *id = arg;
unsigned int i;
for (i = 0; i < TVNORMS; i++)
if (*id == tvnorms[i].id)
break;
if (i == TVNORMS)
for (i = 0; i < TVNORMS; i++)
if (*id & tvnorms[i].id)
break;
if (i == TVNORMS)
return -EINVAL;
down(&usbvision->lock);
usbvision->tvnorm = &tvnorms[i];
call_i2c_clients(usbvision, VIDIOC_S_STD,
&usbvision->tvnorm->id);
up(&usbvision->lock);
PDEBUG(DBG_IOCTL, "VIDIOC_S_STD std_id=%s", usbvision->tvnorm->name);
return 0;
}
case VIDIOC_G_TUNER:
{
struct v4l2_tuner *vt = arg;
if (!usbvision->have_tuner || vt->index) // Only tuner 0
return -EINVAL;
strcpy(vt->name, "Television");
/* Let clients fill in the remainder of this struct */
call_i2c_clients(usbvision,VIDIOC_G_TUNER,vt);
PDEBUG(DBG_IOCTL, "VIDIOC_G_TUNER signal=%x, afc=%x",vt->signal,vt->afc);
return 0;
}
case VIDIOC_S_TUNER:
{
struct v4l2_tuner *vt = arg;
// Only no or one tuner for now
if (!usbvision->have_tuner || vt->index)
return -EINVAL;
/* let clients handle this */
call_i2c_clients(usbvision,VIDIOC_S_TUNER,vt);
PDEBUG(DBG_IOCTL, "VIDIOC_S_TUNER");
return 0;
}
case VIDIOC_G_FREQUENCY:
{
struct v4l2_frequency *freq = arg;
freq->tuner = 0; // Only one tuner
freq->type = V4L2_TUNER_ANALOG_TV;
freq->frequency = usbvision->freq;
PDEBUG(DBG_IOCTL, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)freq->frequency);
return 0;
}
case VIDIOC_S_FREQUENCY:
{
struct v4l2_frequency *freq = arg;
// Only no or one tuner for now
if (!usbvision->have_tuner || freq->tuner)
return -EINVAL;
usbvision->freq = freq->frequency;
call_i2c_clients(usbvision, cmd, freq);
PDEBUG(DBG_IOCTL, "VIDIOC_S_FREQUENCY freq=0x%X", (unsigned)freq->frequency);
return 0;
}
case VIDIOC_G_AUDIO:
{
struct v4l2_audio *v = arg;
memset(v,0, sizeof(v));
strcpy(v->name, "TV");
PDEBUG(DBG_IOCTL, "VIDIOC_G_AUDIO");
return 0;
}
case VIDIOC_S_AUDIO:
{
struct v4l2_audio *v = arg;
if(v->index) {
return -EINVAL;
}
PDEBUG(DBG_IOCTL, "VIDIOC_S_AUDIO");
return 0;
}
case VIDIOC_QUERYCTRL:
{
struct v4l2_queryctrl *ctrl = arg;
int id=ctrl->id;
memset(ctrl,0,sizeof(*ctrl));
ctrl->id=id;
call_i2c_clients(usbvision, cmd, arg);
if (ctrl->type)
return 0;
else
return -EINVAL;
PDEBUG(DBG_IOCTL,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type);
}
case VIDIOC_G_CTRL:
{
struct v4l2_control *ctrl = arg;
PDEBUG(DBG_IOCTL,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl);
return 0;
}
case VIDIOC_S_CTRL:
{
struct v4l2_control *ctrl = arg;
PDEBUG(DBG_IOCTL, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value);
call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl);
return 0;
}
case VIDIOC_REQBUFS:
{
struct v4l2_requestbuffers *vr = arg;
int ret;
RESTRICT_TO_RANGE(vr->count,1,USBVISION_NUMFRAMES);
// Check input validity : the user must do a VIDEO CAPTURE and MMAP method.
if((vr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ||
(vr->memory != V4L2_MEMORY_MMAP))
return -EINVAL;
if(usbvision->streaming == Stream_On) {
if ((ret = usbvision_stream_interrupt(usbvision)))
return ret;
}
usbvision_empty_framequeues(usbvision);
usbvision->curFrame = NULL;
PDEBUG(DBG_IOCTL, "VIDIOC_REQBUFS count=%d",vr->count);
return 0;
}
case VIDIOC_QUERYBUF:
{
struct v4l2_buffer *vb = arg;
struct usbvision_frame *frame;
// FIXME : must control that buffers are mapped (VIDIOC_REQBUFS has been called)
if(vb->type != V4L2_CAP_VIDEO_CAPTURE) {
return -EINVAL;
}
if(vb->index>=USBVISION_NUMFRAMES) {
return -EINVAL;
}
// Updating the corresponding frame state
vb->flags = 0;
frame = &usbvision->frame[vb->index];
if(frame->grabstate >= FrameState_Ready)
vb->flags |= V4L2_BUF_FLAG_QUEUED;
if(frame->grabstate >= FrameState_Done)
vb->flags |= V4L2_BUF_FLAG_DONE;
if(frame->grabstate == FrameState_Unused)
vb->flags |= V4L2_BUF_FLAG_MAPPED;
vb->memory = V4L2_MEMORY_MMAP;
vb->m.offset = vb->index*usbvision->max_frame_size;
vb->memory = V4L2_MEMORY_MMAP;
vb->field = V4L2_FIELD_NONE;
vb->length = usbvision->curwidth*usbvision->curheight*usbvision->palette.bytes_per_pixel;
vb->timestamp = usbvision->frame[vb->index].timestamp;
vb->sequence = usbvision->frame[vb->index].sequence;
return 0;
}
case VIDIOC_QBUF:
{
struct v4l2_buffer *vb = arg;
struct usbvision_frame *frame;
unsigned long lock_flags;
// FIXME : works only on VIDEO_CAPTURE MODE, MMAP.
if(vb->type != V4L2_CAP_VIDEO_CAPTURE) {
return -EINVAL;
}
if(vb->index>=USBVISION_NUMFRAMES) {
return -EINVAL;
}
frame = &usbvision->frame[vb->index];
if (frame->grabstate != FrameState_Unused) {
return -EAGAIN;
}
/* Mark it as ready and enqueue frame */
frame->grabstate = FrameState_Ready;
frame->scanstate = ScanState_Scanning;
frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */
vb->flags &= ~V4L2_BUF_FLAG_DONE;
/* set v4l2_format index */
frame->v4l2_format = usbvision->palette;
spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
list_add_tail(&usbvision->frame[vb->index].frame, &usbvision->inqueue);
spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
PDEBUG(DBG_IOCTL, "VIDIOC_QBUF frame #%d",vb->index);
return 0;
}
case VIDIOC_DQBUF:
{
struct v4l2_buffer *vb = arg;
int ret;
struct usbvision_frame *f;
unsigned long lock_flags;
if (vb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
if (list_empty(&(usbvision->outqueue))) {
if (usbvision->streaming == Stream_Idle)
return -EINVAL;
ret = wait_event_interruptible
(usbvision->wait_frame,
!list_empty(&(usbvision->outqueue)));
if (ret)
return ret;
}
spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
f = list_entry(usbvision->outqueue.next,
struct usbvision_frame, frame);
list_del(usbvision->outqueue.next);
spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
f->grabstate = FrameState_Unused;
vb->memory = V4L2_MEMORY_MMAP;
vb->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | V4L2_BUF_FLAG_DONE;
vb->index = f->index;
vb->sequence = f->sequence;
vb->timestamp = f->timestamp;
vb->field = V4L2_FIELD_NONE;
vb->bytesused = f->scanlength;
return 0;
}
case VIDIOC_STREAMON:
{
int b=V4L2_BUF_TYPE_VIDEO_CAPTURE;
usbvision->streaming = Stream_On;
call_i2c_clients(usbvision,VIDIOC_STREAMON , &b);
PDEBUG(DBG_IOCTL, "VIDIOC_STREAMON");
return 0;
}
case VIDIOC_STREAMOFF:
{
int *type = arg;
int b=V4L2_BUF_TYPE_VIDEO_CAPTURE;
if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
if(usbvision->streaming == Stream_On) {
usbvision_stream_interrupt(usbvision);
// Stop all video streamings
call_i2c_clients(usbvision,VIDIOC_STREAMOFF , &b);
}
usbvision_empty_framequeues(usbvision);
PDEBUG(DBG_IOCTL, "VIDIOC_STREAMOFF");
return 0;
}
case VIDIOC_ENUM_FMT:
{
struct v4l2_fmtdesc *vfd = arg;
if(vfd->index>=USBVISION_SUPPORTED_PALETTES-1) {
return -EINVAL;
}
vfd->flags = 0;
vfd->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
strcpy(vfd->description,usbvision_v4l2_format[vfd->index].desc);
vfd->pixelformat = usbvision_v4l2_format[vfd->index].format;
memset(vfd->reserved, 0, sizeof(vfd->reserved));
return 0;
}
case VIDIOC_G_FMT:
{
struct v4l2_format *vf = arg;
switch (vf->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
{
vf->fmt.pix.width = usbvision->curwidth;
vf->fmt.pix.height = usbvision->curheight;
vf->fmt.pix.pixelformat = usbvision->palette.format;
vf->fmt.pix.bytesperline = usbvision->curwidth*usbvision->palette.bytes_per_pixel;
vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*usbvision->curheight;
vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */
PDEBUG(DBG_IOCTL, "VIDIOC_G_FMT w=%d, h=%d, format=%s",
vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc);
return 0;
}
default:
PDEBUG(DBG_IOCTL, "VIDIOC_G_FMT invalid type %d",vf->type);
return -EINVAL;
}
return 0;
}
case VIDIOC_TRY_FMT:
case VIDIOC_S_FMT:
{
struct v4l2_format *vf = arg;
int formatIdx,ret;
switch(vf->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
{
/* Find requested format in available ones */
for(formatIdx=0;formatIdx<USBVISION_SUPPORTED_PALETTES;formatIdx++) {
if(vf->fmt.pix.pixelformat == usbvision_v4l2_format[formatIdx].format) {
usbvision->palette = usbvision_v4l2_format[formatIdx];
break;
}
}
/* robustness */
if(formatIdx == USBVISION_SUPPORTED_PALETTES) {
return -EINVAL;
}
RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH);
RESTRICT_TO_RANGE(vf->fmt.pix.height, MIN_FRAME_HEIGHT, MAX_FRAME_HEIGHT);
vf->fmt.pix.bytesperline = vf->fmt.pix.width*usbvision->palette.bytes_per_pixel;
vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*vf->fmt.pix.height;
if(cmd == VIDIOC_TRY_FMT) {
PDEBUG(DBG_IOCTL, "VIDIOC_TRY_FMT grabdisplay w=%d, h=%d, format=%s",
vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc);
return 0;
}
/* stop io in case it is already in progress */
if(usbvision->streaming == Stream_On) {
if ((ret = usbvision_stream_interrupt(usbvision)))
return ret;
}
usbvision_empty_framequeues(usbvision);
usbvision->curFrame = NULL;
// by now we are committed to the new data...
down(&usbvision->lock);
usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height);
up(&usbvision->lock);
PDEBUG(DBG_IOCTL, "VIDIOC_S_FMT grabdisplay w=%d, h=%d, format=%s",
vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc);
return 0;
}
default:
return -EINVAL;
}
}
default:
return -ENOIOCTLCMD;
}
return 0;
}
static int usbvision_v4l2_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
return video_usercopy(inode, file, cmd, arg, usbvision_v4l2_do_ioctl);
}
static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct video_device *dev = video_devdata(file);
struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
int noblock = file->f_flags & O_NONBLOCK;
unsigned long lock_flags;
int ret,i;
struct usbvision_frame *frame;
PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __FUNCTION__, (unsigned long)count, noblock);
if (!USBVISION_IS_OPERATIONAL(usbvision) || (buf == NULL))
return -EFAULT;
/* no stream is running, make it running ! */
usbvision->streaming = Stream_On;
call_i2c_clients(usbvision,VIDIOC_STREAMON , NULL);
/* First, enqueue as many frames as possible (like a user of VIDIOC_QBUF would do) */
for(i=0;i<USBVISION_NUMFRAMES;i++) {
frame = &usbvision->frame[i];
if(frame->grabstate == FrameState_Unused) {
/* Mark it as ready and enqueue frame */
frame->grabstate = FrameState_Ready;
frame->scanstate = ScanState_Scanning;
frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */
/* set v4l2_format index */
frame->v4l2_format = usbvision->palette;
spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
list_add_tail(&frame->frame, &usbvision->inqueue);
spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
}
}
/* Then try to steal a frame (like a VIDIOC_DQBUF would do) */
if (list_empty(&(usbvision->outqueue))) {
if(noblock)
return -EAGAIN;
ret = wait_event_interruptible
(usbvision->wait_frame,
!list_empty(&(usbvision->outqueue)));
if (ret)
return ret;
}
spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
frame = list_entry(usbvision->outqueue.next,
struct usbvision_frame, frame);
list_del(usbvision->outqueue.next);
spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
/* An error returns an empty frame */
if (frame->grabstate == FrameState_Error) {
frame->bytes_read = 0;
return 0;
}
PDEBUG(DBG_IO, "%s: frmx=%d, bytes_read=%ld, scanlength=%ld", __FUNCTION__,
frame->index, frame->bytes_read, frame->scanlength);
/* copy bytes to user space; we allow for partials reads */
if ((count + frame->bytes_read) > (unsigned long)frame->scanlength)
count = frame->scanlength - frame->bytes_read;
if (copy_to_user(buf, frame->data + frame->bytes_read, count)) {
return -EFAULT;
}
frame->bytes_read += count;
PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld", __FUNCTION__,
(unsigned long)count, frame->bytes_read);
// For now, forget the frame if it has not been read in one shot.
/* if (frame->bytes_read >= frame->scanlength) {// All data has been read */
frame->bytes_read = 0;
/* Mark it as available to be used again. */
frame->grabstate = FrameState_Unused;
/* } */
return count;
}
static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
{
unsigned long size = vma->vm_end - vma->vm_start,
start = vma->vm_start;
void *pos;
u32 i;
struct video_device *dev = video_devdata(file);
struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
down(&usbvision->lock);
if (!USBVISION_IS_OPERATIONAL(usbvision)) {
up(&usbvision->lock);
return -EFAULT;
}
if (!(vma->vm_flags & VM_WRITE) ||
size != PAGE_ALIGN(usbvision->curwidth*usbvision->curheight*usbvision->palette.bytes_per_pixel)) {
up(&usbvision->lock);
return -EINVAL;
}
for (i = 0; i < USBVISION_NUMFRAMES; i++) {
if (((usbvision->max_frame_size*i) >> PAGE_SHIFT) == vma->vm_pgoff)
break;
}
if (i == USBVISION_NUMFRAMES) {
PDEBUG(DBG_MMAP, "mmap: user supplied mapping address is out of range");
up(&usbvision->lock);
return -EINVAL;
}
/* VM_IO is eventually going to replace PageReserved altogether */
vma->vm_flags |= VM_IO;
vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */
pos = usbvision->frame[i].data;
while (size > 0) {
if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed");
up(&usbvision->lock);
return -EAGAIN;
}
start += PAGE_SIZE;
pos += PAGE_SIZE;
size -= PAGE_SIZE;
}
up(&usbvision->lock);
return 0;
}
/*
* Here comes the stuff for radio on usbvision based devices
*
*/
static int usbvision_radio_open(struct inode *inode, struct file *file)
{
struct video_device *dev = video_devdata(file);
struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
struct v4l2_frequency freq;
int errCode = 0;
PDEBUG(DBG_IO, "%s:", __FUNCTION__);
down(&usbvision->lock);
if (usbvision->user) {
err("%s: Someone tried to open an already opened USBVision Radio!", __FUNCTION__);
errCode = -EBUSY;
}
else {
if(PowerOnAtOpen) {
usbvision_reset_powerOffTimer(usbvision);
if (usbvision->power == 0) {
usbvision_power_on(usbvision);
usbvision_init_i2c(usbvision);
}
}
// If so far no errors then we shall start the radio
usbvision->radio = 1;
call_i2c_clients(usbvision,AUDC_SET_RADIO,&usbvision->tuner_type);
freq.frequency = 1517; //SWR3 @ 94.8MHz
call_i2c_clients(usbvision, VIDIOC_S_FREQUENCY, &freq);
usbvision_set_audio(usbvision, USBVISION_AUDIO_RADIO);
usbvision->user++;
}
if (errCode) {
if (PowerOnAtOpen) {
usbvision_i2c_usb_del_bus(&usbvision->i2c_adap);
usbvision_power_off(usbvision);
usbvision->initialized = 0;
}
}
up(&usbvision->lock);
return errCode;
}
static int usbvision_radio_close(struct inode *inode, struct file *file)
{
struct video_device *dev = video_devdata(file);
struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
int errCode = 0;
PDEBUG(DBG_IO, "");
down(&usbvision->lock);
usbvision_audio_off(usbvision);
usbvision->radio=0;
usbvision->user--;
if (PowerOnAtOpen) {
usbvision_set_powerOffTimer(usbvision);
usbvision->initialized = 0;
}
up(&usbvision->lock);
if (usbvision->remove_pending) {
info("%s: Final disconnect", __FUNCTION__);
usbvision_release(usbvision);
}
PDEBUG(DBG_IO, "success");
return errCode;
}
static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *arg)
{
struct video_device *dev = video_devdata(file);
struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
if (!USBVISION_IS_OPERATIONAL(usbvision))
return -EIO;
switch (cmd) {
case VIDIOC_QUERYCAP:
{
struct v4l2_capability *vc=arg;
memset(vc, 0, sizeof(*vc));
strlcpy(vc->driver, "USBVision", sizeof(vc->driver));
strlcpy(vc->card, usbvision_device_data[usbvision->DevModel].ModelString,
sizeof(vc->card));
strlcpy(vc->bus_info, usbvision->dev->dev.bus_id,
sizeof(vc->bus_info));
vc->version = USBVISION_DRIVER_VERSION;
vc->capabilities = (usbvision->have_tuner ? V4L2_CAP_TUNER : 0);
PDEBUG(DBG_IO, "VIDIOC_QUERYCAP");
return 0;
}
case VIDIOC_QUERYCTRL:
{
struct v4l2_queryctrl *ctrl = arg;
int id=ctrl->id;
memset(ctrl,0,sizeof(*ctrl));
ctrl->id=id;
call_i2c_clients(usbvision, cmd, arg);
PDEBUG(DBG_IO,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type);
if (ctrl->type)
return 0;
else
return -EINVAL;
}
case VIDIOC_G_CTRL:
{
struct v4l2_control *ctrl = arg;
call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl);
PDEBUG(DBG_IO,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
return 0;
}
case VIDIOC_S_CTRL:
{
struct v4l2_control *ctrl = arg;
call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl);
PDEBUG(DBG_IO, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value);
return 0;
}
case VIDIOC_G_TUNER:
{
struct v4l2_tuner *t = arg;
if (t->index > 0)
return -EINVAL;
memset(t,0,sizeof(*t));
strcpy(t->name, "Radio");
t->type = V4L2_TUNER_RADIO;
/* Let clients fill in the remainder of this struct */
call_i2c_clients(usbvision,VIDIOC_G_TUNER,t);
PDEBUG(DBG_IO, "VIDIOC_G_TUNER signal=%x, afc=%x",t->signal,t->afc);
return 0;
}
case VIDIOC_S_TUNER:
{
struct v4l2_tuner *vt = arg;
// Only no or one tuner for now
if (!usbvision->have_tuner || vt->index)
return -EINVAL;
/* let clients handle this */
call_i2c_clients(usbvision,VIDIOC_S_TUNER,vt);
PDEBUG(DBG_IO, "VIDIOC_S_TUNER");
return 0;
}
case VIDIOC_G_AUDIO:
{
struct v4l2_audio *a = arg;
memset(a,0,sizeof(*a));
strcpy(a->name,"Radio");
PDEBUG(DBG_IO, "VIDIOC_G_AUDIO");
return 0;
}
case VIDIOC_S_AUDIO:
case VIDIOC_S_INPUT:
case VIDIOC_S_STD:
return 0;
case VIDIOC_G_FREQUENCY:
{
struct v4l2_frequency *f = arg;
memset(f,0,sizeof(*f));
f->type = V4L2_TUNER_RADIO;
f->frequency = usbvision->freq;
call_i2c_clients(usbvision, cmd, f);
PDEBUG(DBG_IO, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)f->frequency);
return 0;
}
case VIDIOC_S_FREQUENCY:
{
struct v4l2_frequency *f = arg;
if (f->tuner != 0)
return -EINVAL;
usbvision->freq = f->frequency;
call_i2c_clients(usbvision, cmd, f);
PDEBUG(DBG_IO, "VIDIOC_S_FREQUENCY freq=0x%X", (unsigned)f->frequency);
return 0;
}
default:
{
PDEBUG(DBG_IO, "%s: Unknown command %x", __FUNCTION__, cmd);
return -ENOIOCTLCMD;
}
}
return 0;
}
static int usbvision_radio_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
return video_usercopy(inode, file, cmd, arg, usbvision_do_radio_ioctl);
}
/*
* Here comes the stuff for vbi on usbvision based devices
*
*/
static int usbvision_vbi_open(struct inode *inode, struct file *file)
{
/* TODO */
return -EINVAL;
}
static int usbvision_vbi_close(struct inode *inode, struct file *file)
{
/* TODO */
return -EINVAL;
}
static int usbvision_do_vbi_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *arg)
{
/* TODO */
return -EINVAL;
}
static int usbvision_vbi_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
return video_usercopy(inode, file, cmd, arg, usbvision_do_vbi_ioctl);
}
//
// Video registration stuff
//
// Video template
static const struct file_operations usbvision_fops = {
.owner = THIS_MODULE,
.open = usbvision_v4l2_open,
.release = usbvision_v4l2_close,
.read = usbvision_v4l2_read,
.mmap = usbvision_v4l2_mmap,
.ioctl = usbvision_v4l2_ioctl,
.llseek = no_llseek,
};
static struct video_device usbvision_video_template = {
.owner = THIS_MODULE,
.type = VID_TYPE_TUNER | VID_TYPE_CAPTURE,
.hardware = VID_HARDWARE_USBVISION,
.fops = &usbvision_fops,
.name = "usbvision-video",
.release = video_device_release,
.minor = -1,
};
// Radio template
static const struct file_operations usbvision_radio_fops = {
.owner = THIS_MODULE,
.open = usbvision_radio_open,
.release = usbvision_radio_close,
.ioctl = usbvision_radio_ioctl,
.llseek = no_llseek,
};
static struct video_device usbvision_radio_template=
{
.owner = THIS_MODULE,
.type = VID_TYPE_TUNER,
.hardware = VID_HARDWARE_USBVISION,
.fops = &usbvision_radio_fops,
.release = video_device_release,
.name = "usbvision-radio",
.minor = -1,
};
// vbi template
static const struct file_operations usbvision_vbi_fops = {
.owner = THIS_MODULE,
.open = usbvision_vbi_open,
.release = usbvision_vbi_close,
.ioctl = usbvision_vbi_ioctl,
.llseek = no_llseek,
};
static struct video_device usbvision_vbi_template=
{
.owner = THIS_MODULE,
.type = VID_TYPE_TUNER,
.hardware = VID_HARDWARE_USBVISION,
.fops = &usbvision_vbi_fops,
.release = video_device_release,
.name = "usbvision-vbi",
.minor = -1,
};
static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision,
struct video_device *vdev_template,
char *name)
{
struct usb_device *usb_dev = usbvision->dev;
struct video_device *vdev;
if (usb_dev == NULL) {
err("%s: usbvision->dev is not set", __FUNCTION__);
return NULL;
}
vdev = video_device_alloc();
if (NULL == vdev) {
return NULL;
}
*vdev = *vdev_template;
// vdev->minor = -1;
vdev->dev = &usb_dev->dev;
snprintf(vdev->name, sizeof(vdev->name), "%s", name);
video_set_drvdata(vdev, usbvision);
return vdev;
}
// unregister video4linux devices
static void usbvision_unregister_video(struct usb_usbvision *usbvision)
{
// vbi Device:
if (usbvision->vbi) {
PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]", usbvision->vbi->minor & 0x1f);
if (usbvision->vbi->minor != -1) {
video_unregister_device(usbvision->vbi);
}
else {
video_device_release(usbvision->vbi);
}
usbvision->vbi = NULL;
}
// Radio Device:
if (usbvision->rdev) {
PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]", usbvision->rdev->minor & 0x1f);
if (usbvision->rdev->minor != -1) {
video_unregister_device(usbvision->rdev);
}
else {
video_device_release(usbvision->rdev);
}
usbvision->rdev = NULL;
}
// Video Device:
if (usbvision->vdev) {
PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]", usbvision->vdev->minor & 0x1f);
if (usbvision->vdev->minor != -1) {
video_unregister_device(usbvision->vdev);
}
else {
video_device_release(usbvision->vdev);
}
usbvision->vdev = NULL;
}
}
// register video4linux devices
static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
{
// Video Device:
usbvision->vdev = usbvision_vdev_init(usbvision, &usbvision_video_template, "USBVision Video");
if (usbvision->vdev == NULL) {
goto err_exit;
}
if (video_register_device(usbvision->vdev, VFL_TYPE_GRABBER, video_nr)<0) {
goto err_exit;
}
info("USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]", usbvision->nr,usbvision->vdev->minor & 0x1f);
// Radio Device:
if (usbvision_device_data[usbvision->DevModel].Radio) {
// usbvision has radio
usbvision->rdev = usbvision_vdev_init(usbvision, &usbvision_radio_template, "USBVision Radio");
if (usbvision->rdev == NULL) {
goto err_exit;
}
if (video_register_device(usbvision->rdev, VFL_TYPE_RADIO, radio_nr)<0) {
goto err_exit;
}
info("USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]", usbvision->nr, usbvision->rdev->minor & 0x1f);
}
// vbi Device:
if (usbvision_device_data[usbvision->DevModel].vbi) {
usbvision->vbi = usbvision_vdev_init(usbvision, &usbvision_vbi_template, "USBVision VBI");
if (usbvision->vdev == NULL) {
goto err_exit;
}
if (video_register_device(usbvision->vbi, VFL_TYPE_VBI, vbi_nr)<0) {
goto err_exit;
}
info("USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)", usbvision->nr,usbvision->vbi->minor & 0x1f);
}
// all done
return 0;
err_exit:
err("USBVision[%d]: video_register_device() failed", usbvision->nr);
usbvision_unregister_video(usbvision);
return -1;
}
/*
* usbvision_alloc()
*
* This code allocates the struct usb_usbvision. It is filled with default values.
*
* Returns NULL on error, a pointer to usb_usbvision else.
*
*/
static struct usb_usbvision *usbvision_alloc(struct usb_device *dev)
{
struct usb_usbvision *usbvision;
if ((usbvision = kzalloc(sizeof(struct usb_usbvision), GFP_KERNEL)) == NULL) {
goto err_exit;
}
usbvision->dev = dev;
init_MUTEX(&usbvision->lock); /* to 1 == available */
// prepare control urb for control messages during interrupts
usbvision->ctrlUrb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
if (usbvision->ctrlUrb == NULL) {
goto err_exit;
}
init_waitqueue_head(&usbvision->ctrlUrb_wq);
init_MUTEX(&usbvision->ctrlUrbLock); /* to 1 == available */
usbvision_init_powerOffTimer(usbvision);
return usbvision;
err_exit:
if (usbvision && usbvision->ctrlUrb) {
usb_free_urb(usbvision->ctrlUrb);
}
if (usbvision) {
kfree(usbvision);
}
return NULL;
}
/*
* usbvision_release()
*
* This code does final release of struct usb_usbvision. This happens
* after the device is disconnected -and- all clients closed their files.
*
*/
static void usbvision_release(struct usb_usbvision *usbvision)
{
PDEBUG(DBG_PROBE, "");
down(&usbvision->lock);
usbvision_reset_powerOffTimer(usbvision);
usbvision->initialized = 0;
up(&usbvision->lock);
usbvision_remove_sysfs(usbvision->vdev);
usbvision_unregister_video(usbvision);
if (usbvision->ctrlUrb) {
usb_free_urb(usbvision->ctrlUrb);
}
kfree(usbvision);
PDEBUG(DBG_PROBE, "success");
}
/******************************** usb interface *****************************************/
static void usbvision_configure_video(struct usb_usbvision *usbvision)
{
int model,i;
if (usbvision == NULL)
return;
model = usbvision->DevModel;
usbvision->palette = usbvision_v4l2_format[2]; // V4L2_PIX_FMT_RGB24;
if (usbvision_device_data[usbvision->DevModel].Vin_Reg2 >= 0) {
usbvision->Vin_Reg2_Preset = usbvision_device_data[usbvision->DevModel].Vin_Reg2 & 0xff;
} else {
usbvision->Vin_Reg2_Preset = 0;
}
for (i = 0; i < TVNORMS; i++)
if (usbvision_device_data[model].VideoNorm == tvnorms[i].mode)
break;
if (i == TVNORMS)
i = 0;
usbvision->tvnorm = &tvnorms[i]; /* set default norm */
usbvision->video_inputs = usbvision_device_data[model].VideoChannels;
usbvision->ctl_input = 0;
/* This should be here to make i2c clients to be able to register */
usbvision_audio_off(usbvision); //first switch off audio
if (!PowerOnAtOpen) {
usbvision_power_on(usbvision); //and then power up the noisy tuner
usbvision_init_i2c(usbvision);
}
}
/*
* usbvision_probe()
*
* This procedure queries device descriptor and accepts the interface
* if it looks like USBVISION video device
*
*/
static int __devinit usbvision_probe(struct usb_interface *intf, const struct usb_device_id *devid)
{
struct usb_device *dev = interface_to_usbdev(intf);
__u8 ifnum = intf->altsetting->desc.bInterfaceNumber;
const struct usb_host_interface *interface;
struct usb_usbvision *usbvision = NULL;
const struct usb_endpoint_descriptor *endpoint;
int model;
PDEBUG(DBG_PROBE, "VID=%#04x, PID=%#04x, ifnum=%u",
dev->descriptor.idVendor, dev->descriptor.idProduct, ifnum);
/* Is it an USBVISION video dev? */
model = 0;
for(model = 0; usbvision_device_data[model].idVendor; model++) {
if (le16_to_cpu(dev->descriptor.idVendor) != usbvision_device_data[model].idVendor) {
continue;
}
if (le16_to_cpu(dev->descriptor.idProduct) != usbvision_device_data[model].idProduct) {
continue;
}
info("%s: %s found", __FUNCTION__, usbvision_device_data[model].ModelString);
break;
}
if (usbvision_device_data[model].idVendor == 0) {
return -ENODEV; //no matching device
}
if (usbvision_device_data[model].Interface >= 0) {
interface = &dev->actconfig->interface[usbvision_device_data[model].Interface]->altsetting[0];
}
else {
interface = &dev->actconfig->interface[ifnum]->altsetting[0];
}
endpoint = &interface->endpoint[1].desc;
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC) {
err("%s: interface %d. has non-ISO endpoint!", __FUNCTION__, ifnum);
err("%s: Endpoint attribures %d", __FUNCTION__, endpoint->bmAttributes);
return -ENODEV;
}
if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
err("%s: interface %d. has ISO OUT endpoint!", __FUNCTION__, ifnum);
return -ENODEV;
}
usb_get_dev(dev);
if ((usbvision = usbvision_alloc(dev)) == NULL) {
err("%s: couldn't allocate USBVision struct", __FUNCTION__);
return -ENOMEM;
}
if (dev->descriptor.bNumConfigurations > 1) {
usbvision->bridgeType = BRIDGE_NT1004;
}
else if (usbvision_device_data[model].ModelString == "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)") {
usbvision->bridgeType = BRIDGE_NT1005;
}
else {
usbvision->bridgeType = BRIDGE_NT1003;
}
PDEBUG(DBG_PROBE, "bridgeType %d", usbvision->bridgeType);
down(&usbvision->lock);
usbvision->nr = usbvision_nr++;
usbvision->have_tuner = usbvision_device_data[model].Tuner;
if (usbvision->have_tuner) {
usbvision->tuner_type = usbvision_device_data[model].TunerType;
}
usbvision->tuner_addr = ADDR_UNSET;
usbvision->DevModel = model;
usbvision->remove_pending = 0;
usbvision->iface = ifnum;
usbvision->ifaceAltInactive = 0;
usbvision->ifaceAltActive = 1;
usbvision->video_endp = endpoint->bEndpointAddress;
usbvision->isocPacketSize = 0;
usbvision->usb_bandwidth = 0;
usbvision->user = 0;
usbvision->streaming = Stream_Off;
usbvision_register_video(usbvision);
usbvision_configure_video(usbvision);
up(&usbvision->lock);
usb_set_intfdata (intf, usbvision);
usbvision_create_sysfs(usbvision->vdev);
PDEBUG(DBG_PROBE, "success");
return 0;
}
/*
* usbvision_disconnect()
*
* This procedure stops all driver activity, deallocates interface-private
* structure (pointed by 'ptr') and after that driver should be removable
* with no ill consequences.
*
*/
static void __devexit usbvision_disconnect(struct usb_interface *intf)
{
struct usb_usbvision *usbvision = usb_get_intfdata(intf);
PDEBUG(DBG_PROBE, "");
if (usbvision == NULL) {
err("%s: usb_get_intfdata() failed", __FUNCTION__);
return;
}
usb_set_intfdata (intf, NULL);
down(&usbvision->lock);
// At this time we ask to cancel outstanding URBs
usbvision_stop_isoc(usbvision);
if (usbvision->power) {
usbvision_i2c_usb_del_bus(&usbvision->i2c_adap);
usbvision_power_off(usbvision);
}
usbvision->remove_pending = 1; // Now all ISO data will be ignored
usb_put_dev(usbvision->dev);
usbvision->dev = NULL; // USB device is no more
up(&usbvision->lock);
if (usbvision->user) {
info("%s: In use, disconnect pending", __FUNCTION__);
wake_up_interruptible(&usbvision->wait_frame);
wake_up_interruptible(&usbvision->wait_stream);
}
else {
usbvision_release(usbvision);
}
PDEBUG(DBG_PROBE, "success");
}
static struct usb_driver usbvision_driver = {
.name = "usbvision",
.id_table = usbvision_table,
.probe = usbvision_probe,
.disconnect = usbvision_disconnect
};
/*
* customdevice_process()
*
* This procedure preprocesses CustomDevice parameter if any
*
*/
static void customdevice_process(void)
{
usbvision_device_data[0]=usbvision_device_data[1];
usbvision_table[0]=usbvision_table[1];
if(CustomDevice)
{
char *parse=CustomDevice;
PDEBUG(DBG_PROBE, "CustomDevide=%s", CustomDevice);
/*format is CustomDevice="0x0573 0x4D31 0 7113 3 PAL 1 1 1 5 -1 -1 -1 -1 -1"
usbvision_device_data[0].idVendor;
usbvision_device_data[0].idProduct;
usbvision_device_data[0].Interface;
usbvision_device_data[0].Codec;
usbvision_device_data[0].VideoChannels;
usbvision_device_data[0].VideoNorm;
usbvision_device_data[0].AudioChannels;
usbvision_device_data[0].Radio;
usbvision_device_data[0].Tuner;
usbvision_device_data[0].TunerType;
usbvision_device_data[0].Vin_Reg1;
usbvision_device_data[0].Vin_Reg2;
usbvision_device_data[0].X_Offset;
usbvision_device_data[0].Y_Offset;
usbvision_device_data[0].Dvi_yuv;
usbvision_device_data[0].ModelString;
*/
rmspace(parse);
usbvision_device_data[0].ModelString="USBVISION Custom Device";
parse+=2;
sscanf(parse,"%x",&usbvision_device_data[0].idVendor);
goto2next(parse);
PDEBUG(DBG_PROBE, "idVendor=0x%.4X", usbvision_device_data[0].idVendor);
parse+=2;
sscanf(parse,"%x",&usbvision_device_data[0].idProduct);
goto2next(parse);
PDEBUG(DBG_PROBE, "idProduct=0x%.4X", usbvision_device_data[0].idProduct);
sscanf(parse,"%d",&usbvision_device_data[0].Interface);
goto2next(parse);
PDEBUG(DBG_PROBE, "Interface=%d", usbvision_device_data[0].Interface);
sscanf(parse,"%d",&usbvision_device_data[0].Codec);
goto2next(parse);
PDEBUG(DBG_PROBE, "Codec=%d", usbvision_device_data[0].Codec);
sscanf(parse,"%d",&usbvision_device_data[0].VideoChannels);
goto2next(parse);
PDEBUG(DBG_PROBE, "VideoChannels=%d", usbvision_device_data[0].VideoChannels);
switch(*parse)
{
case 'P':
PDEBUG(DBG_PROBE, "VideoNorm=PAL");
usbvision_device_data[0].VideoNorm=V4L2_STD_PAL;
break;
case 'S':
PDEBUG(DBG_PROBE, "VideoNorm=SECAM");
usbvision_device_data[0].VideoNorm=V4L2_STD_SECAM;
break;
case 'N':
PDEBUG(DBG_PROBE, "VideoNorm=NTSC");
usbvision_device_data[0].VideoNorm=V4L2_STD_NTSC;
break;
default:
PDEBUG(DBG_PROBE, "VideoNorm=PAL (by default)");
usbvision_device_data[0].VideoNorm=V4L2_STD_PAL;
break;
}
goto2next(parse);
sscanf(parse,"%d",&usbvision_device_data[0].AudioChannels);
goto2next(parse);
PDEBUG(DBG_PROBE, "AudioChannels=%d", usbvision_device_data[0].AudioChannels);
sscanf(parse,"%d",&usbvision_device_data[0].Radio);
goto2next(parse);
PDEBUG(DBG_PROBE, "Radio=%d", usbvision_device_data[0].Radio);
sscanf(parse,"%d",&usbvision_device_data[0].Tuner);
goto2next(parse);
PDEBUG(DBG_PROBE, "Tuner=%d", usbvision_device_data[0].Tuner);
sscanf(parse,"%d",&usbvision_device_data[0].TunerType);
goto2next(parse);
PDEBUG(DBG_PROBE, "TunerType=%d", usbvision_device_data[0].TunerType);
sscanf(parse,"%d",&usbvision_device_data[0].Vin_Reg1);
goto2next(parse);
PDEBUG(DBG_PROBE, "Vin_Reg1=%d", usbvision_device_data[0].Vin_Reg1);
sscanf(parse,"%d",&usbvision_device_data[0].Vin_Reg2);
goto2next(parse);
PDEBUG(DBG_PROBE, "Vin_Reg2=%d", usbvision_device_data[0].Vin_Reg2);
sscanf(parse,"%d",&usbvision_device_data[0].X_Offset);
goto2next(parse);
PDEBUG(DBG_PROBE, "X_Offset=%d", usbvision_device_data[0].X_Offset);
sscanf(parse,"%d",&usbvision_device_data[0].Y_Offset);
goto2next(parse);
PDEBUG(DBG_PROBE, "Y_Offset=%d", usbvision_device_data[0].Y_Offset);
sscanf(parse,"%d",&usbvision_device_data[0].Dvi_yuv);
PDEBUG(DBG_PROBE, "Dvi_yuv=%d", usbvision_device_data[0].Dvi_yuv);
//add to usbvision_table also
usbvision_table[0].match_flags=USB_DEVICE_ID_MATCH_DEVICE;
usbvision_table[0].idVendor=usbvision_device_data[0].idVendor;
usbvision_table[0].idProduct=usbvision_device_data[0].idProduct;
}
}
/*
* usbvision_init()
*
* This code is run to initialize the driver.
*
*/
static int __init usbvision_init(void)
{
int errCode;
PDEBUG(DBG_PROBE, "");
PDEBUG(DBG_IOCTL, "IOCTL debugging is enabled [video]");
PDEBUG(DBG_IO, "IO debugging is enabled [video]");
PDEBUG(DBG_PROBE, "PROBE debugging is enabled [video]");
PDEBUG(DBG_MMAP, "MMAP debugging is enabled [video]");
/* disable planar mode support unless compression enabled */
if (isocMode != ISOC_MODE_COMPRESS ) {
// FIXME : not the right way to set supported flag
usbvision_v4l2_format[6].supported = 0; // V4L2_PIX_FMT_YVU420
usbvision_v4l2_format[7].supported = 0; // V4L2_PIX_FMT_YUV422P
}
customdevice_process();
errCode = usb_register(&usbvision_driver);
if (errCode == 0) {
info(DRIVER_DESC " : " USBVISION_VERSION_STRING);
PDEBUG(DBG_PROBE, "success");
}
return errCode;
}
static void __exit usbvision_exit(void)
{
PDEBUG(DBG_PROBE, "");
usb_deregister(&usbvision_driver);
PDEBUG(DBG_PROBE, "success");
}
module_init(usbvision_init);
module_exit(usbvision_exit);
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
* Local variables:
* c-basic-offset: 8
* End:
*/