| /* |
| * Copyright © 2016 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| */ |
| |
| #include "i915_vma.h" |
| |
| #include "i915_drv.h" |
| #include "intel_ringbuffer.h" |
| #include "intel_frontbuffer.h" |
| |
| #include <drm/drm_gem.h> |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_ERRLOG_GEM) && IS_ENABLED(CONFIG_DRM_DEBUG_MM) |
| |
| #include <linux/stackdepot.h> |
| |
| static void vma_print_allocator(struct i915_vma *vma, const char *reason) |
| { |
| unsigned long entries[12]; |
| struct stack_trace trace = { |
| .entries = entries, |
| .max_entries = ARRAY_SIZE(entries), |
| }; |
| char buf[512]; |
| |
| if (!vma->node.stack) { |
| DRM_DEBUG_DRIVER("vma.node [%08llx + %08llx] %s: unknown owner\n", |
| vma->node.start, vma->node.size, reason); |
| return; |
| } |
| |
| depot_fetch_stack(vma->node.stack, &trace); |
| snprint_stack_trace(buf, sizeof(buf), &trace, 0); |
| DRM_DEBUG_DRIVER("vma.node [%08llx + %08llx] %s: inserted at %s\n", |
| vma->node.start, vma->node.size, reason, buf); |
| } |
| |
| #else |
| |
| static void vma_print_allocator(struct i915_vma *vma, const char *reason) |
| { |
| } |
| |
| #endif |
| |
| struct i915_vma_active { |
| struct i915_gem_active base; |
| struct i915_vma *vma; |
| struct rb_node node; |
| u64 timeline; |
| }; |
| |
| static void |
| __i915_vma_retire(struct i915_vma *vma, struct i915_request *rq) |
| { |
| struct drm_i915_gem_object *obj = vma->obj; |
| |
| GEM_BUG_ON(!i915_vma_is_active(vma)); |
| if (--vma->active_count) |
| return; |
| |
| GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); |
| list_move_tail(&vma->vm_link, &vma->vm->inactive_list); |
| |
| GEM_BUG_ON(!i915_gem_object_is_active(obj)); |
| if (--obj->active_count) |
| return; |
| |
| /* Prune the shared fence arrays iff completely idle (inc. external) */ |
| if (reservation_object_trylock(obj->resv)) { |
| if (reservation_object_test_signaled_rcu(obj->resv, true)) |
| reservation_object_add_excl_fence(obj->resv, NULL); |
| reservation_object_unlock(obj->resv); |
| } |
| |
| /* Bump our place on the bound list to keep it roughly in LRU order |
| * so that we don't steal from recently used but inactive objects |
| * (unless we are forced to ofc!) |
| */ |
| spin_lock(&rq->i915->mm.obj_lock); |
| if (obj->bind_count) |
| list_move_tail(&obj->mm.link, &rq->i915->mm.bound_list); |
| spin_unlock(&rq->i915->mm.obj_lock); |
| |
| obj->mm.dirty = true; /* be paranoid */ |
| |
| if (i915_gem_object_has_active_reference(obj)) { |
| i915_gem_object_clear_active_reference(obj); |
| i915_gem_object_put(obj); |
| } |
| } |
| |
| static void |
| i915_vma_retire(struct i915_gem_active *base, struct i915_request *rq) |
| { |
| struct i915_vma_active *active = |
| container_of(base, typeof(*active), base); |
| |
| __i915_vma_retire(active->vma, rq); |
| } |
| |
| static void |
| i915_vma_last_retire(struct i915_gem_active *base, struct i915_request *rq) |
| { |
| __i915_vma_retire(container_of(base, struct i915_vma, last_active), rq); |
| } |
| |
| static struct i915_vma * |
| vma_create(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm, |
| const struct i915_ggtt_view *view) |
| { |
| struct i915_vma *vma; |
| struct rb_node *rb, **p; |
| |
| /* The aliasing_ppgtt should never be used directly! */ |
| GEM_BUG_ON(vm == &vm->i915->mm.aliasing_ppgtt->vm); |
| |
| vma = kmem_cache_zalloc(vm->i915->vmas, GFP_KERNEL); |
| if (vma == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| vma->active = RB_ROOT; |
| |
| init_request_active(&vma->last_active, i915_vma_last_retire); |
| init_request_active(&vma->last_fence, NULL); |
| vma->vm = vm; |
| vma->ops = &vm->vma_ops; |
| vma->obj = obj; |
| vma->resv = obj->resv; |
| vma->size = obj->base.size; |
| vma->display_alignment = I915_GTT_MIN_ALIGNMENT; |
| |
| if (view && view->type != I915_GGTT_VIEW_NORMAL) { |
| vma->ggtt_view = *view; |
| if (view->type == I915_GGTT_VIEW_PARTIAL) { |
| GEM_BUG_ON(range_overflows_t(u64, |
| view->partial.offset, |
| view->partial.size, |
| obj->base.size >> PAGE_SHIFT)); |
| vma->size = view->partial.size; |
| vma->size <<= PAGE_SHIFT; |
| GEM_BUG_ON(vma->size > obj->base.size); |
| } else if (view->type == I915_GGTT_VIEW_ROTATED) { |
| vma->size = intel_rotation_info_size(&view->rotated); |
| vma->size <<= PAGE_SHIFT; |
| } |
| } |
| |
| if (unlikely(vma->size > vm->total)) |
| goto err_vma; |
| |
| GEM_BUG_ON(!IS_ALIGNED(vma->size, I915_GTT_PAGE_SIZE)); |
| |
| if (i915_is_ggtt(vm)) { |
| if (unlikely(overflows_type(vma->size, u32))) |
| goto err_vma; |
| |
| vma->fence_size = i915_gem_fence_size(vm->i915, vma->size, |
| i915_gem_object_get_tiling(obj), |
| i915_gem_object_get_stride(obj)); |
| if (unlikely(vma->fence_size < vma->size || /* overflow */ |
| vma->fence_size > vm->total)) |
| goto err_vma; |
| |
| GEM_BUG_ON(!IS_ALIGNED(vma->fence_size, I915_GTT_MIN_ALIGNMENT)); |
| |
| vma->fence_alignment = i915_gem_fence_alignment(vm->i915, vma->size, |
| i915_gem_object_get_tiling(obj), |
| i915_gem_object_get_stride(obj)); |
| GEM_BUG_ON(!is_power_of_2(vma->fence_alignment)); |
| |
| /* |
| * We put the GGTT vma at the start of the vma-list, followed |
| * by the ppGGTT vma. This allows us to break early when |
| * iterating over only the GGTT vma for an object, see |
| * for_each_ggtt_vma() |
| */ |
| vma->flags |= I915_VMA_GGTT; |
| list_add(&vma->obj_link, &obj->vma_list); |
| } else { |
| list_add_tail(&vma->obj_link, &obj->vma_list); |
| } |
| |
| rb = NULL; |
| p = &obj->vma_tree.rb_node; |
| while (*p) { |
| struct i915_vma *pos; |
| |
| rb = *p; |
| pos = rb_entry(rb, struct i915_vma, obj_node); |
| if (i915_vma_compare(pos, vm, view) < 0) |
| p = &rb->rb_right; |
| else |
| p = &rb->rb_left; |
| } |
| rb_link_node(&vma->obj_node, rb, p); |
| rb_insert_color(&vma->obj_node, &obj->vma_tree); |
| list_add(&vma->vm_link, &vm->unbound_list); |
| |
| return vma; |
| |
| err_vma: |
| kmem_cache_free(vm->i915->vmas, vma); |
| return ERR_PTR(-E2BIG); |
| } |
| |
| static struct i915_vma * |
| vma_lookup(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm, |
| const struct i915_ggtt_view *view) |
| { |
| struct rb_node *rb; |
| |
| rb = obj->vma_tree.rb_node; |
| while (rb) { |
| struct i915_vma *vma = rb_entry(rb, struct i915_vma, obj_node); |
| long cmp; |
| |
| cmp = i915_vma_compare(vma, vm, view); |
| if (cmp == 0) |
| return vma; |
| |
| if (cmp < 0) |
| rb = rb->rb_right; |
| else |
| rb = rb->rb_left; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * i915_vma_instance - return the singleton instance of the VMA |
| * @obj: parent &struct drm_i915_gem_object to be mapped |
| * @vm: address space in which the mapping is located |
| * @view: additional mapping requirements |
| * |
| * i915_vma_instance() looks up an existing VMA of the @obj in the @vm with |
| * the same @view characteristics. If a match is not found, one is created. |
| * Once created, the VMA is kept until either the object is freed, or the |
| * address space is closed. |
| * |
| * Must be called with struct_mutex held. |
| * |
| * Returns the vma, or an error pointer. |
| */ |
| struct i915_vma * |
| i915_vma_instance(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm, |
| const struct i915_ggtt_view *view) |
| { |
| struct i915_vma *vma; |
| |
| lockdep_assert_held(&obj->base.dev->struct_mutex); |
| GEM_BUG_ON(view && !i915_is_ggtt(vm)); |
| GEM_BUG_ON(vm->closed); |
| |
| vma = vma_lookup(obj, vm, view); |
| if (!vma) |
| vma = vma_create(obj, vm, view); |
| |
| GEM_BUG_ON(!IS_ERR(vma) && i915_vma_compare(vma, vm, view)); |
| GEM_BUG_ON(!IS_ERR(vma) && vma_lookup(obj, vm, view) != vma); |
| return vma; |
| } |
| |
| /** |
| * i915_vma_bind - Sets up PTEs for an VMA in it's corresponding address space. |
| * @vma: VMA to map |
| * @cache_level: mapping cache level |
| * @flags: flags like global or local mapping |
| * |
| * DMA addresses are taken from the scatter-gather table of this object (or of |
| * this VMA in case of non-default GGTT views) and PTE entries set up. |
| * Note that DMA addresses are also the only part of the SG table we care about. |
| */ |
| int i915_vma_bind(struct i915_vma *vma, enum i915_cache_level cache_level, |
| u32 flags) |
| { |
| u32 bind_flags; |
| u32 vma_flags; |
| int ret; |
| |
| GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); |
| GEM_BUG_ON(vma->size > vma->node.size); |
| |
| if (GEM_WARN_ON(range_overflows(vma->node.start, |
| vma->node.size, |
| vma->vm->total))) |
| return -ENODEV; |
| |
| if (GEM_WARN_ON(!flags)) |
| return -EINVAL; |
| |
| bind_flags = 0; |
| if (flags & PIN_GLOBAL) |
| bind_flags |= I915_VMA_GLOBAL_BIND; |
| if (flags & PIN_USER) |
| bind_flags |= I915_VMA_LOCAL_BIND; |
| |
| vma_flags = vma->flags & (I915_VMA_GLOBAL_BIND | I915_VMA_LOCAL_BIND); |
| if (flags & PIN_UPDATE) |
| bind_flags |= vma_flags; |
| else |
| bind_flags &= ~vma_flags; |
| if (bind_flags == 0) |
| return 0; |
| |
| GEM_BUG_ON(!vma->pages); |
| |
| trace_i915_vma_bind(vma, bind_flags); |
| ret = vma->ops->bind_vma(vma, cache_level, bind_flags); |
| if (ret) |
| return ret; |
| |
| vma->flags |= bind_flags; |
| return 0; |
| } |
| |
| void __iomem *i915_vma_pin_iomap(struct i915_vma *vma) |
| { |
| void __iomem *ptr; |
| int err; |
| |
| /* Access through the GTT requires the device to be awake. */ |
| assert_rpm_wakelock_held(vma->vm->i915); |
| |
| lockdep_assert_held(&vma->vm->i915->drm.struct_mutex); |
| if (WARN_ON(!i915_vma_is_map_and_fenceable(vma))) { |
| err = -ENODEV; |
| goto err; |
| } |
| |
| GEM_BUG_ON(!i915_vma_is_ggtt(vma)); |
| GEM_BUG_ON((vma->flags & I915_VMA_GLOBAL_BIND) == 0); |
| |
| ptr = vma->iomap; |
| if (ptr == NULL) { |
| ptr = io_mapping_map_wc(&i915_vm_to_ggtt(vma->vm)->iomap, |
| vma->node.start, |
| vma->node.size); |
| if (ptr == NULL) { |
| err = -ENOMEM; |
| goto err; |
| } |
| |
| vma->iomap = ptr; |
| } |
| |
| __i915_vma_pin(vma); |
| |
| err = i915_vma_pin_fence(vma); |
| if (err) |
| goto err_unpin; |
| |
| i915_vma_set_ggtt_write(vma); |
| return ptr; |
| |
| err_unpin: |
| __i915_vma_unpin(vma); |
| err: |
| return IO_ERR_PTR(err); |
| } |
| |
| void i915_vma_flush_writes(struct i915_vma *vma) |
| { |
| if (!i915_vma_has_ggtt_write(vma)) |
| return; |
| |
| i915_gem_flush_ggtt_writes(vma->vm->i915); |
| |
| i915_vma_unset_ggtt_write(vma); |
| } |
| |
| void i915_vma_unpin_iomap(struct i915_vma *vma) |
| { |
| lockdep_assert_held(&vma->vm->i915->drm.struct_mutex); |
| |
| GEM_BUG_ON(vma->iomap == NULL); |
| |
| i915_vma_flush_writes(vma); |
| |
| i915_vma_unpin_fence(vma); |
| i915_vma_unpin(vma); |
| } |
| |
| void i915_vma_unpin_and_release(struct i915_vma **p_vma) |
| { |
| struct i915_vma *vma; |
| struct drm_i915_gem_object *obj; |
| |
| vma = fetch_and_zero(p_vma); |
| if (!vma) |
| return; |
| |
| obj = vma->obj; |
| GEM_BUG_ON(!obj); |
| |
| i915_vma_unpin(vma); |
| i915_vma_close(vma); |
| |
| __i915_gem_object_release_unless_active(obj); |
| } |
| |
| bool i915_vma_misplaced(const struct i915_vma *vma, |
| u64 size, u64 alignment, u64 flags) |
| { |
| if (!drm_mm_node_allocated(&vma->node)) |
| return false; |
| |
| if (vma->node.size < size) |
| return true; |
| |
| GEM_BUG_ON(alignment && !is_power_of_2(alignment)); |
| if (alignment && !IS_ALIGNED(vma->node.start, alignment)) |
| return true; |
| |
| if (flags & PIN_MAPPABLE && !i915_vma_is_map_and_fenceable(vma)) |
| return true; |
| |
| if (flags & PIN_OFFSET_BIAS && |
| vma->node.start < (flags & PIN_OFFSET_MASK)) |
| return true; |
| |
| if (flags & PIN_OFFSET_FIXED && |
| vma->node.start != (flags & PIN_OFFSET_MASK)) |
| return true; |
| |
| return false; |
| } |
| |
| void __i915_vma_set_map_and_fenceable(struct i915_vma *vma) |
| { |
| bool mappable, fenceable; |
| |
| GEM_BUG_ON(!i915_vma_is_ggtt(vma)); |
| GEM_BUG_ON(!vma->fence_size); |
| |
| /* |
| * Explicitly disable for rotated VMA since the display does not |
| * need the fence and the VMA is not accessible to other users. |
| */ |
| if (vma->ggtt_view.type == I915_GGTT_VIEW_ROTATED) |
| return; |
| |
| fenceable = (vma->node.size >= vma->fence_size && |
| IS_ALIGNED(vma->node.start, vma->fence_alignment)); |
| |
| mappable = vma->node.start + vma->fence_size <= i915_vm_to_ggtt(vma->vm)->mappable_end; |
| |
| if (mappable && fenceable) |
| vma->flags |= I915_VMA_CAN_FENCE; |
| else |
| vma->flags &= ~I915_VMA_CAN_FENCE; |
| } |
| |
| static bool color_differs(struct drm_mm_node *node, unsigned long color) |
| { |
| return node->allocated && node->color != color; |
| } |
| |
| bool i915_gem_valid_gtt_space(struct i915_vma *vma, unsigned long cache_level) |
| { |
| struct drm_mm_node *node = &vma->node; |
| struct drm_mm_node *other; |
| |
| /* |
| * On some machines we have to be careful when putting differing types |
| * of snoopable memory together to avoid the prefetcher crossing memory |
| * domains and dying. During vm initialisation, we decide whether or not |
| * these constraints apply and set the drm_mm.color_adjust |
| * appropriately. |
| */ |
| if (vma->vm->mm.color_adjust == NULL) |
| return true; |
| |
| /* Only valid to be called on an already inserted vma */ |
| GEM_BUG_ON(!drm_mm_node_allocated(node)); |
| GEM_BUG_ON(list_empty(&node->node_list)); |
| |
| other = list_prev_entry(node, node_list); |
| if (color_differs(other, cache_level) && !drm_mm_hole_follows(other)) |
| return false; |
| |
| other = list_next_entry(node, node_list); |
| if (color_differs(other, cache_level) && !drm_mm_hole_follows(node)) |
| return false; |
| |
| return true; |
| } |
| |
| static void assert_bind_count(const struct drm_i915_gem_object *obj) |
| { |
| /* |
| * Combine the assertion that the object is bound and that we have |
| * pinned its pages. But we should never have bound the object |
| * more than we have pinned its pages. (For complete accuracy, we |
| * assume that no else is pinning the pages, but as a rough assertion |
| * that we will not run into problems later, this will do!) |
| */ |
| GEM_BUG_ON(atomic_read(&obj->mm.pages_pin_count) < obj->bind_count); |
| } |
| |
| /** |
| * i915_vma_insert - finds a slot for the vma in its address space |
| * @vma: the vma |
| * @size: requested size in bytes (can be larger than the VMA) |
| * @alignment: required alignment |
| * @flags: mask of PIN_* flags to use |
| * |
| * First we try to allocate some free space that meets the requirements for |
| * the VMA. Failiing that, if the flags permit, it will evict an old VMA, |
| * preferrably the oldest idle entry to make room for the new VMA. |
| * |
| * Returns: |
| * 0 on success, negative error code otherwise. |
| */ |
| static int |
| i915_vma_insert(struct i915_vma *vma, u64 size, u64 alignment, u64 flags) |
| { |
| struct drm_i915_private *dev_priv = vma->vm->i915; |
| unsigned int cache_level; |
| u64 start, end; |
| int ret; |
| |
| GEM_BUG_ON(i915_vma_is_closed(vma)); |
| GEM_BUG_ON(vma->flags & (I915_VMA_GLOBAL_BIND | I915_VMA_LOCAL_BIND)); |
| GEM_BUG_ON(drm_mm_node_allocated(&vma->node)); |
| |
| size = max(size, vma->size); |
| alignment = max(alignment, vma->display_alignment); |
| if (flags & PIN_MAPPABLE) { |
| size = max_t(typeof(size), size, vma->fence_size); |
| alignment = max_t(typeof(alignment), |
| alignment, vma->fence_alignment); |
| } |
| |
| GEM_BUG_ON(!IS_ALIGNED(size, I915_GTT_PAGE_SIZE)); |
| GEM_BUG_ON(!IS_ALIGNED(alignment, I915_GTT_MIN_ALIGNMENT)); |
| GEM_BUG_ON(!is_power_of_2(alignment)); |
| |
| start = flags & PIN_OFFSET_BIAS ? flags & PIN_OFFSET_MASK : 0; |
| GEM_BUG_ON(!IS_ALIGNED(start, I915_GTT_PAGE_SIZE)); |
| |
| end = vma->vm->total; |
| if (flags & PIN_MAPPABLE) |
| end = min_t(u64, end, dev_priv->ggtt.mappable_end); |
| if (flags & PIN_ZONE_4G) |
| end = min_t(u64, end, (1ULL << 32) - I915_GTT_PAGE_SIZE); |
| GEM_BUG_ON(!IS_ALIGNED(end, I915_GTT_PAGE_SIZE)); |
| |
| /* If binding the object/GGTT view requires more space than the entire |
| * aperture has, reject it early before evicting everything in a vain |
| * attempt to find space. |
| */ |
| if (size > end) { |
| DRM_DEBUG("Attempting to bind an object larger than the aperture: request=%llu > %s aperture=%llu\n", |
| size, flags & PIN_MAPPABLE ? "mappable" : "total", |
| end); |
| return -ENOSPC; |
| } |
| |
| if (vma->obj) { |
| ret = i915_gem_object_pin_pages(vma->obj); |
| if (ret) |
| return ret; |
| |
| cache_level = vma->obj->cache_level; |
| } else { |
| cache_level = 0; |
| } |
| |
| GEM_BUG_ON(vma->pages); |
| |
| ret = vma->ops->set_pages(vma); |
| if (ret) |
| goto err_unpin; |
| |
| if (flags & PIN_OFFSET_FIXED) { |
| u64 offset = flags & PIN_OFFSET_MASK; |
| if (!IS_ALIGNED(offset, alignment) || |
| range_overflows(offset, size, end)) { |
| ret = -EINVAL; |
| goto err_clear; |
| } |
| |
| ret = i915_gem_gtt_reserve(vma->vm, &vma->node, |
| size, offset, cache_level, |
| flags); |
| if (ret) |
| goto err_clear; |
| } else { |
| /* |
| * We only support huge gtt pages through the 48b PPGTT, |
| * however we also don't want to force any alignment for |
| * objects which need to be tightly packed into the low 32bits. |
| * |
| * Note that we assume that GGTT are limited to 4GiB for the |
| * forseeable future. See also i915_ggtt_offset(). |
| */ |
| if (upper_32_bits(end - 1) && |
| vma->page_sizes.sg > I915_GTT_PAGE_SIZE) { |
| /* |
| * We can't mix 64K and 4K PTEs in the same page-table |
| * (2M block), and so to avoid the ugliness and |
| * complexity of coloring we opt for just aligning 64K |
| * objects to 2M. |
| */ |
| u64 page_alignment = |
| rounddown_pow_of_two(vma->page_sizes.sg | |
| I915_GTT_PAGE_SIZE_2M); |
| |
| /* |
| * Check we don't expand for the limited Global GTT |
| * (mappable aperture is even more precious!). This |
| * also checks that we exclude the aliasing-ppgtt. |
| */ |
| GEM_BUG_ON(i915_vma_is_ggtt(vma)); |
| |
| alignment = max(alignment, page_alignment); |
| |
| if (vma->page_sizes.sg & I915_GTT_PAGE_SIZE_64K) |
| size = round_up(size, I915_GTT_PAGE_SIZE_2M); |
| } |
| |
| ret = i915_gem_gtt_insert(vma->vm, &vma->node, |
| size, alignment, cache_level, |
| start, end, flags); |
| if (ret) |
| goto err_clear; |
| |
| GEM_BUG_ON(vma->node.start < start); |
| GEM_BUG_ON(vma->node.start + vma->node.size > end); |
| } |
| GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); |
| GEM_BUG_ON(!i915_gem_valid_gtt_space(vma, cache_level)); |
| |
| list_move_tail(&vma->vm_link, &vma->vm->inactive_list); |
| |
| if (vma->obj) { |
| struct drm_i915_gem_object *obj = vma->obj; |
| |
| spin_lock(&dev_priv->mm.obj_lock); |
| list_move_tail(&obj->mm.link, &dev_priv->mm.bound_list); |
| obj->bind_count++; |
| spin_unlock(&dev_priv->mm.obj_lock); |
| |
| assert_bind_count(obj); |
| } |
| |
| return 0; |
| |
| err_clear: |
| vma->ops->clear_pages(vma); |
| err_unpin: |
| if (vma->obj) |
| i915_gem_object_unpin_pages(vma->obj); |
| return ret; |
| } |
| |
| static void |
| i915_vma_remove(struct i915_vma *vma) |
| { |
| struct drm_i915_private *i915 = vma->vm->i915; |
| |
| GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); |
| GEM_BUG_ON(vma->flags & (I915_VMA_GLOBAL_BIND | I915_VMA_LOCAL_BIND)); |
| |
| vma->ops->clear_pages(vma); |
| |
| drm_mm_remove_node(&vma->node); |
| list_move_tail(&vma->vm_link, &vma->vm->unbound_list); |
| |
| /* |
| * Since the unbound list is global, only move to that list if |
| * no more VMAs exist. |
| */ |
| if (vma->obj) { |
| struct drm_i915_gem_object *obj = vma->obj; |
| |
| spin_lock(&i915->mm.obj_lock); |
| if (--obj->bind_count == 0) |
| list_move_tail(&obj->mm.link, &i915->mm.unbound_list); |
| spin_unlock(&i915->mm.obj_lock); |
| |
| /* |
| * And finally now the object is completely decoupled from this |
| * vma, we can drop its hold on the backing storage and allow |
| * it to be reaped by the shrinker. |
| */ |
| i915_gem_object_unpin_pages(obj); |
| assert_bind_count(obj); |
| } |
| } |
| |
| int __i915_vma_do_pin(struct i915_vma *vma, |
| u64 size, u64 alignment, u64 flags) |
| { |
| const unsigned int bound = vma->flags; |
| int ret; |
| |
| lockdep_assert_held(&vma->vm->i915->drm.struct_mutex); |
| GEM_BUG_ON((flags & (PIN_GLOBAL | PIN_USER)) == 0); |
| GEM_BUG_ON((flags & PIN_GLOBAL) && !i915_vma_is_ggtt(vma)); |
| |
| if (WARN_ON(bound & I915_VMA_PIN_OVERFLOW)) { |
| ret = -EBUSY; |
| goto err_unpin; |
| } |
| |
| if ((bound & I915_VMA_BIND_MASK) == 0) { |
| ret = i915_vma_insert(vma, size, alignment, flags); |
| if (ret) |
| goto err_unpin; |
| } |
| GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); |
| |
| ret = i915_vma_bind(vma, vma->obj ? vma->obj->cache_level : 0, flags); |
| if (ret) |
| goto err_remove; |
| |
| GEM_BUG_ON((vma->flags & I915_VMA_BIND_MASK) == 0); |
| |
| if ((bound ^ vma->flags) & I915_VMA_GLOBAL_BIND) |
| __i915_vma_set_map_and_fenceable(vma); |
| |
| GEM_BUG_ON(i915_vma_misplaced(vma, size, alignment, flags)); |
| return 0; |
| |
| err_remove: |
| if ((bound & I915_VMA_BIND_MASK) == 0) { |
| i915_vma_remove(vma); |
| GEM_BUG_ON(vma->pages); |
| GEM_BUG_ON(vma->flags & I915_VMA_BIND_MASK); |
| } |
| err_unpin: |
| __i915_vma_unpin(vma); |
| return ret; |
| } |
| |
| void i915_vma_close(struct i915_vma *vma) |
| { |
| lockdep_assert_held(&vma->vm->i915->drm.struct_mutex); |
| |
| GEM_BUG_ON(i915_vma_is_closed(vma)); |
| vma->flags |= I915_VMA_CLOSED; |
| |
| /* |
| * We defer actually closing, unbinding and destroying the VMA until |
| * the next idle point, or if the object is freed in the meantime. By |
| * postponing the unbind, we allow for it to be resurrected by the |
| * client, avoiding the work required to rebind the VMA. This is |
| * advantageous for DRI, where the client/server pass objects |
| * between themselves, temporarily opening a local VMA to the |
| * object, and then closing it again. The same object is then reused |
| * on the next frame (or two, depending on the depth of the swap queue) |
| * causing us to rebind the VMA once more. This ends up being a lot |
| * of wasted work for the steady state. |
| */ |
| list_add_tail(&vma->closed_link, &vma->vm->i915->gt.closed_vma); |
| } |
| |
| void i915_vma_reopen(struct i915_vma *vma) |
| { |
| lockdep_assert_held(&vma->vm->i915->drm.struct_mutex); |
| |
| if (vma->flags & I915_VMA_CLOSED) { |
| vma->flags &= ~I915_VMA_CLOSED; |
| list_del(&vma->closed_link); |
| } |
| } |
| |
| static void __i915_vma_destroy(struct i915_vma *vma) |
| { |
| struct drm_i915_private *i915 = vma->vm->i915; |
| struct i915_vma_active *iter, *n; |
| |
| GEM_BUG_ON(vma->node.allocated); |
| GEM_BUG_ON(vma->fence); |
| |
| GEM_BUG_ON(i915_gem_active_isset(&vma->last_fence)); |
| |
| list_del(&vma->obj_link); |
| list_del(&vma->vm_link); |
| if (vma->obj) |
| rb_erase(&vma->obj_node, &vma->obj->vma_tree); |
| |
| rbtree_postorder_for_each_entry_safe(iter, n, &vma->active, node) { |
| GEM_BUG_ON(i915_gem_active_isset(&iter->base)); |
| kfree(iter); |
| } |
| |
| kmem_cache_free(i915->vmas, vma); |
| } |
| |
| void i915_vma_destroy(struct i915_vma *vma) |
| { |
| lockdep_assert_held(&vma->vm->i915->drm.struct_mutex); |
| |
| GEM_BUG_ON(i915_vma_is_active(vma)); |
| GEM_BUG_ON(i915_vma_is_pinned(vma)); |
| |
| if (i915_vma_is_closed(vma)) |
| list_del(&vma->closed_link); |
| |
| WARN_ON(i915_vma_unbind(vma)); |
| __i915_vma_destroy(vma); |
| } |
| |
| void i915_vma_parked(struct drm_i915_private *i915) |
| { |
| struct i915_vma *vma, *next; |
| |
| list_for_each_entry_safe(vma, next, &i915->gt.closed_vma, closed_link) { |
| GEM_BUG_ON(!i915_vma_is_closed(vma)); |
| i915_vma_destroy(vma); |
| } |
| |
| GEM_BUG_ON(!list_empty(&i915->gt.closed_vma)); |
| } |
| |
| static void __i915_vma_iounmap(struct i915_vma *vma) |
| { |
| GEM_BUG_ON(i915_vma_is_pinned(vma)); |
| |
| if (vma->iomap == NULL) |
| return; |
| |
| io_mapping_unmap(vma->iomap); |
| vma->iomap = NULL; |
| } |
| |
| void i915_vma_revoke_mmap(struct i915_vma *vma) |
| { |
| struct drm_vma_offset_node *node = &vma->obj->base.vma_node; |
| u64 vma_offset; |
| |
| lockdep_assert_held(&vma->vm->i915->drm.struct_mutex); |
| |
| if (!i915_vma_has_userfault(vma)) |
| return; |
| |
| GEM_BUG_ON(!i915_vma_is_map_and_fenceable(vma)); |
| GEM_BUG_ON(!vma->obj->userfault_count); |
| |
| vma_offset = vma->ggtt_view.partial.offset << PAGE_SHIFT; |
| unmap_mapping_range(vma->vm->i915->drm.anon_inode->i_mapping, |
| drm_vma_node_offset_addr(node) + vma_offset, |
| vma->size, |
| 1); |
| |
| i915_vma_unset_userfault(vma); |
| if (!--vma->obj->userfault_count) |
| list_del(&vma->obj->userfault_link); |
| } |
| |
| static void export_fence(struct i915_vma *vma, |
| struct i915_request *rq, |
| unsigned int flags) |
| { |
| struct reservation_object *resv = vma->resv; |
| |
| /* |
| * Ignore errors from failing to allocate the new fence, we can't |
| * handle an error right now. Worst case should be missed |
| * synchronisation leading to rendering corruption. |
| */ |
| reservation_object_lock(resv, NULL); |
| if (flags & EXEC_OBJECT_WRITE) |
| reservation_object_add_excl_fence(resv, &rq->fence); |
| else if (reservation_object_reserve_shared(resv) == 0) |
| reservation_object_add_shared_fence(resv, &rq->fence); |
| reservation_object_unlock(resv); |
| } |
| |
| static struct i915_gem_active *active_instance(struct i915_vma *vma, u64 idx) |
| { |
| struct i915_vma_active *active; |
| struct rb_node **p, *parent; |
| struct i915_request *old; |
| |
| /* |
| * We track the most recently used timeline to skip a rbtree search |
| * for the common case, under typical loads we never need the rbtree |
| * at all. We can reuse the last_active slot if it is empty, that is |
| * after the previous activity has been retired, or if the active |
| * matches the current timeline. |
| * |
| * Note that we allow the timeline to be active simultaneously in |
| * the rbtree and the last_active cache. We do this to avoid having |
| * to search and replace the rbtree element for a new timeline, with |
| * the cost being that we must be aware that the vma may be retired |
| * twice for the same timeline (as the older rbtree element will be |
| * retired before the new request added to last_active). |
| */ |
| old = i915_gem_active_raw(&vma->last_active, |
| &vma->vm->i915->drm.struct_mutex); |
| if (!old || old->fence.context == idx) |
| goto out; |
| |
| /* Move the currently active fence into the rbtree */ |
| idx = old->fence.context; |
| |
| parent = NULL; |
| p = &vma->active.rb_node; |
| while (*p) { |
| parent = *p; |
| |
| active = rb_entry(parent, struct i915_vma_active, node); |
| if (active->timeline == idx) |
| goto replace; |
| |
| if (active->timeline < idx) |
| p = &parent->rb_right; |
| else |
| p = &parent->rb_left; |
| } |
| |
| active = kmalloc(sizeof(*active), GFP_KERNEL); |
| |
| /* kmalloc may retire the vma->last_active request (thanks shrinker)! */ |
| if (unlikely(!i915_gem_active_raw(&vma->last_active, |
| &vma->vm->i915->drm.struct_mutex))) { |
| kfree(active); |
| goto out; |
| } |
| |
| if (unlikely(!active)) |
| return ERR_PTR(-ENOMEM); |
| |
| init_request_active(&active->base, i915_vma_retire); |
| active->vma = vma; |
| active->timeline = idx; |
| |
| rb_link_node(&active->node, parent, p); |
| rb_insert_color(&active->node, &vma->active); |
| |
| replace: |
| /* |
| * Overwrite the previous active slot in the rbtree with last_active, |
| * leaving last_active zeroed. If the previous slot is still active, |
| * we must be careful as we now only expect to receive one retire |
| * callback not two, and so much undo the active counting for the |
| * overwritten slot. |
| */ |
| if (i915_gem_active_isset(&active->base)) { |
| /* Retire ourselves from the old rq->active_list */ |
| __list_del_entry(&active->base.link); |
| vma->active_count--; |
| GEM_BUG_ON(!vma->active_count); |
| } |
| GEM_BUG_ON(list_empty(&vma->last_active.link)); |
| list_replace_init(&vma->last_active.link, &active->base.link); |
| active->base.request = fetch_and_zero(&vma->last_active.request); |
| |
| out: |
| return &vma->last_active; |
| } |
| |
| int i915_vma_move_to_active(struct i915_vma *vma, |
| struct i915_request *rq, |
| unsigned int flags) |
| { |
| struct drm_i915_gem_object *obj = vma->obj; |
| struct i915_gem_active *active; |
| |
| lockdep_assert_held(&rq->i915->drm.struct_mutex); |
| GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); |
| |
| active = active_instance(vma, rq->fence.context); |
| if (IS_ERR(active)) |
| return PTR_ERR(active); |
| |
| /* |
| * Add a reference if we're newly entering the active list. |
| * The order in which we add operations to the retirement queue is |
| * vital here: mark_active adds to the start of the callback list, |
| * such that subsequent callbacks are called first. Therefore we |
| * add the active reference first and queue for it to be dropped |
| * *last*. |
| */ |
| if (!i915_gem_active_isset(active) && !vma->active_count++) { |
| list_move_tail(&vma->vm_link, &vma->vm->active_list); |
| obj->active_count++; |
| } |
| i915_gem_active_set(active, rq); |
| GEM_BUG_ON(!i915_vma_is_active(vma)); |
| GEM_BUG_ON(!obj->active_count); |
| |
| obj->write_domain = 0; |
| if (flags & EXEC_OBJECT_WRITE) { |
| obj->write_domain = I915_GEM_DOMAIN_RENDER; |
| |
| if (intel_fb_obj_invalidate(obj, ORIGIN_CS)) |
| i915_gem_active_set(&obj->frontbuffer_write, rq); |
| |
| obj->read_domains = 0; |
| } |
| obj->read_domains |= I915_GEM_GPU_DOMAINS; |
| |
| if (flags & EXEC_OBJECT_NEEDS_FENCE) |
| i915_gem_active_set(&vma->last_fence, rq); |
| |
| export_fence(vma, rq, flags); |
| return 0; |
| } |
| |
| int i915_vma_unbind(struct i915_vma *vma) |
| { |
| int ret; |
| |
| lockdep_assert_held(&vma->vm->i915->drm.struct_mutex); |
| |
| /* |
| * First wait upon any activity as retiring the request may |
| * have side-effects such as unpinning or even unbinding this vma. |
| */ |
| might_sleep(); |
| if (i915_vma_is_active(vma)) { |
| struct i915_vma_active *active, *n; |
| |
| /* |
| * When a closed VMA is retired, it is unbound - eek. |
| * In order to prevent it from being recursively closed, |
| * take a pin on the vma so that the second unbind is |
| * aborted. |
| * |
| * Even more scary is that the retire callback may free |
| * the object (last active vma). To prevent the explosion |
| * we defer the actual object free to a worker that can |
| * only proceed once it acquires the struct_mutex (which |
| * we currently hold, therefore it cannot free this object |
| * before we are finished). |
| */ |
| __i915_vma_pin(vma); |
| |
| ret = i915_gem_active_retire(&vma->last_active, |
| &vma->vm->i915->drm.struct_mutex); |
| if (ret) |
| goto unpin; |
| |
| rbtree_postorder_for_each_entry_safe(active, n, |
| &vma->active, node) { |
| ret = i915_gem_active_retire(&active->base, |
| &vma->vm->i915->drm.struct_mutex); |
| if (ret) |
| goto unpin; |
| } |
| |
| ret = i915_gem_active_retire(&vma->last_fence, |
| &vma->vm->i915->drm.struct_mutex); |
| unpin: |
| __i915_vma_unpin(vma); |
| if (ret) |
| return ret; |
| } |
| GEM_BUG_ON(i915_vma_is_active(vma)); |
| |
| if (i915_vma_is_pinned(vma)) { |
| vma_print_allocator(vma, "is pinned"); |
| return -EBUSY; |
| } |
| |
| if (!drm_mm_node_allocated(&vma->node)) |
| return 0; |
| |
| if (i915_vma_is_map_and_fenceable(vma)) { |
| /* |
| * Check that we have flushed all writes through the GGTT |
| * before the unbind, other due to non-strict nature of those |
| * indirect writes they may end up referencing the GGTT PTE |
| * after the unbind. |
| */ |
| i915_vma_flush_writes(vma); |
| GEM_BUG_ON(i915_vma_has_ggtt_write(vma)); |
| |
| /* release the fence reg _after_ flushing */ |
| ret = i915_vma_put_fence(vma); |
| if (ret) |
| return ret; |
| |
| /* Force a pagefault for domain tracking on next user access */ |
| i915_vma_revoke_mmap(vma); |
| |
| __i915_vma_iounmap(vma); |
| vma->flags &= ~I915_VMA_CAN_FENCE; |
| } |
| GEM_BUG_ON(vma->fence); |
| GEM_BUG_ON(i915_vma_has_userfault(vma)); |
| |
| if (likely(!vma->vm->closed)) { |
| trace_i915_vma_unbind(vma); |
| vma->ops->unbind_vma(vma); |
| } |
| vma->flags &= ~(I915_VMA_GLOBAL_BIND | I915_VMA_LOCAL_BIND); |
| |
| i915_vma_remove(vma); |
| |
| return 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_SELFTEST) |
| #include "selftests/i915_vma.c" |
| #endif |