| /* |
| * I2C slave mode EEPROM simulator |
| * |
| * Copyright (C) 2014 by Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> |
| * Copyright (C) 2014 by Renesas Electronics Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; version 2 of the License. |
| * |
| * Because most IP blocks can only detect one I2C slave address anyhow, this |
| * driver does not support simulating EEPROM types which take more than one |
| * address. It is prepared to simulate bigger EEPROMs with an internal 16 bit |
| * pointer, yet implementation is deferred until the need actually arises. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/sysfs.h> |
| |
| struct eeprom_data { |
| struct bin_attribute bin; |
| bool first_write; |
| spinlock_t buffer_lock; |
| u8 buffer_idx; |
| u8 buffer[]; |
| }; |
| |
| static int i2c_slave_eeprom_slave_cb(struct i2c_client *client, |
| enum i2c_slave_event event, u8 *val) |
| { |
| struct eeprom_data *eeprom = i2c_get_clientdata(client); |
| |
| switch (event) { |
| case I2C_SLAVE_WRITE_RECEIVED: |
| if (eeprom->first_write) { |
| eeprom->buffer_idx = *val; |
| eeprom->first_write = false; |
| } else { |
| spin_lock(&eeprom->buffer_lock); |
| eeprom->buffer[eeprom->buffer_idx++] = *val; |
| spin_unlock(&eeprom->buffer_lock); |
| } |
| break; |
| |
| case I2C_SLAVE_READ_PROCESSED: |
| /* The previous byte made it to the bus, get next one */ |
| eeprom->buffer_idx++; |
| /* fallthrough */ |
| case I2C_SLAVE_READ_REQUESTED: |
| spin_lock(&eeprom->buffer_lock); |
| *val = eeprom->buffer[eeprom->buffer_idx]; |
| spin_unlock(&eeprom->buffer_lock); |
| /* |
| * Do not increment buffer_idx here, because we don't know if |
| * this byte will be actually used. Read Linux I2C slave docs |
| * for details. |
| */ |
| break; |
| |
| case I2C_SLAVE_STOP: |
| case I2C_SLAVE_WRITE_REQUESTED: |
| eeprom->first_write = true; |
| break; |
| |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t i2c_slave_eeprom_bin_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, char *buf, loff_t off, size_t count) |
| { |
| struct eeprom_data *eeprom; |
| unsigned long flags; |
| |
| eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj)); |
| |
| spin_lock_irqsave(&eeprom->buffer_lock, flags); |
| memcpy(buf, &eeprom->buffer[off], count); |
| spin_unlock_irqrestore(&eeprom->buffer_lock, flags); |
| |
| return count; |
| } |
| |
| static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, char *buf, loff_t off, size_t count) |
| { |
| struct eeprom_data *eeprom; |
| unsigned long flags; |
| |
| eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj)); |
| |
| spin_lock_irqsave(&eeprom->buffer_lock, flags); |
| memcpy(&eeprom->buffer[off], buf, count); |
| spin_unlock_irqrestore(&eeprom->buffer_lock, flags); |
| |
| return count; |
| } |
| |
| static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| { |
| struct eeprom_data *eeprom; |
| int ret; |
| unsigned size = id->driver_data; |
| |
| eeprom = devm_kzalloc(&client->dev, sizeof(struct eeprom_data) + size, GFP_KERNEL); |
| if (!eeprom) |
| return -ENOMEM; |
| |
| eeprom->first_write = true; |
| spin_lock_init(&eeprom->buffer_lock); |
| i2c_set_clientdata(client, eeprom); |
| |
| sysfs_bin_attr_init(&eeprom->bin); |
| eeprom->bin.attr.name = "slave-eeprom"; |
| eeprom->bin.attr.mode = S_IRUSR | S_IWUSR; |
| eeprom->bin.read = i2c_slave_eeprom_bin_read; |
| eeprom->bin.write = i2c_slave_eeprom_bin_write; |
| eeprom->bin.size = size; |
| |
| ret = sysfs_create_bin_file(&client->dev.kobj, &eeprom->bin); |
| if (ret) |
| return ret; |
| |
| ret = i2c_slave_register(client, i2c_slave_eeprom_slave_cb); |
| if (ret) { |
| sysfs_remove_bin_file(&client->dev.kobj, &eeprom->bin); |
| return ret; |
| } |
| |
| return 0; |
| }; |
| |
| static int i2c_slave_eeprom_remove(struct i2c_client *client) |
| { |
| struct eeprom_data *eeprom = i2c_get_clientdata(client); |
| |
| i2c_slave_unregister(client); |
| sysfs_remove_bin_file(&client->dev.kobj, &eeprom->bin); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id i2c_slave_eeprom_id[] = { |
| { "slave-24c02", 2048 / 8 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, i2c_slave_eeprom_id); |
| |
| static struct i2c_driver i2c_slave_eeprom_driver = { |
| .driver = { |
| .name = "i2c-slave-eeprom", |
| }, |
| .probe = i2c_slave_eeprom_probe, |
| .remove = i2c_slave_eeprom_remove, |
| .id_table = i2c_slave_eeprom_id, |
| }; |
| module_i2c_driver(i2c_slave_eeprom_driver); |
| |
| MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>"); |
| MODULE_DESCRIPTION("I2C slave mode EEPROM simulator"); |
| MODULE_LICENSE("GPL v2"); |