| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/clk-provider.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/slab.h> |
| |
| #include <dt-bindings/clock/at91.h> |
| |
| #include "pmc.h" |
| |
| static DEFINE_SPINLOCK(mck_lock); |
| |
| static const struct clk_master_characteristics mck_characteristics = { |
| .output = { .min = 0, .max = 166000000 }, |
| .divisors = { 1, 2, 4, 3 }, |
| }; |
| |
| static u8 plla_out[] = { 0 }; |
| |
| static u16 plla_icpll[] = { 0 }; |
| |
| static const struct clk_range plla_outputs[] = { |
| { .min = 400000000, .max = 1000000000 }, |
| }; |
| |
| static const struct clk_pll_characteristics plla_characteristics = { |
| .input = { .min = 8000000, .max = 50000000 }, |
| .num_output = ARRAY_SIZE(plla_outputs), |
| .output = plla_outputs, |
| .icpll = plla_icpll, |
| .out = plla_out, |
| }; |
| |
| static const struct clk_pcr_layout sama5d3_pcr_layout = { |
| .offset = 0x10c, |
| .cmd = BIT(12), |
| .pid_mask = GENMASK(6, 0), |
| .div_mask = GENMASK(17, 16), |
| }; |
| |
| static const struct { |
| char *n; |
| char *p; |
| unsigned long flags; |
| u8 id; |
| } sama5d3_systemck[] = { |
| /* |
| * ddrck feeds DDR controller and is enabled by bootloader thus we need |
| * to keep it enabled in case there is no Linux consumer for it. |
| */ |
| { .n = "ddrck", .p = "masterck_div", .id = 2, .flags = CLK_IS_CRITICAL }, |
| { .n = "lcdck", .p = "masterck_div", .id = 3 }, |
| { .n = "smdck", .p = "smdclk", .id = 4 }, |
| { .n = "uhpck", .p = "usbck", .id = 6 }, |
| { .n = "udpck", .p = "usbck", .id = 7 }, |
| { .n = "pck0", .p = "prog0", .id = 8 }, |
| { .n = "pck1", .p = "prog1", .id = 9 }, |
| { .n = "pck2", .p = "prog2", .id = 10 }, |
| }; |
| |
| static const struct { |
| char *n; |
| u8 id; |
| struct clk_range r; |
| unsigned long flags; |
| } sama5d3_periphck[] = { |
| { .n = "dbgu_clk", .id = 2, }, |
| { .n = "hsmc_clk", .id = 5, }, |
| { .n = "pioA_clk", .id = 6, }, |
| { .n = "pioB_clk", .id = 7, }, |
| { .n = "pioC_clk", .id = 8, }, |
| { .n = "pioD_clk", .id = 9, }, |
| { .n = "pioE_clk", .id = 10, }, |
| { .n = "usart0_clk", .id = 12, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "usart1_clk", .id = 13, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "usart2_clk", .id = 14, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "usart3_clk", .id = 15, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "uart0_clk", .id = 16, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "uart1_clk", .id = 17, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "twi0_clk", .id = 18, .r = { .min = 0, .max = 41500000 }, }, |
| { .n = "twi1_clk", .id = 19, .r = { .min = 0, .max = 41500000 }, }, |
| { .n = "twi2_clk", .id = 20, .r = { .min = 0, .max = 41500000 }, }, |
| { .n = "mci0_clk", .id = 21, }, |
| { .n = "mci1_clk", .id = 22, }, |
| { .n = "mci2_clk", .id = 23, }, |
| { .n = "spi0_clk", .id = 24, .r = { .min = 0, .max = 166000000 }, }, |
| { .n = "spi1_clk", .id = 25, .r = { .min = 0, .max = 166000000 }, }, |
| { .n = "tcb0_clk", .id = 26, .r = { .min = 0, .max = 166000000 }, }, |
| { .n = "tcb1_clk", .id = 27, .r = { .min = 0, .max = 166000000 }, }, |
| { .n = "pwm_clk", .id = 28, }, |
| { .n = "adc_clk", .id = 29, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "dma0_clk", .id = 30, }, |
| { .n = "dma1_clk", .id = 31, }, |
| { .n = "uhphs_clk", .id = 32, }, |
| { .n = "udphs_clk", .id = 33, }, |
| { .n = "macb0_clk", .id = 34, }, |
| { .n = "macb1_clk", .id = 35, }, |
| { .n = "lcdc_clk", .id = 36, }, |
| { .n = "isi_clk", .id = 37, }, |
| { .n = "ssc0_clk", .id = 38, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "ssc1_clk", .id = 39, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "can0_clk", .id = 40, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "can1_clk", .id = 41, .r = { .min = 0, .max = 83000000 }, }, |
| { .n = "sha_clk", .id = 42, }, |
| { .n = "aes_clk", .id = 43, }, |
| { .n = "tdes_clk", .id = 44, }, |
| { .n = "trng_clk", .id = 45, }, |
| { .n = "fuse_clk", .id = 48, }, |
| /* |
| * mpddr_clk feeds DDR controller and is enabled by bootloader thus we |
| * need to keep it enabled in case there is no Linux consumer for it. |
| */ |
| { .n = "mpddr_clk", .id = 49, .flags = CLK_IS_CRITICAL }, |
| }; |
| |
| static void __init sama5d3_pmc_setup(struct device_node *np) |
| { |
| const char *slck_name, *mainxtal_name; |
| struct pmc_data *sama5d3_pmc; |
| const char *parent_names[5]; |
| struct regmap *regmap; |
| struct clk_hw *hw; |
| int i; |
| bool bypass; |
| |
| i = of_property_match_string(np, "clock-names", "slow_clk"); |
| if (i < 0) |
| return; |
| |
| slck_name = of_clk_get_parent_name(np, i); |
| |
| i = of_property_match_string(np, "clock-names", "main_xtal"); |
| if (i < 0) |
| return; |
| mainxtal_name = of_clk_get_parent_name(np, i); |
| |
| regmap = device_node_to_regmap(np); |
| if (IS_ERR(regmap)) |
| return; |
| |
| sama5d3_pmc = pmc_data_allocate(PMC_PLLACK + 1, |
| nck(sama5d3_systemck), |
| nck(sama5d3_periphck), 0, 3); |
| if (!sama5d3_pmc) |
| return; |
| |
| hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000, |
| 50000000); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| bypass = of_property_read_bool(np, "atmel,osc-bypass"); |
| |
| hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, |
| bypass); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| parent_names[0] = "main_rc_osc"; |
| parent_names[1] = "main_osc"; |
| hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0, |
| &sama5d3_pll_layout, &plla_characteristics); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack"); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| sama5d3_pmc->chws[PMC_PLLACK] = hw; |
| |
| hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck"); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| sama5d3_pmc->chws[PMC_UTMI] = hw; |
| |
| parent_names[0] = slck_name; |
| parent_names[1] = "mainck"; |
| parent_names[2] = "plladivck"; |
| parent_names[3] = "utmick"; |
| hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, |
| parent_names, |
| &at91sam9x5_master_layout, |
| &mck_characteristics, &mck_lock); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| hw = at91_clk_register_master_div(regmap, "masterck_div", |
| "masterck_pres", |
| &at91sam9x5_master_layout, |
| &mck_characteristics, &mck_lock, |
| CLK_SET_RATE_GATE, 0); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| sama5d3_pmc->chws[PMC_MCK] = hw; |
| |
| parent_names[0] = "plladivck"; |
| parent_names[1] = "utmick"; |
| hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| hw = at91sam9x5_clk_register_smd(regmap, "smdclk", parent_names, 2); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| parent_names[0] = slck_name; |
| parent_names[1] = "mainck"; |
| parent_names[2] = "plladivck"; |
| parent_names[3] = "utmick"; |
| parent_names[4] = "masterck_div"; |
| for (i = 0; i < 3; i++) { |
| char name[6]; |
| |
| snprintf(name, sizeof(name), "prog%d", i); |
| |
| hw = at91_clk_register_programmable(regmap, name, |
| parent_names, 5, i, |
| &at91sam9x5_programmable_layout, |
| NULL); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| sama5d3_pmc->pchws[i] = hw; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(sama5d3_systemck); i++) { |
| hw = at91_clk_register_system(regmap, sama5d3_systemck[i].n, |
| sama5d3_systemck[i].p, |
| sama5d3_systemck[i].id, |
| sama5d3_systemck[i].flags); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| sama5d3_pmc->shws[sama5d3_systemck[i].id] = hw; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(sama5d3_periphck); i++) { |
| hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, |
| &sama5d3_pcr_layout, |
| sama5d3_periphck[i].n, |
| "masterck_div", |
| sama5d3_periphck[i].id, |
| &sama5d3_periphck[i].r, |
| INT_MIN, |
| sama5d3_periphck[i].flags); |
| if (IS_ERR(hw)) |
| goto err_free; |
| |
| sama5d3_pmc->phws[sama5d3_periphck[i].id] = hw; |
| } |
| |
| of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d3_pmc); |
| |
| return; |
| |
| err_free: |
| kfree(sama5d3_pmc); |
| } |
| /* |
| * The TCB is used as the clocksource so its clock is needed early. This means |
| * this can't be a platform driver. |
| */ |
| CLK_OF_DECLARE(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup); |