| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * SDX75 SoC device tree source |
| * |
| * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| */ |
| |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/clock/qcom,sdx75-gcc.h> |
| #include <dt-bindings/dma/qcom-gpi.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interconnect/qcom,icc.h> |
| #include <dt-bindings/interconnect/qcom,sdx75.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/mailbox/qcom-ipcc.h> |
| #include <dt-bindings/power/qcom,rpmhpd.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&intc>; |
| |
| chosen: chosen { }; |
| |
| clocks { |
| xo_board: xo-board { |
| compatible = "fixed-clock"; |
| clock-frequency = <76800000>; |
| #clock-cells = <0>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <32000>; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0 0x0>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| power-domains = <&CPU_PD0>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| next-level-cache = <&L2_0>; |
| |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| L3_0: l3-cache { |
| compatible = "cache"; |
| cache-level = <3>; |
| cache-unified; |
| }; |
| }; |
| }; |
| |
| CPU1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0 0x100>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| power-domains = <&CPU_PD1>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| next-level-cache = <&L2_100>; |
| |
| L2_100: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0 0x200>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| power-domains = <&CPU_PD2>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| next-level-cache = <&L2_200>; |
| |
| L2_200: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0 0x300>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| power-domains = <&CPU_PD3>; |
| power-domain-names = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| next-level-cache = <&L2_300>; |
| |
| L2_300: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| CPU_OFF: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| entry-latency-us = <235>; |
| exit-latency-us = <428>; |
| min-residency-us = <1774>; |
| arm,psci-suspend-param = <0x40000003>; |
| local-timer-stop; |
| }; |
| |
| CPU_RAIL_OFF: cpu-rail-sleep-1 { |
| compatible = "arm,idle-state"; |
| entry-latency-us = <800>; |
| exit-latency-us = <750>; |
| min-residency-us = <4090>; |
| arm,psci-suspend-param = <0x40000004>; |
| local-timer-stop; |
| }; |
| |
| }; |
| |
| domain-idle-states { |
| CLUSTER_SLEEP_0: cluster-sleep-0 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x41000044>; |
| entry-latency-us = <1050>; |
| exit-latency-us = <2500>; |
| min-residency-us = <5309>; |
| }; |
| |
| CLUSTER_SLEEP_1: cluster-sleep-1 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x41001344>; |
| entry-latency-us = <2761>; |
| exit-latency-us = <3964>; |
| min-residency-us = <8467>; |
| }; |
| |
| CLUSTER_SLEEP_2: cluster-sleep-2 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x4100b344>; |
| entry-latency-us = <2793>; |
| exit-latency-us = <4023>; |
| min-residency-us = <9826>; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm-sdx75", "qcom,scm"; |
| }; |
| }; |
| |
| clk_virt: interconnect-0 { |
| compatible = "qcom,sdx75-clk-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| clocks = <&rpmhcc RPMH_QPIC_CLK>; |
| }; |
| |
| mc_virt: interconnect-1 { |
| compatible = "qcom,sdx75-mc-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x0 0x80000000 0x0 0x0>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a55-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| |
| CPU_PD0: power-domain-cpu0 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; |
| }; |
| |
| CPU_PD1: power-domain-cpu1 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; |
| }; |
| |
| CPU_PD2: power-domain-cpu2 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; |
| }; |
| |
| CPU_PD3: power-domain-cpu3 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; |
| }; |
| |
| CLUSTER_PD: power-domain-cpu-cluster0 { |
| #power-domain-cells = <0>; |
| domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1 &CLUSTER_SLEEP_2>; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| gunyah_hyp_mem: gunyah-hyp@80000000 { |
| reg = <0x0 0x80000000 0x0 0x800000>; |
| no-map; |
| }; |
| |
| hyp_elf_package_mem: hyp-elf-package@80800000 { |
| reg = <0x0 0x80800000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| access_control_db_mem: access-control-db@81380000 { |
| reg = <0x0 0x81380000 0x0 0x80000>; |
| no-map; |
| }; |
| |
| qteetz_mem: qteetz@814e0000 { |
| reg = <0x0 0x814e0000 0x0 0x2a0000>; |
| no-map; |
| }; |
| |
| trusted_apps_mem: trusted-apps@81780000 { |
| reg = <0x0 0x81780000 0x0 0xa00000>; |
| no-map; |
| }; |
| |
| xbl_ramdump_mem: xbl-ramdump@87a00000 { |
| reg = <0x0 0x87a00000 0x0 0x1c0000>; |
| no-map; |
| }; |
| |
| cpucp_fw_mem: cpucp-fw@87c00000 { |
| reg = <0x0 0x87c00000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| xbl_dtlog_mem: xbl-dtlog@87d00000 { |
| reg = <0x0 0x87d00000 0x0 0x40000>; |
| no-map; |
| }; |
| |
| xbl_sc_mem: xbl-sc@87d40000 { |
| reg = <0x0 0x87d40000 0x0 0x40000>; |
| no-map; |
| }; |
| |
| modem_efs_shared_mem: modem-efs-shared@87d80000 { |
| reg = <0x0 0x87d80000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| aop_image_mem: aop-image@87e00000 { |
| reg = <0x0 0x87e00000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| smem_mem: smem@87e20000 { |
| reg = <0x0 0x87e20000 0x0 0xc0000>; |
| no-map; |
| }; |
| |
| aop_cmd_db_mem: aop-cmd-db@87ee0000 { |
| compatible = "qcom,cmd-db"; |
| reg = <0x0 0x87ee0000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| aop_config_mem: aop-config@87f00000 { |
| reg = <0x0 0x87f00000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| ipa_fw_mem: ipa-fw@87f20000 { |
| reg = <0x0 0x87f20000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| secdata_mem: secdata@87f30000 { |
| reg = <0x0 0x87f30000 0x0 0x1000>; |
| no-map; |
| }; |
| |
| tme_crashdump_mem: tme-crashdump@87f31000 { |
| reg = <0x0 0x87f31000 0x0 0x40000>; |
| no-map; |
| }; |
| |
| tme_log_mem: tme-log@87f71000 { |
| reg = <0x0 0x87f71000 0x0 0x4000>; |
| no-map; |
| }; |
| |
| uefi_log_mem: uefi-log@87f75000 { |
| reg = <0x0 0x87f75000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| qdss_mem: qdss@88800000 { |
| reg = <0x0 0x88800000 0x0 0x300000>; |
| no-map; |
| }; |
| |
| audio_heap_mem: audio-heap@88b00000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x88b00000 0x0 0x400000>; |
| no-map; |
| }; |
| |
| mpss_dsmharq_mem: mpss-dsmharq@88f00000 { |
| reg = <0x0 0x88f00000 0x0 0x5080000>; |
| no-map; |
| }; |
| |
| q6_mpss_dtb_mem: q6-mpss-dtb@8df80000 { |
| reg = <0x0 0x8df80000 0x0 0x80000>; |
| no-map; |
| }; |
| |
| mpssadsp_mem: mpssadsp@8e000000 { |
| reg = <0x0 0x8e000000 0x0 0xf400000>; |
| no-map; |
| }; |
| |
| gunyah_trace_buffer_mem: gunyah-trace-buffer@bdb00000 { |
| reg = <0x0 0xbdb00000 0x0 0x2000000>; |
| no-map; |
| }; |
| |
| smmu_debug_buf_mem: smmu-debug-buf@bfb00000 { |
| reg = <0x0 0xbfb00000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| hyp_smmu_s2_pt_mem: hyp-smmu-s2-pt@bfc00000 { |
| reg = <0x0 0xbfc00000 0x0 0x400000>; |
| no-map; |
| }; |
| }; |
| |
| smp2p-modem { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <435>, <428>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <1>; |
| |
| smp2p_modem_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_modem_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| ipa_smp2p_out: ipa-ap-to-modem { |
| qcom,entry-name = "ipa"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| ipa_smp2p_in: ipa-modem-to-ap { |
| qcom,entry-name = "ipa"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smem: smem { |
| compatible = "qcom,smem"; |
| memory-region = <&smem_mem>; |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0 0 0 0 0x10 0>; |
| dma-ranges = <0 0 0 0 0x10 0>; |
| |
| gcc: clock-controller@80000 { |
| compatible = "qcom,sdx75-gcc"; |
| reg = <0x0 0x0080000 0x0 0x1f7400>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&sleep_clk>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| ipcc: mailbox@408000 { |
| compatible = "qcom,sdx75-ipcc", "qcom,ipcc"; |
| reg = <0 0x00408000 0 0x1000>; |
| interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #mbox-cells = <2>; |
| }; |
| |
| gpi_dma: dma-controller@900000 { |
| compatible = "qcom,sdx75-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0x0 0x00900000 0x0 0x60000>; |
| #dma-cells = <3>; |
| interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| dma-channels = <12>; |
| dma-channel-mask = <0x7f>; |
| iommus = <&apps_smmu 0xf6 0x0>; |
| status = "disabled"; |
| }; |
| |
| qupv3_id_0: geniqup@9c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0x009c0000 0x0 0x2000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| clock-names = "m-ahb", |
| "s-ahb"; |
| iommus = <&apps_smmu 0xe3 0x0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| |
| i2c0: i2c@980000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00980000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_i2c0_data_clk>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 0 QCOM_GPI_I2C>, |
| <&gpi_dma 1 0 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@980000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00980000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 0 QCOM_GPI_SPI>, |
| <&gpi_dma 1 0 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@984000 { |
| compatible = "qcom,geni-debug-uart"; |
| reg = <0x0 0x00984000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qupv3_se1_2uart_active>; |
| pinctrl-1 = <&qupv3_se1_2uart_sleep>; |
| pinctrl-names = "default", |
| "sleep"; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@988000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00988000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_i2c2_data_clk>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 2 QCOM_GPI_I2C>, |
| <&gpi_dma 1 2 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@988000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00988000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 2 QCOM_GPI_SPI>, |
| <&gpi_dma 1 2 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@98c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x0098c000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_i2c3_data_clk>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 3 QCOM_GPI_I2C>, |
| <&gpi_dma 1 3 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@98c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x0098c000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 3 QCOM_GPI_SPI>, |
| <&gpi_dma 1 3 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@990000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x00990000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_uart4_default>, <&qup_uart4_cts_rts>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@994000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00994000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_i2c5_data_clk>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 5 QCOM_GPI_I2C>, |
| <&gpi_dma 1 5 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@998000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00998000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_i2c6_data_clk>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 6 QCOM_GPI_I2C>, |
| <&gpi_dma 1 6 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi6: spi@998000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00998000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 6 QCOM_GPI_SPI>, |
| <&gpi_dma 1 6 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@99c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x0099c000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_i2c7_data_clk>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 7 QCOM_GPI_I2C>, |
| <&gpi_dma 1 7 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi7: spi@99c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x0099c000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; |
| pinctrl-names = "default"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| dmas = <&gpi_dma 0 7 QCOM_GPI_SPI>, |
| <&gpi_dma 1 7 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb_hsphy: phy@ff4000 { |
| compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy"; |
| reg = <0x0 0x00ff4000 0x0 0x154>; |
| #phy-cells = <0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_BCR>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_qmpphy: phy@ff6000 { |
| compatible = "qcom,sdx75-qmp-usb3-uni-phy"; |
| reg = <0x0 0x00ff6000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, |
| <&gcc GCC_USB2_CLKREF_EN>, |
| <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, |
| <&gcc GCC_USB3_PHY_PIPE_CLK>; |
| clock-names = "aux", |
| "ref", |
| "cfg_ahb", |
| "pipe"; |
| |
| power-domains = <&gcc GCC_USB3_PHY_GDSC>; |
| |
| resets = <&gcc GCC_USB3_PHY_BCR>, |
| <&gcc GCC_USB3PHY_PHY_BCR>; |
| reset-names = "phy", |
| "phy_phy"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "usb3_uni_phy_pipe_clk_src"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| system_noc: interconnect@1640000 { |
| compatible = "qcom,sdx75-system-noc"; |
| reg = <0x0 0x01640000 0x0 0x4b400>; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| pcie_anoc: interconnect@16c0000 { |
| compatible = "qcom,sdx75-pcie-anoc"; |
| reg = <0x0 0x016c0000 0x0 0x14200>; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| tcsr_mutex: hwlock@1f40000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x0 0x01f40000 0x0 0x40000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| tcsr: syscon@1fc0000 { |
| compatible = "qcom,sdx75-tcsr", "syscon"; |
| reg = <0x0 0x01fc0000 0x0 0x30000>; |
| }; |
| |
| sdhc: mmc@8804000 { |
| compatible = "qcom,sdx75-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0x0 0x08804000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", |
| "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| <&gcc GCC_SDCC1_APPS_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", |
| "core", |
| "xo"; |
| iommus = <&apps_smmu 0x00a0 0x0>; |
| qcom,dll-config = <0x0007442c>; |
| qcom,ddr-config = <0x80040868>; |
| power-domains = <&rpmhpd RPMHPD_CX>; |
| operating-points-v2 = <&sdhc1_opp_table>; |
| |
| interconnects = <&system_noc MASTER_SDCC_1 &mc_virt SLAVE_EBI1>, |
| <&gem_noc MASTER_APPSS_PROC &system_noc SLAVE_SDCC_1>; |
| interconnect-names = "sdhc-ddr", |
| "cpu-sdhc"; |
| bus-width = <4>; |
| dma-coherent; |
| |
| /* Forbid SDR104/SDR50 - broken hw! */ |
| sdhci-caps-mask = <0x3 0>; |
| |
| status = "disabled"; |
| |
| sdhc1_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-384000000 { |
| opp-hz = /bits/ 64 <384000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| usb: usb@a6f8800 { |
| compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; |
| reg = <0x0 0x0a6f8800 0x0 0x400>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, |
| <&gcc GCC_USB30_MASTER_CLK>, |
| <&gcc GCC_USB30_MSTR_AXI_CLK>, |
| <&gcc GCC_USB30_SLEEP_CLK>, |
| <&gcc GCC_USB30_MOCK_UTMI_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi"; |
| |
| assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 9 IRQ_TYPE_EDGE_RISING>, |
| <&pdc 10 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "hs_phy_irq", |
| "ss_phy_irq", |
| "dm_hs_phy_irq", |
| "dp_hs_phy_irq"; |
| |
| power-domains = <&gcc GCC_USB30_GDSC>; |
| |
| resets = <&gcc GCC_USB30_BCR>; |
| |
| interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "usb-ddr", |
| "apps-usb"; |
| |
| status = "disabled"; |
| |
| usb_dwc3: usb@a600000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x0a600000 0x0 0xcd00>; |
| interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&apps_smmu 0x80 0x0>; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| phys = <&usb_hsphy>, |
| <&usb_qmpphy>; |
| phy-names = "usb2-phy", |
| "usb3-phy"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_1_dwc3_hs: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_1_dwc3_ss: endpoint { |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| pdc: interrupt-controller@b220000 { |
| compatible = "qcom,sdx75-pdc", "qcom,pdc"; |
| reg = <0x0 0xb220000 0x0 0x30000>, |
| <0x0 0x174000f0 0x0 0x64>; |
| qcom,pdc-ranges = <0 147 52>, |
| <52 266 32>, |
| <84 500 59>; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&intc>; |
| interrupt-controller; |
| }; |
| |
| aoss_qmp: power-controller@c310000 { |
| compatible = "qcom,sdx75-aoss-qmp", "qcom,aoss-qmp"; |
| reg = <0 0x0c310000 0 0x1000>; |
| interrupt-parent = <&ipcc>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| #clock-cells = <0>; |
| }; |
| |
| spmi_bus: spmi@c400000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x0 0x0c400000 0x0 0x3000>, |
| <0x0 0x0c500000 0x0 0x400000>, |
| <0x0 0x0c440000 0x0 0x80000>, |
| <0x0 0x0c4c0000 0x0 0x10000>, |
| <0x0 0x0c42d000 0x0 0x4000>; |
| reg-names = "core", |
| "chnls", |
| "obsrvr", |
| "intr", |
| "cnfg"; |
| interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "periph_irq"; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| qcom,bus-id = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| tlmm: pinctrl@f000000 { |
| compatible = "qcom,sdx75-tlmm"; |
| reg = <0x0 0x0f000000 0x0 0x400000>; |
| interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&tlmm 0 0 133>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| wakeup-parent = <&pdc>; |
| |
| qup_i2c0_data_clk: qup-i2c0-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio8", "gpio9"; |
| function = "qup_se0"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c2_data_clk: qup-i2c2-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio14", "gpio15"; |
| function = "qup_se2"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c3_data_clk: qup-i2c3-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio52", "gpio53"; |
| function = "qup_se3"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c5_data_clk: qup-i2c5-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio110", "gpio111"; |
| function = "qup_se5"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c6_data_clk: qup-i2c6-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio112", "gpio113"; |
| function = "qup_se6"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c7_data_clk: qup-i2c7-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio116", "gpio117"; |
| function = "qup_se7"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_spi0_cs: qup-spi0-cs-state { |
| pins = "gpio11"; |
| function = "qup_se0"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_spi0_data_clk: qup-spi0-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio8", "gpio9", "gpio10"; |
| function = "qup_se0"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_spi2_cs: qup-spi2-cs-state { |
| pins = "gpio17"; |
| function = "qup_se2"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_spi2_data_clk: qup-spi2-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio14", "gpio15", "gpio16"; |
| function = "qup_se2"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_spi3_cs: qup-spi3-cs-state { |
| pins = "gpio55"; |
| function = "qup_se3"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_spi3_data_clk: qup-spi3-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio52", "gpio53", "gpio54"; |
| function = "qup_se3"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_spi6_cs: qup-spi6-cs-state { |
| pins = "gpio115"; |
| function = "qup_se6"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_spi6_data_clk: qup-spi6-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio112", "gpio113", "gpio114"; |
| function = "qup_se6"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_spi7_cs: qup-spi7-cs-state { |
| pins = "gpio119"; |
| function = "qup_se7"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_spi7_data_clk: qup-spi7-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio116", "gpio117", "gpio118"; |
| function = "qup_se7"; |
| drive-strength = <6>; |
| bias-pull-down; |
| }; |
| |
| qup_uart4_cts_rts: qup-uart4-cts-rts-state { |
| /* CTS, RTS */ |
| pins = "gpio52", "gpio53"; |
| function = "qup_se3"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| qup_uart4_default: qup-uart4-default-state { |
| /* TX, RX */ |
| pins = "gpio54", "gpio55"; |
| function = "qup_se3"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qupv3_se1_2uart_active: qupv3-se1-2uart-active-state { |
| tx-pins { |
| pins = "gpio12"; |
| function = "qup_se1_l2_mira"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| rx-pins { |
| pins = "gpio13"; |
| function = "qup_se1_l3_mira"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| qupv3_se1_2uart_sleep: qupv3-se1-2uart-sleep-state { |
| pins = "gpio12", "gpio13"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| sdc1_default: sdc1-default-state { |
| clk-pins { |
| pins = "sdc1_clk"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc1_cmd"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc1_data"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| }; |
| |
| sdc1_sleep: sdc1-sleep-state { |
| clk-pins { |
| pins = "sdc1_clk"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc1_cmd"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc1_data"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| }; |
| |
| apps_smmu: iommu@15000000 { |
| compatible = "qcom,sdx75-smmu-500", "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0x0 0x15000000 0x0 0x40000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <2>; |
| dma-coherent; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| intc: interrupt-controller@17200000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| #redistributor-regions = <1>; |
| redistributor-stride = <0x0 0x20000>; |
| reg = <0x0 0x17200000 0x0 0x10000>, |
| <0x0 0x17260000 0x0 0x80000>; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| timer@17420000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0 0x17420000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0x20000000>; |
| |
| frame@17421000 { |
| reg = <0x17421000 0x1000>, |
| <0x17422000 0x1000>; |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| frame@17423000 { |
| reg = <0x17423000 0x1000>; |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@17425000 { |
| reg = <0x17425000 0x1000>; |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@17427000 { |
| reg = <0x17427000 0x1000>; |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@17429000 { |
| reg = <0x17429000 0x1000>; |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@1742b000 { |
| reg = <0x1742b000 0x1000>; |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| frame@1742d000 { |
| reg = <0x1742d000 0x1000>; |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| }; |
| |
| apps_rsc: rsc@17a00000 { |
| label = "apps_rsc"; |
| compatible = "qcom,rpmh-rsc"; |
| reg = <0x0 0x17a00000 0x0 0x10000>, |
| <0x0 0x17a10000 0x0 0x10000>, |
| <0x0 0x17a20000 0x0 0x10000>; |
| reg-names = "drv-0", "drv-1", "drv-2"; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| |
| power-domains = <&CLUSTER_PD>; |
| qcom,tcs-offset = <0xd00>; |
| qcom,drv-id = <2>; |
| qcom,tcs-config = <ACTIVE_TCS 3>, |
| <SLEEP_TCS 2>, |
| <WAKE_TCS 2>, |
| <CONTROL_TCS 0>; |
| |
| apps_bcm_voter: bcm-voter { |
| compatible = "qcom,bcm-voter"; |
| }; |
| |
| rpmhcc: clock-controller { |
| compatible = "qcom,sdx75-rpmh-clk"; |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| #clock-cells = <1>; |
| }; |
| |
| rpmhpd: power-controller { |
| compatible = "qcom,sdx75-rpmhpd"; |
| #power-domain-cells = <1>; |
| operating-points-v2 = <&rpmhpd_opp_table>; |
| |
| rpmhpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmhpd_opp_ret: opp-16 { |
| opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| rpmhpd_opp_min_svs: opp-48 { |
| opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| }; |
| |
| rpmhpd_opp_low_svs: opp-64 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| rpmhpd_opp_svs: opp-128 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| |
| rpmhpd_opp_svs_l1: opp-192 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| }; |
| |
| rpmhpd_opp_nom: opp-256 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| }; |
| |
| rpmhpd_opp_nom_l1: opp-320 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| }; |
| |
| rpmhpd_opp_nom_l2: opp-336 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; |
| }; |
| |
| rpmhpd_opp_turbo: opp-384 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| }; |
| |
| rpmhpd_opp_turbo_l1: opp-416 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpufreq_hw: cpufreq@17d91000 { |
| compatible = "qcom,sdx75-cpufreq-epss", "qcom,cpufreq-epss"; |
| reg = <0x0 0x17d91000 0x0 0x1000>; |
| reg-names = "freq-domain0"; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GPLL0>; |
| clock-names = "xo", |
| "alternate"; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "dcvsh-irq-0"; |
| #freq-domain-cells = <1>; |
| #clock-cells = <1>; |
| }; |
| |
| dc_noc: interconnect@190e0000 { |
| compatible = "qcom,sdx75-dc-noc"; |
| reg = <0x0 0x190e0000 0x0 0x8200>; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| gem_noc: interconnect@19100000 { |
| compatible = "qcom,sdx75-gem-noc"; |
| reg = <0x0 0x19100000 0x0 0x34080>; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |